Object tracking,an important technology in the field of image processing and computer vision,is used to continuously track a specific object or person in an image.This technology may be effective in identifying the sa...Object tracking,an important technology in the field of image processing and computer vision,is used to continuously track a specific object or person in an image.This technology may be effective in identifying the same person within one image,but it has limitations in handling multiple images owing to the difficulty in identifying whether the object appearing in other images is the same.When tracking the same object using two or more images,there must be a way to determine that objects existing in different images are the same object.Therefore,this paper attempts to determine the same object present in different images using color information among the unique information of the object.Thus,this study proposes a multiple-object-tracking method using histogram stamp extraction in closed-circuit television applications.The proposed method determines the presence or absence of a target object in an image by comparing the similarity between the image containing the target object and other images.To this end,a unique color value of the target object is extracted based on its color distribution in the image using three methods:mean,mode,and interquartile range.The Top-N accuracy method is used to analyze the accuracy of each method,and the results show that the mean method had an accuracy of 93.5%(Top-2).Furthermore,the positive prediction value experimental results show that the accuracy of the mean method was 65.7%.As a result of the analysis,it is possible to detect and track the same object present in different images using the unique color of the object.Through the results,it is possible to track the same object that can minimize manpower without using personal information when detecting objects in different images.In the last response speed experiment,it was shown that when the mean was used,the color extraction of the object was possible in real time with 0.016954 s.Through this,it is possible to detect and track the same object in real time when using the proposed method.展开更多
The field of object tracking has recently made significant progress.Particularly,the performance results in both deep learning and correlation filters,based trackers achieved effective tracking performance.Moreover,th...The field of object tracking has recently made significant progress.Particularly,the performance results in both deep learning and correlation filters,based trackers achieved effective tracking performance.Moreover,there are still some difficulties with object tracking for example illumination and deformation(DEF).The precision and accuracy of tracking algorithms suffer from the effects of such occurrences.For this situation,finding a solution is important.This research proposes a new tracking algorithm to handle this problem.The features are extracted by using Modified LeNet-5,and the precision and accuracy are improved by developing the Real-Time Cross-modality Correlation Filtering method(RCCF).In Modified LeNet-5,the visual tracking performance is improved by adjusting the number and size of the convolution kernels in the pooling and convolution layers.The high-level,middle-level,and handcraft features are extracted from the modified LeNet-5 network.The handcraft features are used to determine the specific location of the target because the handcraft features contain more spatial information regarding the visual object.The LeNet features are more suitable for a target appearance change in object tracking.Extensive experiments were conducted by the Object Tracking Benchmarking(OTB)databases like OTB50 and OTB100.The experimental results reveal that the proposed tracker outperforms other state-of-the-art trackers under different problems.The experimental simulation is carried out in python.The overall success rate and precision of the proposed algorithm are 93.8%and 92.5%.The average running frame rate reaches 42 frames per second,which can meet the real-time requirements.展开更多
Aiming at the problem that a single correlation filter model is sensitive to complex scenes such as background interference and occlusion,a tracking algorithm based on multi-time-space perception and instance-specific...Aiming at the problem that a single correlation filter model is sensitive to complex scenes such as background interference and occlusion,a tracking algorithm based on multi-time-space perception and instance-specific proposals is proposed to optimize the mathematical model of the correlation filter(CF).Firstly,according to the consistency of the changes between the object frames and the filter frames,the mask matrix is introduced into the objective function of the filter,so as to extract the spatio-temporal information of the object with background awareness.Secondly,the object function of multi-feature fusion is constructed for the object location,which is optimized by the Lagrange method and solved by closed iteration.In the process of filter optimization,the constraints term of time-space perception is designed to enhance the learning ability of the CF to optimize the final track-ing results.Finally,when the tracking results fluctuate,the boundary suppres-sion factor is introduced into the instance-specific proposals to reduce the risk of model drift effectively.The accuracy and success rate of the proposed algorithm are verified by simulation analysis on two popular benchmarks,the object tracking benchmark 2015(OTB2015)and the temple color 128(TC-128).Extensive experimental results illustrate that the optimized appearance model of the proposed algorithm is effective.The distance precision rate and overlap success rate of the proposed algorithm are 0.756 and 0.656 on the OTB2015 benchmark,which are better than the results of other competing algorithms.The results of this study can solve the problem of real-time object tracking in the real traffic environment and provide a specific reference for the detection of traffic abnormalities.展开更多
This paper discusses about the new approach of multiple object track-ing relative to background information.The concept of multiple object tracking through background learning is based upon the theory of relativity,th...This paper discusses about the new approach of multiple object track-ing relative to background information.The concept of multiple object tracking through background learning is based upon the theory of relativity,that involves a frame of reference in spatial domain to localize and/or track any object.Thefield of multiple object tracking has seen a lot of research,but researchers have considered the background as redundant.However,in object tracking,the back-ground plays a vital role and leads to definite improvement in the overall process of tracking.In the present work an algorithm is proposed for the multiple object tracking through background learning.The learning framework is based on graph embedding approach for localizing multiple objects.The graph utilizes the inher-ent capabilities of depth modelling that assist in prior to track occlusion avoidance among multiple objects.The proposed algorithm has been compared with the recent work available in literature on numerous performance evaluation measures.It is observed that our proposed algorithm gives better performance.展开更多
The amount of needed control messages in wireless sensor networks(WSN)is affected by the storage strategy of detected events.Because broadcasting superfluous control messages consumes excess energy,the network lifespa...The amount of needed control messages in wireless sensor networks(WSN)is affected by the storage strategy of detected events.Because broadcasting superfluous control messages consumes excess energy,the network lifespan can be extended if the quantity of control messages is decreased.In this study,an optimized storage technique having low control overhead for tracking the objects in WSN is introduced.The basic concept is to retain observed events in internal memory and preserve the relationship between sensed information and sensor nodes using a novel inexpensive data structure entitled Ordered Binary Linked List(OBLL).Whenever an object passes over the sensor area,the recognizing sensor can immediately produce an OBLL along the object’s route.To retrieve the entire information,the OBLL can be traversed with logarithmic complexity which is much less than the traversing complexity of existing linked list structures.Performance evaluation and simulations were carried out to ensure that the suggested technique minimizes the number of messages and thus saving energy and extending the network life.展开更多
This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influ...This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influence the durability and reliability of mechanical systems or structures and cause problems such as damage,abnormal stopping,and disaster.Recent research failed to improve the accuracy rate and the computation time in tracking an object and in the vibration measurement.To solve all these problems,this proposed research simplifies the scaling factor determination by assigning a known real-world dimension to a predetermined portion of the image.A novel white color sticker of the known dimensions marked with a color dot is pasted on the surface of an object for the best result in the template matching using the Improved Up-Sampled Cross-Correlation(UCC)algorithm.The vibration measurement is calculated using the Finite-Difference Algorithm(FDA),a machine vision systemfitted with a macro lens sensor that is capable of capturing the image at a closer range,which does not affect the quality of displacement measurement from the video frames.Thefield test was conducted on the TAFE(Tractors and Farm Equipment Limited)tractor parts,and the percentage of error was recorded between 30%and 50%at very low vibration values close to zero,whereas it was recorded between 5%and 10%error in most high-accelerations,the essential range for vibration analysis.Finally,the suggested system is more suitable for measuring the vibration of stationary machinery having low frequency ranges.The use of a macro lens enables to capture of image frames at very close-ups.A 30%to 50%error percentage has been reported when the vibration amplitude is very small.Therefore,this study is not suitable for Nano vibration analysis.展开更多
On grounds of the advent of real-time applications,like autonomous driving,visual surveillance,and sports analysis,there is an augmenting focus of attention towards Multiple-Object Tracking(MOT).The tracking-by-detect...On grounds of the advent of real-time applications,like autonomous driving,visual surveillance,and sports analysis,there is an augmenting focus of attention towards Multiple-Object Tracking(MOT).The tracking-by-detection paradigm,a commonly utilized approach,connects the existing recognition hypotheses to the formerly assessed object trajectories by comparing the simila-rities of the appearance or the motion between them.For an efficient detection and tracking of the numerous objects in a complex environment,a Pearson Simi-larity-centred Kuhn-Munkres(PS-KM)algorithm was proposed in the present study.In this light,the input videos were,initially,gathered from the MOT dataset and converted into frames.The background subtraction occurred whichfiltered the inappropriate data concerning the frames after the frame conversion stage.Then,the extraction of features from the frames was executed.Afterwards,the higher dimensional features were transformed into lower-dimensional features,and feature reduction process was performed with the aid of Information Gain-centred Singular Value Decomposition(IG-SVD).Next,using the Modified Recurrent Neural Network(MRNN)method,classification was executed which identified the categories of the objects additionally.The PS-KM algorithm identi-fied that the recognized objects were tracked.Finally,the experimental outcomes exhibited that numerous targets were precisely tracked by the proposed system with 97%accuracy with a low false positive rate(FPR)of 2.3%.It was also proved that the present techniques viz.RNN,CNN,and KNN,were effective with regard to the existing models.展开更多
To improve the transient stability of multimachine power systems,observational linearization and tracking objective excitation control laws were derived from the phasor measurement unit(PMU),observational linearizatio...To improve the transient stability of multimachine power systems,observational linearization and tracking objective excitation control laws were derived from the phasor measurement unit(PMU),observational linearization,and tracking objective control theory based on synchronized coordinates and reference generator coordinates.The control strategies utilized real-time state variables obtained by PMU to linearize the state equations of the system,and then the linear optimal control strategy was used to design excitation controllers.The inaccuracy of the local linearization method and the complexity of the system models designed in the exact linearization method for nonlinear systems were avoided.Therefore,the control strategies were applied in real time.Simulation results show that the proposed method can improve the transient stability of power systems more efficiently than nonlinear optimal excitation control.展开更多
There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most ...There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most challenging problems.In this paper,we present a visual object tracking and servoing control system utilizing a tailor-made 38 g nano-scale quadrotor.A lightweight visual module is integrated to enable object tracking capabilities,and a micro positioning deck is mounted to provide accurate pose estimation.In order to be robust against object appearance variations,a novel object tracking algorithm,denoted by RMCTer,is proposed,which integrates a powerful short-term tracking module and an efficient long-term processing module.In particular,the long-term processing module can provide additional object information and modify the short-term tracking model in a timely manner.Furthermore,a positionbased visual servoing control method is proposed for the quadrotor,where an adaptive tracking controller is designed by leveraging backstepping and adaptive techniques.Stable and accurate object tracking is achieved even under disturbances.Experimental results are presented to demonstrate the high accuracy and stability of the whole tracking system.展开更多
This paper describes a new framework for object detection and tracking of AUV including underwater acoustic data interpolation, underwater acoustic images segmentation and underwater objects tracking. This framework i...This paper describes a new framework for object detection and tracking of AUV including underwater acoustic data interpolation, underwater acoustic images segmentation and underwater objects tracking. This framework is applied to the design of vision-based method for AUV based on the forward looking sonar sensor. First, the real-time data flow (underwater acoustic images) is pre-processed to form the whole underwater acoustic image, and the relevant position information of objects is extracted and determined. An improved method of double threshold segmentation is proposed to resolve the problem that the threshold cannot be adjusted adaptively in the traditional method. Second, a representation of region information is created in light of the Gaussian particle filter. The weighted integration strategy combining the area and invariant moment is proposed to perfect the weight of particles and to enhance the tracking robustness. Results obtained on the real acoustic vision platform of AUV during sea trials are displayed and discussed. They show that the proposed method can detect and track the moving objects underwater online, and it is effective and robust.展开更多
Collaborative Robotics is one of the high-interest research topics in the area of academia and industry.It has been progressively utilized in numerous applications,particularly in intelligent surveillance systems.It a...Collaborative Robotics is one of the high-interest research topics in the area of academia and industry.It has been progressively utilized in numerous applications,particularly in intelligent surveillance systems.It allows the deployment of smart cameras or optical sensors with computer vision techniques,which may serve in several object detection and tracking tasks.These tasks have been considered challenging and high-level perceptual problems,frequently dominated by relative information about the environment,where main concerns such as occlusion,illumination,background,object deformation,and object class variations are commonplace.In order to show the importance of top view surveillance,a collaborative robotics framework has been presented.It can assist in the detection and tracking of multiple objects in top view surveillance.The framework consists of a smart robotic camera embedded with the visual processing unit.The existing pre-trained deep learning models named SSD and YOLO has been adopted for object detection and localization.The detection models are further combined with different tracking algorithms,including GOTURN,MEDIANFLOW,TLD,KCF,MIL,and BOOSTING.These algorithms,along with detection models,help to track and predict the trajectories of detected objects.The pre-trained models are employed;therefore,the generalization performance is also investigated through testing the models on various sequences of top view data set.The detection models achieved maximum True Detection Rate 93%to 90%with a maximum 0.6%False Detection Rate.The tracking results of different algorithms are nearly identical,with tracking accuracy ranging from 90%to 94%.Furthermore,a discussion has been carried out on output results along with future guidelines.展开更多
Inspired by human behaviors, a robot object tracking model is proposed on the basis of visual attention mechanism, which is fit for the theory of topological perception. The model integrates the image-driven, bottom-u...Inspired by human behaviors, a robot object tracking model is proposed on the basis of visual attention mechanism, which is fit for the theory of topological perception. The model integrates the image-driven, bottom-up attention and the object-driven, top-down attention, whereas the previous attention model has mostly focused on either the bottom-up or top-down attention. By the bottom-up component, the whole scene is segmented into the ground region and the salient regions. Guided by top-down strategy which is achieved by a topological graph, the object regions are separated from the salient regions. The salient regions except the object regions are the barrier regions. In order to estimate the model, a mobile robot platform is developed, on which some experiments are implemented. The experimental results indicate that processing an image with a resolution of 752 × 480 pixels takes less than 200 ms and the object regions are unabridged. The analysis obtained by comparing the proposed model with the existing model demonstrates that the proposed model has some advantages in robot object tracking in terms of speed and efficiency.展开更多
A method for moving object recognition and tracking in the intelligent traffic monitoring system is presented. For the shortcomings and deficiencies of the frame-subtraction method, a redundant discrete wavelet transf...A method for moving object recognition and tracking in the intelligent traffic monitoring system is presented. For the shortcomings and deficiencies of the frame-subtraction method, a redundant discrete wavelet transform (RDWT) based moving object recognition algorithm is put forward, which directly detects moving objects in the redundant discrete wavelet transform domain. An improved adaptive mean-shift algorithm is used to track the moving object in the follow up frames. Experimental results show that the algorithm can effectively extract the moving object, even though the object is similar to the background, and the results are better than the traditional frame-subtraction method. The object tracking is accurate without the impact of changes in the size of the object. Therefore the algorithm has a certain practical value and prospect.展开更多
An object model-based tracking method is useful for tracking multiple objects, but the main difficulties are modeling objects reliably and tracking objects via models in successive frames. An effective tracking method...An object model-based tracking method is useful for tracking multiple objects, but the main difficulties are modeling objects reliably and tracking objects via models in successive frames. An effective tracking method using the object models is proposed to track multiple objects in a real-time visual surveillance system. Firstly, for detecting objects, an adaptive kernel density estimation method is utilized, which uses an adaptive bandwidth and features combining colour and gradient. Secondly, some models of objects are built for describing motion, shape and colour features. Then, a matching matrix is formed to analyze tracking situations. If objects are tracked under occlusions, the optimal "visual" object is found to represent the occluded object, and the posterior probability of pixel is used to determine which pixel is utilized for updating object models. Extensive experiments show that this method improves the accuracy and validity of tracking objects even under occlusions and is used in real-time visual surveillance systems.展开更多
Video object tracking is an important research topic of computer vision, whichfinds a wide range of applications in video surveillance, robotics, human-computerinteraction and so on. Although many moving object tracki...Video object tracking is an important research topic of computer vision, whichfinds a wide range of applications in video surveillance, robotics, human-computerinteraction and so on. Although many moving object tracking algorithms have beenproposed, there are still many difficulties in the actual tracking process, such asillumination change, occlusion, motion blurring, scale change, self-change and so on.Therefore, the development of object tracking technology is still challenging. Theemergence of deep learning theory and method provides a new opportunity for theresearch of object tracking, and it is also the main theoretical framework for the researchof moving object tracking algorithm in this paper. In this paper, the existing deeptracking-based target tracking algorithms are classified and sorted out. Based on theprevious knowledge and my own understanding, several solutions are proposed for theexisting methods. In addition, the existing deep learning target tracking method is stilldifficult to meet the requirements of real-time, how to design the network and trackingprocess to achieve speed and effect improvement, there is still a lot of research space.展开更多
On accomplishing an efficacious object tracking,the activity of an object concerned becomes notified in a forthright manner.An accurate form of object tracking task necessitates a robust object tracking procedures irr...On accomplishing an efficacious object tracking,the activity of an object concerned becomes notified in a forthright manner.An accurate form of object tracking task necessitates a robust object tracking procedures irrespective of hardware assistance.Such approaches inferred a vast computational complexity to track an object with high accuracy in a stipulated amount of processing time.On the other hand,the tracking gets affected owing to the existence of varied quality diminishing factors such as occlusion,illumination changes,shadows etc.,In order to rectify all these inadequacies in tracking an object,a novel background normalization procedure articulated on the basis of a textural pattern is proposed in this paper.After preprocessing an acquired image,employment of an Environmental Succession Prediction algorithm for discriminating disparate background environment by background clustering approach have been accomplished.Afterward,abstract textural characterizations through utilization of a Probability based Gradient Pattern(PGP)approach for recognizing the similarity between patterns obtained so far.Comparison between standardized frame obtained in prior and those processed patterns detects the motion exposed by an object and the object concerned gets identified within a blob.Hence,the system is resistant towards illumination variations.These illumination variation was interpreted in object tracking residing within a dynamic background.Devised approach certainly outperforms other object tracking methodologies like Group Target Tracking(GTT),Vi PER-GT,grabcut,snakes in terms of accuracy and average time.Proposed PGP-based pattern texture analysis is compared with Gamifying Video Object(GVO)approach and hence,it evidently outperforms in terms of precision,recall and F1 measure.展开更多
In this paper, a novel object tracking based on a particle filter and speeded up robust feature (SURF) is proposed, which uses both color and SURF features. The SURF feature makes the tracking result more robust. On...In this paper, a novel object tracking based on a particle filter and speeded up robust feature (SURF) is proposed, which uses both color and SURF features. The SURF feature makes the tracking result more robust. On the other hand, the particle selection can lead to save time. In addition, we also consider the matched particle applicable to calculating the SURF weight. Owing to the color, spatial, and SURF features being adopted, this method is more robust than the traditional color-based appearance model. Experimental results demonstrate the robustness and accurate tracking results with challenging sequences. Besides, the proposed method outperforms other methods during the intersection of similar color and object's partial occlusion.展开更多
Object tracking with abrupt motion is an important research topic and has attracted wide attention.To obtain accurate tracking results,an improved particle filter tracking algorithm based on sparse representation and ...Object tracking with abrupt motion is an important research topic and has attracted wide attention.To obtain accurate tracking results,an improved particle filter tracking algorithm based on sparse representation and nonlinear resampling is proposed in this paper. First,the sparse representation is used to compute particle weights by considering the fact that the weights are sparse when the object moves abruptly,so the potential object region can be predicted more precisely. Then,a nonlinear resampling process is proposed by utilizing the nonlinear sorting strategy,which can solve the problem of particle diversity impoverishment caused by traditional resampling methods. Experimental results based on videos containing objects with various abrupt motions have demonstrated the effectiveness of the proposed algorithm.展开更多
In YCbCr colorspace, a method is proposed to reconstruct the background and extract moving objects based on the Gaussian model of chroma components. Background model is updated according to changes of chroma component...In YCbCr colorspace, a method is proposed to reconstruct the background and extract moving objects based on the Gaussian model of chroma components. Background model is updated according to changes of chroma components. In order to eliminate the disturbance of shadow, a shadow detecting principle is proposed in YCbCr colorspace. A Kalman filter is introduced to estimate objects' positions in the image and then the pedestrian is tracked according to its information of shape. Experiments show that the background reconstruction and updating are successful, object extraction and shadow suppression are satisfactory, and real-time and reliable tracking is realized.展开更多
Unmanned aerial vehicles(UAVs)can be used to monitor traffic in a variety of settings,including security,traffic surveillance,and traffic control.Numerous academics have been drawn to this topic because of the challen...Unmanned aerial vehicles(UAVs)can be used to monitor traffic in a variety of settings,including security,traffic surveillance,and traffic control.Numerous academics have been drawn to this topic because of the challenges and the large variety of applications.This paper proposes a new and efficient vehicle detection and tracking system that is based on road extraction and identifying objects on it.It is inspired by existing detection systems that comprise stationary data collectors such as induction loops and stationary cameras that have a limited field of view and are not mobile.The goal of this study is to develop a method that first extracts the region of interest(ROI),then finds and tracks the items of interest.The suggested system is divided into six stages.The photos from the obtained dataset are appropriately georeferenced to their actual locations in the first phase,after which they are all co-registered.The ROI,or road and its objects,are retrieved using the GrabCut method in the second phase.The third phase entails data preparation.The segmented images’noise is eliminated using Gaussian blur,after which the images are changed to grayscale and forwarded to the following stage for additional morphological procedures.The YOLOv3 algorithm is used in the fourth step to find any automobiles in the photos.Following that,the Kalman filter and centroid tracking are used to perform the tracking of the detected cars.The Lucas-Kanade method is then used to perform the trajectory analysis on the vehicles.The suggested model is put to the test and assessed using the Vehicle Aerial Imaging from Drone(VAID)dataset.For detection and tracking,the model was able to attain accuracy levels of 96.7%and 91.6%,respectively.展开更多
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1F1A1068828).
文摘Object tracking,an important technology in the field of image processing and computer vision,is used to continuously track a specific object or person in an image.This technology may be effective in identifying the same person within one image,but it has limitations in handling multiple images owing to the difficulty in identifying whether the object appearing in other images is the same.When tracking the same object using two or more images,there must be a way to determine that objects existing in different images are the same object.Therefore,this paper attempts to determine the same object present in different images using color information among the unique information of the object.Thus,this study proposes a multiple-object-tracking method using histogram stamp extraction in closed-circuit television applications.The proposed method determines the presence or absence of a target object in an image by comparing the similarity between the image containing the target object and other images.To this end,a unique color value of the target object is extracted based on its color distribution in the image using three methods:mean,mode,and interquartile range.The Top-N accuracy method is used to analyze the accuracy of each method,and the results show that the mean method had an accuracy of 93.5%(Top-2).Furthermore,the positive prediction value experimental results show that the accuracy of the mean method was 65.7%.As a result of the analysis,it is possible to detect and track the same object present in different images using the unique color of the object.Through the results,it is possible to track the same object that can minimize manpower without using personal information when detecting objects in different images.In the last response speed experiment,it was shown that when the mean was used,the color extraction of the object was possible in real time with 0.016954 s.Through this,it is possible to detect and track the same object in real time when using the proposed method.
文摘The field of object tracking has recently made significant progress.Particularly,the performance results in both deep learning and correlation filters,based trackers achieved effective tracking performance.Moreover,there are still some difficulties with object tracking for example illumination and deformation(DEF).The precision and accuracy of tracking algorithms suffer from the effects of such occurrences.For this situation,finding a solution is important.This research proposes a new tracking algorithm to handle this problem.The features are extracted by using Modified LeNet-5,and the precision and accuracy are improved by developing the Real-Time Cross-modality Correlation Filtering method(RCCF).In Modified LeNet-5,the visual tracking performance is improved by adjusting the number and size of the convolution kernels in the pooling and convolution layers.The high-level,middle-level,and handcraft features are extracted from the modified LeNet-5 network.The handcraft features are used to determine the specific location of the target because the handcraft features contain more spatial information regarding the visual object.The LeNet features are more suitable for a target appearance change in object tracking.Extensive experiments were conducted by the Object Tracking Benchmarking(OTB)databases like OTB50 and OTB100.The experimental results reveal that the proposed tracker outperforms other state-of-the-art trackers under different problems.The experimental simulation is carried out in python.The overall success rate and precision of the proposed algorithm are 93.8%and 92.5%.The average running frame rate reaches 42 frames per second,which can meet the real-time requirements.
基金funded by the Basic Science Major Foundation(Natural Science)of the Jiangsu Higher Education Institutions of China(Grant:22KJA520012)the Xuzhou Science and Technology Plan Project(Grant:KC21303,KC22305)the sixth“333 project”of Jiangsu Province.
文摘Aiming at the problem that a single correlation filter model is sensitive to complex scenes such as background interference and occlusion,a tracking algorithm based on multi-time-space perception and instance-specific proposals is proposed to optimize the mathematical model of the correlation filter(CF).Firstly,according to the consistency of the changes between the object frames and the filter frames,the mask matrix is introduced into the objective function of the filter,so as to extract the spatio-temporal information of the object with background awareness.Secondly,the object function of multi-feature fusion is constructed for the object location,which is optimized by the Lagrange method and solved by closed iteration.In the process of filter optimization,the constraints term of time-space perception is designed to enhance the learning ability of the CF to optimize the final track-ing results.Finally,when the tracking results fluctuate,the boundary suppres-sion factor is introduced into the instance-specific proposals to reduce the risk of model drift effectively.The accuracy and success rate of the proposed algorithm are verified by simulation analysis on two popular benchmarks,the object tracking benchmark 2015(OTB2015)and the temple color 128(TC-128).Extensive experimental results illustrate that the optimized appearance model of the proposed algorithm is effective.The distance precision rate and overlap success rate of the proposed algorithm are 0.756 and 0.656 on the OTB2015 benchmark,which are better than the results of other competing algorithms.The results of this study can solve the problem of real-time object tracking in the real traffic environment and provide a specific reference for the detection of traffic abnormalities.
文摘This paper discusses about the new approach of multiple object track-ing relative to background information.The concept of multiple object tracking through background learning is based upon the theory of relativity,that involves a frame of reference in spatial domain to localize and/or track any object.Thefield of multiple object tracking has seen a lot of research,but researchers have considered the background as redundant.However,in object tracking,the back-ground plays a vital role and leads to definite improvement in the overall process of tracking.In the present work an algorithm is proposed for the multiple object tracking through background learning.The learning framework is based on graph embedding approach for localizing multiple objects.The graph utilizes the inher-ent capabilities of depth modelling that assist in prior to track occlusion avoidance among multiple objects.The proposed algorithm has been compared with the recent work available in literature on numerous performance evaluation measures.It is observed that our proposed algorithm gives better performance.
文摘The amount of needed control messages in wireless sensor networks(WSN)is affected by the storage strategy of detected events.Because broadcasting superfluous control messages consumes excess energy,the network lifespan can be extended if the quantity of control messages is decreased.In this study,an optimized storage technique having low control overhead for tracking the objects in WSN is introduced.The basic concept is to retain observed events in internal memory and preserve the relationship between sensed information and sensor nodes using a novel inexpensive data structure entitled Ordered Binary Linked List(OBLL).Whenever an object passes over the sensor area,the recognizing sensor can immediately produce an OBLL along the object’s route.To retrieve the entire information,the OBLL can be traversed with logarithmic complexity which is much less than the traversing complexity of existing linked list structures.Performance evaluation and simulations were carried out to ensure that the suggested technique minimizes the number of messages and thus saving energy and extending the network life.
文摘This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influence the durability and reliability of mechanical systems or structures and cause problems such as damage,abnormal stopping,and disaster.Recent research failed to improve the accuracy rate and the computation time in tracking an object and in the vibration measurement.To solve all these problems,this proposed research simplifies the scaling factor determination by assigning a known real-world dimension to a predetermined portion of the image.A novel white color sticker of the known dimensions marked with a color dot is pasted on the surface of an object for the best result in the template matching using the Improved Up-Sampled Cross-Correlation(UCC)algorithm.The vibration measurement is calculated using the Finite-Difference Algorithm(FDA),a machine vision systemfitted with a macro lens sensor that is capable of capturing the image at a closer range,which does not affect the quality of displacement measurement from the video frames.Thefield test was conducted on the TAFE(Tractors and Farm Equipment Limited)tractor parts,and the percentage of error was recorded between 30%and 50%at very low vibration values close to zero,whereas it was recorded between 5%and 10%error in most high-accelerations,the essential range for vibration analysis.Finally,the suggested system is more suitable for measuring the vibration of stationary machinery having low frequency ranges.The use of a macro lens enables to capture of image frames at very close-ups.A 30%to 50%error percentage has been reported when the vibration amplitude is very small.Therefore,this study is not suitable for Nano vibration analysis.
文摘On grounds of the advent of real-time applications,like autonomous driving,visual surveillance,and sports analysis,there is an augmenting focus of attention towards Multiple-Object Tracking(MOT).The tracking-by-detection paradigm,a commonly utilized approach,connects the existing recognition hypotheses to the formerly assessed object trajectories by comparing the simila-rities of the appearance or the motion between them.For an efficient detection and tracking of the numerous objects in a complex environment,a Pearson Simi-larity-centred Kuhn-Munkres(PS-KM)algorithm was proposed in the present study.In this light,the input videos were,initially,gathered from the MOT dataset and converted into frames.The background subtraction occurred whichfiltered the inappropriate data concerning the frames after the frame conversion stage.Then,the extraction of features from the frames was executed.Afterwards,the higher dimensional features were transformed into lower-dimensional features,and feature reduction process was performed with the aid of Information Gain-centred Singular Value Decomposition(IG-SVD).Next,using the Modified Recurrent Neural Network(MRNN)method,classification was executed which identified the categories of the objects additionally.The PS-KM algorithm identi-fied that the recognized objects were tracked.Finally,the experimental outcomes exhibited that numerous targets were precisely tracked by the proposed system with 97%accuracy with a low false positive rate(FPR)of 2.3%.It was also proved that the present techniques viz.RNN,CNN,and KNN,were effective with regard to the existing models.
基金supported by the National Natural Science Foundation of China(Grant No.50595410).
文摘To improve the transient stability of multimachine power systems,observational linearization and tracking objective excitation control laws were derived from the phasor measurement unit(PMU),observational linearization,and tracking objective control theory based on synchronized coordinates and reference generator coordinates.The control strategies utilized real-time state variables obtained by PMU to linearize the state equations of the system,and then the linear optimal control strategy was used to design excitation controllers.The inaccuracy of the local linearization method and the complexity of the system models designed in the exact linearization method for nonlinear systems were avoided.Therefore,the control strategies were applied in real time.Simulation results show that the proposed method can improve the transient stability of power systems more efficiently than nonlinear optimal excitation control.
基金supported in part by the Institute for Guo Qiang of Tsinghua University(2019GQG1023)in part by Graduate Education and Teaching Reform Project of Tsinghua University(202007J007)+1 种基金in part by National Natural Science Foundation of China(U19B2029,62073028,61803222)in part by the Independent Research Program of Tsinghua University(2018Z05JDX002)。
文摘There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most challenging problems.In this paper,we present a visual object tracking and servoing control system utilizing a tailor-made 38 g nano-scale quadrotor.A lightweight visual module is integrated to enable object tracking capabilities,and a micro positioning deck is mounted to provide accurate pose estimation.In order to be robust against object appearance variations,a novel object tracking algorithm,denoted by RMCTer,is proposed,which integrates a powerful short-term tracking module and an efficient long-term processing module.In particular,the long-term processing module can provide additional object information and modify the short-term tracking model in a timely manner.Furthermore,a positionbased visual servoing control method is proposed for the quadrotor,where an adaptive tracking controller is designed by leveraging backstepping and adaptive techniques.Stable and accurate object tracking is achieved even under disturbances.Experimental results are presented to demonstrate the high accuracy and stability of the whole tracking system.
基金supported by the National Natural Science Foundation of China(Grant No.51009040)Heilongjiang Postdoctoral Fund(Grant No.LBH-Z11205)+1 种基金the National High Technology Research and Development Program of China(863 Program,Grant No.2011AA09A106)the China Postdoctoral Science Foundation(Grant No.2012M510928)
文摘This paper describes a new framework for object detection and tracking of AUV including underwater acoustic data interpolation, underwater acoustic images segmentation and underwater objects tracking. This framework is applied to the design of vision-based method for AUV based on the forward looking sonar sensor. First, the real-time data flow (underwater acoustic images) is pre-processed to form the whole underwater acoustic image, and the relevant position information of objects is extracted and determined. An improved method of double threshold segmentation is proposed to resolve the problem that the threshold cannot be adjusted adaptively in the traditional method. Second, a representation of region information is created in light of the Gaussian particle filter. The weighted integration strategy combining the area and invariant moment is proposed to perfect the weight of particles and to enhance the tracking robustness. Results obtained on the real acoustic vision platform of AUV during sea trials are displayed and discussed. They show that the proposed method can detect and track the moving objects underwater online, and it is effective and robust.
基金the Framework of International Cooperation Program managed by the National Research Foundation of Korea(2019K1A3A1A8011295711).
文摘Collaborative Robotics is one of the high-interest research topics in the area of academia and industry.It has been progressively utilized in numerous applications,particularly in intelligent surveillance systems.It allows the deployment of smart cameras or optical sensors with computer vision techniques,which may serve in several object detection and tracking tasks.These tasks have been considered challenging and high-level perceptual problems,frequently dominated by relative information about the environment,where main concerns such as occlusion,illumination,background,object deformation,and object class variations are commonplace.In order to show the importance of top view surveillance,a collaborative robotics framework has been presented.It can assist in the detection and tracking of multiple objects in top view surveillance.The framework consists of a smart robotic camera embedded with the visual processing unit.The existing pre-trained deep learning models named SSD and YOLO has been adopted for object detection and localization.The detection models are further combined with different tracking algorithms,including GOTURN,MEDIANFLOW,TLD,KCF,MIL,and BOOSTING.These algorithms,along with detection models,help to track and predict the trajectories of detected objects.The pre-trained models are employed;therefore,the generalization performance is also investigated through testing the models on various sequences of top view data set.The detection models achieved maximum True Detection Rate 93%to 90%with a maximum 0.6%False Detection Rate.The tracking results of different algorithms are nearly identical,with tracking accuracy ranging from 90%to 94%.Furthermore,a discussion has been carried out on output results along with future guidelines.
基金supported by National Basic Research Program of China (973 Program) (No. 2006CB300407)National Natural Science Foundation of China (No. 50775017)
文摘Inspired by human behaviors, a robot object tracking model is proposed on the basis of visual attention mechanism, which is fit for the theory of topological perception. The model integrates the image-driven, bottom-up attention and the object-driven, top-down attention, whereas the previous attention model has mostly focused on either the bottom-up or top-down attention. By the bottom-up component, the whole scene is segmented into the ground region and the salient regions. Guided by top-down strategy which is achieved by a topological graph, the object regions are separated from the salient regions. The salient regions except the object regions are the barrier regions. In order to estimate the model, a mobile robot platform is developed, on which some experiments are implemented. The experimental results indicate that processing an image with a resolution of 752 × 480 pixels takes less than 200 ms and the object regions are unabridged. The analysis obtained by comparing the proposed model with the existing model demonstrates that the proposed model has some advantages in robot object tracking in terms of speed and efficiency.
文摘A method for moving object recognition and tracking in the intelligent traffic monitoring system is presented. For the shortcomings and deficiencies of the frame-subtraction method, a redundant discrete wavelet transform (RDWT) based moving object recognition algorithm is put forward, which directly detects moving objects in the redundant discrete wavelet transform domain. An improved adaptive mean-shift algorithm is used to track the moving object in the follow up frames. Experimental results show that the algorithm can effectively extract the moving object, even though the object is similar to the background, and the results are better than the traditional frame-subtraction method. The object tracking is accurate without the impact of changes in the size of the object. Therefore the algorithm has a certain practical value and prospect.
基金supported by the National Natural Science Foundation of China(60835004 60775047+2 种基金 60872130)the National High Technology Research and Development Program of China(863 Program)(2007AA04Z244 2008AA04Z214)
文摘An object model-based tracking method is useful for tracking multiple objects, but the main difficulties are modeling objects reliably and tracking objects via models in successive frames. An effective tracking method using the object models is proposed to track multiple objects in a real-time visual surveillance system. Firstly, for detecting objects, an adaptive kernel density estimation method is utilized, which uses an adaptive bandwidth and features combining colour and gradient. Secondly, some models of objects are built for describing motion, shape and colour features. Then, a matching matrix is formed to analyze tracking situations. If objects are tracked under occlusions, the optimal "visual" object is found to represent the occluded object, and the posterior probability of pixel is used to determine which pixel is utilized for updating object models. Extensive experiments show that this method improves the accuracy and validity of tracking objects even under occlusions and is used in real-time visual surveillance systems.
基金supported by National Natural Science Foundationof China (Grant No. 51874300)the National Natural Science Foundation of China andShanxi Provincial People’s Government Jointly Funded Project of China for Coal Baseand Low Carbon (Grant No. U1510115)+2 种基金National Natural Science Foundation of China(51104157)the Qing Lan Project, the China Postdoctoral Science Foundation (Grant No.2013T60574)the Scientific Instrument Developing Project of the Chinese Academy ofSciences (Grant No. YJKYYQ20170074).
文摘Video object tracking is an important research topic of computer vision, whichfinds a wide range of applications in video surveillance, robotics, human-computerinteraction and so on. Although many moving object tracking algorithms have beenproposed, there are still many difficulties in the actual tracking process, such asillumination change, occlusion, motion blurring, scale change, self-change and so on.Therefore, the development of object tracking technology is still challenging. Theemergence of deep learning theory and method provides a new opportunity for theresearch of object tracking, and it is also the main theoretical framework for the researchof moving object tracking algorithm in this paper. In this paper, the existing deeptracking-based target tracking algorithms are classified and sorted out. Based on theprevious knowledge and my own understanding, several solutions are proposed for theexisting methods. In addition, the existing deep learning target tracking method is stilldifficult to meet the requirements of real-time, how to design the network and trackingprocess to achieve speed and effect improvement, there is still a lot of research space.
文摘On accomplishing an efficacious object tracking,the activity of an object concerned becomes notified in a forthright manner.An accurate form of object tracking task necessitates a robust object tracking procedures irrespective of hardware assistance.Such approaches inferred a vast computational complexity to track an object with high accuracy in a stipulated amount of processing time.On the other hand,the tracking gets affected owing to the existence of varied quality diminishing factors such as occlusion,illumination changes,shadows etc.,In order to rectify all these inadequacies in tracking an object,a novel background normalization procedure articulated on the basis of a textural pattern is proposed in this paper.After preprocessing an acquired image,employment of an Environmental Succession Prediction algorithm for discriminating disparate background environment by background clustering approach have been accomplished.Afterward,abstract textural characterizations through utilization of a Probability based Gradient Pattern(PGP)approach for recognizing the similarity between patterns obtained so far.Comparison between standardized frame obtained in prior and those processed patterns detects the motion exposed by an object and the object concerned gets identified within a blob.Hence,the system is resistant towards illumination variations.These illumination variation was interpreted in object tracking residing within a dynamic background.Devised approach certainly outperforms other object tracking methodologies like Group Target Tracking(GTT),Vi PER-GT,grabcut,snakes in terms of accuracy and average time.Proposed PGP-based pattern texture analysis is compared with Gamifying Video Object(GVO)approach and hence,it evidently outperforms in terms of precision,recall and F1 measure.
基金supported by the NSC under Grant No.NSC101-2221-E-259-032-MY3
文摘In this paper, a novel object tracking based on a particle filter and speeded up robust feature (SURF) is proposed, which uses both color and SURF features. The SURF feature makes the tracking result more robust. On the other hand, the particle selection can lead to save time. In addition, we also consider the matched particle applicable to calculating the SURF weight. Owing to the color, spatial, and SURF features being adopted, this method is more robust than the traditional color-based appearance model. Experimental results demonstrate the robustness and accurate tracking results with challenging sequences. Besides, the proposed method outperforms other methods during the intersection of similar color and object's partial occlusion.
基金Supported by the National Natural Science Foundation of China(61701029)
文摘Object tracking with abrupt motion is an important research topic and has attracted wide attention.To obtain accurate tracking results,an improved particle filter tracking algorithm based on sparse representation and nonlinear resampling is proposed in this paper. First,the sparse representation is used to compute particle weights by considering the fact that the weights are sparse when the object moves abruptly,so the potential object region can be predicted more precisely. Then,a nonlinear resampling process is proposed by utilizing the nonlinear sorting strategy,which can solve the problem of particle diversity impoverishment caused by traditional resampling methods. Experimental results based on videos containing objects with various abrupt motions have demonstrated the effectiveness of the proposed algorithm.
基金This project is supported by Program for New Century Excellent Talents in University, China(No.NCET-04-0545)National Defense Science Foundation of China(No.51416070104JW0404)
文摘In YCbCr colorspace, a method is proposed to reconstruct the background and extract moving objects based on the Gaussian model of chroma components. Background model is updated according to changes of chroma components. In order to eliminate the disturbance of shadow, a shadow detecting principle is proposed in YCbCr colorspace. A Kalman filter is introduced to estimate objects' positions in the image and then the pedestrian is tracked according to its information of shape. Experiments show that the background reconstruction and updating are successful, object extraction and shadow suppression are satisfactory, and real-time and reliable tracking is realized.
基金supported by the MSIT(Ministry of Science and ICT),Korea,under the ICAN(ICT Challenge and Advanced Network of HRD)program(IITP-2023-RS-2022-00156326)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation).
文摘Unmanned aerial vehicles(UAVs)can be used to monitor traffic in a variety of settings,including security,traffic surveillance,and traffic control.Numerous academics have been drawn to this topic because of the challenges and the large variety of applications.This paper proposes a new and efficient vehicle detection and tracking system that is based on road extraction and identifying objects on it.It is inspired by existing detection systems that comprise stationary data collectors such as induction loops and stationary cameras that have a limited field of view and are not mobile.The goal of this study is to develop a method that first extracts the region of interest(ROI),then finds and tracks the items of interest.The suggested system is divided into six stages.The photos from the obtained dataset are appropriately georeferenced to their actual locations in the first phase,after which they are all co-registered.The ROI,or road and its objects,are retrieved using the GrabCut method in the second phase.The third phase entails data preparation.The segmented images’noise is eliminated using Gaussian blur,after which the images are changed to grayscale and forwarded to the following stage for additional morphological procedures.The YOLOv3 algorithm is used in the fourth step to find any automobiles in the photos.Following that,the Kalman filter and centroid tracking are used to perform the tracking of the detected cars.The Lucas-Kanade method is then used to perform the trajectory analysis on the vehicles.The suggested model is put to the test and assessed using the Vehicle Aerial Imaging from Drone(VAID)dataset.For detection and tracking,the model was able to attain accuracy levels of 96.7%and 91.6%,respectively.