Modification of streamer-to-leader transition model based on radial thermal expansion in the sphere-plane gap discharge at high altitude

Historically,streamer-to-leader transition studies mainly focused on the rod-plane gap and low altitude analysis,with limited attention paid to the sphere-plane gap at high altitude analysis.In this work,sphere-plane gap discharge tests were carried out under the gap distance of 5 m at the Qinghai Ultra High Voltage(UHV)test base at an altitude of 2200 m.The experiments measured the physical parameters such as the discharge current,electric field intensity and instantaneous optical power.The duration of the dark period and the critical charge of streamer-toleader transition were obtained at high altitude.Based on radial thermal expansion of the streamer stem,we established a modified streamer-to-leader transition model of the sphere-plane gap discharge at high altitude,and calculated the stem temperature,stem radii and the duration of streamer-to-leader transition.Compared with the measured duration of sphere-plane electrode discharge at an altitude of 2200 m,the error rate of the modified model was 0.94%,while the classical model was 6.97%,demonstrating the effectiveness of the modified model.From the comparisons and analysis,several suggestions are proposed to improve the numerical model for further quantitative investigations of the leader inception.

A Numerical Research on a Compressibility-correlated Langtry＇s Transition Model for Double Wedge Boundary Layer Flows

A new compressibility correlation is introduced in the Langtry＇s local variable-based transition model to investigate the phe- nomenon on double wedge shock/boundary layer interactions. The cmnputational analysis compared with experimental data has been made to assess the influence of the wall temperature and the leading edge nose radius on a hypersonic double wedge boundary layer. It has been found that the laminar boundary layer separation occurs on the first ramp. Furthermore, the wall temperature and the leading edge nose radius have remarkable influence on the separation characteristics in the kink. Comparison of the calculated pressure coefficient distribution and the boundary layer profile with the experimental data shows that better results can be achieved when using the modified transition model.

Improvement of the SST γ-Re_(θt) transition model for flows along a curved hydrofoil

The transition in the boundary-layer flow affects the hydrodynamic performances of hydraulic machineries,as the key components in the ship propulsion system.The shear stress transfer(SST)γ-Re_(θt) transition model is an important prediction tool in the boundary layer simulation for hydrofoils.The present paper improves the prediction accuracy of the SST γ-Re_(θt) model for the boundary layers along a curved hydrofoil.The SST γ-Re_(θt) transition model for the flows along a curved hydrofoil is improved by introducing a correction to the transition onset Reynolds number Reθt.First,the transition onset locations for the flows along the hydrofoils of different curvatures are obtained by the large eddy simulation and by using the SST γ-Re_(θt) model.Then,the transition onset Reynolds numbers Reθt in the SST γ-Re_(θt) model is modified to ensure that the predicted boundary layer parameters are consistent with the large eddy simulation(LES)results.The correlation function between the curvature ratio and the modified transition onset Reynolds number is obtained and subsequently used as a correction function in the original SST γ-Re_(θt) model.Three test cases are used to evaluate the performance of the improved SST γ-Re_(θt) model.For the NACA0035 hydrofoil with a large curvature,the predicted results obtained by using the improved SST γ-Re_(θt) model are quite consistent with the experimental data,which indicates the advantages of the improved model in predicting the boundary layer transition along a hydrofoil.In the test cases of the NACA0016 hydrofoil with a mild curvature and the NACA66(mod)-312 hydrofoil,the prediction results of the improved model are in good agreement with the experimental results in terms of the wake region and the boundary layer parameters,which indicates that the improved SST γ-Re_(θt) model can serve as a powerful tool in the design and the optimization of hydraulic machineries such as the waterjet pumps or the naval propellers.

A three-equation transition model with mechanical considerations

A three-equation transition model based on the transition V-model is proposed for subsonic flows in this study. Considering the mechanical approximation of the generation process of the pre-transitional vorticities, the value of laminar Reynolds shear stress related to the mean shear deformation was calculated in the original transition V-model. Then a new transition model, named V-SA model, was proposed, which considered the phenomenological process of transition and presented great results for flows with and without pressure gradient. It is well-known that the baseline Shear Stress Transport(SST) turbulence model shows excellent performance of accuracy and robustness in plentiful flow cases, but it is important to predict boundary layer transition. The current model(V-SST) successfully couples the V-model to the SST turbulence model by introducing the effective turbulent viscosity and additional correction terms into the transport equations. A thorough evaluation of its ability to predict transition features is performed versus the well-documented flat plate of ERCOFTAC, including T3A and T3B without pressure gradient, T3L2 and T3L3 with semi-circular leading edge, the three-dimensional 6:1 prolate-spheroid under two angles of attack, and the NLR-7301 airfoil under different Mach numbers. Numerical results show that the current model has an attractive and superior performance in the simulation of boundary layer transition processes.

Conjugate heat transfer investigations of turbine vane based on transition models

The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw （AGS） and c-Re h transition models, a 3D conjugate heat transfer solver is developed, where the fluid domain is discretized by multi-block structured grids, and the solid domain is discretized by unstructured grids. At the unmatched fluid/solid interface, the shape function interpolation method is adopted to ensure the conservation of the interfacial heat flux. Then the shear stress transport （SST） model, SST ＆ AGS model and SST ＆ c-Re h model are used to investigate the flow and heat transfer characteristics of Mark II turbine vane. The results indicate that compared with the full turbulence model （SST model）, the transition models could improve the prediction accuracy of temperature and heat transfer coefficient at the laminar zone near the blade leading edge. Compared with the AGS transition model, the c-Re h model could predict the transition onset location induced by shock/boundary layer interaction more accurately, and the prediction accuracy of temperature field could be greatly improved.

Extension of the KDO turbulence/transition model to account for roughness

Wall roughness significantly influences both laminar-turbulent transition process and fully developed turbulence.A wall roughness extension for the KDO turbulence/transition model is developed.The roughness effect is introduced via the modification of the k andνt boundary conditions.The wall is considered to be lifted to a higher position.The difference between the original position and the higher position,named as equivalent roughness height,is linked to the actual roughness height.The ratio between the two heights is determined by reasoning.With such a roughness extension,the predictions of the KDO RANS model agree well with the measurements of turbulent boundary layer with a sand grain surface,while the KDO transition model yields accurate cross-flow transition predictions of flow past a 6:1 spheroid.

Development of the Transitional Care Model for nursing care in China's Mainland:A literature review

Background:The Transitional Care Model(TCM)for nursing care has yet to be implemented in China despite its success in Western countries.However,rapid social changes have demanded an upgrade in the quality of nursing care;in 2010,the Chinese government has acknowledged the need to implement the TCM in China.Objective:This study has the following objectives:(1)perform a thorough review of the literature regarding the development and implementation of the TCM in China's Mainland within the past 5 years;(2)provide a comprehensive discussion of the current status,problems,and strategies related to the implementation of the TCM in China's Mainland;and(3)suggest strategies pertaining to the future of the TCM in China.Design:The current pertinent literature is systematically reviewed.Data sources:Systematic and manual searches in computerized databases for relevant studies regarding the TCM led to the inclusion of 26 papers in this review.Review methods:Abstracts that satisfied the inclusion criteria were reviewed independently by the two authors of this manuscript,and discrepancies were resolved through discussion.The same reviewers independently assessed the paper in its entirety for selected abstracts.Results:The present English literature reviewrevealed a paucity of updated information about the development and implementation of the TCM in China's Mainland.Nevertheless,the dramatic growth of the TCM in the past 5 years has had a vital impact within the society and in nursing development.This review also revealed numerous issues regarding the focus of the TCM.Overall implications for practiceandrecommendations for future researchare discussed.Conclusion:Despite the potential of this nursing model to have a successful and beneficial impact in China's Mainland,it remains an under-researched topic.Further research on education and training as well as premium policies for nurses under the TCM are needed.

Phase Transitions of Majority-Vote Model on Modular Networks

We investigate the phase transitions behavior of the majority-vote model with noise on a topology that consists of two coupled random networks. A parameter p is used to measure the degree of modularity, defined as the ratio of intermodular to intramodular connectivity. For the networks of strong modularity （small p）, as the level of noise f increases, the system undergoes successively two transitions at two distinct critical noises, fc1 and fc2. The first transition is a discontinuous jump from a coexistence state of parallel and antiparallel order to a state that only parallel order survives, and the second one is continuous that separates the ordered state from a disordered state. As the network modularity worsens, fc1 becomes smaller and fc1 does not change, such that the antiparallel ordered state will vanish if p is larger than a critical value of pc. We propose a mean-field theory to explain the simulation results.

Deconfinement Phase Transition with External Magnetic Field in the Friedberg-Lee Model

The deconfinement phase transition with external magnetic field is investigated in the Friedberg-Lee model. We expand the potentiM around the two locM minima of the first-order deconfinement phase transition and extract the ground state of the system in the frame of functional renormalization group. By solving the flow equations we find that the magnetic field displays a catalysis effect and it becomes more difficult to break through the confinement.

Four Types of Percolation Transitions in the Cluster Aggregation Network Model

We study the percolation transition in a one-species cluster aggregation network model, in which the parameter α describes the suppression on the cluster sizes. It is found that the model can exhibit four types of percolation transitions, two continuous percolation transitions and two discontinuous ones. Continuous and discontinuous percolation transitions can be distinguished from each other by the largest single jump. Two types of continuous percolation transitions show different behaviors in the time gap. Two types of discontinuous percolation transitions are different in the time evolution of the cluster size distribution. Moreover, we also find that the time gap may also be a measure to distinguish different discontinuous percolations in this model.

Critical Behavior of the Energy Gap and Its Relation with the Berry Phase Close to the Excited State Quantum Phase Transition in the Lipkin Model

In our previous work [Phys. Rev. A 85 （2012） 044102], we studied the Berry phase of the ground state and exited states in the Lipkin model. In this work, using the Hellmann-Feynman theorem, we derive the relation between the energy gap and the Berry phase closed to the excited state quantum phase transition （ESQPT） in the Lipkin model. It is found that the energy gap is approximately linearly dependent on the Berry phase being closed to the ESQPT for large N. As a result, the critical behavior of the energy gap is similar to that of the Berry phase. In addition, we also perform a semiclassical qualitative analysis about the critical behavior of the energy gap.

Transition Logic Regression Method to Identify Interactions in Binary Longitudinal Data

Logic regression is an adaptive regression method which searches for Boolean (logic) combinations of binary variables that best explain the variability in the outcome, and thus, it reveals interaction effects which are associated with the response. In this study, we extended logic regression to longitudinal data with binary response and proposed “Transition Logic Regression Method” to find interactions related to response. In this method, interaction effects over time were found by Annealing Algorithm with AIC (Akaike Information Criterion) as the score function of the model. Also, first and second orders Markov dependence were allowed to capture the correlation among successive observations of the same individual in longitudinal binary response. Performance of the method was evaluated with simulation study in various conditions. Proposed method was used to find interactions of SNPs and other risk factors related to low HDL over time in data of 329 participants of longitudinal TLGS study.

STRESS-STRAIN HYSTERESIS OF POLYCRYSTALLINE SMAs─Ⅰ:A MODEL

In this paper, a theoretical model was presented to simulate the stress-strain hysteresis and the inner hysteretic behaviors, which were observed for polycrystalline Ni-Ti and Cu-based shape memory alloys (SMAs) at various temperatures. It was assumed that the stress-strum hysteresis of the grains of a polycrystalline sample of SMAs was relatively simple and easy to be calculated. The texture of the sample was characterized by a distribution function, which could be obtained from the experiments. Thercfore,the model provided a means to simulate and, for the first time, to predict the stressstrain hysteresis at different loading temperatures for polycrystalline SMAs.

A phenomenological memristor model for synaptic memory and learning behaviors

Properties that are similar to the memory and learning functions in biological systems have been observed and reported in the experimental studies of memristors fabricated by different materials. These properties include the forgetting effect, the transition from short-term memory（STM） to long-term memory（LTM）, learning-experience behavior, etc. The mathematical model of this kind of memristor would be very important for its theoretical analysis and application design.In our analysis of the existing memristor model with these properties, we find that some behaviors of the model are inconsistent with the reported experimental observations. A phenomenological memristor model is proposed for this kind of memristor. The model design is based on the forgetting effect and STM-to-LTM transition since these behaviors are two typical properties of these memristors. Further analyses of this model show that this model can also be used directly or modified to describe other experimentally observed behaviors. Simulations show that the proposed model can give a better description of the reported memory and learning behaviors of this kind of memristor than the existing model.

Quantification of parametric uncertainty in c-Reh model for typical flat plate and airfoil transitional flows

Owing to the lack of physical knowledge of boundary layer transition,the c-Reh transi-tion model introduces closure parameters,which increase the uncertainty of transition prediction.The objective of this work is to quantify the uncertainties of closure parameters in the quantities of interests and identify the key parameters.The six closure parameters in the uncertainty intervals are used as input variables,and the uncertainties of the output results are propagated by a stochas-tic expansion based on the point-collocation nonintrusive polynomial chaos method.The relative contribution of each parameter to uncertainty is evaluated by the Sobol index.The computational cases include natural and bypass transitional flows on zero-pressure-gradient flat plates,and sub-sonic and transonic flows around airfoils.For most cases,c_(e2),c_(a2),and c_(a1)dominate the uncertainty,and the influence of r ht is also significant when the history effects of flow are evident.The contri-bution of parameters in airfoils is more complex than that in flat plates.The transonic airfoil case shows that flow separation dramatically changes the distribution of Sobol indices,which poses a challenge to the accurate prediction of transition.Generally,c_(e2)and c_(a2)are the key parameters of the c-Reh model.

在斜向非定常流动中由层流向湍流转变对模型尺度螺旋桨性能和压力脉动的影响

In this paper,after the successful applications to open water propeller performance estimations,the influence of transition sensitive and modified mass transfer models tuned to account for the laminar flow in the prediction of the cavitation inception of marine propulsors is investigated from the point of view of the unsteady functioning and induced pressure pulses.The VP1304(also known as PPTC)test case,for which dedicated data were collected during several workshops,is considered first.After preliminary analyses using RANS,also Detached Eddy Simulations(DES)are included to better account for the vortex dynamics and its influence on pressure pulses.Similarly to what observed in uniform inflow,results show a better agreement with the available measurements of propeller performances and confirm the reliability of the proposed approaches for unsteady,non-cavitating,model scale propeller predictions.The overall cavitation pattern is improved too by the application of the transition sensitive correction to the mass transfer model,but the complex dynamics of bubble cavitation observed in experiments prevents quantitatively better predictions in terms of thrust/torque breakdown and induced pressure pulses levels regardless the use of RANS or DES methods.

Passengers gathering-scattering analysis at the corners of subway stations

During both daily operation and emergency evacuation,the corners of walking facilities in subway stations play an important role in efficient circulation.However,the effectiveness of the corner is difficult to assess.In this paper,a method of passenger gathering and scattering analysis based on queueing models was proposed to investigate the corner performance in subway stations.Firstly,we constructed a set of state spaces of passenger flow according to passenger density and proposed the state transition model of passenger flow.Moreover,the model of passenger flow blocking and unblocking probability were also presented.Then,to illustrate the validity of the method and model,several passenger gathering-scattering scenarios and were simulated to verify the influence of passenger distribution and facility width on passenger walking,and the blocking probability,throughput,and expected time were also analyzed under various widths of the target corridor and arrival rates.Results showed that the proposed model can reproduce the trend of walking parameters changing and the self-organizing phenomenon of'faster is lower'.With the increase of arrival rates of passengers,walking speeds of passengers decrease and the expected walking time is prolonged,and the blocking probability sharply increased when the arrival rate exceeded 7 peds/s.In addition,with change of width of the target facility,efficiency of capacity of walking circulation facility fluctuated.With the width of the target corridor enlarged by 10%,the steady state of passenger flow was less crowded.Therefore,corridor width is critical to the circulation efficiency of passengers in subway stations.The conclusions will help to develop reasonable passenger flow control plans to ease the jam and keep passengers walking safely.

Boundary-layer transition prediction using a simplified correlation-based model

This paper describes a simplified transition model based on the recently developed correlation-based γ - Reot transition model. The transport equation of transition momentum thick- ness Reynolds number is eliminated for simplicity, and new transition length function and critical Reynolds number correlation are proposed. The new model is implemented into an in-house com- putational fluid dynamics （CFD） code and validated for low and high-speed flow cases, including the zero pressure flat plate, airfoils, hypersonic flat plate and double wedge. Comparisons between the simulation results and experimental data show that the boundary-layer transition phenomena can be reasonably illustrated by the new model, which gives rise to significant improvements over the fully laminar and fully turbulent results. Moreover, the new model has comparable features of accuracy and applicability when compared with the original 3＇ - Reot model. In the meantime, the newly proposed model takes only one transport equation of intermittency factor and requires fewer correlations, which simplifies the original model greatly. Further studies, especially on separation- induced transition flows, are required for the improvement of the new model.

Robust design of natural laminar flow supercritical airfoil by multi-objective evolution method

Abstract A transonic, high Reynolds number natural laminar flow airfoil is designed and studied. The γ-θ transition model is combined with the shear stress transport （SST） k-w turbulence model to predict the transition region for a laminar-turbulent boundary layer. The non-uniform free-form deformation （NFFD） method based on the non-uniform rational B-spline （NURBS） basis function is introduced to the airfoil parameterization. The non-dominated sorting genetic algorithm-II （NSGA-II） is used as the search algo- rithm, and the surrogate model based on the Kriging models is introduced to improve the efficiency of the optimization system. The optimization system is set up based on the above technologies, and the robust design about the uncertainty of the Mach number is carried out for NASA0412 airfoil. The optimized airfoil is analyzed and compared with the original airfoil. The results show that natural laminar flow can be achieved on a supercritical airfoil to improve the aerodynamic characteristic of airfoils.