Propagation of plane waves in thermoelastic cubic crystal material with two relaxation times

A problem concerned with the reflection and refraction of thermoelastic plane waves at an imperfect interface between two generalized thermally conducting cubic crystal solid half-spaces of different elastic and thermal properties with two relaxation times has been investigated. The generalized thermoelastic theory with two relaxation times developed by Green and Lindsay has been used to study the problem. The expressions for the reflection and refraction coefficients which are the ratios of the amplitudes of reflected and refracted waves to the amplitude of incident waves are obtained for an imperfect boundary and deduced for normal stiffness, transverse stiffness, thermal contact conductance, slip and welded boundaries. Amplitude ratios of different reflected and refracted waves for different boundaries with angle of emergence have been compared graphically for different incident waves. It is observed that the amplitude ratios of reflected and refracted waves are affected by the stiffness and thermal properties of the media.

Propagation of plane waves at the imperfect boundary of elastic and electro-microstretch generalized thermoelastic solids

The problem of reflection and transmission of plane waves incident on the contact surface of an elastic solid and an electro-microstretch generalized thermoelastic solid is discussed. It is found that there exist five reflected waves, i.e., longitudinal displacement （LD） wave, thermal （T） wave, longitudinal microstretch （LM） wave and two coupled transverse displacement and microrotational （CD（I） and CD（II）） waves in the electro-microstretch generalized thermoelastic solid, and two transmitted waves, i.e., longitudinal （P） and transverse （SV） waves in the elastic solid. The amplitude ratios of different reflected and transmitted waves are obtained for an imperfect boundary and deduced for normal force stiffness, transverse force stiffness, and perfect bonding. The variations of amplitude ratios with incidence angles have been depicted graphically for the LD wave and the CD（I） wave. It is noticed that the amplitude ratios of reflected and transmitted waves are affected by the stiffness, electric field, stretch, and thermal properties of the media. Some particular interest cases have been deduced from the present investigations.

Elastically restrained Bernoulli-Euler beams applied to rotary machinery modelling

Facing the lateral vibration problem of a machine rotor as a beam on elastic supports in bending,the authors deal with the free vibration of elastically restrained Bernoulli-Euler beams carrying a finite number of concentrated elements along their length.Based on Rayleigh’s quotient,an iterative strategy is developed to find the approximated torsional stiffness coefficients,which allows the reconciliation between the theoretical model results and the experimental ones,obtained through impact tests.The mentioned algorithm treats the vibration of continuous beams under a determined set of boundary and continuity conditions, including different torsional stiffness coefficients and the effect of attached concentrated masses and rotational inertias, not only in the energetic terms of the Rayleigh’s quotient but also on the mode shapes,considering the shape functions defined in branches.Several loading cases are examined and examples are given to illustrate the validity of the model and accuracy of the obtained natural frequencies.

Analytical and numerical analysis on the torsional performance of elliptically deformed tunnels in the longitudinal direction

Segmental lining structures constructed by shields/tunnel boring machines are often subjected to uneven longitudinal cross-section torsion as a result of eccentric external loads,which is extremely adverse to tunnel safety but has not received sufficient attention for a long time.To figure out the torsional performance of segmental tunnels,it is essential to assess the longitudinal torsional stiffness and active-torsion-rejection capability of a segmented tunnel.The aim of the paper is to derive an analytical solution to the longitudinal torsional stiffness of a segmental tunnel with existing elliptical deformation.The longitudinal torsional stiffness under different internal force combinations is deduced considering the longitudinal axial force and bending moment based on the equivalent continuous model and force balance equation.The validity of the analytical solution is verified by comparing it with finite element method results.Then,a parametric analysis,using the new analytical solution,is included to investigate the effect of the key parameters on torsional behaviors,including the segment size,the bolt size and the transverse bending stiffness,etc.It is found that:(1)the longitudinal torsional stiffness efficiency(LTSE)of the segmental tunnel decreases with the rise of segment thickness to diameter ratio but increases with the ring width to diameter ratio;(2)the LTSE reduces with the increase of the effective shear length but rises with the diameter of bolts;(3)the LTSE increases rapidly with the ratio of compression-torsion or bending-torsion.Furthermore,the envelope curve of the critical load(N0,M0)for a tunnel to actively resist a certain internal torque is given.The proposed solution can be easily utilized to determine the longitudinal torsional stiffness of segmental tunnels and is an effective tool for tunnel design and maintenance.