Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well descri...Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well described by layered models or cells. The geological body is described as an aggregate of arbitrarily shaped blocks,which are separated by triangulated interfaces. We can describe the media as homogenous or heterogeneous in each block. We define the velocities at the given rectangle grid points for each block,and the heterogeneous velocities in each block can be calculated by a linear interpolation algorithm. The parameters of the velocity grid positions are independent of the model parameterization,which is advantageous in the joint inversion of the velocities and the node depths of an interface. We implement a segmentally iterative ray tracer to calculate traveltimes in the 3D heterogeneous block models.The damped least squares method is employed in seismic traveltime inversion,which includes the partial derivatives of traveltime with respect to the depths of nodes in the triangulated interfaces and velocities defined in rectangular grids. The numerical tests indicate that the node depths of a triangulated interface and homogeneous velocity distributions can be well inverted in a stratified model.展开更多
2-D velocity structure and tectonics of the crust and upper mantle is revealed by inversion of seismic refraction and wide-angle reflection traveltimes acquired along the profile L1 in the Changbaishan-Tianchi volcani...2-D velocity structure and tectonics of the crust and upper mantle is revealed by inversion of seismic refraction and wide-angle reflection traveltimes acquired along the profile L1 in the Changbaishan-Tianchi volcanic region. It is used in this study that seismic traveltime inversion for simultaneous determination of 2-D velocity and interface structure of the crust and upper mantle. The result shows that, under Changbaishan-Tianchi crater, there exists a low-velocity body in the shape of an inverted triangle, and the crustal reflecting boundaries and Moho all become lower by a varying margin of 2-6 km, forming a crustal root which is assumed to be the Changbaishan-Tianchi volcanic system. Finally, we make a comparison between our 2-D velocity model and the result from the studies by using trial-and-error forward modeling with SEIS83.展开更多
A new source location method using wave-equation based traveltime inversion is proposed to locate microseismic events accurately. With a sourceindependent strategy, microseismic events can be located independently reg...A new source location method using wave-equation based traveltime inversion is proposed to locate microseismic events accurately. With a sourceindependent strategy, microseismic events can be located independently regardless of the accuracy of the source signature and the origin time. The traveltime-residuals-based misfit function has robust performance when the velocity model is inaccurate. The new Fréchet derivatives of the misfit function with respect to source location are derived directly based on the acoustic wave equation, accounting for the influence of geometrical perturbation and spatial velocity variation. Unlike the mostly used traveltime inversion methods, no traveltime picking or ray tracing is needed.Additionally, the improved scattering-integral method is applied to reduce the computational cost. Numerical tests show the validity of the proposed method.展开更多
Reflection-based inversion that aims to reconstruct the low-to-intermediate wavenumbers of the subsurface model, can be a complementary to refraction-data-driven full-waveform inversion(FWI), especially for the deep t...Reflection-based inversion that aims to reconstruct the low-to-intermediate wavenumbers of the subsurface model, can be a complementary to refraction-data-driven full-waveform inversion(FWI), especially for the deep target area where diving waves cannot be acquired at the surface. Nevertheless, as a typical nonlinear inverse problem, reflection waveform inversion may easily suffer from the cycleskipping issue and have a slow convergence rate, if gradient-based first-order optimization methods are used. To improve the accuracy and convergence rate, we introduce the Hessian operator into reflection traveltime inversion(RTI) and reflection waveform inversion(RWI) in the framework of second-order optimization. A practical two-stage workflow is proposed to build the velocity model, in which Gauss-Newton RTI is first applied to mitigate the cycle-skipping problem and then Gauss-Newton RWI is employed to enhance the model resolution. To make the Gauss-Newton iterations more efficiently and robustly for large-scale applications, we introduce proper preconditioning for the Hessian matrix and design appropriate strategies to reduce the computational costs. The example of a real dataset from East China Sea demonstrates that the cascaded Hessian-based RTI and RWI have good potential to improve velocity model building and seismic imaging, especially for the deep targets.展开更多
基金supported financially by the Ministry of Science and Technology of China(2011CB808904)the National Natural Science Foundation of China(Nos.41021063,41174075,41004034,41174043,and 41274090)
文摘Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well described by layered models or cells. The geological body is described as an aggregate of arbitrarily shaped blocks,which are separated by triangulated interfaces. We can describe the media as homogenous or heterogeneous in each block. We define the velocities at the given rectangle grid points for each block,and the heterogeneous velocities in each block can be calculated by a linear interpolation algorithm. The parameters of the velocity grid positions are independent of the model parameterization,which is advantageous in the joint inversion of the velocities and the node depths of an interface. We implement a segmentally iterative ray tracer to calculate traveltimes in the 3D heterogeneous block models.The damped least squares method is employed in seismic traveltime inversion,which includes the partial derivatives of traveltime with respect to the depths of nodes in the triangulated interfaces and velocities defined in rectangular grids. The numerical tests indicate that the node depths of a triangulated interface and homogeneous velocity distributions can be well inverted in a stratified model.
基金Key Project (95-11-02-01) from China Seismological Bureau.Contribution No. RCEG200129, Research Center of Exploration Geophysi
文摘2-D velocity structure and tectonics of the crust and upper mantle is revealed by inversion of seismic refraction and wide-angle reflection traveltimes acquired along the profile L1 in the Changbaishan-Tianchi volcanic region. It is used in this study that seismic traveltime inversion for simultaneous determination of 2-D velocity and interface structure of the crust and upper mantle. The result shows that, under Changbaishan-Tianchi crater, there exists a low-velocity body in the shape of an inverted triangle, and the crustal reflecting boundaries and Moho all become lower by a varying margin of 2-6 km, forming a crustal root which is assumed to be the Changbaishan-Tianchi volcanic system. Finally, we make a comparison between our 2-D velocity model and the result from the studies by using trial-and-error forward modeling with SEIS83.
文摘A new source location method using wave-equation based traveltime inversion is proposed to locate microseismic events accurately. With a sourceindependent strategy, microseismic events can be located independently regardless of the accuracy of the source signature and the origin time. The traveltime-residuals-based misfit function has robust performance when the velocity model is inaccurate. The new Fréchet derivatives of the misfit function with respect to source location are derived directly based on the acoustic wave equation, accounting for the influence of geometrical perturbation and spatial velocity variation. Unlike the mostly used traveltime inversion methods, no traveltime picking or ray tracing is needed.Additionally, the improved scattering-integral method is applied to reduce the computational cost. Numerical tests show the validity of the proposed method.
基金supported by National Natural Science Foundation of China (42074157)the National Key Research and Development Program of China (2018YFC0310104)the Strategic Priority Research Program of the Chinese Academy of Science(XDA14010203)。
文摘Reflection-based inversion that aims to reconstruct the low-to-intermediate wavenumbers of the subsurface model, can be a complementary to refraction-data-driven full-waveform inversion(FWI), especially for the deep target area where diving waves cannot be acquired at the surface. Nevertheless, as a typical nonlinear inverse problem, reflection waveform inversion may easily suffer from the cycleskipping issue and have a slow convergence rate, if gradient-based first-order optimization methods are used. To improve the accuracy and convergence rate, we introduce the Hessian operator into reflection traveltime inversion(RTI) and reflection waveform inversion(RWI) in the framework of second-order optimization. A practical two-stage workflow is proposed to build the velocity model, in which Gauss-Newton RTI is first applied to mitigate the cycle-skipping problem and then Gauss-Newton RWI is employed to enhance the model resolution. To make the Gauss-Newton iterations more efficiently and robustly for large-scale applications, we introduce proper preconditioning for the Hessian matrix and design appropriate strategies to reduce the computational costs. The example of a real dataset from East China Sea demonstrates that the cascaded Hessian-based RTI and RWI have good potential to improve velocity model building and seismic imaging, especially for the deep targets.