Accurate measurement of the transverse position of a beam is crucial in particle accelerators because it plays a key role in determining the beam parameters.Existing methods for beam-position measurement rely on the d...Accurate measurement of the transverse position of a beam is crucial in particle accelerators because it plays a key role in determining the beam parameters.Existing methods for beam-position measurement rely on the detection of image currents induced on electrodes or narrow-band wake field induced by a beam passing through a cavity-type structure.However,these methods have limitations.The indirect measurement of multiple parameters is computationally complex,requiring external calibration to determine the system parameters in advance.Furthermore,the utilization of the beam signal information is incomplete.Hence,this study proposes a novel method for measuring the absolute electron beam transverse position.By utilizing the geometric relationship between the center position of the measured electron beam and multiple detection electrodes and by analyzing the differences in the arrival times of the beam signals detected by these electrodes,the absolute transverse position of the electron beam crossing the electrode plane can be calculated.This method features absolute position measurement,a position sensitivity coefficient independent of vacuum chamber apertures,and no requirement for a symmetrical detector electrode layout.The feasibility of this method is validated through numerical simulations and beam experiments.展开更多
A total of 153 soil samples were collected from Changsha City, China, to analyze the contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb and Zn. A combination of sampling data, multivariate statistical method, geostatistical a...A total of 153 soil samples were collected from Changsha City, China, to analyze the contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb and Zn. A combination of sampling data, multivariate statistical method, geostatistical analysis, direct exposure method and triangulated irregular network （TIN） model was successfully employed to discriminate sources, simulate spatial distributions and evaluate children＇s health risks of heavy metals in soils. The results show that not all sites in Changsha city may be suitable for living without remediation. About 9.0% of the study area provided a hazard index （HI）1.0, and 1.9% had an HI2.0. Most high HIs were located in the southern and western areas. The element of arsenic and the pathway of soil ingestion were the largest contribution to potential health risks for children. This study indicates that we should attach great importance to the direct soil heavy metals exposure for children＇s health.展开更多
To alleviate the distortion of XRII X-ray image intensifier images in the C-arm CT computer tomography imaging system an algorithm based on the Delaunay triangulation interpolation is proposed.First the causes of the ...To alleviate the distortion of XRII X-ray image intensifier images in the C-arm CT computer tomography imaging system an algorithm based on the Delaunay triangulation interpolation is proposed.First the causes of the phenomenon the classical correction algorithms and the Delaunay triangulation interpolation are analyzed.Then the algorithm procedure is explained using flow charts and illustrations. Finally experiments are described to demonstrate its effectiveness and feasibility. Experimental results demonstrate that the Delaunay triangulation interpolation can have the following effects.In the case of the same center the root mean square distances RMSD and standard deviation STD between the corrected image with Delaunay triangulation interpolation and the ideal image are 5.760 4 ×10 -14 and 5.354 2 ×10 -14 respectively.They increase to 1.790 3 2.388 8 2.338 8 and 1.262 0 1.268 1 1.202 6 after applying the quartic polynomial model L1 and model L2 to the distorted images respectively.The RMSDs and STDs between the corrected image with the Delaunay triangulation interpolation and the ideal image are 2.489 × 10 -13 and 2.449 8 ×10 -13 when their centers do not coincide. When the quartic polynomial model L1 and model L2 are applied to the distorted images they are 1.770 3 2.388 8 2.338 8 and 1.269 9 1.268 1 1.202 6 respectively.展开更多
This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generat...This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generate optimal triangulation; the other is coupling the classic paving and Delaunay triangulation for optimal quadrilateral meshing. Various electric machine models are meshed successfully to demonstrate the robustness and effectiveness of the methods.展开更多
A non contact three dimensional measurement method is presented in this paper.This system consists of a laser triangulation probe,a probe head and a coordinate measuring machine (CMM).The measurement principle of th...A non contact three dimensional measurement method is presented in this paper.This system consists of a laser triangulation probe,a probe head and a coordinate measuring machine (CMM).The measurement principle of the system is discussed,and a system calibration method employing a reference ball is proposed.The geometric model involving four frames is established to calculate the data points based on the reading of the laser probe and position information from the CMM.A measuring experiment for gesso free form surface using this system is carried out.展开更多
According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are prese...According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.展开更多
Boundary recovery is one of the main obstacles in applying the Delaunay criterion to mesh generation. A stan- dard resolution is to add Steiner points directly at the intersection positions between missing boundaries ...Boundary recovery is one of the main obstacles in applying the Delaunay criterion to mesh generation. A stan- dard resolution is to add Steiner points directly at the intersection positions between missing boundaries and triangulations. We redesign the algorithm with the aid of some new concepts, data structures and operations, which make its implementation routine. Furthermore, all possible intersection cases and their solutions are presented, some of which are seldom discussed in the litera- ture. Finally, numerical results are presented to evaluate the performance of the new algorithm.展开更多
The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrai...The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.展开更多
A method for measuring the sculptured surface of rotation by using coordinatemeasuring machine (CMM) and rotary table is proposed. The measurement is realized during thecontinuous rotation of the workpiece mounted on ...A method for measuring the sculptured surface of rotation by using coordinatemeasuring machine (CMM) and rotary table is proposed. The measurement is realized during thecontinuous rotation of the workpiece mounted on the rotary table while the probe moves along thegeneratrix of the surface step by step. This method possesses lots of advantages such as simplicityof probe motion, high reliability and efficiency. Some key techniques including calibration of theeffective radius of the probing system, determination of the position of axis of rotation,auto-centering of the workpiece, data processing algorithm, are discussed. Approaches fordetermining the coordinates on measured surface, establishing workpiece coordinate system andsurface fitting are presented in detail. The method can be used with contact or non-contact probes.Some fragile ceramic and plaster parts are measured by using the system consisting of a CMM, rotarytable, motorized head and non-contact laser triangulation probe. The measuring uncertainty is about0.02 mm which meets the general requirement in most cases.展开更多
The paper presents the utilization of the adaptive Delaunay triangulation in the finite element modeling of two dimensional crack propagation problems, including detailed description of the proposed procedure which co...The paper presents the utilization of the adaptive Delaunay triangulation in the finite element modeling of two dimensional crack propagation problems, including detailed description of the proposed procedure which consists of the Delaunay triangulation algorithm and an adaptive remeshing technique. The adaptive remeshing technique generates small elements around crack tips and large elements in the other regions. The resulting stress intensity factors and simulated crack propagation behavior are used to evaluate the effectiveness of the procedure. Three sample problems of a center cracked plate, a single edge cracked plate and a compact tension specimen, are simulated and their results assessed.展开更多
This paper presents a method to generate unstructured adaptive meshes with moving boundaries and its application to CFD. Delaunay triangulation criterion in conjunction with the automatic point creation is used to gen...This paper presents a method to generate unstructured adaptive meshes with moving boundaries and its application to CFD. Delaunay triangulation criterion in conjunction with the automatic point creation is used to generate 2 D and 3 D unstructured grids. A local grid regeneration method is proposed to cope with moving boundaries. Numerical examples include the interactions of shock waves with movable bodies and the movement of a projectile within a ram accelerator, illustrating an efficient and robust mesh generation method developed.展开更多
A new deghosting method based on the generalized triangulation is presented. First, two intersection points corresponding to the emitter position are obtained by utilizing two azimuth angles and two elevation angles f...A new deghosting method based on the generalized triangulation is presented. First, two intersection points corresponding to the emitter position are obtained by utilizing two azimuth angles and two elevation angles from two jammed 3-D radars （or 2-D passive sensors）. Then, hypothesis testing based deghosting method in the multiple target scenarios is proposed using the two intersection points. In order to analyze the performance of the proposed method, the correct association probability of the true targets and the incorrect association probability of the ghost targets are defined. Finally, the Monte Carlo simulations are given for the proposed method compared with the hinge angle method in the cases of both two and three radars. The simulation results show that the proposed method has better performance than the hinge angle method in three radars case.展开更多
Objective To identify the representative attributes of the five elements of a person with a qualitative methodology and provide the basis for the clinical diagnosis and treatment of“people with the five elements in t...Objective To identify the representative attributes of the five elements of a person with a qualitative methodology and provide the basis for the clinical diagnosis and treatment of“people with the five elements in traditional Chinese medicine(TCM).”Methods Data collected from the literature review,two sessions of brainstorming of experts with related experience in“people with the five elements in TCM”from October 2020 to December 2020,and six rounds of in-depth interviews with 30 participants who had various attributes of the five elements from March 2021 to October 2021 were analyzed.Triangulation was used in this study,and theming and synthesizing were used to analyze the data.Results A total of 31 experts and 30 interviewees participated in this study.The median age of the experts and interviewees were 48.0 and 38.5 years,respectively;51.66%and 54.8%of experts and interviewees,respectively,were men.The descriptors of facial diagrams of“people with the five elements in TCM”were complexion,shape,distribution state of facial bones,convergence trend of facial muscles,and facial expression.A theoretical model of“people with the five elements in TCM”was shaped based on these findings.Conclusion The study suggests a possibility for bridging the gap between personality and bodily state,identifying an avenue for personality research from the perspective of TCM.展开更多
基金supported by the National Key R&D Program of China(No.2022YFA1602201)。
文摘Accurate measurement of the transverse position of a beam is crucial in particle accelerators because it plays a key role in determining the beam parameters.Existing methods for beam-position measurement rely on the detection of image currents induced on electrodes or narrow-band wake field induced by a beam passing through a cavity-type structure.However,these methods have limitations.The indirect measurement of multiple parameters is computationally complex,requiring external calibration to determine the system parameters in advance.Furthermore,the utilization of the beam signal information is incomplete.Hence,this study proposes a novel method for measuring the absolute electron beam transverse position.By utilizing the geometric relationship between the center position of the measured electron beam and multiple detection electrodes and by analyzing the differences in the arrival times of the beam signals detected by these electrodes,the absolute transverse position of the electron beam crossing the electrode plane can be calculated.This method features absolute position measurement,a position sensitivity coefficient independent of vacuum chamber apertures,and no requirement for a symmetrical detector electrode layout.The feasibility of this method is validated through numerical simulations and beam experiments.
基金Project (50925417) supported by the National Funds for Distinguished Young Scientists, ChinaProject (50830301) supported by the Key Project of National Natural Science Foundation of China
文摘A total of 153 soil samples were collected from Changsha City, China, to analyze the contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb and Zn. A combination of sampling data, multivariate statistical method, geostatistical analysis, direct exposure method and triangulated irregular network （TIN） model was successfully employed to discriminate sources, simulate spatial distributions and evaluate children＇s health risks of heavy metals in soils. The results show that not all sites in Changsha city may be suitable for living without remediation. About 9.0% of the study area provided a hazard index （HI）1.0, and 1.9% had an HI2.0. Most high HIs were located in the southern and western areas. The element of arsenic and the pathway of soil ingestion were the largest contribution to potential health risks for children. This study indicates that we should attach great importance to the direct soil heavy metals exposure for children＇s health.
基金The Natural Science Foundation of Anhui Province(No.1308085MF96)the Project of Chuzhou University(No.2012qd06,2011kj010B)+1 种基金the Scientific Research Foundation of Education Department of Anhui Province(No.KJ2014A186)the National Basic Research Program of China(973 Program)(No.2010CB732503)
文摘To alleviate the distortion of XRII X-ray image intensifier images in the C-arm CT computer tomography imaging system an algorithm based on the Delaunay triangulation interpolation is proposed.First the causes of the phenomenon the classical correction algorithms and the Delaunay triangulation interpolation are analyzed.Then the algorithm procedure is explained using flow charts and illustrations. Finally experiments are described to demonstrate its effectiveness and feasibility. Experimental results demonstrate that the Delaunay triangulation interpolation can have the following effects.In the case of the same center the root mean square distances RMSD and standard deviation STD between the corrected image with Delaunay triangulation interpolation and the ideal image are 5.760 4 ×10 -14 and 5.354 2 ×10 -14 respectively.They increase to 1.790 3 2.388 8 2.338 8 and 1.262 0 1.268 1 1.202 6 after applying the quartic polynomial model L1 and model L2 to the distorted images respectively.The RMSDs and STDs between the corrected image with the Delaunay triangulation interpolation and the ideal image are 2.489 × 10 -13 and 2.449 8 ×10 -13 when their centers do not coincide. When the quartic polynomial model L1 and model L2 are applied to the distorted images they are 1.770 3 2.388 8 2.338 8 and 1.269 9 1.268 1 1.202 6 respectively.
文摘This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generate optimal triangulation; the other is coupling the classic paving and Delaunay triangulation for optimal quadrilateral meshing. Various electric machine models are meshed successfully to demonstrate the robustness and effectiveness of the methods.
基金Supported by"863"High Technology Development Comittee ofChina (No."863"- 51 1 - 942 - 0 2 4 ) National Natural Science Foun-dation of China (No.50 0 750 64)
文摘A non contact three dimensional measurement method is presented in this paper.This system consists of a laser triangulation probe,a probe head and a coordinate measuring machine (CMM).The measurement principle of the system is discussed,and a system calibration method employing a reference ball is proposed.The geometric model involving four frames is established to calculate the data points based on the reading of the laser probe and position information from the CMM.A measuring experiment for gesso free form surface using this system is carried out.
文摘According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.
基金Project (No. 60225009) supported by the National Natural ScienceFoundation of China through the National Science Fund for Distin-guished Young Scholars
文摘Boundary recovery is one of the main obstacles in applying the Delaunay criterion to mesh generation. A stan- dard resolution is to add Steiner points directly at the intersection positions between missing boundaries and triangulations. We redesign the algorithm with the aid of some new concepts, data structures and operations, which make its implementation routine. Furthermore, all possible intersection cases and their solutions are presented, some of which are seldom discussed in the litera- ture. Finally, numerical results are presented to evaluate the performance of the new algorithm.
基金Supported by the National Natural Science Foundation of China （No.40671158）, the National 863 Program of China（No.2006AA12Z224） and the Program for New Century Excellent Talents in University （No.NCET-05-0626）.
文摘The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.
文摘A method for measuring the sculptured surface of rotation by using coordinatemeasuring machine (CMM) and rotary table is proposed. The measurement is realized during thecontinuous rotation of the workpiece mounted on the rotary table while the probe moves along thegeneratrix of the surface step by step. This method possesses lots of advantages such as simplicityof probe motion, high reliability and efficiency. Some key techniques including calibration of theeffective radius of the probing system, determination of the position of axis of rotation,auto-centering of the workpiece, data processing algorithm, are discussed. Approaches fordetermining the coordinates on measured surface, establishing workpiece coordinate system andsurface fitting are presented in detail. The method can be used with contact or non-contact probes.Some fragile ceramic and plaster parts are measured by using the system consisting of a CMM, rotarytable, motorized head and non-contact laser triangulation probe. The measuring uncertainty is about0.02 mm which meets the general requirement in most cases.
文摘The paper presents the utilization of the adaptive Delaunay triangulation in the finite element modeling of two dimensional crack propagation problems, including detailed description of the proposed procedure which consists of the Delaunay triangulation algorithm and an adaptive remeshing technique. The adaptive remeshing technique generates small elements around crack tips and large elements in the other regions. The resulting stress intensity factors and simulated crack propagation behavior are used to evaluate the effectiveness of the procedure. Three sample problems of a center cracked plate, a single edge cracked plate and a compact tension specimen, are simulated and their results assessed.
基金the Natural Science Foundation of China(No.5 99760 13 and1983 2 0 3 0 )
文摘This paper presents a method to generate unstructured adaptive meshes with moving boundaries and its application to CFD. Delaunay triangulation criterion in conjunction with the automatic point creation is used to generate 2 D and 3 D unstructured grids. A local grid regeneration method is proposed to cope with moving boundaries. Numerical examples include the interactions of shock waves with movable bodies and the movement of a projectile within a ram accelerator, illustrating an efficient and robust mesh generation method developed.
基金supported partly by the Foundation for the Author of National Excellent Doctoral Dissertation of China(200443)the National Natural Science Foundation of China(60541001)+1 种基金the Program for New Century Excellent Talents inUniversity(05-0912)the Foundation of Taishan Scholars.
文摘A new deghosting method based on the generalized triangulation is presented. First, two intersection points corresponding to the emitter position are obtained by utilizing two azimuth angles and two elevation angles from two jammed 3-D radars （or 2-D passive sensors）. Then, hypothesis testing based deghosting method in the multiple target scenarios is proposed using the two intersection points. In order to analyze the performance of the proposed method, the correct association probability of the true targets and the incorrect association probability of the ghost targets are defined. Finally, the Monte Carlo simulations are given for the proposed method compared with the hinge angle method in the cases of both two and three radars. The simulation results show that the proposed method has better performance than the hinge angle method in three radars case.
基金financially supported by the Beijing Hospital Management Center“Dengfeng”plan[DFL20191901]。
文摘Objective To identify the representative attributes of the five elements of a person with a qualitative methodology and provide the basis for the clinical diagnosis and treatment of“people with the five elements in traditional Chinese medicine(TCM).”Methods Data collected from the literature review,two sessions of brainstorming of experts with related experience in“people with the five elements in TCM”from October 2020 to December 2020,and six rounds of in-depth interviews with 30 participants who had various attributes of the five elements from March 2021 to October 2021 were analyzed.Triangulation was used in this study,and theming and synthesizing were used to analyze the data.Results A total of 31 experts and 30 interviewees participated in this study.The median age of the experts and interviewees were 48.0 and 38.5 years,respectively;51.66%and 54.8%of experts and interviewees,respectively,were men.The descriptors of facial diagrams of“people with the five elements in TCM”were complexion,shape,distribution state of facial bones,convergence trend of facial muscles,and facial expression.A theoretical model of“people with the five elements in TCM”was shaped based on these findings.Conclusion The study suggests a possibility for bridging the gap between personality and bodily state,identifying an avenue for personality research from the perspective of TCM.
