Cenospheres are produced in very large amount in thermal power plants. They are always looked upon as fillers used to reduce the density and cost of the polymer. If cenosphere particles are allowed to remain properly ...Cenospheres are produced in very large amount in thermal power plants. They are always looked upon as fillers used to reduce the density and cost of the polymer. If cenosphere particles are allowed to remain properly dispersed by taking it in lower concentration, significant improvement in its mechanical, thermal, electrical, crystallinity, colorimetric and morphological properties are expected. To make it happen, epoxy/cenosphere composites were prepared, having lower concentration of cenosphere. Concentration of cenosphere in epoxy, cured with triethylenetetramine, was changed as 0, 3, 5, 7 and 10. Tensile Strength, Tensile Modulus, Percentage Elongation at Break and Crystallinity decreased, whereas, Flexural Strength and Flexural Modulus were found to have increased by 50% and above 100% respectively at 7 phr loading of cenosphere in epoxy. Thermal and electrical stability also increased with increase in concentration of cenosphere in the epoxy, however, the samples became blackish with increased addition of cenosphere. Using SEM analysis it was found that, cenospheres were properly and uniformly dispersed at 7 phr concentration and formed aggregates at 10 phr concentration.展开更多
Objective:To investigate the detection and sequencing of plasmid encoded tetracycline resistance genes(tet A and tet B) from food-borne and standard strains of Bacillus cereus(B. cereus).Methods:PCR was carried out to...Objective:To investigate the detection and sequencing of plasmid encoded tetracycline resistance genes(tet A and tet B) from food-borne and standard strains of Bacillus cereus(B. cereus).Methods:PCR was carried out to detect the tetracycline resistance genes(tet A and tet B) in food-borne B.cereus strains and the amplified products were sequenced.Results:The phenotypic resistance against tetracycline was observed in 39 of the 118 food-borne isolates and two reference strains(MTCC 430 and MTCC 1307) of B.cereus.Among the phenotypically resistant isolates,tet A was detected in 36 food-borne isolates and two reference strains(MTCC 430 and MTCC 1307).whereas,tel B was detected in 12 food-bome isolates and MTCC 1307 strain. Conclusions:A close association was therefore found between phenotypic resistance against tetracycline and presence of tetracycline resistance genes.The tet A and tet B gene fragments were amplified,purified and sequenced.The gene sequences of the isolates studied herein were found similar to tetA and tetB gene sequences of other bacteria available in NCBI.The occurrence of tetA and tetB genes in B.cereus indicate the horizontal transfer of antibiotic resistance determinants from other bacteria into B.cereus.The transfer of these resistant determinants to other potentially pathogenic bacteria may be a matter of great concern.展开更多
文摘Cenospheres are produced in very large amount in thermal power plants. They are always looked upon as fillers used to reduce the density and cost of the polymer. If cenosphere particles are allowed to remain properly dispersed by taking it in lower concentration, significant improvement in its mechanical, thermal, electrical, crystallinity, colorimetric and morphological properties are expected. To make it happen, epoxy/cenosphere composites were prepared, having lower concentration of cenosphere. Concentration of cenosphere in epoxy, cured with triethylenetetramine, was changed as 0, 3, 5, 7 and 10. Tensile Strength, Tensile Modulus, Percentage Elongation at Break and Crystallinity decreased, whereas, Flexural Strength and Flexural Modulus were found to have increased by 50% and above 100% respectively at 7 phr loading of cenosphere in epoxy. Thermal and electrical stability also increased with increase in concentration of cenosphere in the epoxy, however, the samples became blackish with increased addition of cenosphere. Using SEM analysis it was found that, cenospheres were properly and uniformly dispersed at 7 phr concentration and formed aggregates at 10 phr concentration.
基金Head of Departments of Veterinary Public Health and Animal Biotechology of Guru Angad Dev Veterinary and Animal Sciences University,Ludhiana(India) for providing all the necessary facilities and funds to make this research successfulHead of Departments of Veterinary Public Health (SKUSAT-K) for providing the reference strain of B.cereus(NCTC11143)
文摘Objective:To investigate the detection and sequencing of plasmid encoded tetracycline resistance genes(tet A and tet B) from food-borne and standard strains of Bacillus cereus(B. cereus).Methods:PCR was carried out to detect the tetracycline resistance genes(tet A and tet B) in food-borne B.cereus strains and the amplified products were sequenced.Results:The phenotypic resistance against tetracycline was observed in 39 of the 118 food-borne isolates and two reference strains(MTCC 430 and MTCC 1307) of B.cereus.Among the phenotypically resistant isolates,tet A was detected in 36 food-borne isolates and two reference strains(MTCC 430 and MTCC 1307).whereas,tel B was detected in 12 food-bome isolates and MTCC 1307 strain. Conclusions:A close association was therefore found between phenotypic resistance against tetracycline and presence of tetracycline resistance genes.The tet A and tet B gene fragments were amplified,purified and sequenced.The gene sequences of the isolates studied herein were found similar to tetA and tetB gene sequences of other bacteria available in NCBI.The occurrence of tetA and tetB genes in B.cereus indicate the horizontal transfer of antibiotic resistance determinants from other bacteria into B.cereus.The transfer of these resistant determinants to other potentially pathogenic bacteria may be a matter of great concern.