The optimization of flow control devices(FCDs) for a T-type five-strand billet caster tundish was carried out by water modeling and numerical simulation. In water modeling experiments, flow characteristics of the bare...The optimization of flow control devices(FCDs) for a T-type five-strand billet caster tundish was carried out by water modeling and numerical simulation. In water modeling experiments, flow characteristics of the bare tundish and tundish conf igurations with designed U-type baff les and a round turbulence inhibitor were analyzed using residence time distribution(RTD) curves. Mathematical models for liquid steel in the real plant tundish were established using the fluid dynamics software package Fluent. The flow field, the temperature field, and the RTD curves of liquid steel in the proposed tundish conf igurations were obtained. The results of numerical simulation and water modeling were validated with each other by the predicted and experimental RTD curves. The results of flow field and temperature field were used to ref lect the actual state of a real plant tundish and to choose the optimal FCD. Finaly, from the whole performance of the multi-strand tundish, the optimal scheme was determined by combining the results of water modeling and numerical simulation. With the optimal tundish equipped with U-type baffle with def lector holes and round turbulence inhibitor, not only was the flow characteristic of each strand improved, but also the difference of flow characteristics between multiple strands was smaller.展开更多
Because of the complexities of fluid dynamics equations and the structure of heat exchangers, few theoretical solutions have been acquired to specify the shell side characteristics of the rod baffle heat exchanger （R...Because of the complexities of fluid dynamics equations and the structure of heat exchangers, few theoretical solutions have been acquired to specify the shell side characteristics of the rod baffle heat exchanger （RBHE）. Based on the platform of PHEONICS version 3.5.1, a three-dimensional numerical method for predicting the turbulent fluid flow behavior in the shell side of the rod baffle heat exchangers is developed in this paper. With this method, modeling of the tube bundle is carried out based on the porous media concept using volumetric porosities and applicable flow resistance correlations. Turbulence effects are modeled using a standard κ-ε model. It is shown that the simulation results and experimental results are in good agreement in the shell side. The maximum absolute deviation value of pressure drops is less than 5%, and that of the heat transfer coefficients is less than 8%. Furthermore, the numerical model is used to optimize the structure of the RBHE and improves its performance.展开更多
基金financially supported by the National Natural Science Foundation of China(51504002)
文摘The optimization of flow control devices(FCDs) for a T-type five-strand billet caster tundish was carried out by water modeling and numerical simulation. In water modeling experiments, flow characteristics of the bare tundish and tundish conf igurations with designed U-type baff les and a round turbulence inhibitor were analyzed using residence time distribution(RTD) curves. Mathematical models for liquid steel in the real plant tundish were established using the fluid dynamics software package Fluent. The flow field, the temperature field, and the RTD curves of liquid steel in the proposed tundish conf igurations were obtained. The results of numerical simulation and water modeling were validated with each other by the predicted and experimental RTD curves. The results of flow field and temperature field were used to ref lect the actual state of a real plant tundish and to choose the optimal FCD. Finaly, from the whole performance of the multi-strand tundish, the optimal scheme was determined by combining the results of water modeling and numerical simulation. With the optimal tundish equipped with U-type baffle with def lector holes and round turbulence inhibitor, not only was the flow characteristic of each strand improved, but also the difference of flow characteristics between multiple strands was smaller.
基金supported by the Scientific Research Project of Shanghai Municipal Education Commission (Grant No.06AZ018)
文摘Because of the complexities of fluid dynamics equations and the structure of heat exchangers, few theoretical solutions have been acquired to specify the shell side characteristics of the rod baffle heat exchanger （RBHE）. Based on the platform of PHEONICS version 3.5.1, a three-dimensional numerical method for predicting the turbulent fluid flow behavior in the shell side of the rod baffle heat exchangers is developed in this paper. With this method, modeling of the tube bundle is carried out based on the porous media concept using volumetric porosities and applicable flow resistance correlations. Turbulence effects are modeled using a standard κ-ε model. It is shown that the simulation results and experimental results are in good agreement in the shell side. The maximum absolute deviation value of pressure drops is less than 5%, and that of the heat transfer coefficients is less than 8%. Furthermore, the numerical model is used to optimize the structure of the RBHE and improves its performance.
