Optimal design of structural parameters for shield cutterhead based on fuzzy mathematics and multi-objective genetic algorithm

In order to improve the strength and stiffness of shield cutterhead, the method of fuzzy mathematics theory in combination with the finite element analysis is adopted. An optimal design model of structural parameters for shield cutterhead is formulated,based on the complex engineering technical requirements. In the model, as the objective function of the model is a composite function of the strength and stiffness, the response surface method is applied to formulate the approximate function of objective function in order to reduce the solution scale of optimal problem. A multi-objective genetic algorithm is used to solve the cutterhead structure design problem and the change rule of the stress-strain with various structural parameters as well as their optimal values were researched under specific geological conditions. The results show that compared with original cutterhead structure scheme, the obtained optimal scheme of the cutterhead structure can greatly improve the strength and stiffness of the cutterhead, which can be seen from the reduction of its maximum equivalent stress by 21.2%, that of its maximum deformation by 0.75%, and that of its mass by 1.04%.

Vote-Based Feature Selection Method for Stratigraphic Recognition in Tunnelling Process of Shield Machine

Shield machines are currently the main tool for underground tunnel construction. Due to the complexity and variability of the underground construction environment, it is necessary to accurately identify the ground in real-time during the tunnel construction process to match and adjust the tunnel parameters according to the geological conditions to ensure construction safety. Compared with the traditional method of stratum identifcation based on staged drilling sampling, the real-time stratum identifcation method based on construction data has the advantages of low cost and high precision. Due to the huge amount of sensor data of the ultra-large diameter mud-water balance shield machine, in order to balance the identifcation time and recognition accuracy of the formation, it is necessary to screen the multivariate data features collected by hundreds of sensors. In response to this problem, this paper proposes a voting-based feature extraction method (VFS), which integrates multiple feature extraction algorithms FSM, and the frequency of each feature in all feature extraction algorithms is the basis for voting. At the same time, in order to verify the wide applicability of the method, several commonly used classifcation models are used to train and test the obtained efective feature data, and the model accuracy and recognition time are used as evaluation indicators, and the classifcation with the best combination with VFS is obtained. The experimental results of shield machine data of 6 diferent geological structures show that the average accuracy of 13 features obtained by VFS combined with diferent classifcation algorithms is 91%;among them, the random forest model takes less time and has the highest recognition accuracy, reaching 93%, showing best compatibility with VFS. Therefore, the VFS algorithm proposed in this paper has high reliability and wide applicability for stratum identifcation in the process of tunnel construction, and can be matched with a variety of classifer algorithms. By combining 13 features selected from shield machine data features with random forest, the identifcation of the construction stratum environment of shield tunnels can be well realized, and further theoretical guidance for underground engineering construction can be provided.

Optimization of construction scheme and supporting technology for HJS soft rock tunnel

For a soft rock tunnel under high stress in jointed and swell soft rock （HJS）, two construction schemes pilot-tunneling enlarging excavation and step-by-step excavation were optimized using FLAC20, and the deformation effects of the two construction schemes were verified by field tests. Based on engineer- ing geological investigation and mechanical analysis of large deformations, the complex deformation mechanisms of stress expansion and structural deformation of the soft rock tunnel were confirmed, and support countermeasures from the complex deformation mechanism converted to a single type were proposed, and the support parameters were optimized by field tests. These technologies were proved by engineering practice, which produced significant technical and economic benefits.

Soft rocks in Argentina

Soft rocks are a still fairly unexplored chapter in rock mechanics. Within this category are the clastic sedimentary rocks and pyroclastic volcanic rocks, of low to moderate lithification （consolidation, cemen- tation, new formed minerals）, chemical sedimentary rocks and metamorphic rocks formed by minerals witk Mohs hardness less than 3.5, such as limestone, gypsum, halite, sylvite, between the first and phyllites, graphitic schist, chloritic shale, talc, etc., among the litter. They also include any type Of rock that suffered alteration processes （hydrothermal or weathering）. In Argentina the study of low-strength rocks has not received much attention despite having extensive outcrops in the Andes and great impact in the design criteria. Correlation between geomechanical properties （UCS, deformability） to physical index （porosity, density, etc.） has shown promising results to be better studied. There are many studies and engineering projects in Argentina in soft rock geological environments, some cited in the text （Chihuido dam, N. Kirchner dam, J. Cepernic Dam, etc.） and others such as International Tunnel in the Province of Mendoza （Corredor Bioceanico）, which will require the valuable contribution from rock mechanics. The lack of consistency between some of the physical and mechanical parameters explored from studies in the country may be due to an insufficient amount of information and/or non-standardization of criteria for testing materials. It is understood that more and better academic and professional efforts in improv- ing techniques will result in benefits to the better understanding of the geomechanics of weak rocks.

Study on Ground Deformation during Shield Tunnel Construction

Through the systematic analysis of the ground settlement generated by the process of shield tunneling,the relationships between ground deformation and construction parameters are studied in this paper.Based on the assumption of linear small deformation,a mathematical model of the relationship between ground deformation and construction parameters is set up.The principle and method of optimization for estimating ground deformation is studied.The actual measured data are compared with the results of theoretical analysis in a case.Considering different ground formations in different construction sites with different adverse effects on surface and underground structures,the ground surface deformations caused by shield tunneling is an aimed topic in this paper.The contributions and research implications are the revealed relationships between the ground deformation and the shield tunneling parameters during construction.