Developing a risk assessment system for gas tunnel disasters in China

Gas disasters always restrict the tunnel constructions in mountain area, which becomes a major geological barrier against the development of underground engineering. China is rich in coal resources and has a large amount of gas with a wide range of distribution. However, China experienced not only adverse effects on coal mining but also gas disasters in underground engineering construction, such as tunnels and chambers. With the increased number of tunnels passing through coal-bearing strata, the incidence of gas accidents is also rising. Therefore, the significance of preventing and mitigating gas disasters should be emphasized, and an effective risk assessment method for gas disasters should be established. On the basis of research on over 100 gas tunnels in China, a relatively ideal gas disaster risk assessment method and system for tunnels are established through the following measures. Firstly, geo-environmental conditions and gas situations were analyzed during construction. Secondly, qualitative analysis was combined with quantitative analysis. Finally, the influencing factors of gas disasters, including geological conditions, gas,and human factors, were investigated. The gas tunnel risk assessment system includes three levels:(1) the grading assessment of a gas tunnel during the planning stage,(2) the risk assessment of gas tunnel construction during the design and construction stages,(3) the gas tunnel outburst risk assessment during the coal uncovering stage. This system was applied to the dynamic assessment of gas disaster during the construction of the Zipingpu tunnel of Dujiangyan–Wenchuan Highway(in Sichuan, Southwest China). The assessment results were consistent with the actual excavation, which verified the rationality and feasibility of the system. The developed system was believed to be back-up and applied for risk assessment of gas disaster in the underground engineering construction.

Optimal Deployment Patterns for k-Coverage and k-Connectivity 3D WSNs in Underground Tunnel

In this paper,we first model the mining structure as a arched shape in terms of the tunnel geometry.Based on the regularly placement of nodes in that model,a set of deployment patterns for seamless coverage and k-connectivity is proposed,i.e.1-and 2-connectivity.Further,we figure out the maximum horizontal distance of tangent plane to determine the placement of nodes for k-coverage（k=1,2）.Besides,the mathematical relations between the communication radius and the sensing radius are derived,when the network keeps k-coverage（k=1,2） and k-connectivity（k=2,3） under certain regularity constrains for various patterns.Finally,we demonstrate the optimality of several approaches that we have proposed in the aspect of energy consumption and network lifetime.

Tunnel behaviour and support associated with the weak rock masses of flysch

Flysch formations are generally characterised by evident heterogeneity in the presence of low strength and tectonically disturbed structures. The complexity of these geological materials demands a more specialized geoengineering characterisation. In this regard, the paper tries to discuss the standardization of the engineering geological characteristics, the assessment of the behaviour in underground excava- tions, and the instructions-guidelines for the primary support measures for flysch layer qualitatively. In order to investigate the properties of flysch rock mass, 12 tunnels of Egnatia Highway, constructed in Northern Greece, were examined considering the data obtained from the design and construction records. Flysch formations are classified thereafter in 11 rock mass types （I-XI）, according to the siltstone -sandstone proportion and their tectonic disturbance. A special geological strength index （GSI） chart for heterogeneous rock masses is used and a range of geotechnical parameters for every flysch type is presented. Standardization tunnel behaviour for every rock mass type of flysch is also presented, based on its site-specific geotechnical characteristics such as structure, intact rock strength, persistence and complexity of discontinuities. Flysch, depending on its types, can be stable even under noticeable overburden depth, and exhibit wedge sliding and wider chimney type failures or cause serious deformation even under thin cover. Squeezing can be observed under high overburden depth. The magnitude of squeezing and tunnel support requirements are also discussed for various flysch rock mass types under different overburdens. Detailed principles and guidelines for selecting immediate support mea- sures are proposed based on the principal tunnel behaviour mode and the experiences obtained from these 12 tunnels. Finally, the cost for tunnel support from these experiences is also presented.