Coagulation-flocculation is a proven technique for the removal of suspended solids in wastewater, through the application of single angle turbidimetric measurement. Through this measurement, the coag-flocculation kine...Coagulation-flocculation is a proven technique for the removal of suspended solids in wastewater, through the application of single angle turbidimetric measurement. Through this measurement, the coag-flocculation kinetics and functional parameters behavior of Detarium microcarpumin brewery effluent with respect to pH, dosage and time were followed at room temperature. Process parameters such as order of reaction α, rate constant (K), coagulation period τ1/2 etc were determined. Results indicated that reaction order, rate constant, period, pH and dosage recorded optimum values at 2, 1.8 × 10-2 L/mg.min, 0.152 min, 4 and 100 mg/L, respectively. Maximum efficiency recorded was 96.07% at 30 min. Detarium microcarpum has shown potential as an effective bio-coagulant for the removal of turbidity from brewery effluent.展开更多
A rapid method is described for the determination of petroleum hydrocarbons in soil samples. The method is based on the extraction of hydrocarbons by a solvent and the treatment of the solution with an aqueous solutio...A rapid method is described for the determination of petroleum hydrocarbons in soil samples. The method is based on the extraction of hydrocarbons by a solvent and the treatment of the solution with an aqueous solution of a surfactant to release the hydrocarbons to the water phase in the form of a stable emulsion. The emulsion is then utilized to measure the hydrocarbon content by turbidimetry. The effects of various operating parameters including the surfactant solution composition and time of extraction and time of mixing with the releasing solution are investigated. The stability of the emulsion was improved in acid environment containing and electrolyte. The turbidity values (T) were related with hydrocarbon concentration in the extract (C) by the following equation. Turbidity = 2.75 C + 205.7. With R2 = 0.9929. The soil hydrocarbon content (SHC) measured in μg/g can then be calculated using the formula: SHC = [Extract Vol. (mL) x C]/Sample Wt (g). The results correlated well with the results of total hydrocarbons in soils determined by standard methods. The method was applied for the estimation of hydrocarbons in Passaic river sediments taken from various locations and depths. For field work the method was used to supply data on the hydrocarbon contamination of soil samples taken within an oil refinery and a monitoring well drilled within heavy hydrocarbon waste dumping location.展开更多
文摘Coagulation-flocculation is a proven technique for the removal of suspended solids in wastewater, through the application of single angle turbidimetric measurement. Through this measurement, the coag-flocculation kinetics and functional parameters behavior of Detarium microcarpumin brewery effluent with respect to pH, dosage and time were followed at room temperature. Process parameters such as order of reaction α, rate constant (K), coagulation period τ1/2 etc were determined. Results indicated that reaction order, rate constant, period, pH and dosage recorded optimum values at 2, 1.8 × 10-2 L/mg.min, 0.152 min, 4 and 100 mg/L, respectively. Maximum efficiency recorded was 96.07% at 30 min. Detarium microcarpum has shown potential as an effective bio-coagulant for the removal of turbidity from brewery effluent.
文摘A rapid method is described for the determination of petroleum hydrocarbons in soil samples. The method is based on the extraction of hydrocarbons by a solvent and the treatment of the solution with an aqueous solution of a surfactant to release the hydrocarbons to the water phase in the form of a stable emulsion. The emulsion is then utilized to measure the hydrocarbon content by turbidimetry. The effects of various operating parameters including the surfactant solution composition and time of extraction and time of mixing with the releasing solution are investigated. The stability of the emulsion was improved in acid environment containing and electrolyte. The turbidity values (T) were related with hydrocarbon concentration in the extract (C) by the following equation. Turbidity = 2.75 C + 205.7. With R2 = 0.9929. The soil hydrocarbon content (SHC) measured in μg/g can then be calculated using the formula: SHC = [Extract Vol. (mL) x C]/Sample Wt (g). The results correlated well with the results of total hydrocarbons in soils determined by standard methods. The method was applied for the estimation of hydrocarbons in Passaic river sediments taken from various locations and depths. For field work the method was used to supply data on the hydrocarbon contamination of soil samples taken within an oil refinery and a monitoring well drilled within heavy hydrocarbon waste dumping location.
