A passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed according to the working principle to study the dynamic characteristics of the turbine flow sensors.This simulat...A passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed according to the working principle to study the dynamic characteristics of the turbine flow sensors.This simulation method controls the six degrees of freedom of the impeller using the user-defined functions(UDF)program so that it can only rotate under the impact of fluid.The impeller speed can be calculated in real-time,and the inlet speed can be set with time to obtain the dynamic performance of the turbine flow sensors.Based on this simulation method,three turbine flow sensors with different diameters were simulated,and the reliability of the simulation method was verified by both steady-state and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results.The deviation between the simulation and experiment results is low,with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changed with the inlet velocity of the turbine flow sensor,showing good tracking performance.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.展开更多
Based on the characteristic curve analysis, the method using D(K^2) square difference of meter factor at different flow rates was developed to evaluate the performance of turbine flow sensor in this study. Then accord...Based on the characteristic curve analysis, the method using D(K^2) square difference of meter factor at different flow rates was developed to evaluate the performance of turbine flow sensor in this study. Then according to the distribution of entrance velocity, it was supposed that reducing the blade area near the tip could decrease the linearity error of a sensor. Therefore, the influence of different blade shape parameters on the performance of the sensor was investigated by combining computational fluid dynamics(CFD)simulation with experimental test. The experimental results showed that, for the liquid turbine flow sensor with a diameter of 10 mm, the linearity error was smallest, and the performance of sensor was optimal when blade shape parameter equaled 0.25.展开更多
Computational Fluid Dynamics(CFD)simulation is one of the important methods to study the performance and influencing factors of turbine flow sensors.According to the working characteristics of the turbine flow sensor,...Computational Fluid Dynamics(CFD)simulation is one of the important methods to study the performance and influencing factors of turbine flow sensors.According to the working characteristics of the turbine flow sensor,the passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed in this paper.The reliability of the simulation method is verified by steady-state experiments and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results,and the deviation between the simulation result and the experiment result is low with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changes with the inlet velocity of the turbine flow sensor,which has a good follow-up.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.展开更多
A new type optical fiber sensor--Tip timing Sensor is introduced in this paper. It is mostly used in vibration measurement of turbine blade, which can realize real-time and non-contact measurement.
基金The National Natural Science Foundation of China(No.62173122)the Hebei Key Project of Natural Science Foundation(No.F2021201031)。
文摘A passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed according to the working principle to study the dynamic characteristics of the turbine flow sensors.This simulation method controls the six degrees of freedom of the impeller using the user-defined functions(UDF)program so that it can only rotate under the impact of fluid.The impeller speed can be calculated in real-time,and the inlet speed can be set with time to obtain the dynamic performance of the turbine flow sensors.Based on this simulation method,three turbine flow sensors with different diameters were simulated,and the reliability of the simulation method was verified by both steady-state and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results.The deviation between the simulation and experiment results is low,with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changed with the inlet velocity of the turbine flow sensor,showing good tracking performance.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.
文摘Based on the characteristic curve analysis, the method using D(K^2) square difference of meter factor at different flow rates was developed to evaluate the performance of turbine flow sensor in this study. Then according to the distribution of entrance velocity, it was supposed that reducing the blade area near the tip could decrease the linearity error of a sensor. Therefore, the influence of different blade shape parameters on the performance of the sensor was investigated by combining computational fluid dynamics(CFD)simulation with experimental test. The experimental results showed that, for the liquid turbine flow sensor with a diameter of 10 mm, the linearity error was smallest, and the performance of sensor was optimal when blade shape parameter equaled 0.25.
基金supported by National Natural Science Foundation of China,China(62173122)Hebei Key Project of Natural Science Foundation(F2021201031)Beijing-Tianjin-Hebei Collaborative Innovation Community Construction Project(20540301D)
文摘Computational Fluid Dynamics(CFD)simulation is one of the important methods to study the performance and influencing factors of turbine flow sensors.According to the working characteristics of the turbine flow sensor,the passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed in this paper.The reliability of the simulation method is verified by steady-state experiments and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results,and the deviation between the simulation result and the experiment result is low with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changes with the inlet velocity of the turbine flow sensor,which has a good follow-up.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.
文摘A new type optical fiber sensor--Tip timing Sensor is introduced in this paper. It is mostly used in vibration measurement of turbine blade, which can realize real-time and non-contact measurement.
