Valley-dependent transport in a mescoscopic twisted bilayer graphene device

We study the valley-dependent electron transport in a four-terminal mesoscopic device of the two monolayer graphene nanoribbons vertically stacked together, where the intersection forms a bilayer graphene lattice with a controllable twist angle. Using a tight-binding lattice model, we show that the longitudinal and transverse conductances exhibit significant valley polarization in the low energy regime for small twist angles. As the twist angle increases, the valley polarization shifts to the high energy regime. This arises from the regrouping effect of the electron band in the twisted bilayer graphene region. But for relatively large twist angles, no significant valley polarization is observed. These results are consistent with the spectral densities of the twisted bilayer graphene.

Twisted Yangian Y(sp_(2))的单权模

讨论了Twisted Yangian Y(sp_(N))的权模问题,构造了Y(sp_(2))的一类无限维单权模,分类了具有一个一维权空间的Y(sp_(2))单权模.

Tubular Heat Enhancement Using Twisted Tape Inserts with Large Holes

Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fillers inside the tubes to enhance heat transfer.This investigation considered the effects of twisted tapes with large holes on a tubular heat exchanger’s(HX)heat transmission,pressure drop,and thermal boosting factor.In the experimental section,counter-swirl flow generators used twisted tapes with pairs of 1.0 cm-diameter holes and changes in porosity(Rp)at 1.30%and 2.70%.In the experiments,air was utilized as a working fluid in a tube with a circular cross-section.The turbulent flow was considered,with Reynolds numbers(Re)domain from 4800 to 9500,and a boundary condition with a uniform wall heat flux was constructed.The findings expound that when the number of holes rose,the Nusselt number(Nu),the factor of friction(f),and the thermal enhancement factor(η)all increased as well.Additionally,as the friction factor increased,the Nusselt number of the tape-equipped tube was noticeably higher.Additionally,it was discovered that the friction factor was between 70%and 94%lower than the values of the tube without tape,while the(Nu)was between 87%and 97%higher than the conventional tube values.The maximum value ofηis 89%.According to the experimental results,empirical correlations for Nu,f,andηwere also generated.

Linear Functional Equations and Twisted Polynomials

A certain variety of non-switched polynomials provides a uni-figure representation for a wide range of linear functional equations. This is properly adapted for the calculations. We reinterpret from this point of view a number of algorithms.

Twisted Integration of Complex Oxide Magnetoelectric Heterostructures via Water‑Etching and Transfer Process

Manipulating strain mode and degree that can be applied to epitaxial complex oxide thin films have been a cornerstone of strain engineering.In recent years,lift-off and transfer technology of the epitaxial oxide thin films have been developed that enabled the integration of heterostructures without the limitation of material types and crystal orientations.Moreover,twisted integration would provide a more interesting strategy in artificial magnetoelectric heterostructures.A specific twist angle between the ferroelectric and ferromagnetic oxide layers corresponds to the distinct strain regulation modes in the magnetoelectric coupling process,which could provide some insight in to the physical phenomena.In this work,the La_(0.67)Sr_(0.33)MnO_(3)(001)/0.7Pb(Mg_(1/3)Nb_(2/3))O_(3)-0.3PbTiO_(3)(011)(LSMO/PMN-PT)heterostructures with 45.and 0.twist angles were assembled via water-etching and transfer process.The transferred LSMO films exhibit a fourfold magnetic anisotropy with easy axis along LSMO<110>.A coexistence of uniaxial and fourfold magnetic anisotropy with LSMO[110]easy axis is observed for the 45°Sample by applying a 7.2 kV cm^(−1)electrical field,significantly different from a uniaxial anisotropy with LSMO[100]easy axis for the 0°Sample.The fitting of the ferromagnetic resonance field reveals that the strain coupling generated by the 45°twist angle causes different lattice distortion of LSMO,thereby enhancing both the fourfold and uniaxial anisotropy.This work confirms the twisting degrees of freedom for magnetoelectric coupling and opens opportunities for fabricating artificial magnetoelectric heterostructures.

Visualizing the Local Twist Angle Variation within and between Domains of Twisted Bilayer Graphene

Moirésuperlattices in twisted two-dimensional materials have emerged as ideal platforms for engineering quantum phenomena,which are highly sensitive to twist angles,including both the global value and the spatial inhomogeneity.However,only a few methods provide spatial-resolved information for characterizing local twist angle distribution.

Natural vibration of cantilever porous twisted plate with variable thickness in different directions

In this paper,the blade is assumed to be a rotating variable thickness cantilever twisted plate structure,and the natural vibrations of variable thickness cantilever twisted plate made of metal porous material are studied.It is assumed that the thickness of the plate changes along spanwise direction and chordwise direction,respectively,and it changes in both directions.The classical thin shell theory,the first and second fundamental forms of surface and von Karman geometric relationship are employed to derive the total potential energy and kinetic energy of the cantilever twisted plate,in which the centrifugal force potential due to high rotational speed is included.Then,according to the Rayleigh-Ritz procedure and applying the polynomial functions which satisfy the cantilever boundary conditions,the dynamic system expressed by equations of motion is reduced to an eigenvalue problem.By numerical simulation,the frequency curves and the mode shapes of the twisted plate can be obtained to reveal the internal connection between natural vibration and the parameters.A series of comparison studies are performed to verify the accuracy of the present formulation and calculations,in which compared data come from experimental,finite element method and theoretical calculation,respectively.The influence of pre-twist angle,three different forms of thickness taper ratio and rotational speed on natural vibration,mode exchange and frequency veering phenomenon of the system is discussed in detail.In addition,the approach proposed here can efficiently extract analytical expressions of mode functions for rotating variable thickness cantilever twisted plate structures.

Correlated states in alternating twisted bilayer–monolayer–monolayer graphene heterostructure

Highly controlled electronic correlation in twisted graphene heterostructures has gained enormous research interests recently,encouraging exploration in a wide range of moirésuperlattices beyond the celebrated twisted bilayer graphene.Here we characterize correlated states in an alternating twisted Bernal bilayer–monolayer–monolayer graphene of~1.74°,and find that both van Hove singularities and multiple correlated states are asymmetrically tuned by displacement fields.In particular,when one electron per moiréunit cell is occupied in the electron-side flat band,or the hole-side flat band(i.e.,three holes per moiréunit cell),the correlated peaks are found to counterintuitively grow with heating and maximize around 20 K–a signature of Pomeranchuk effect.Our multilayer heterostructure opens more opportunities to engineer complicated systems for investigating correlated phenomena.

Machine learning of theΓ-point gap and flat bands of twisted bilayer graphene at arbitrary angles

The novel electronic properties of bilayer graphene can be fine-tuned via twisting,which may induce flat bands around the Fermi level with nontrivial topology.In general,the band structure of such twisted bilayer graphene(TBG)can be theoretically obtained by using first-principles calculations,tight-binding method,or continuum model,which are either computationally demanding or parameters dependent.In this work,by using the sure independence screening sparsifying operator method,we propose a physically interpretable three-dimensional(3D)descriptor which can be utilized to readily obtain theΓ-point gap of TBG at arbitrary twist angles and different interlayer spacings.The strong predictive power of the descriptor is demonstrated by a high Pearson coefficient of 99%for both the training and testing data.To go further,we adopt the neural network algorithm to accurately probe the flat bands of TBG at various twist angles,which can accelerate the study of strong correlation physics associated with such a fundamental characteristic,especially for those systems with a larger number of atoms in the unit cell.

Straight and twisted Weyl nodal line phonons in Ho2CF2 material

Based on first-principles calculations, symmetry analysis and model construction, we predict that Ho2CF2hosts both straight and twisted Weyl nodal lines in its bulk phonon spectrum. We identify that the top two phonon bands entangle with each other, forming two straight Weyl nodal lines on the K–H and K′–H′paths at the Brillouin zone(BZ) boundary,and six twisted Weyl nodal lines within the BZ. All the Weyl nodal lines along the kz direction and across the entire BZ.The symmetry analysis indicates that these Weyl nodal lines are protected by the PT symmetry and crystal symmetry. The Berry phase and drumhead-like nontrivial surface states are calculated. We also construct a tight-binding model to describe these nodal lines. Our work provides an excellent material platform for exploring the fascinating physics associated with straight and twisted Weyl nodal line phonons.

Preface to Special Topic on Twisted van der Waals Heterostructures

Twisted van der Waals heterostructures are becoming the building blocks for engineering new device structures, in which their electronic, optical and mechanical properties can be tuned by changing the “twist” angle between layers of 2D materials. Such twisted 2D heterostructures offer a unique opportunity to create a new field of “twistronics” by mechanically stacking different 2D van der Waals materials together.

Optical Tunable MoiréExcitons in Twisted Hexagonal GaTe Bilayers

Optical fine-tunable layer-hybridized Moiréexcitons are highly in demand for emerging many-body states in two-dimensional semiconductors.We report naturally confined layer-hybridized bright Moiréexcitons with long lifetimes in twisted hexagonal GaTe bilayers,using ab initio many-body perturbation theory and the Bethe–Salpeter equation.Due to the hybridization of electrons and holes between layers,which enhances the brightness of excitons,the twisted bilayer system becomes attractive for optical applications.We find that in both R and H-type stacking Moirésuperlattices,more than 200 meV lateral quantum confinements occur on exciton energies,which results in two scenarios:(1)The ground state bright excitons XA are found to be trapped at two high-symmetry points,with opposite electric dipoles in the R-stacking Moirésupercell,forming a honeycomb superlattice of nearest-neighbor dipolar attraction.(2)For H-stacking case,the XA is found to be trapped at only one high-symmetry point exhibiting a triangular superlattice.Our results suggest that twisted h-GaTe bilayer is one of the promising systems for optical fine-tunable excitonic devices and provide an ideal platform for realizing strong correlated Bose–Hubbard physics.

Coupled Ferroelectricity and Correlated States in a Twisted Quadrilayer MoS_(2) Moiré Superlattice

Moiré superlattices have emerged as a highly controllable quantum platform for exploration of various fascinating phenomena,such as Mott insulator states,ferroelectric order,unconventional superconductivity and orbital ferromagnetism.Although remarkable progress has been achieved,current research in moiré physics has mainly focused on the single species properties,while the coupling between distinct moiré quantum phenomena remains elusive.Here we demonstrate,for the first time,the strong coupling between ferroelectricity and correlated states in a twisted quadrilayer MoS2moiré superlattice,where the twist angles are controlled in sequence to be ~57°,~0°,and ~-57°.Correlated insulator states are unambiguously established at moiré band filling factors v = 1,2,3 of twisted quadrilayer MoS_(2).Remarkably,ferroelectric order can occur at correlated insulator states and disappears quickly as the moiré band filling deviates from the integer fillings,providing smoking gun evidences of the coupling between ferroelectricity and correlated states.Our results demonstrate the coupling between different moiré quantum properties and will hold great promise for new moiré physics and applications.

Emergence of correlations in twisted monolayer-trilayer graphene heterostructures

Twisted bilayer graphene heterostructures have recently emerged as a well-established platform for studying strongly correlated phases,such as correlated insulating,superconducting,and topological states.Extending this notion to twisted multilayer graphene heterostructures has exhibited more diverse correlated phases,as some fundamental properties related to symmetry and band structures are correspondingly modified.Here,we report the observations of correlated states in twisted monolayer-trilayer(Bernal stacked)graphene heterostructures.Correlated phases at integer fillings of the moire unit cell are revealed at a high displacement field and stabilized with a moderate magnetic field on the electron-doping side at a twist angle of 1.45°,where the lift of degeneracy at the integer fillings is observed in the Landau fan diagram.Our results demonstrate the effectiveness of moire engineering in an extended structure and provide insights into electric-field tunable correlated phases.

Tunable correlation in twisted monolayer–trilayer graphene

Flat-band physics of moirésuperlattices,originally discovered in the celebrated twisted bilayer graphene,have recently been intensively explored in multilayer graphene systems that can be further controlled by electric field.In this work,we experimentally find the evidence of correlated insulators at half filling of the electron moiréband of twisted monolayer–trilayer graphene with a twist angle around 1.2°.Van Hove singularity(VHS),manifested as enhanced resistance and zero Hall voltage,is observed to be distinct in conduction and valence flat bands.It also depends on the direction and magnitude of the displacement fields,consistent with the asymmetric crystal structure.While the resistance ridges at VHS can be enhanced by magnetic fields,when they cross commensurate fillings of the moirésuperlattice in the conduction band,the enhancement is so strong that signatures of correlated insulator appear,which may further develop into an energy gap depending on the correlation strength.At last,Fermi velocity derived from temperature coefficients of resistivity is compared between conduction and valence bands with different displacement fields.It is found that electronic correlation has a negative dependence on the Fermi velocity,which in turn could be used to quantify the correlation strength.

Pipes with Trapezoidal Cut Twisted Tape Inserts in the Laminar Flow Regime:Nusselt Number and Friction Coefficient Analysis

The thermal behavior of pipes with a twisted tape inside(used to enhance heat transfer through the tube wall)is studied in the laminar flow regime.Oil is used as the work fluid with the corresponding Reynolds Number spanning the interval 200–2000.It is found that in such conditions the‘Nusselt Number’(Nu)gradually increases with reducing the tape twist ratio,whereas the friction factor is detrimentally affected by the presence of the tape(as witnessed by the comparison with the companion case where a plain tube is considered).In particular,it is shown that the heat transfer efficiency can be improved by nearly 69%if tape inserts with a relatively low twist ratio are used.On the basis of these findings,it is concluded that loose fit tape inserts are superior to tight fit tapes in terms of heat transfer and ease of replacement.

Analysis of Friction and Heat Transfer Characteristics of Tubes with Trapezoidal Cut Twisted Tape Inserts

The thermo-hydraulic properties of circular tubes with a twisted tape inside(used accordingly to induce turbulence and enhance heat transfer through the tube wall)are described for Reynolds Numbers ranging from 830 to 1990.Tapes twisted with the three distinct twist ratios are considered,namely,6,4.4 and 3.Air is used as the working fluid in several tests.For the sake of comparison,the standard tube with no insert is also examined.It is shown that in the presence of the twisted tape,the‘frictional factor’,‘Nusselt Number’and the‘thermal performance factor’are much higher than those obtained for the plain tube.Moreover,the tapes having the lowest twist ratio,i.e.,3,are more effective than the others in terms of heat transfer augmentation.The‘thermal performance factor’is greater than one for all the twisted tapes used in the experiments,which confirms the enhanced performances of the heat exchanger and the related savings in terms of total energy.

Large valley Nernst effect in twisted multilayer graphene systems

Valley Nernst effect is a newly proposed and experimentally confirmed effect,which could be used to design novel thermoelectric devices.We study the valley Nernst effect in(M+N)-layer twisted multilayer graphene systems by a simple low-energy effective model.It is found that the total valley Nernst coefficient(VNC)is three orders of magnitude larger than that in monolayer group-Ⅵdichalcogenides.The total VNC increases with the increase of layer numbers.It is shown that the total VNC exhibits a structure with three peaks as a function of the Fermi energy.We identify that the central peak is always negative stemming from the flat band.Two shoulder peaks are positively induced by the conduction and valence bands,respectively.These predicted features can be tested experimentally.The present work would shed more light on valley caloritronics.

基于Twisted架构的GPS协议转换软网关

提出了一种服务器端可扩展的基于SIP协议的GPS设备协议转换软网关架构,以解决不同厂商GPS设备私有协议而导致的兼容性差、服务器端软件复杂等问题.软网关基于Python的Twisted开源网络框架构建,保证了软件的健壮性和代码的简洁性.软网关采用SIP协议对通信会话过程的统一管理,从而分担了服务器解析不同私有协议的系统开销,简化了服务器端软件的复杂性,同时加强了通信会话管理与多媒体数据扩展能力.

镍钛锉Hyflex CM、Twisted Files和ProTaper Gold预备重度弯曲根管的成形效果

目的比较Hyflex CM(HCM)、Twisted Files(TF)和ProTaper Gold(PTG)预备重度弯曲根管的成形效果。方法将30颗具有重度弯曲根管的离体磨牙随机分为HCM组、TF组和PTG组,每组10颗,每组采用相应的镍钛锉预备根管。根管预备前后分别用显微CT扫描各离体磨牙,获取轴向横截面图片,测量距离根尖孔1 mm、2 mm、3 mm、4 mm、5 mm处和根管最大弯曲处的近、远中根管壁厚度最小值,计算并比较各组的根管偏移量及轴中心率。结果3组离体磨牙距离根尖孔1~5 mm处的根管偏移量、轴中心率差异有统计学意义(均P<0.05)。3组离体磨牙根管最大弯曲处的根管偏移量、轴中心率差异有统计学意义(均P<0.05),其中PTG组的根管偏移量最小、轴中心率最大。结论HCM、TF和PTG均可安全有效地预备重度弯曲根管,其中PTG的中心定位能力更好,更适合重度弯曲根管的预备。