Two stages kinetics of municipal solid waste inoculation composting processes

In order to understand the key mechanisms of the composting processes, the municipal solid waste(MSW) composting processes were divided into two stages, and the characteristics of typical experimental scenarios from the viewpoint of microbial kinetics was analyzed. Through experimentation with advanced composting reactor under controlled composting conditions, several equations were worked out to simulate the degradation rate of the substrate. The equations showed that the degradation rate was controlled by concentration of microbes in the first stage. The degradation rates of substrates of inoculation Run A, B, C and Control composting systems were 13 61 g/(kg·h), 13 08 g/(kg·h), 15 671 g/(kg·h), and 10 5 g/(kg·h), respectively. The value of Run C is around 1 5 times higher than that of Control system. The decomposition rate of the second stage is controlled by concentration of substrate. Although the organic matter degradation rates were similar to all Runs, inoculation could reduce the values of the half velocity coefficient K \-m and could be more efficient to make the composting stable. Particularly, for Run C, the degradation rate is high in the first stage, and K \-m is low in the second stage. The results indicated that the inoculation was efficient for the composting processes.

Is there sufficient evidence to support the use of antibiotic holiday just before the second stage of an infected total hip or knee arthroplasty revision surgery?

The practice of implementing an antibiotic holiday before the second stage of hip or knee arthroplasty is currently controversial due to limited evidence for this approach,as per the International Consensus Meeting 2018 on Musculoskeletal Infection.A greater understanding of this issue could augment the quality of Alrayes and Sukeik’s mini-review(2023)on diagnosing,managing,and treating periprosthetic knee infections.However,a significant lack of literature exists concerning the optimal duration for the antibiotic holiday,calling for more research before establishing any clinical guidelines.

Genetic Types, Spatiotemporal Distribution of Ore Deposits and Sources of Ore-forming Materials in the Xuancheng Area, Anhui Province

In recent years,several large and medium-sized ore deposits have been discovered in the shallow cover of Xuancheng,Anhui Province,indicating that this area has a productive metallogenic geological background and may be a potential prospecting region.Based on systematic investigation,the geological and mineralization characteristics of porphyry Cu-Au deposits and skarn Cu-Mo-W deposits in this region have been summarized.Zircon U-Pb dating(LA-ICPMS)of the Chating quartz-diorite porphyry and the Kunshan biotite pyroxene diorite yield concordia ages of 145.5±2.1 Ma and 131.8±2.1 Ma,respectively.Meanwhile,the Re-Os dating analyses for molybdenite from the Shizishan and Magushan skarn Cu-Mo deposits yielded 133.81±0.86 Ma and 143.8±1.4 Ma ages,respectively.When viewed in conjunction with previous studies,it is suggested that twostage(the early stage of 145-135 Ma and the late stage of 134-125 Ma)magmatism may have occurred during the Mesozoic in Xuancheng region.Early stage intrusive rocks are distributed along both sides of the Jiangnan deep fault(JDF).The intrusive rocks to the north of the JDF are mainly quartzdiorite porphyry and granodiorite(porphyry)rocks,related to porphyry Cu-Au deposits and skarn-type Cu-Mo-W deposits.These deposits belong to the first stage of the porphyry-skarn copper gold metallogenic belt of the Middle-Lower Yangtze Metallogenic Belt(MLYB),associated with the high potassium calc-alkaline intermediate-acid intrusions.The magmatic and ore-forming materials are mainly derived from the enriched lithospheric mantle.South of the JDF,the Magushan granodiorite is a representative intrusive rock of the first stage I-type granite,which hosts the Magushan Cu-Mo skarn deposit,similar to the W-Mo-Cu skarn deposits in the Eastern Segment of the Jiangnan Uplift Metallogenic Belt(ESJUB).The magmatic and metallogenic materials mainly came from the Neoproterozoic basement,with the possible participation of a small amount of mantle components.The late stage magmatism was dominated by volcanic rocks with a small amount of intrusive rocks,which were consistent with the limited volcanic-intrusive activities in the second stage of the MLYB.The H-O stable isotopes of ore deposits in the region indicate that the ore-forming hydrothermal fluids of the porphyry and skarn deposits were mostly of magmatic water for the ore-forming stage,the percentage of meteoric water obviously increasing during the late ore-forming stage.The ore-forming materials of the deposits are mainly from the deep magma with a few sedimentary wall rocks,according to the stable carbon isotopes of the carbonates in the ore deposits.Additionally,according to previous research,the molybdenite from the MLYB has a higher Re content than that of the ESJUB.The higher content of Re in the molybdenite from the Shizishan deposit is identical to that of MLYB rather than ESJUB,whereas Re characteristics in molybdenite of Magushan deposit are similar to that of ESJUB.The differences in Re characteristics indicate the different deep processes and ore-forming material sources(mainly mantle composition for the former and crustal materials for the latter)of these ore deposits on opposite sides of the JDF.

DESIGN OF HIGH VOLTAGE POWER CONVERTER FOR TRAVELING WAVE TUBE AMPLIFIER

Traveling Wave Tubes(TWTs) are widely used in the radar and communications system as RF power amplifiers. A highly sophisticated power supply is required by TWT. In order to meet the severe requirements of Traveling Wave Tube Amplifier(TWTA), a novel two-stage topology high voltage converter for TWTA is proposed.The converter is based on Zero-Voltage Switching and Zero-Current Switching(ZVS/ZCS) resonant techniques. The high voltage converter operation principles are investigated and major features of the converter are discussed. The power switching mode of ZVS/ZCS is obtained. The experimental results show that the converter has good soft switching characteristics. Compared to the conventional hard switched Pulse Width Modulation(PWM) techniques, the high efficiency and low ripple of the converter for TWTA are realized. The efficiency of High Voltage Electronic Power Conditioners(HV-EPC) over 93.5% under the condition of 38~46 V input voltage and 260~300 W input power. The switching frequency of first-stage(preregulator) of HV-EPC is 89 k Hz and the switching frequency of second-stage(postregulator) is 44.5 k Hz. The highest output voltage of the HV-EPC is helix voltage which is about –6.8 kV. It is especially suitable for TWTA utilized in space satellite applications due to its high switching frequency and high power density.