Predictive Sliding Mode Control to a Thermal Process for Batch Dyeing

The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used proportion integration differentiation(PID) algorithm had been limited,a novel method was developed to precisely control the heating and cooling stages for batch dyeing process based on predictive sliding mode control(SMC) algorithm.Firstly,a special predictive sliding mode model was constructed according to the principle of generalized predictive control(GPC);secondly,an appropriate reference trajectory for SMC was designed based on the improved approaching law;finally,the predictive sliding mode model and the Diophantine equation were used to predict the output and then the optimized control law was derived using the generalized predictive law.This method combined GPC and the SMC with their respective advantages,so it could be applied to time-delay process,making the control system more robust.Simulation experiments show that this algorithm can well track the temperature variation for the batch dyeing process.

Short wet-steam dyeing process of cotton fabrics with reactive dyes

The effects of Reactive Black 5 utilized to cotton fabrics by short wet-steam process on the dyeing properties were investigated. This study will provide a theoretical reference for short wet-steam process of cotton fabrics with bifunctional reactive dyes. The optimal amount of Selilao agent was 20 g/L, while the soaping and rubbing fastness of the dyed cotton fabrics were both reached to 4-5 rating.

Treatment of a dyeing wastewater from a woolen mill using an A/O membrane bio-reactor

An anaerobic/oxic membrane bioreactor (A/O MBR) was used for treatment of dyeing wastewater from a woolen mill. COD and color of the wastewater were 54—473 mg/L and 40—400 dilution time (DT) respectively. The ratio of BOD 5/COD was less than 0.13. By the A/O MBR process, the average removal of COD, BOD 5, color and turbidity was 82%, 96%, 71% and 99%, respectively. The average COD, BOD 5, color and turbidity of effluent was 37 mg/L, 0.8 mg/L, 40 DT and 0.44 NUT respectively. The effluent COD met the local standard of reuse water in Beijing, China. The average COD volume load of the anaerobic biological tank was 0.0483 kgCOD/(m 3·d) and that of the aeration tank of the MBR was 0.3589 kgCOD/(m 3·d). The sludge load of the MBR was 0.19 kgCOD/(kg·MLSS·d) on average and the maximum of that was 0.4 kgCOD/(kg·MLSS·d). The flux of the A/O membrane bioreactor could be remained at larger than 50 L/(h·m 2·0.1MPa). The results indicated that A/O membrane bioreactor has technical feasibility for treatment of woolen mill wastewater.

Procion MX Dyes在彩色蜡染制作工艺中的应用研究

文章以彩色蜡染制作工艺为研究对象,将文献研究法与实践相结合,从画蜡技巧、上色与固色原理、艺术表现技巧等方面解读Procion MX Dyes在彩色蜡染制作工艺中的应用原则和技巧。借助Procion MX Dyes的应用,提升了彩色蜡染的艺术表现力和使用价值,为蜡染产业的发展提供了可行性参考。

Kinetics of aerobically activated sludge on terylene artificial silk printing and dyeing wastewater treatment

Aerobically activated sludge processing was carried out to treat terylene artificial silk printing and dyeing wastewater (TPD wastewater) in a lab-scale experiment, focusing on the kinetics of the COD removal. The kinetics pa-rameters determined from experiment were applied to evaluate the biological treatability of wastewater. Experiments showed that COD removal could be divided into two stages, in which the ratio BOD/COD (B/C) was the key factor for stage division. At the rapid-removal stage with B/C>0.1, COD removal could be described by a zero order reaction. At the mod-erate-removal stage with B/C<0.1, COD removal could be described by a first order reaction. Then Monod equation was introduced to indicate COD removal. The reaction rate constant (K) and half saturation constant (KS) were 0.0208-0.0642 L/(gMLSS)h and 0.44-0.59 (gCOD)/L respectively at 20 C-35 C. Activation energy (Ea) was 6.05104 J/mol. By comparison of kinetic parameters, the biological treatability of TPD wastewater was superior to that of traditional textile wastewater. But COD removal from TPD-wastewater was much more difficult than that from domestic and industrial wastewater, such as papermaking, beer, phenol wastewater, etc. The expected effluent quality strongly related to un-biodegradable COD and kinetics rather than total COD. The results provide useful basis for further scaling up and efficient operation of TPD wastewater treatment.

Degradation of Dyestuff Pollutant Sudan I Using Advanced Oxidation Process

Due to an increasing environmental pollution, a search for the cost effective treatment and disposal of the dyes from the textile effluents is getting more and more importance. Oxidation and reduction processes play important roles in the degradation treatments of the azo dyes. The latter process is more effective and in consequence its mechanism is also better understood. The mechanism of the oxidation processes, the intermediates involved in these reactions and their role in the effectiveness of the oxidative degradation of the azo dyes, viz, phenyl azo b-naphthol (PAN), Sudan I. On exposure to sunlight at 2 1/2 hours for various samples in different concentrations of PAN mixed with Fenton reagent, when the reactive intermediate?reacted with the colour, the pH vs. absorbance generally showed significant degradation in between pH 5 and 6. The results were compared with the same samples on exposure to uv-light of 254 nm and irradiated at 20 minutes. The degradation occurred in samples of relatively high concentrations, viz, 10-3 and 5 × 10-4 mol· dm-3 at near neutral pH 6 whereas. Low concentration samples such as 10-4 and 5 × 10-5 mol·dm-3 showed degradation towards more acidic range of pH 2 to 4. In advanced oxidation process (AOP), generally reactive, strongly oxidizing ·OH radicals play a main role in destruction of the dye molecules. The proposed mechanisms and the rate coefficients for the reactions of ·OH intermediates with the dye molecules and with model compounds are summarized.

Low Temperature Dyeing and Shrinkage-Resistance Finishing of Wool by Composition of Salt-Ammonia and Enzyme Treatment

Wool top and knitted fabric were treated with ammonia in the presence of sodium chloride （salt-ammonia process）. The effectiveness of salt-ammonia process traditionally used as pretreatment for low temperature dyeing has been investigated for conferring shrink-resistance of wool. The pretreatmont of salt-ammonia process followed by enzymatic treatment has been proved that contribute to not only the enhancement of dyeing behavionr but also shrinkage-resistance in the present studies. A novel composition of salt-ammonia pretreatment, oxidized and reduced treatment as well as protease modification was recommended to achieve low temperature dyeing and shrinkage-resistance of wool. At the same time, the process conditions were optimized by orthogonal array and assessed by dye uptake rate, weight loss and area shrinkage. Laboratory experiments showed that the knitted fabric treated according to optimized conditions of the combined process, achieved not only improvement of dye abilities but also the strict requirement of machine-washable, representing a possible alternative to chlorination.

Applicative Study(Part I):The Excellent Conditions to Remove in Batch Direct Textile Dyes(Direct Red,Direct Blue and Direct Yellow)from Aqueous Solutions by Adsorption Processes on Low-Cost Chitosan Films under Different Conditions

In recent years the development of chitosan (CH) based materials as useful adsorbent polymeric matrices is an expanding field in the area of adsorption science. Even though CH has been successfully used for dye removal from aqueous solutions due to its low cost, no considerations have been made about, for example, the effect of changing the pH of chitosan hydrogelor about the dehydrating effect of Ethanol (EtOH) treatment of chitosan film on the dyes removal from water. Consequently in our laboratory we carried out a study focusing the attention, mainly, on the potential use of CH films under different conditions, such as reducing the intrinsic pH, increasing the hydrophobic character by means of ethanol treatment and neutralization of CH films to improve their absorption power. Textile anionic dyes named Direct Red 83:1, Direct Yellow 86 and Direct Blue 78 have been studied with the aim of reducing the contact time of CH film in waste water improving the bleaching efficiency. Neutralized acid CH film and longtime dehydrated one result to be the better films in dye removal from water. Also the reduction of the CH solution acidity during the film preparation determines the decreasing of the contact time improving the results. The effect of initial dye concentration has been examined and the amount of dye adsorption in function of time t, qt (mg/cm2), for each analyzed film has been evaluated comparing the long term effect with the decoloration rate. A linear form of pseudo-first-order Lagergren model has been used and described. The best condition for removing all examined dyes from various dye solutions appears to be the dehydration of a novel projected CH film obtained by means of the film immersion in EtOH for 4 days. Also CH films prepared by well-known literature procedure and neutralized with NaOH treatment appear having an excellent behavior, however the film treatment requires a large quantity of water and time.

De-colorization of Reactive Brilliant Orange X-GN by a novel rotating electrochemical disc process

A novel electrochemical setup for wastewater treatment-rotating electrochemical disc process(RECDP)was developed in this article. The anode and cathode are distributed alternatively and evenly on a flat round disc,which was designed to improve mass transfer of organics from bulk solution to electrode surface,while at the same time increasing oxygen transfer from air to the liquid to benefit the organics oxidization.The color removal of dye Reactive Brilliant Orange X-GN(RBO)was experimentally investigated u...

Solar Photocatalytic Degradation of Textile Dyes in TiO_2 Suspended Solutions

The degradation and decolourization of direct dye(Everdirect supra turguoise blue,FBL),acidic dye(Isolan orange S-RL) and vat dye(Indanthren red FBB) have been investigated by solar/TiO2 process.The effects of solution pH,dye concentration,dosage of TiO2 and nano-size of TiO2 have been studied.The increase in initial pH(3,5 and 11) and dye concentration decrease the removal rate.The treatment for FBB and FBL dye solutions is more efficient than that of S-RL.Under optimum conditions,the color removal is found to be almost complete for FBB and FBL while that of S-RL also reaches 95%.Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model(L-H model) have been fitted to the experimental data and found to correlate the adsorption patterns as well as the kinetics of the dyes studied.

Green synthesis of bentonite-supported iron nanoparticles as a heterogeneous Fenton-like catalyst:Kinetics of decolorization of reactive blue 238 dye

This study aimed to synthesize green tea nano zero-valent iron(GT-NZVI)and bentonite-supported green tea nano zero-valent iron(BGT-NZVI)nanoparticles using green tea extracts in an environmentally sustainable way.Bentonite was used as a support material because it disperses and stabilizes GT-NZVI,and it helps to reduce the cost,increase the adsorption capacity of GT-NZVI,and decrease the optimum amount of GT-NZVI used in Fenton-like oxidation.A scanning electron microscope,an atomic force microscope,and a Fourier transform infrared spectroscope were used to characterize GT-NZVI and B-GT-NZVI,while the zeta potential was measured to evaluate the stability of iron nanoparticles.The decolorization kinetics of reactive blue 238(RB 238)dye in the aqueous phase in the Fenton-like oxidation process were investigated as well.The effects of various experimental conditions such as reaction time,dosages of catalysts,concentration of H2O2,temperature,addition of inorganic salts,and other parameters were investigated.The results show that the oxidative degradation efficiencies of RB 238 dye catalyzed by GT-NZVI and B-GT-NZVI were 93.5%and 96.2%,respectively,at the optimum reaction conditions as follows:c(H2O2)¼5 mmol/L,r(GT-NZVI)¼0.5 g/L or r(B-GT-NZVI)¼0.5 g/L,c(RB 238 dye)¼0.05 mmol/L,and pH¼2.5 at 180 min.The best catalytic performance was exhibited when B-GT-NZVI was used.Three kinetic models were employed,and the second-order model was found to be the best model representing the experimental kinetic data of RB 238 dye.The value of activation energy decreased from 38.22 kJ/mol for GT-NZVI to 14.13 kJ/mol for B-GT-NZVI.This indicates that the effect of B-GT-NZVI in decreasing the energy barrier is more pronounced than that of the GT-NZVI catalyst,leading to improved Fenton-like oxidation processes.©2020 Hohai University.Production and hosting by Elsevier B.V.This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

SYNTHESIS AND OPTICAL PROPERTIES OF A NOVEL ORGANIC/INORGANIC HYBRID NONLINEAR OPTICAL POLYMER VIA SOL-GEL PROCESS

A new organic/inorganic hybrid nonlinear optical (NLO) material was developed by the sol-gel process of an alkoxysilane dye with tetraethoxysilane. A NLO moiety based on 4-nitro-4 ' -hydroxy azobenzene was covalently bonded to the triethoxysilane derivative, i.e, gamma -isocyanatopropyl triethoxysilane. The preparation process and properties of the sol-gel derived NLO polymer were studied and characterized by SEM, FTIR,H-1-NMR, UV-Vis, DSC and second harmonic generation (SHG) measurement. The results indicated that the chemical bonding of the chromophores to the inorganic SiO2 networks induces low dipole alignment relaxation and preferable orientational stability. The SHG measurements also showed that the bonded polymer film containing 75 wt% of the akoxysilane dye has a high electro-optic coefficient (r(33)) of 7.1 pm/V at 1.1 mum wavelength, and exhibit good SHG stability, the r(33) values can maintain about 92.7% of its initial value at room temperature for 90 days, and can maintain about 59.3% at 100 degreesC for 300 min.

An Effective of Dye Molecules with Cadmium Sulfide Nanorods in Dye Sensitized Solar Cell (DSSCs)

The aligned hexagonal cadmium sulfide nanorods (CdSNR) have been synthe-sized by hydrothermal technique at 200&#186C on fluorine tin oxide (FTO) sub-strates. Dye sensitized solar cells (DSSCs) based on the photoelectrode core-shell CdSNR array with conductive polymers nanocomposite of polyaniline (PANI) and poly(3,4-ethylenedioxyl-thiophene)/poly(styrene-sulfonate) (PEDOT:PSS) were fabricated and designed with different types of dye molecules. DSSCs were characterized utilizing scanning electron microscopy (SEM), Raman scattering, energy dispersive spectroscopy (EDS), UV-Vis absorption spectroscopy, X-ray diffraction (XRD), and photocurrent-voltage (J-V) characteristic. Results show that under illumination (AM 1.5 G), the high power conversion energy (PCE) was achieved for CdSNR/PANI-PEDOT:PSS device when it sensitized with ruthenium (II) (dye N-719) of 0.91% and a short circuit current density (Jsc) of 4.21 mA/cm2 in comparison with the other devices, which sensitized with natural dyes. The high performance of the CdSNR/PANI-PEDOT:PSS-N719 device attributed to the wide range of absorption and photostability for N719. This work shows that the CdSNR with N719 can be appropriate candidate for photovoltaics device for their low cost fabrication procedure and excellent absorption.

Heterogeneous Photocatalytic Degradation of Dyes in Water/Alcohol Solution Used by the Brazilian Agate Industry

The agate dyeing industry has been commonly seen as a high-pollution industry. Dyeing wastewater treatment is considered one of the most important categories for water-pollution control, because of its intense colour and the high concentration of organic contaminants. Most dyes used in the process present minimal biodegradability due to aromatic organic compounds in their structure. Using a photocatalytic reactor, experiments were carried out to study the decolorization of a water solution containing 8% ethylic alcohol and 200 mg L&#8722;1 of the dye Rhodamine B (RhB), the most difficult colorant to degrade among the used by the agate industry. The best conditions were further applied to treat the same agate water/ethyl alcohol solution containing a mixture of 200 mg L&#8722;1 of Rhodamine B (RhB), Crystal Violet (CV), Brilliant Green (BG), and Blood Red (BR). All the experiments were performed in a 2 L reactor equipped with ultraviolet (UV) lamps, at a wavelength of 365 nm, with powdered TiO2 or ZnO as the catalyst. The results indicated that the optimal decolorization conditions were attained with 2.5 g L&#8722;1 of the catalyst at pH 10 and an irradiation time of 80 min. The process resulted in complete degradation of CV, BG and 80% - 90% degradation of RhB and BR. The catalyst ZnO presented a performance somewhat better than TiO2. It is possible to conclude that the process of heterogeneous photocatalysis is effective for decolorization of water streams from the agate industry.

Comparison of degradation reactions of Acid Yellow 61 in both oxidation processes of H_2O_2/UV and O_3

The comparison of degradation of Acid Yellow 61 as a model dye compound in both oxidation processes of H 2O 2/UV and O 3 has been studied. When the decolorization rate of Acid Yellow 61 in both reactions presented similar, it was found there are some differences from the results of AOX removal and production of inorganic ions and organic acids. The results reveal that the H 2O 2/UV has beneficial effect on mineralization than O 3 only for degradation of Acid Yellow 61 solution and it is possible for enhancement of method efficiency by taking longer reaction time and addition of high concentration of oxidants.

Heterogeneous Degradation of Dyes in Industrial Effluent over Fenton-Like Nano-Fe₂O₃/Goldmine Complex

Nano-Fe2O3/goldmine complex was obtained by chemical coprecipitation reaction on the surface of goldmine waste-solid. Being used as the heterogeneous catalyst in Fenton-like advanced oxidation processes (AOPs), its treatment effect was studied in the removal performance of industrial dyes effluent. Although the maximal COD removal efficiency would reach 35.4% when 5 mL NaClO was added in 100 mL industrial dyes effluent, it is found that by using nano-Fe2O3/goldmine system, the COD removal efficiency of 13,000 mg/L dyes wastewater could reach up to 75.5% in the presence of 30 g/L nano-Fe2O3/goldmine complex and 50 mL/L NaClO at 50。C.

Eco-Friendly Production of Silver Nanoparticles from Peel of Tangerine for Degradation of Dye

Green chemistry methods for production of nanoparticles have many advantages, such as ease of use, which makes the methods desirable and economically viable. The aim of the present work was to green synthesise silver nanoparticles (SNPs) using aqueous tangerine peel extract in different ratios (2:1, 1:1, 1:2). The formed SNPs were characterised using ultraviolet-visible (UV-Vis) spectrophotometry, and transmission electron microscopy (TEM). The UV-Vis spectra showed that the highest absorbance was observed when the ratio of peel tangerine extract to silver nitrate solution was 1:2. The transmission electron micrographs showed the formation of poly dispersed nanoparticles. It was found that the average diameter of the nanoparticles was 30.29 ± 5.1 nm, 16.68 ± 5.7 nm, and 25.85 ± 8.4 nm, using a tangerine peel solution and silver nitrate solution ratio of 2:1, 1:1, and 1:2, respectively. The formed SNPs were evaluated as catalysts for methyl orange dye degradation, and the results confirmed that SNPs can speed up the degradation of the dye.

社会责任视角下的纺织印染工艺优化与实践

随着全球经济的快速发展,纺织印染行业作为资源密集型行业,面临着巨大的社会责任挑战。在环境污染、能源消耗、资源管理以及劳动力和社会福祉方面,纺织印染行业亟需寻找一种符合可持续发展原则,实现经济效益的优化途径。在社会责任视角下,优化纺织印染工艺,既要求技术创新,也要求在生产全过程中实施社会责任。这种纺织印染工艺的优化与实践可以为纺织印染行业提供一条实现环境可持续和社会责任兼顾的优化路径。

Study on the Shear Effect on Dye Patches Diffused in Wall-Bounded Shear Flow

This paper focuses on the high intensity filaments (dye patches) embedded in dye plumes in a wall-bounded shear flow, to investigate the shear effect on the dye patch distribution. Motivated by the widely concerned inverse estimation of the source location, we try extracting useful information to know the source location from down-stream dye patches. Accordingly, we changed the dye injection location at different distances from the wall and made observations at different downstream (diffusion) distances from the source. The orientation angle and roundness of dye patches were concerned to examine the shear effect and dye patch characteristics. To capture the dye plume images, a planar laser induced fluorescence (PLIF) technique was used. The orientation and roundness of each dye patch were calculated by least-square fitting. The statistics of both the orientation angle and the roundness were compared with those in homogeneous turbulent cases to reveal the shear effect. Different from uniformly-orientated dye patches in the homogeneous flow, larger occurrence probabilities with positive orientation angles of dye patches are observed in wall-bounded shear flow, in particular, when the injection location is near the wall. As with information extraction for the inverse estimation of source location, it is found that the orientation distribution of dye patches is independent of the diffusion distance, but related with the injection location from the wall. While for the homogeneous flow cases, a strong dependence on the diffusion distance is observed in the orientation distribution profiles. As for the roundness, similar aspects are found regarding the dependencies on the injection location in shear flow and on diffusion distance in homogeneous flow.

纺织品设计中扎染工艺的应用探究

扎染技艺是一门源于中国的传统手工染色技术,有着悠久的历史。扎染工艺通过各种扎结方法,创造出丰富多样的图案,其独特的艺术风格使得扎染产品具有很高的审美价值。文章探讨了扎染工艺在现代纺织品设计中的具体应用方式,通过现代科技与传统扎染工艺的深度结合,旨在提高产品的艺术价值、环保性和穿着体验,满足当代人对服饰的审美需求。