Low-frequency hybridized excess vibrations of two-dimensional glasses

One hallmark of glasses is the existence of excess vibrational modes at low frequenciesωbeyond Debye’s prediction.Numerous studies suggest that understanding low-frequency excess vibrations could help gain insight into the anomalous mechanical and thermodynamic properties of glasses.However,there is still intensive debate as to the frequency dependence of the population of low-frequency excess vibrations.In particular,excess modes could hybridize with phonon-like modes and the density of hybridized excess modes has been reported to follow D_(exc)(ω)~ω^(2)in 2D glasses with an inverse power law potential.Yet,the universality of the quadratic scaling remains unknown,since recent work suggested that interaction potentials could influence the scaling of the vibrational spectrum.Here,we extend the universality of the quadratic scaling for hybridized excess modes in 2D to glasses with potentials ranging from the purely repulsive soft-core interaction to the hard-core one with both repulsion and attraction as well as to glasses with significant differences in density or interparticle repulsion.Moreover,we observe that the number of hybridized excess modes exhibits a decrease in glasses with higher density or steeper interparticle repulsion,which is accompanied by a suppression of the strength of the sound attenuation.Our results indicate that the density bears some resemblance to the repulsive steepness of the interaction in influencing low-frequency properties.

Extraction of Acoustic Normal Mode Depth Functions Using Range-Difference Method with Vertical Linear Array Data

Data-derived normal mode extraction is an effective method for extracting normal mode depth functions in the absence of marine environmental data.However,when the corresponding singular vectors become nonunique when two or more singular values obtained from the cross-spectral density matrix diagonalization are nearly equal,this results in unsatisfactory extraction outcomes for the normal mode depth functions.To address this issue,we introduced in this paper a range-difference singular value decomposition method for the extraction of normal mode depth functions.We performed the mode extraction by conducting singular value decomposition on the individual frequency components of the signal's cross-spectral density matrix.This was achieved by using pressure and its range-difference matrices constructed from vertical line array data.The proposed method was validated using simulated data.In addition,modes were successfully extracted from ambient noise.

Sliding modes of fault activation under constant normal stiffness conditions

Fault activation has been the focus of research community for years.However,the studies of fault activation remain immature,such as the fault activation mode and its major factors under constant normal stiffness(CNS)conditions associated with large thickness of fault surrounding rock mass.In this study,the rock friction experiments were conducted to understand the fault activation modes under the CNS conditions.Two major parameters,i.e.the initial normal stress and loading rate,were considered and calibrated in the tests.To reveal the response mechanism of fault activation,the local strains near the fault plane were recorded,and the macroscopic stresses and displacements were analyzed.The testing results show that the effect of displacement-controlled loading rate is more pronounced under the CNS conditions than that under constant normal load(CNL)conditions.Both the normal and shear stresses drop suddenly when the stick-slip occurs.The decrease and increase of the normal stress are synchronous with the shear stress in the regular stick-slip scenario,but mismatch with the shear stress during the chaotic stick-slip process.The results are helpful for understanding the fault sliding mode and the prediction and prevention of fault slip.

Mode-I crack in a two-dimensional fibre-reinforced generalized thermoelastic problem

A general model of the equations of the Lord-Sulman theory including one relaxation time and the Green-Lindsay theory with two relaxation times, as well as the classical dynamical coupled theory, are applied to the study of the influence of reinforcement on the total deformation for an infinite space weakened by a finite linear opening mode- I crack. We study the influence of reinforcement on the total deformation of rotating thermoelastic half-space and their interaction with each other. The material is homogeneous isotropic elastic half space. The crack is subjected to prescribed temperature and stress distributions. The normal mode analysis is used to obtain the exact expressions for displacement components, force stresses, and temperature. The variations of the considered variables with the horizontal distance are illustrated graphically. Comparisons are made with the results obtained in the three theories with and without rotation. A comparison is also made between the two theories for different depths.

Topological Phonon Modes in a Two-Dimensional Wigner Crystal

We investigate the spin-orbit coupling effect in a two-dimensional （2D） Wigner crystal. It is shown that sufficiently strong spin-orbit coupling and an appropriate sign of g-factor could transform the Wigner crystal to a topological phonon system. We demonstrate the existence of chiral phonon edge modes in finite size samples, as well as the robustness of the modes in the topological phase. We explore the possibility of realizing the topological phonon system in 2D Wigner crystals confined in semiconductor quantum wells/heterostructure. It is found that the spin-orbit coupling is too weak for driving a topological phase transition in these systems. It is argued that one may look for topological phonon systems in correlated Wigner crystals with emergent effective spin-orbit coupling.

A MODE Ⅱ CRACK IN A TWO-DIMENSIONAL OCTAGONAL QUASICRYSTALS

The present study develops the fracture theory for a two-dimensional octagonal quasicrystals. The exact analytic solution of a Mode Ⅱ Griffith crack in the material was obtained by using the Fourier transform and dual integral equations theory, then the displacement and stress fields, stress intensity factor and strain energy release rate were determined, the physical sense of the results relative to phason and the difference between mechanical behaviors of the crack problem in crystal and quasicrystal were figured out. These provide important information for studying the deformation and fracture of the new solid phase.

A NEW MOMENT METHOD FOR THE FAST AND ACCURATE ANALYSIS OF NORMAL MODE HELICAL ANTENNAS

In this letter, a new moment method using helical segments is presented to model Normal Mode Helical Antenna (NMHA). Using this method, the NMHA can be modeled by a few segments. The current distributions and radiation patterns of some NMHAs are calculated.A comparison is made between results obtained using this helical segment algorithm and a linear segment algorithm, and the results of the two algorithms agree fairly well. When calculating the impedance matrix [Z], all the elements of the matrix can be obtained by only calculating a few elements with the application of the symmetric and periodic characteristics of the NMHA.Therefore, the CPU time and the memory storage are significantly reduced, with the accuracy and speed enhanced.

SINGULAR ANALYSIS OF BIFURCATION OF NONLINEAR NORMAL MODES FOR A CLASS OF SYSTEMS WITH DUAL INTERNAL RESONANCES

The nonlinear normal modes (NNMs) associated with integrnal resonance can be classified into two kinds: uncoupled and coupled. The bifurcation problem of the coupled NNM of system with 1 : 2 : 5 dual internal resonance is in two variables. The singular analysis of it is presented after separating the two variables by taking advantage of Maple algebra, and some new bifurcation patterns are found. Different from the NNMs of systems with single internal resonance, the number of the NNMs of systems with dual internal resonance may be more or less than the number of the degrees of freedom. At last, it is pointed out that bifurcation problems in two variables can be conveniently solved by separating variables as well as using coupling equations.

Normal Mode Analysis on Three Different Structures of a Duplex DNA d(CGCGAATTCGCG)

ＩｎｔｒｏｄｕｃｔｉｏｎＣｏｍｐｕｔｅｒｓｉｍｕｌａｔｉｏｎａｐｐｒｏａｃｈｅｓｈａｖｅｂｅｅｎｐｒｏｖｅｄｔｏｂｅｐｏｗｅｒｆｕｌｔｏｏｌｓｔｏｄｅｔｅｒｍｉｎｅａｎｄｃｈａｒａｃｔｅｒｉｚｅｄｙｎａｍｉｃｓｏｆｐｒｏｔｅｉｎｓａｎｄｎｕｃｌｅｉｃ...

Phonon Confinement Effect in Two-dimensional Nanocrystallites of Monolayer MoS_2 to Probe Phonon Dispersion Trends Away from Brillouin-Zone Center

The fundamental momentum conservation requirement q - 0 for the Raman process is relaxed in the nanocrystal- lites （NCs）, and phonons away from the Brillouin-zone center will be involved in the Raman scattering, which is well-known as the phonon confinement effect in NCs. This usually gives a downshift and asymmetric broadening of the Raman peak in various NCs. Recently, the A1 mode of 1L MoS2 NCs is found to exhibit a blue shift and asymmetric broadening toward the high-frequency side [Chem. Soc. Rev. 44 （2015） 2757 and Phys. Rev. B 91 （2015） 195411]. In this work, we carefully check this issue by studying Raman spectra of lL MoS2 NCs prepared by the ion implantation technique in a wide range of ion-implanted dosage. The same confinement coefficient is used for both E＇ and A＇1 modes in 1L MoS2 NCs since the phonon uncertainty in an NC is mainly determined by its domain size. The asymmetrical broadening near the A＇1 and E＇ modes is attributed to the appearance of defect-activated phonons at the zone edge and the intrinsic asymmetrical broadening of the two modes, where the anisotropy of phonon dispersion curves along Г-K and Г- M is also considered. The photoluminescence spectra confirm the formation of small domain size of 1L MoS2 nanocrystallites in the ion-implanted 1L MoS2. This study provides not only an approach to quickly probe phonon dispersion trends of 2D materials away from Г by the Raman scattering of the corresponding NCs, but also a reference to completely understand the confinement effect of different modes in various nanomaterials.

An Efficient Three-Dimensional Coupled Normal Mode Model and Its Application to Internal Solitary Wave Problems

We present an efficient three-dimensional coupled-mode model based on the Fourier synthesis technique. In principle, this model is a one-way model, and hence provides satisfactory accuracy for problems where the forward scattering dominates. At the same time, this model provides an efficiency gain of an order of magnitude or more over two-way coupled-mode models. This model can be applied to three-dimensional range-dependent problems with a slowly varying bathymetry or internal waves. A numerical example of the latter is demonstrated in this work. Comparisons of both accuracy and efficiency between the present model and a benchmark model are also provided.

Finite-Time Normal Mode Disturbances and Error Growth During Southern Hemisphere Blocking

The structural organization of initially random errors evolving in abarotropic tangent linear model, with time-dependent basic states taken from analyses, is examinedfor cases of block development, maturation and decay in the Southern Hemisphere atmosphere duringApril, November, and December 1989. The statistics of 100 evolved errors are studied for six-dayperiods and compared with the growth and structures of fast growing normal modes and finite-timenormal modes (FTNMs). The amplification factors of most initially random errors are slightly lessthan those of the fastest growing FTNM for the same time interval. During their evolution, thestandard deviations of the error fields become concentrated in the regions of rapid dynamicaldevelopment, particularly associated with developing and decaying blocks. We have calculatedprobability distributions and the mean and standard deviations of pattern correlations between eachof the 100 evolved error fields and the five fastest growing FTNMs for the same time interval. Themean of the largest pattern correlation, taken over the five fastest growing FTNMs, increases withincreasing time interval to a value close to 0.6 or larger after six days. FTNM 1 generally, but notalways, gives the largest mean pattern correlation with error fields. Corresponding patterncorrelations with the fast growing normal modes of the instantaneous basic state flow aresignificant' but lower than with FTNMs. Mean pattern correlations with fast growing FTNMs increasefurther when the time interval is increased beyond six days.

SINGULAR CHARACTERISTICS OF NONLINEAR NORMAL MODES IN A TWO DEGREES OF FREEDOM ASYMMETRIC SYSTEMS WITH CUBIC NONLINEARITIES

Nonlinear normal modes in a two degrees of freedom asymmetric system with cubic nonlinearities as singularity occurs in the system are studied, based on the invariant space in nonlinear normal modes and perturbation technique. Emphasis is placed on singular characteristics as the linear coupling between subsystems degenerated. For nonresonances, it is analytically presented that a single-mode motion and localization of vibrations occur in the system, and the degree of localization relates not only to the coupling stiffness between oscillators, but also to the asymmetric parameter. The parametric threshold value of localization is analytically given. For 1 : 1 resonance, there exist bifurcations of normal modes with nonlinearly coupling stiffness and asymmetric parameter varying. The bifurcating set on the parameter and bifurcating curves of normal modes are obtained.

Discussion on Social Governance Mode under New Normal Concept

"New Normal"is the basic transition modality existing in the Chinese society to the historical development stage and the new normal mode has special pattern of manifestation in political,economic,cultural,social,legal and military fields.Recognizing,adapting to and leading new normal should become the basic content in the work of the party and the country in the coming period.

A theoretical and experimental study on all-normal-dispersion Yb-doped mode-locked fiber lasers

We report on a theoretical and experimental study of an all-normal-dispersion （ANDi） Yb-doped mode-locked fiber laser, in which nonlinear polarization rotation （NPR） is used to realize mode-locking without any dispersion compensation. Based on the coupled nonlinear Schr6dinger （CNLS） equation, a model simulating the mode-locked process of an all-normal-dispersion ring fiber laser is developed, which shows that the achievement of stable mode-locking depends on the alignment of the polarization controller （PC） along the fast-polarization axis of the fiber, the birefringence intensity, and the net cavity dispersion. According to the theoretical analysis, stable mode-locked pulses with pulse duration 300 ps and average output power 33.9 mW at repetition rate 36 MHz are obtained.

Normal mode splitting and ground state cooling in a Fabry-Perot optical cavity and transmission line resonator

Optomechanical dynamics in two systems which are a transmission line resonator and Fabrya-Perot optical cavity via radiation-pressure are investigated by linearized quantum Langevin equation. We work in the resolved sideband regime where the oscillator resonance frequency exceeds the cavity linewidth. Normal mode splittings of the mechanical resonator as a pure result of the coupling interaction in the two optomechanical systems is studied, and we make a comparison of normal mode splitting of mechanical resonator between the two systems. In the optical cavity, the normal mode splitting of the movable mirror approaches the latest experiment very well. In addition, an approximation scheme is introduced to demonstrate the ground state cooling, and we make a comparison of cooling between the two systems dominated by two key factors, which are the initial bath temperature and the mechanical quality factor. Since both the normal mode splitting and cooling require working in the resolved sideband regime, whether the normal mode splitting influences the cooling of the mirror is considered. Considering the size of the mechanical resonator and precooling the system, the mechanical resonator in the transmission line resonator system is easier to achieve the ground state cooling than in optical cavity.

Numerical solutions of rotational normal modes of a triaxial two-layered anelastic Earth

The Earth's rotational normal modes depend on Earth model used, including the layer structures,principal inertia moments of different layers and the compliances. This study focuses on providing numerical solution of the rotational normal modes of a triaxial two-layered anelastic Earth model without external forces but with considering the complex forms of compliances and the electromagnetic coupling between the core and mantle. Based on the present knowledge of the Chandler wobble(CW) and Free Core Nutation(FCN), we provide a set of complete compliances which could be used for reference in further investigations. There are eight rotational normal mode solutions, four of which might exist in nature. However, in reality only two of these four solutions correspond to the present motion status of the prograde CW and the retrograde FCN. On one hand, our numerical calculations show that the periods and quality factors(Qs) of CW and FCN are respectively 434.90 and 429.86 mean solar days(d) and 76.56 and 23988.47 under frequency-dependent assumption, and the triaxiality prolongs CW about 0.01 d and has hardly effect on FCN. On the other hand, we analyze the sensibility of compliances and electromagnetic coupling parameter on the periods and Qs of CW and FCN and find the sensitive parameters with respect to them.

Theory and Simulation Analysis of the Mode Shape and Normal Shape Actuators and Sensors

In this paper, we will try to find a universal theoretical model and approximate solutions which can be applied to both mode shape and normal shape actuators and sensors, and which can be predicted the gain of the first three modes of the mode shape and normal shape actuators and sensors, finally through computer simulation analysis to validate. In order to prove the feasibility of the theory and as well as convenient to use on the electro-mechanical engineering, we will try to simplify the three-dimension structure problem into an one-dimension structure problem. Furthermore we will design one kind of bimorph type piezoelectric cantilever beam, so that it can be used as with the actuator and sensor simultaneously, but also conducive to the theory and simulation analysis. As for the simulation analysis, we will use the ANSYS code.

New formulas for normalizing photon-added(-subtracted) two-mode squeezed thermal states

For the first time,we derive the compact forms of normalization factors for photon-added（-subtracted） two-mode squeezed thermal states by using the P-representation and the integration within an ordered product of operators（IWOP） technique.It is found that these two factors are related to the Jacobi polynomials.In addition,some new relationships for Jacobi polynomials are presented.

A Very Compact Normal Mode Multiloop Helical Antenna with Enhanced Bandwidth

The physical size of an antenna becomes an important characteristic when receiving signals in bands with long wavelengths. Size determines two important aspects of antenna performance;impedance and efficiency. For example, the VHF antennas installed on radio sets that intended to receive FM or the latest technology Digital Audio Broadcasting (DAB) radio signals in Bands II, III respectively. Antennas that are installed on mobile platforms (i.e. portable receivers) require a receiver that utilizes a whip telescopic antenna with adjustable length which can operate as a λ/4 monopole antenna. Whereas, non-portable applications like a deck commercial receiver has no built in antenna due to the large size of the radiator needed and so must be connected with an external antenna. This paper presents a new design of a very small size Normal Mode Multiloop Helical Antenna (NMMHA) with superior performance developed for commercial receivers operate in band II, III. The major drawback which has been overcome with this design is the very narrow bandwidth of the Normal Mode Helical Antenna, which originally was optimized to provide the minimum Voltage Standing Wave Ratio VSWR response across Band II (87.5 - 108 MHz). The NMMHA’s size allows it to be a build in block of a deck commercial receiver.