Numerical Prediction Methods for Clock Deviation Based on Two-Way Satellite Time and Frequency Transfer Data

Three functional models, polynomial, spectral analysis, and modified AR model, are studied and compared in fitting and predicting clock deviation based on the data sequence derived from two-way satellite time and frequency transfer. A robust equivalent weight is applied, which controls the significant influence of outlying observations. Some conclusions show that the prediction precision of robust estimation is better than that of LS. The prediction precision calculated from smoothed observations is higher than that calculated from sampling observations. As a count of the obvious period variations in the clock deviation sequence, the predicted values of polynomial model are implausible. The prediction precision of spectral analysis model is very low, but the principal periods can be determined. The prediction RMS of 6-hour extrapolation interval is Ins or so, when modified AR model is used.

High-precision two-way time transfer system via long-distance commercial fiber link

Time synchronization techniques, especially on the pulse per second(PPS) temporal basis, have attracted growing research interests in recent years. In this paper, we have proposed and experimentally demonstrated a high-precision two-way time transfer(TWTT) system to realize long-distance dissemination of 1 PPS signal generated by a hydrogen maser. A dense-wavelength-division-multiplexing(DWDM) system and bi-directional erbium-doped fiber amplifiers(Bi-EDFAs) have also been adopted to suppress the impact of Rayleigh backscattering and optimize the signal to noise ratio(SNR) as well. We have theoretically analyzed the systematic delay in detail. The ultimate root mean square(RMS) variation of time synchronization accuracy is sub-26 ps and the time deviation can be reduced to as low as 1.2 ps at 100 s and 0.253 ps at 12 000 s, respectively.

Exfoliation corrosion behavior of 7050-T6 aluminum alloy treated with various quench transfer time

The exfoliation corrosion （EFC） behavior of 7050-T6 aluminum alloy treated with various quench transfer time after solution heat treatment was investigated by standard EFC immersion tests, strength loss measurements after EFC tests and electrochemical impedance spectroscope （EIS） technique. The results showed that EFC resistance of the alloy decreased with increasing quench transfer time. Backscattered electron scanning electron microscope （SEM） together with transmission electron microscope （TEM） observations revealed that the coverage ratio and microstructure of precipitates at grain boundary area are the most important factors which influence the EFC susceptibility of the alloy, while precipitate-free zone （PFZ） near grain boundary has no or only a minor effect on it. In addition, galvanostatic measurements of the alloy present a good correlation between EFC resistance and transients in potential. The cumulated number of transients in potential can be used to evaluate EFC resistance of the alloy.

Effects of in Vitro Maturation Time of Oocytes on Sheep Nuclear Transfer Efficiency

[Objective] The study aimed to provide references for the time of oocyte maturation in vitro and enucleation in the course of sheep nuclear transfer(NT).[Method] Compared the effects of different maturation time of oocytes on enucleation efficiency and reconstructed embryo development by means of blind enucleation and fluorescence microscopy.[Result] Treatment of IVM(in vitro maturation)19-21 h was significantly higher than IVM 16-18 h treatment in oocyte maturation rate(P<0.05)and was significantly higher than IVM 22-24 h treatment in enucleation rate(P<0.05).Three treatments had no significant difference in cleavage rate and blastocyst rate(P>0.05),but IVM 19-21 h treatment was significantly higher than the other 2 treatments in average cell number of blastocysts(P<0.05).[Conclusion] The appropriate in vitro maturation time of oocytes was 19-21 h for sheep nuclear transfer,which could significantly improve the quality of blastocysts according to the cell number per blastocyst(P<0.05).

HEURISTIC STUDY OF FLOWSHOP SCHEDULING TO MINIMIZE MEAN FLOW TIME WITH LOT TRANSFER CONSIDERED

Lot scheduling problem with idle time transfer between processes to minimize mean flow time is very important because to minimize mean flow time is to minimize work in process. But the problem is NP hard and no polynomial algorithm exists to guarantee optimal solution. Based the analysis the mathematical structure of the problem, the paper presents a new heuristic algorithm. Computer simulation shows that the proposed heuristic algorithm performs well in terms of both quality of solution and execution speed.

Discrete time transfer matrix method for dynamics of multibody system with flexible beams moving in space

In this paper, by defining new state vectors and developing new transfer matrices of various elements mov- ing in space, the discrete time transfer matrix method of multi-rigid-flexible-body system is expanded to study the dynamics of multibody system with flexible beams moving in space. Formulations and numerical example of a rigid- flexible-body three pendulums system moving in space are given to validate the method. Using the new method to study the dynamics of multi-rigid-flexible-body system mov- ing in space, the global dynamics equations of system are not needed, the orders of involved matrices of the system are very low and the computational speed is high, irrespec- tive of the size of the system. The new method is simple, straightforward, practical, and provides a powerful tool for multi-rigid-flexible-body system dynamics.

Time Optimization of Multiple Knowledge Transfers in the Big Data Environment

In the big data environment, enterprises must constantly assimilate big dataknowledge and private knowledge by multiple knowledge transfers to maintain theircompetitive advantage. The optimal time of knowledge transfer is one of the mostimportant aspects to improve knowledge transfer efficiency. Based on the analysis of thecomplex characteristics of knowledge transfer in the big data environment, multipleknowledge transfers can be divided into two categories. One is the simultaneous transferof various types of knowledge, and the other one is multiple knowledge transfers atdifferent time points. Taking into consideration the influential factors, such as theknowledge type, knowledge structure, knowledge absorptive capacity, knowledge updaterate, discount rate, market share, profit contributions of each type of knowledge, transfercosts, product life cycle and so on, time optimization models of multiple knowledgetransfers in the big data environment are presented by maximizing the total discountedexpected profits (DEPs) of an enterprise. Some simulation experiments have beenperformed to verify the validity of the models, and the models can help enterprisesdetermine the optimal time of multiple knowledge transfer in the big data environment.

Influence of quench transfer time on microstructure and mechanical properties of 7055 aluminum alloy

The influence of quench transfer time on the microstructure and mechanical properties of 7055 aluminum alloy with and without zirconium was investigated by tensile properties test,optical microscopy,scanning electron microscopy and transmission electron microscopy.For the Zr-free alloy,the strength increases to the highest value at 20 s with transfer time,and then decreases slightly.The elongation decreases slowly with transfer time within 20 s,and more rapidly after 20 s.For the Zr-containing alloy,prolonging transfer time within 20 s results in slight decrease in the strength and elongation,and rapid drop of which is observed after 20 s.For the Zr-free alloy,prolonging transfer time can increase the percentage of intergranular fracture,which is mainly caused by wide grain boundary precipitate free zone.The failure mode of the Zr-containing alloy is modified from the predominant transgranular void growth and intergranular fracture to transgranular shear and intergranular fracture with increase in the transfer time,which is attributed to the wider grain boundary precipitate free zone and coarse equilibrium η phases in the matrix.

Joint transfer of time and frequency signals and multi-point synchronization via fiber network

A system of jointly transferring time signals with a rate of 1 pulse per second （PPS） and frequency signals of 10 MHz via a dense wavelength division multiplex-based （DWDM） fiber is demonstrated in this paper. The noises of the fiber links are suppressed and compensated for by a controlled fiber delay line. A method of calibrating and characterizing time is described. The 1PPS is synchronized by feed-forward calibrating the fiber delays precisely. The system is experimen- tally examined via a 110 km spooled fiber in laboratory. The frequency stabilities of the user end with compensation are 1.8x 10-14 at 1 s and 2.0x 10-17 at 104 s average time. The calculated uncertainty of time synchronization is 13.1 ps, whereas the direct measurement of the uncertainty is 12 ps. Next, the frequency and 1PPS are transferred via a metropoli- tan area optical fiber network from one central site to two remote sites with distances of 14 km and 110 km. The frequency stabilities of 14 km link reach 3.0x 10-14 averaged in 1 s and 1.4x 10-17 in 104 s respectively; and the stabilities of 110 km link are 8.3 x 10-14 and 1.7 x 10-17, respectively. The accuracies of synchronization are estimated to be 12.3 ps for the 14 km link and 13.1 ps for the 110 km link, respectively.

Data Transfer Over the Internet for Real Time Applications

Efficient real time data exchange over the Internet plays a crucial role in the successful application of web-based systems. In this paper, a data transfer mechanism over the Internet is proposed for real time web based applications. The mechanism incorporates the eXtensible Markup Language （XML） and Hierarchical Data Format （HDF） to provide a flexible and efficient data format. Heterogeneous transfer data is classified into light and heavy data, which are stored using XML and HDF respectively; the HDF data format is then mapped to Java Document Object Model （JDOM） objects in XML in the Java environment. These JDOM data objects are sent across computer networks with the support of the Java Remote Method Invocation （RMI） data transfer infrastructure. Client＇s defined data priority levels are implemented in RMI, which guides a server to transfer data objects at different priorities. A remote monitoring system for an industrial reactor process simulator is used as a case study to illustrate the proposed data transfer mechanism.

Application of Geodetic Receivers to Timing and Time Transfer

Two methods for smoothing pseudorange observable by Carrier and Doppler are discussed. Then the procedure based on the RINEX observation files is tested using the Ashtech Z-XII3T geodetic receivers driven by a stable external frequency at UNSO. This paper proposes to adapt this procedure for the links between geodetic receivers, in order to take advantage of the P codes available on L 1 and L 2. This new procedure uses the 30-second RINEX observations files, the standard of the International GPS Service (IGS), and processes the ionosphere-free combination of the codes P 1 and P 2; the satellite positions are deduced from the IGS rapid orbits, available after two days.

Inter-hospital transfers and door-to-balloon times for STEMI: a single centre cohort study

Background Key performance indices such as door-to-balloon times have long been recognized as quality metrics in reducing time to care for patients with acute coronary syndromes(ACS). In the situation where patients do not present to a facility capable of 24/7 percutaneous coronary interventions(PCI) delays in time to therapy can exceed the recommendation of 90 min or less. This study aimed to evaluate the impact of transfers on performance indices for patients diagnosed with ST-segment elevation myocardial infarction(STEMI). Methods Over a seven month collection period, all patients presenting with symptoms suggestive of ACS and admitted for PCI were studied. Patients were divided into dichotomous groups of direct presentations or transfers from a secondary non-PCI capable hospital with key times recorded, including symptom-onset, first hospital and PCI-capable hospital arrival and balloon inflation times to evaluate time of treatment for STEMI patients. Results Of the 87 patients diagnosed with STEMI, transferred patients experienced statistically significant delays in symptom-onset to the PCI-capable hospital(PCI-H) arrival(215 vs. 95 min, P < 0.001), symptom-onset to balloon inflation(225 vs. 160 min, P = 0.009) and first hospital arrival to balloon inflation times(106 vs. 56 min, P < 0.001). Only 28%(n = 9) of transferred patients underwent balloon inflation within 90 min from first hospital arrival, while 60%(n = 19) did within 120 min, although all received balloon inflation within 90 min from arrival at the PCI-H. After controlling for confounding factors of socio-economic status, presentation date/time and diagnostic category, transferred patients experienced an average 162% longer delays from symptom-onset to PCI-H door arrival, and 98% longer delays in symptom-onset to balloon inflation;compared to patients who present directly to the PCI-H. No statistically significant differences were noted between transferred and direct patients when measured from PCI-H door-to-balloon times. Conclusions This study shows that transferred patients experience a greater overall system delay, compared to patients who present directly for PCI, significantly increasing their time to treatment and therefore infarct times. Despite the majority of transfers experiencing pre-hospital activation, their treatment hospital arrival to balloon times are no less than direct presenters after controlling for confounding factors, further compounding the overall delay to therapy.

New research trends on high-precision time transfer technology

High-precision time transfer plays an important role in the areas of fundamental research and applications. Accompanying w ith the remarkable improvements in the ability of generating and measuring high-accuracy time-frequency signal,seeking for new time-transfer techniques betw een distant clocks w ith much further improved accuracy attracts attentions w orld-w idely. The time-transfer technique based on optical pulses has the highest precision presently,and the further improvement in the accuracy is heavily dependent on the time-domain properties of the pulse as w ell as the sensitivity of the applied measurement on the exchanged pulse. The application of optical frequency comb in time transfer for a precision up to femtosecond level are currently the focus of much interest,and has recently achieved many breakthroughs. Further investigations show that,utilizing quantum techniques,i.e. quantum measurement technique and quantum optical pulse source,can lead to a new limit on the measured timing information. Furthermore,it can be immune from atmospheric parameters,such as pressure,temperature,humidity and so on.Such quantum improvements on time-transfer have a bright prospect in the future applications requiring extremely high-accuracy timing and ranging. The potential achievements w ill form a technical basis for the future realization of sub-femtosecond time transfer system.

Technology of shipboard two-way microwave time synchronization

For the high precision time synchronization demand of ships, advantages and disadvantages of the present time transfer methods are analyzed, the two-way microwave time transfer （TWMTT） method is adopted to resolve the time synchronization problem in the Naval Ship Formation. After expounding the principle and system composition of TWMTT method, the various factors influencing the synchronous precision are analyzed, such as time-interval measurement error, TWMTT equipment delay error, signal propagation error in air, and signal delay error caused by shipping. To improve the time synchronization precision, all the error sources above are deduced with mathematical measures to definite the critical one, and the signal processing measures such as Pseudo code spread spectrum time comparison signal generation technology, FFT fast acquisition technology and precise tracking technology are used into the modem which is the core equipment of the TWMTT. And, calibration method of TWMTT equipment delay are developed. Through theoretical a- nalysis and simulation verification, the precision of shipboard two-way microwave time synchroniza- tion can reach 1 ns.

SOLVING 2-D NONLINEAR COUPLED HEAT AND MOISTURE TRANSFER PROBLEMS VIA A SELF-ADAPTIVE PRECISE ALGORITHM IN TIME DOMAIN

A self-adaptive precise algorithm in the time domain was employed to solve 2-D nonlinear coupled heat and moisture transfer problems. By expanding variables at a discretized time interval, the variations of variables can be described more precisely,and a nonlinear coupled initial and boundary value problem was converted into a series of recurrent linear boundary value problems which are solved by FE technique. In the computation, no additional assumption and the nonlinear iteration are required, and a criterion for self-adaptive computation is proposed to maintain sufficient computing accuracy for the change sizes of time steps. In the numerical comparison, the variations of material properties with temperature, moisture content, and both temperature and moisture content are taken into account, respectively. Satisfactory results have been obtained, indicating that the proposed approach is capable of dealing with complex nonlinear problems.

Effect of different fertilization time after human chorionic gonadotropin injection on fertilization outcome of patients in vitro fertilizationembryo transfer

Objective:To explore the effect of different fertilization time after human chorionic gonadotropin(HCG)injection on the outcome of fertilization in vitro fertilization-embryo transfer(IVF-ET).Methods:One thousand one hundred and forty IVF-ET cycles from January 2016 to August 2018 were analyzed retrospectively.According to the different fertilization time after injection of HCG divided into four groups:Group A(38.0 h~39.0 h),Group B(39.1 h~40.0 h),Group C(40.1 h~41.0 h),and Group D(41.1 h~42.0 h).The normal fertilization rate,the normal cleavage rate,the embryo utilization rate,the high-quality embryo rate,the clinical pregnancy rate,the implantation rate,and the spontaneous abortion rate were analyzed among the groups.Then we investigated the effect of different promotion methods on the outcome of fertilization during the optimal fertilization time.Results:There was no significant difference in 2PN cleavage rate,available embryo rate,clinical pregnancy rate,implantation rate and abortion rate among the four groups(P>0.05).The high-quality embryo rate in Group D(44.6%)was the highest,and was significantly different among the four groups(P<0.05).The normal fertilization rate in Group D(71.6%)was the highest,and was significantly different among the four groups(P<0.05).The normal fertilization rate(78.1%)of antagonist group was significantly higher than other groups(P<0.05).Conclusion:The different fertilization time after HCG injection have effects on high-quality embryo rate and normal fertilization rate of patients in IVF-ET.The appropriate fertilization time of patients in IVF-ET was 41 h~42 h after HCG injection in our reproductive center,improved the clinical pregnancy rate and reduced the early abortion rate.The GnRH-ant protocol is superior to other protocol in IVF-ET.

Pearson correlation and transfer entropy in the Chinese stock market with time delay

Correlations between two time series,including the linear Pearson correlation and the nonlinear transfer entropy,have attracted significant attention.In this work,we studied the correlations between multiple stock data with the introduction of a time delay and a rolling window.In most cases,the Pearson correlation and transfer entropy share the same tendency,where a higher correlation provides more information for predicting future trends from one stock to another,but a lower correlation provides less.Considering the computational complexity of the transfer entropy and the simplicity of the Pearson correlation,using the linear correlation with time delays and a rolling window is a robust and simple method to quantify the mutual information between stocks.Predictions made by the long short-term memory method with mutual information outperform those made only with selfinformation when there are high correlations between two stocks.

Relocation moveson——It’s time for China’s textile industry to transfer

History proves that some countries and regions benefited from international industry transfer, because of international industrial transfer can stimulate their economic growth.Thanks to the manufacturing transfer implemented by EU, USA, Japan and some Asian developed countries in 1980s, China’s economic situation has boomed over 30 years. Textile industry as a traditional industry in China has its own competitive advantage. It can be confirmed that textile industry will play an important role during the fourth Industry transfer period. So, who will be the winner this time?

应用Time-lapse优选胚胎观察胚胎发育速度对单胚胎移植妊娠结局的影响

目的应用时差成像系统(Time-Lapse Imaging,TLI)基于分层筛选模型优选胚胎行Day3单胚胎移植,探讨移植胚胎发育速度对妊娠结局的影响。方法选取2014年4月至2017年5月在南京鼓楼医院生殖中心行Day3单分裂胚胎移植的234例患者的胚胎进行动态观察,对符合挑选参数的移植胚胎进一步分析,根据细胞发育速度分为8~9细胞组(n=168)、10~11细胞组(n=36)、12~16细胞组(n=30)三组;根据移植胚胎的卵裂球数目奇偶数分为奇数组(n=52)和偶数组(n=182)两组;将卵裂球数目为偶数的胚胎根据其胚胎发育速度分为8细胞组(n=137)、10细胞组(n=22)、12~16细胞组(n=23)三组。回顾性分析胚胎的发育速度对妊娠结局的影响。结果8~9细胞组、10~11细胞组、12~16细胞组三组的种植率依次是61.90%、53.80%和53.33%,活产率依次是58.33%、50.00%和50.00%,流产率分别为5.76%,5.26%和6.25%,各项数据均无统计学差异(P>0.05)。奇数组与偶数组相比,种植率(38.46%vs.65.38%)、流产率(10.00%vs.5.04%)、活产率(34.62%vs.62.08%)三个方面均较差,且在种植率与活产率方面具有显著性差异(P<0.05)。移植胚胎卵裂球数目为偶数的胚胎中,8细胞组、10细胞组、12~16细胞组在种植率、流产率、活产率方面均无统计学差异(P>0.05)。结论通过Time-lapse挑选发育速度较快的胚胎移植仍可获得较好的妊娠结局,此结果为移植当日无正常发育速度胚胎患者的胚胎选择提供了新思路。

Changing the balance of the MTO reaction dual-cycle mechanism: Reactions over ZSM-5 with varying contact times

The methanol to olefins （MTO） reaction was performed over ZSM‐5 zeolite at 300℃ under various methanol weight hourly space velocity （WHSV） values. During these trials, the catalytic perfor‐mance was assessed, in addition to the formation and function of organic compounds retained in the zeolite. Analysis of reaction effluents and confined organics demonstrated a dual‐cycle reaction mechanism when employing ZSM‐5. The extent of the hydrogen transfer reaction, a secondary reac‐tion in the MTO process, varied as the catalyst‐methanol contact time was changed. In addition, 12C/13C‐methanol switch experiments indicated a relationship between the dual‐cycle mechanism and the extent of the hydrogen transfer reaction. Reactions employing a low methanol WHSV in conjunction with a long contact time favored the hydrogen transfer reaction to give alkene products and promoted the generation and accumulation of retained organic species, such as aromatics and methylcyclopentadienes, which enhance the aromatic cycle. When using higher WHSV values, the reduced contact times lessened the extent of the hydrogen transfer reaction and limited the genera‐tion of methylcyclopentadienes and aromatic species. This suppressed the aromatic cycle, such that the alkene cycle became the dominant route during the MTO reaction.