Recent advances in battery energy storage technologies enable increasing number of photovoltaic-battery energy storage systems(PV-BESS)to be deployed and connected with current power grids.The reliable and efficient u...Recent advances in battery energy storage technologies enable increasing number of photovoltaic-battery energy storage systems(PV-BESS)to be deployed and connected with current power grids.The reliable and efficient utilization of BESS imposes an obvious technical challenge which needs to be urgently addressed.In this paper,the optimal operation of PV-BESS based power plant is investigated.The operational scenarios are firstly partitioned using a self-organizing map(SOM)clustering based approach.The revenue optimization model is adopted for the PV-BESS power plants to determine the optimal operational modes under typical conditions for a set of considerations,e.g.power generation revenue,assessing rewards/penalties as well as peak shaving/valley filling revenue.The solution is evaluated through a set of case studies,and the numerical result demonstrates the effectiveness of the suggested solution can optimally operate the BESS with the maximal revenue.展开更多
In recent times,the impact of typhoon disasters on integrated energy active distribution networks(IEADNs)has received increasing attention,particularly,in terms of effective cascading fault path prediction and enhance...In recent times,the impact of typhoon disasters on integrated energy active distribution networks(IEADNs)has received increasing attention,particularly,in terms of effective cascading fault path prediction and enhanced fault recovery performance.In this study,we propose a modified ORNL-PSerc-Alaska(OPA)model based on optimal power flow(OPF)calculation to forecast IEADN cascading fault paths.We first established the topology and operational model of the IEADNs,and the typical fault scenario was chosen according to the component fault probability and information entropy.The modified OPA model consisted of two layers:An upper-layer model to determine the cascading fault location and a lower-layer model to calculate the OPF by using Yalmip and CPLEX and provide the data to update the upper-layer model.The approach was validated via the modified IEEE 33-node distribution system and two real IEADNs.Simulation results showed that the fault trend forecasted by the novel OPA model corresponded well with the development and movement of the typhoon above the IEADN.The proposed model also increased the load recovery rate by>24%compared to the traditional OPA model.展开更多
In practical power systems,operators generally keep interface flowing under the transient stability constrained with interface real power flow limits(TS-IRPFL)to guarantee transient stability of the system.Many method...In practical power systems,operators generally keep interface flowing under the transient stability constrained with interface real power flow limits(TS-IRPFL)to guarantee transient stability of the system.Many methods of computing TS-IRPFL have been proposed.However,in practice,the method widely used to determine TS-IRPFL is based on selection and analysis of typical scenarios as well as scenario matching.First,typical scenarios are selected and analyzed to obtain accurate limits,then the scenario to be analyzed is matched with a certain typical scenario,whose limit is adopted as the forecast limit.In this paper,following the steps described above,a pragmatic method to determine TS-IRPFL is proposed.The proposed method utilizes data-driven tools to improve the steps of scenario selection and matching.First of all,we formulate a clear model of power system scenario similarity.Based on the similarity model,we develop a typical scenario selector by clustering and a scenario matcher by nearest neighbor algorithm.The proposed method is pragmatic because it does not change the existing procedure.Moreover,it is much more reasonable than the traditional method.Test results verify the validity of the method.展开更多
The benchmark test system for distribution systems is necessary and important for system analysis and result data checking.In order to meet the development demand of the distribution systems which integrate with a hig...The benchmark test system for distribution systems is necessary and important for system analysis and result data checking.In order to meet the development demand of the distribution systems which integrate with a high penetration of distributed generation(DG),a benchmark test system for the distribution systems which adapts to current and future development trends is proposed.Based on the concentric zone theory and the typical regional settlement model in China,three typical distribution system scenarios corresponding to different system circle structures and regional development characteristics are designed in this paper.In order to adapt to the trend that the distribution systems will present the mixed state of AC and DC,a typical improvement scheme of distribution systems in urban scenario is presented.The benchmark test system of low-voltage distribution systems in a rural scenario is also designed because of the high penetration of DG.Moreover,the system structure,load parameters,integrated capacity and output characteristics of varies types of DG in different scenarios are described in detail.Finally,the simulation results,such as the time series power flow,reliability evaluation and hosting capacity of DGs are given.The benchmark test system proposed in this paper will lay a foundation for future research on distribution systems with a high proportion of DG and effectively support the distribution systems planning,design,operations and dispatches.展开更多
文摘Recent advances in battery energy storage technologies enable increasing number of photovoltaic-battery energy storage systems(PV-BESS)to be deployed and connected with current power grids.The reliable and efficient utilization of BESS imposes an obvious technical challenge which needs to be urgently addressed.In this paper,the optimal operation of PV-BESS based power plant is investigated.The operational scenarios are firstly partitioned using a self-organizing map(SOM)clustering based approach.The revenue optimization model is adopted for the PV-BESS power plants to determine the optimal operational modes under typical conditions for a set of considerations,e.g.power generation revenue,assessing rewards/penalties as well as peak shaving/valley filling revenue.The solution is evaluated through a set of case studies,and the numerical result demonstrates the effectiveness of the suggested solution can optimally operate the BESS with the maximal revenue.
基金supported by the Science and Technology Project of China Southern Power Grid Co.,Ltd.under Grant GDKJXM20222357.
文摘In recent times,the impact of typhoon disasters on integrated energy active distribution networks(IEADNs)has received increasing attention,particularly,in terms of effective cascading fault path prediction and enhanced fault recovery performance.In this study,we propose a modified ORNL-PSerc-Alaska(OPA)model based on optimal power flow(OPF)calculation to forecast IEADN cascading fault paths.We first established the topology and operational model of the IEADNs,and the typical fault scenario was chosen according to the component fault probability and information entropy.The modified OPA model consisted of two layers:An upper-layer model to determine the cascading fault location and a lower-layer model to calculate the OPF by using Yalmip and CPLEX and provide the data to update the upper-layer model.The approach was validated via the modified IEEE 33-node distribution system and two real IEADNs.Simulation results showed that the fault trend forecasted by the novel OPA model corresponded well with the development and movement of the typhoon above the IEADN.The proposed model also increased the load recovery rate by>24%compared to the traditional OPA model.
基金This work was supported by National Key R&D Program of China(2018YFB0904500)and State Grid Corporation of China。
文摘In practical power systems,operators generally keep interface flowing under the transient stability constrained with interface real power flow limits(TS-IRPFL)to guarantee transient stability of the system.Many methods of computing TS-IRPFL have been proposed.However,in practice,the method widely used to determine TS-IRPFL is based on selection and analysis of typical scenarios as well as scenario matching.First,typical scenarios are selected and analyzed to obtain accurate limits,then the scenario to be analyzed is matched with a certain typical scenario,whose limit is adopted as the forecast limit.In this paper,following the steps described above,a pragmatic method to determine TS-IRPFL is proposed.The proposed method utilizes data-driven tools to improve the steps of scenario selection and matching.First of all,we formulate a clear model of power system scenario similarity.Based on the similarity model,we develop a typical scenario selector by clustering and a scenario matcher by nearest neighbor algorithm.The proposed method is pragmatic because it does not change the existing procedure.Moreover,it is much more reasonable than the traditional method.Test results verify the validity of the method.
基金supported in part by the National Key Research and Development Program of China under Grant 2016YFB0900100in part by the National Natural Science Foundation of China under Grant 51977140,Grant U1866207in part by the Natural Science Foundation of Tianjin under Grant 19JCYBJC21300.
文摘The benchmark test system for distribution systems is necessary and important for system analysis and result data checking.In order to meet the development demand of the distribution systems which integrate with a high penetration of distributed generation(DG),a benchmark test system for the distribution systems which adapts to current and future development trends is proposed.Based on the concentric zone theory and the typical regional settlement model in China,three typical distribution system scenarios corresponding to different system circle structures and regional development characteristics are designed in this paper.In order to adapt to the trend that the distribution systems will present the mixed state of AC and DC,a typical improvement scheme of distribution systems in urban scenario is presented.The benchmark test system of low-voltage distribution systems in a rural scenario is also designed because of the high penetration of DG.Moreover,the system structure,load parameters,integrated capacity and output characteristics of varies types of DG in different scenarios are described in detail.Finally,the simulation results,such as the time series power flow,reliability evaluation and hosting capacity of DGs are given.The benchmark test system proposed in this paper will lay a foundation for future research on distribution systems with a high proportion of DG and effectively support the distribution systems planning,design,operations and dispatches.