5-Aminolevulinic acid against strawberry Fusarium wilt:Bidirectional regulation of biocontrol agents and pathogens

Strawberry Fusarium wilt (SFW) is a systematic soil-borne disease caused by Fusarium oxysporum f.sp.fragaria (Fof),which infects the vascular bundles,blocking water and nutrient transport from roots to the aboveground.It is a severe pathogen which spreads rapidly and destroys strawberry production.Finding a way to control this disease is of great scientific value and practical importance.In this study,three fungi were isolated from the vascular tissues of sick strawberries in the field.After DNA sequencing,they were identified as Fof,Aspergillus fumigatus and Trichoderma harzianum,respectively,among which the first two are pathogens and the third is a probiotic.All fungi were controlled by thiophanate-methyl (TM),a commercial fungicide.On PDA medium,20 mg·L^(-1)5-aminolevulinic acid (ALA),a natural non-protein amino acid,promoted T.harzianum proliferation,but inhibited Fof and A.fumigatus.In confrontation test,the growth of Fof or A.fumigatus was inhibited by T.harzianum and exogenous ALA promoted T.harzianum growth but significantly inhibited the pathogen growth.When three species of fungi were separately or combinedly inoculated on healthy strawberry plants,T.harzianum promoted plant growth and development while Fof or A.fumigatus caused growth retardation,where Fof directly caused leaf yellowing and plant wilting.When the plants inoculated with different fungus were treated with ALA,the results turned out that ALA alleviated SFW symptoms by bidirectionally promoting T.harzianum proliferation and inhibiting Fof and A.fumigatus.Thus,ALA might be used in comprehensively controlling SFW in strawberry industry.

双U/f下垂控制下双极MMC-HVDC系统交流阻抗建模及稳定性分析

基于模块化多电平换流器的高压柔性直流输电系统(modular multilevel converter-based high voltage direct current,MMC-HVDC)常采用双极接线方式以提高系统功率输送能力和可靠性。然而目前对于风电场经柔直外送系统的稳定性研究集中于单极接线方式,孤岛直驱风电场与采用不同双极协调控制的双极MMC-HVDC互联系统小信号稳定性问题还有待进一步探究。该文首先考虑频率耦合特性、参考系初相位和直流侧耦合特性的影响,分别建立了采用双U/f下垂控制和定U/f-P/Q控制的双极MMC-HVDC系统交流侧等效SISO阻抗模型,并详细分析了金属回线阻抗和双极间功率均分度对交流阻抗特性的影响。接着对比研究了两种协调控制中共有控制环路和特有控制环路对交流侧负电阻特性及互联系统稳定性的影响规律。最后,孤岛直驱风电场经两种双极协调控制下双极MMC-HVDC外送系统Matlab/Simulink时域仿真结果和硬件在环半实物实时仿真实验结果验证了所提出的小信号阻抗模型的精确性和稳定性分析结论的有效性。

UHF波段功率放大器设计

为某UHF波段的发射机设计一款己类功率放大器,工作于频段430~455 MHz,介绍了谐波控制和匹配网络的设计。在放大器输出匹配网络前添加谐波控制电路,通过对晶体管漏极的谐波控制生成己类放大器的工作波形。同时,在输入、输出阻抗是复阻抗的情况下,使用简化实频技术对电路进行匹配,提高了匹配网络的效率。测试结果显示,该放大器输出功率达60 dBm,对应的增益为20 dB,PAE为79%,达到设计要求。

船舶永磁同步推进电机的优化I/f起动控制方法

为解决高转矩与高转动惯量的船舶推进电机在开环I/f控制中转速和转矩波动大、电机易失步、效率低的问题,提出一种I/f控制改进方法。通过建立转矩角观测器,调节给定电流矢量的幅值,使其跟随负载转矩变化,提高系统鲁棒性。同时,将电机运行状态推进至接近最大转矩电流比状态,提高电机的运行效率;通过瞬时有功功率调节电流矢量的角速度,降低电磁转矩波动,加快电机的转速收敛过程。最后,在Matlab/Simulink中进行仿真实验,实验结果表明该方法可以显著提高推进电机运行效率和稳定性。

Transient Air-Fuel Ratio Control in a CNG Engine Using Fuzzy Neural Networks

The fuzzy neural networks has been used as means of precisely controlling the air-fuel ratio of a lean-burn compressed natural gas (CNG) engine. A control algorithm, without based on engine model, has been (utilized) to construct a feedforward/feedback control scheme to regulate the air-fuel ratio. Using fuzzy neural networks, a fuzzy neural hybrid controller is obtained based on PI controller. The new controller, which can adjust parameters online, has been tested in transient air-fuel ratio control of a CNG engine.

Preliminary Design of Control Network for HT-7U Tokamak Cryogenic System

In the course of the cryoplant modernization, a control network will be set up in order to facilitate the control, the supervision, the centralized data acquisition and the alarm handling of the cryogenic system for HT-7U tokamak. The paper introduces the preliminary design of control network based on the Controller Link Network for HT-7U tokamak cryogenic system. The multi-layer structure mentioned in the paper is the mainstream of automatic control. The control philosophy, the structure of the network and the components for control are also presented.

The Paralleling of High Power High Frequency Amplifier Based on Synchronous and Asynchronous Control

The vertical position of plasma in the HT-7U Tokamak is inherently unstable. In order to realize active stabilization, the response rate of the high-power high-frequency amplifier feeding the active control coils must be fast enough. This paper analyzes the paralleling scheme of the power amplifier through two kinds of control mode. One is the synchronous control; the other is the asynchronous control. Via the comparison of the two kinds of control mode, both of their characteristics are given in the text. At last, the analyzed result is verified by a small power experiment.

Relationship between Tomato (Solanum lycopersicum) Nutrition and the Severity of the Vascular Fusariosis

The vascular fusariosis is one of the main obstacles in the tomato crop production. Currently, the management of the nutrient solution is presented as a control option for fusariosis, for such reason different nutrient solutions with nitrogen (N), phosphorus (P), potassium (K) and calcium (Ca) modifications;in four saladette tomato varieties Bony Best (BB), Manapal (M), Walter (W) and FLA were evaluated in this research, in order to analyze the damage caused by Fusarium oxysporum f.sp. lycopersici (FOL) severity. Tomato plants were inoculated with 3 FOL breeds, establishing a completely random design with a factorial arrangement with six repetitions. Disease’s severity was evaluated 30 days after the inoculation using levels of (0 - 4) of the methodology established by Marlatt and Correll (1988). Afterwards, a statistical analysis was done through the Kruskal Wallis test, in which it was observed that treatments 93 (Ca 207 mg∙L-1, R3, variety BB), 95 (207 mg∙L-1 Ca, R3, variety W), 81 (0Ca, R3, BB) showed less disease severity. In the foliar analysis, the best treatments were 22 (193 mg∙L-1 N, R3, M) for N, the greatest P content was treatment 94 (207 mg∙L-1 Ca, R3, M) for K treatment three and 93 (207 mg∙L-1 Ca, R3, variety BB) greatest Ca content.

Interval Type-2 Fuzzy Hierarchical Adaptive Cruise Following-Control for Intelligent Vehicles

Intelligent vehicles can effectively improve traffic congestion and road traffic safety.Adaptive cruise followingcontrol(ACFC)is a vital part of intelligent vehicles.In this paper,a new hierarchical vehicle-following control strategy is presented by synthesizing the variable time headway model,type-2 fuzzy control,feedforward+fuzzy proportion integration(PI)feedback(F+FPIF)control,and inverse longitudinal dynamics model of vehicles.Firstly,a traditional variable time headway model is improved considering the acceleration of the lead car.Secondly,an interval type-2 fuzzy logic controller(IT2 FLC)is designed for the upper structure of the ACFC system to simulate the driver's operating habits.To reduce the nonlinear influence and improve the tracking accuracy for the desired acceleration,the control strategy of F+FPIF is given for the lower control structure.Thirdly,the lower control method proposed in this paper is compared with the fuzzy PI control and the traditional method(no lower controller for tracking desired acceleration)separately.Meanwhile,the proportion integration differentiation(PID),linear quadratic regulator(LQR),subsection function control(SFC)and type-1 fuzzy logic control(T1 FLC)are respectively compared with the IT2 FLC in control performance under different scenes.Finally,the simulation results show the effectiveness of IT2 FLC for the upper structure and F+FPIF control for the lower structure.

基于改进的U-Net网络模型的叶片病害检测

为了满足作物病虫害绿色防治对病虫害程度检测的需求,设计了一种改进的U-Net网络模型用于作物叶片病虫害程度的检测。首先,选择ResNet50网络作为模型的主干网络,借助迁移学习来提升训练收敛速度和降低计算成本。其次,引入注意力机制对U-Net网络的各层特征提取和融合进行优化,以提高网络模型接收关键信息的能力。实验结果表明,改进的U-Net512网络模型具有最优的检测性能,平均检测精度达到90.14%,平均绝对误差为276.3。通过分析模型不同采样深度下的各层特征图发现,注意力机制的引入使网络模型能够获取并融合叶片整体特征和病害区域特征两个维度的信息,进一步提升模型检测性能。这种方法不仅能够有效地检测作物叶片的病虫害程度,而且具有较高的准确性和可靠性,有助于实现作物病虫害的绿色防治。

基于色散调控氟碲酸盐玻璃光纤的O-U波段平坦光频梳产生

光学频率梳(简称光频梳)作为一种优秀的多波长光源在通信领域具有巨大的应用潜力。通过将光频梳光源与波分复用技术(WDM)、空分复用技术结合(SDM),通信系统可以具有百Tbit/s量级的传输速率,在5G/6G通信、物联网、自动驾驶等方面具有重要的应用价值。目前实现光频梳的方法主要有以下四种,分别为基于锁模激光器产生飞秒光频梳、基于光学微腔产生光频梳、基于电光调制器产生光频梳以及基于行波四波混频产生光频梳。它们各具特点,但均很难同时实现宽光谱、高信噪比、高平坦度、高的单梳齿功率以及梳齿频率间隔大范围可调,这在一定程度上影响了光频梳在光通信领域的应用。本文提出基于受激布里渊激光腔产生种子梳,采用腔外负色散光纤进行脉冲压缩,进一步利用色散调控的高非线性氟碲酸盐光纤进行扩谱,从而实现光频梳产生。数值计算结果表明,通过该系统,我们可以得到重复频率大范围可调、光谱覆盖整个O-U波段且在O-U波段梳齿强度标准差小于5 dB的平坦光频梳,证明了通过基于布里渊激光腔与色散调控高非线性氟碲酸盐光纤的光学系统产生可用于光通信的平坦光频梳的可行性。

经DRU送出的海上风电交流系统潮流计算方法

目前柔性直流输电系统是远海风电并网的典型方案,而整流站采用DRU(二极管不控整流单元)可以进一步提升直流系统的经济性和可靠性。因此提出基于构网型风电机组和DRU的海上风电交流系统稳态潮流计算方法。描述了基于DRU的海上风电并网系统拓扑结构,介绍了风电机组采用Q-f(无功功率-频率)下垂控制的构网型控制策略,提出了稳态潮流计算方法。该方法根据DRU换流站交流母线的无功功率不平衡量来进行潮流迭代,并计及构网型风电机组的Q-f下垂控制特性。在海上风电低频交流汇集送出系统和海上风电中频交流汇集直流送出系统中,分析了基于构网型风电机组和DRU的海上风电交流系统的稳态运行特性,验证了所提方法的有效性。

The Main Diseases and Control Measures of Panax notoginseng(Burk) F. H. Chen in Wuzhou City

The main symptoms of root rot,anthracnose,blight and damping-off of Panax notoginseng( Burk) F. H. Chen are introduced in the paper,and the corresponding control measures are elaborated from the aspects of agricultural management measures,seed disinfection,seedbed treatment and chemical control.

基于模糊解耦策略的小型注塑机料筒温度F-PI复合控制器

在塑料产品的生产过程中,注塑机料筒温度的响应速度和稳定性对最终塑料产品的质量具有重要影响。为了提高小型注塑机料筒温度的控制精度,针对料筒具有的惯性大、非线性、大滞后、强耦合等温度特性,在模糊控制不能满足控制要求的背景下,提出了基于相邻加热段之间温差的模糊解耦策略,通过利用相邻加热段之间的温差信息,建立模糊解耦控制器,对各段料筒之间的温度耦合进行解耦控制。实验结果表明,该控制方法效果良好,达到目标温度所用时间为1092 s,最大超调量只有3%,但稳态性能较差。为解决稳态性能较差的问题,在模糊解耦的基础上建立F-PI复合控制器,通过引入积分环节消除系统在稳态下的偏差。在Matlab/Simulink环境下进行仿真并在注塑机上进行验证,结果表明,F-PI复合控制方法不仅具有良好的动态响应,还具有更高的稳态精度,稳态偏差仅为±1℃。因此基于模糊解耦策略的F-PI复合控制方法不仅能对料筒的温度耦合进行解耦控制,还有效提高了系统的稳定性和控制精度,具有良好的鲁棒性。

基于I/F启动的PMSM无感复合控制方法

针对永磁同步电机全速域无位置传感器控制,电机起动时观测器位置估算困难的问题。提出一种电流频率比结合龙伯格观测器的无位置传感器控制策略。首先,在低速域中,采用I/F控制启动;在中高速域,引入龙伯格观测器和锁相环进行位置估计。其次,针对两种控制方法之间直接过渡导致的振荡问题,本文提出了新型平滑过渡策略;对于PI调节器存在协调性与抗干扰能力差的问题,引入自抗扰控制并与新型平滑过渡策略相结合,进一步形成一种复合过渡法;最后经过Simulink和电机实验平台的验证,仿真和实验结果显示,复合控制方法过渡过程平稳并且转速超调和误差明显减小。

孤岛微电网电流同步U-I下垂控制方法

采用电压-电流(U-I)下垂控制的孤岛微电网系统始终运行于工频频率,避免了传统下垂控制存在的频率偏差及频率越限问题,但电源间易产生环流,功率分配精度差。为此,提出电流同步U-I下垂控制方法,该方法由电流同步控制及U-I幅值下垂控制两部分构成。前者通过调节输出电压相角使各电源输出电流相角一致,以抑制电源间环流;后者依据输出电流的幅值调节输出电压的幅值,使各电源出力依据自身容量分配。在此基础上,建立双端系统的小信号模型,分析电流同步控制环路中控制参数对系统稳定性的影响,为参数设计提供依据。仿真及实验结果表明,相比U-I下垂控制,所提方法的系统环流减小50%以上,电压畸变率改善近10%,电源间功率分配精度及系统电能质量均得到明显提升。

Identification of Biocontrol Strain HJX1 and Determination of Its Antifungal Spectrum

A biocontrol strain HJX1,which had good inhibitory effect against Fusarium oxysporum f. sp. cubense,was identified as Bacillus subtilis based on traditional morphology,16 S rRNA gene sequence and fatty acid profiles. The sequence of 16 S rRNA gene had 99% homology to B. subtilis according to the DNA fragment of 1 521 bp amplified with a pair of universal primers,P0 and P6,of bacteria. Confront culture with pathogenic fungi showed that this strain had good inhibitory effect against 10 pathogenic fungi.

U-model Enhanced Dynamic Control of a Heavy Oil Pyrolysis/Cracking Furnace

This paper proposes a case study in the control of a heavy oil pyrolysis/cracking furnace with a newly extended U-model based pole placement controller(U-PPC). The major work of the paper includes: 1) establishing a control oriented nonlinear dynamic model with Naphtha cracking and thermal dynamics; 2) analysing a U-model(i.e., control oriented prototype) representation of various popular process model sets; 3)designing the new U-PPC to enhance the control performance in pole placement and stabilisation; 4) taking computational bench tests to demonstrate the control system design and performance with a user-friendly step by step procedure.

Transferring in control plane for 5G heterogeneous networks

The heterogeneous network with the separation of the control plane and user plane(C/U) is an evolutionary approach to the fifth generation(5 G) to achieve high system coverage and capacity. To minimize signaling load of the core network when there is a macro base station(BS) failure in the control plane, a scheme of transferring the control of small cells under the coverage of the failure macro BS to the neighbor macro BSs is proposed. The average handover rates between small cells related to user mobilities, the extended coverage of the neighboring macro BSs under the constraint of transmitting power and the load balance index of the system are analyzed, based on which the formula of maximizing the handovers processed by macro BSs is constructed and further solved by the convex optimization methods. Simulation results indicate that the proposed scheme can effectively increase the total handovers processed by the macro BSs and thus reduce the signaling load of the core network.

基于双MPC与变斜率I/f的SPMSM快速启动控制策略研究

为了表贴式永磁同步电机(SPMSM)快速启动应用,针对现有恒流频比控制(I/f)启动采用固定参考斜率导致启动慢以及后续投切为双PI闭环磁场定向控制(FOC)策略动态响应能力不足的问题,提出一种内、外环均采用模型预测控制(MPC)策略的SPMSM变斜率I/f(DI/f)启动控制策略。首先通过模型预测推算出下一时刻的转子位置、转速。其中转速用于估算负载转矩,转子位置等效为变斜率I/f启动中的动态参考频率,构成变DI/f启动。当电机转速达到设定转速后,系统自动投切为双闭环MPC控制。模型预测转速外环通过当前转速与估算负载计算下一时刻q轴电流的额定值,实现启动到稳态的平稳快速切换。仿真与实验结果验证该算法的可行性与有效性,并使永磁同步电机的启动上升时间缩短了41.9%,调节时间缩短了41.1%。