To analyze the effects of width and thickness of each composition element of mixed steel U-rib-stiffened plates on the welding residual stress distribution, the distribution of the U-rib and the plate residual stress ...To analyze the effects of width and thickness of each composition element of mixed steel U-rib-stiffened plates on the welding residual stress distribution, the distribution of the U-rib and the plate residual stress was calculated using a simplified calculation method. The method involved welding the mixed steel U-rib-stiffened plates for a structure with different sizes and different strength ratios of U-rib to plate. Based on a welding residual stress numerical simulation method validated by the blind hole method test, the distribution law of the mixed steel U-rib stiffened plate was studied. The results showed that the change of plate width has little impact on the welding residual stress and that the ratio of the thicknesses of the plate to U-rib stiffeners, the thickness of the plate, and the thickness of the U-rib has a great influence on the distribution of the welding residual stress. The thickness of plate and steel strength also greatly influenced the distribution width of the residual tensile stress. While analyzing the compression capacity of U-rib-stiffened plates, the simplified distribution of welding residual stress was used.展开更多
Based on the analysis of the three-dimensional liquid surface behavior of TIG penetrated weld pool,the three-dimensional shape models of weld pool with different values of the back fusion zone radius RB were obtained....Based on the analysis of the three-dimensional liquid surface behavior of TIG penetrated weld pool,the three-dimensional shape models of weld pool with different values of the back fusion zone radius RB were obtained.The effects of arc on the penetrated weld pool were studied by numerical simulation with finite elements analysis software Surface Evolver.The results show that the size and shape of the back weld pool are not affected obviously by the arc,and the top surface of the weld pool is lowered by arc.From pulse background to pulse peak,the increase of the arc voltage(or the arc light intensity) is due to two factors.One is the increase of the current,and the other is the lowering of the top weld pool surface.展开更多
文摘To analyze the effects of width and thickness of each composition element of mixed steel U-rib-stiffened plates on the welding residual stress distribution, the distribution of the U-rib and the plate residual stress was calculated using a simplified calculation method. The method involved welding the mixed steel U-rib-stiffened plates for a structure with different sizes and different strength ratios of U-rib to plate. Based on a welding residual stress numerical simulation method validated by the blind hole method test, the distribution law of the mixed steel U-rib stiffened plate was studied. The results showed that the change of plate width has little impact on the welding residual stress and that the ratio of the thicknesses of the plate to U-rib stiffeners, the thickness of the plate, and the thickness of the U-rib has a great influence on the distribution of the welding residual stress. The thickness of plate and steel strength also greatly influenced the distribution width of the residual tensile stress. While analyzing the compression capacity of U-rib-stiffened plates, the simplified distribution of welding residual stress was used.
文摘Based on the analysis of the three-dimensional liquid surface behavior of TIG penetrated weld pool,the three-dimensional shape models of weld pool with different values of the back fusion zone radius RB were obtained.The effects of arc on the penetrated weld pool were studied by numerical simulation with finite elements analysis software Surface Evolver.The results show that the size and shape of the back weld pool are not affected obviously by the arc,and the top surface of the weld pool is lowered by arc.From pulse background to pulse peak,the increase of the arc voltage(or the arc light intensity) is due to two factors.One is the increase of the current,and the other is the lowering of the top weld pool surface.
