Age dating of lacustrine sediments in Lake Tianshuihai of the Tibetan Plateau by using U-series isochron method and its significance

The age of the clastic-clay sediments with varied content of carbonate in core TS95 taken from the Lake Tianshuihai in the northwest of the Tibetan Plateau was determined successfully by using the total sample dissolution U-series isochron method for the first time. With this method, the serial absolute timescale (isotope time scale) covered the last 240 ka in the main body of the Tibetan Plateau with a sea level up to 4000 m is also established for the first time, thereby laying the foundation for the research on the paleo-climate and palaeoenvironment in the Lake Tianshuihai region as well as the relationship between evolution of the Tibetan Plateau and global changes. In addition to a brief introduction of the basic principles, the procedures of experiments, and the results, this note also presents the adaptability and superiority of this method as well as its possible problems.

ESR and U-series ages of coral reef samples from shallow drill holes in the South China Sea

The ages of coral reef samples from several shallow drill holes in the South China Sea are determined by ESR and U-series (230Th/234U) methods. The experimental results show ideal agreement between ESR and U-series ages and that the coral reefs were formed in the early Holocene. In the determination of natural total dose of coral reef by use of the additive dose method good results can be obtained by exponential fitting, no matter how the effect of dose saturation is. It was found that the ratio of the natural ESR signal intensity ( I0) to the ESR signal intensity at dose saturation ( Imax) of sample can reflect the significance of a irradiation efficiency-k value. Using the k value of sample determined by the formula given in this paper, the precision of ESR dating of marine carbonates can be improved.

Activity of Changbaishan Tianchi Volcano Since Late Pleistocene——The Constrain From Geochronology of High Precision U-Series Tims Method

samples of lava and pumice from the cone of Changbaishan Tianchi Volcano, Jiling, China, were dated by using high precision U-series TIMS method. We conclude that the bottom of the cone formed before 350 ka, the middle part in 70～80 ka, the upper during 20～1ka, and the top less than 1ka, and the age based periods of the volcano eruption since Late Pleistocene is given as follows: >350ka,70ka,18～25ka,10ka, 4C5ka, 1～0.75ka, which may offer the basis for the study of volcanic disaster in future. In addition, the principle of dating young volcanic rocks by using U-series TIMS method is introduced briefly. Differentiation characteristics of U and Th in different minerals of the volcanic rocks are discussed, and the ability producing isochrons, based on U and Th differentiation, are discussed. In the last part of the paper, the closure of samples to the elements U and Th, which is important for age results, is discussed by using ( 234 U/ 238 U) radioactivity ratio which can be used to monitor if the samples have been weathered or eroded or leached since the time they formed. In this study, all samples have ( 234 U/ 238 U) activity ratios within 1% of secular equilibrium (( 234 U/ 238 U) radioactivity ratios are unity), indicating no disturbance of the 234 U～ 238 U system. All of these discussions show that the TIMS method is good to date Tianchi volcanics and the results are reliable.

Uniform isochronous center of a class of higher degree polynomial differential systems

In this paper,we give the necessary and sufficient conditions for a class of higher degree polynomial systems to have a uniform isochronous center.At the same time,we prove that for this system the composition conjecture is correct.

Improved isochronous mass spectrometry with tune measurement

In conventional isochronous mass spectrometry(IMS)performed on a storage ring,the precision of mass measurements for short-lived nuclei depends on the accurate determination of the revolution times(T)of stored ions.However,the resolution of T inevitably deteriorates due to the magnetic rigidity spread of the ions,limiting the mass-resolving power.In this study,we used the betatron tunes Q(the number of betatron oscillations per revolution)of the ions and established a correlation between T and Q.From this correlation,T was transformed to correspond to a fixed Q with higher resolution.Using these transformed T values,the masses of ^(63)Ge,^(65)As,^(67)Se,and ^(71)Kr agreed well with the mass values measured using the newly developed IMS(Bρ-IMS).We also studied the systematics of Coulomb displacement energies(CDEs)and found that anomalous staggering in CDEs was eliminated using new mass values.This method of T transformation is highly effective for conventional IMS equipped with a single time-of-flight detector.

ISOCHRONOUS STRESS-STRAIN CURVES OF LOW ALLOY STEEL CROSS-WELD-SPECIMEN AT HIGH TEMPERATURE

In this work, a parametric approach is presented and utilized to determine the creep properties of weldments; then the model of creep strain for cross weld specimen is given. On the basis of the experimental results, attempt has been made to establish equations of the isochronous stress-strain for weld joint that can predict the function of loading and service time in use of the creep data of base metal and weld metal.

Rb-Sr and Sm-Nd Isochron Ages of the Dongmozhazhua and Mohailaheng Pb-Zn Ore Deposits in the Yushu area, southern Qinghai and Their Geological Implications

Located on the northeast margin of the Qiangtang terrane between the Jinshajiang suture zone and Bangonghu-Nujiang suture zone,the Dongmozhazhua and Mohailaheng Pb-Zn deposits in the Yushu area of Qinghai Province are representative Pb-Zn deposits of the Pb-Zn-Cu polymetallic mineralization belt in the northern part of the Nujiang-Lancangjiang-Jinshajiang area,which are in the front belt of the Yushu thrust nappe system.The formed environments of these two deposits are different from those of sediment-hosted base metal deposits elsewhere in the world.The authors hold that they were formed during the Indian-Asian continental collision and developed within the fold-thrust belt combined with thrust and strike-slip-related Cenozoic basins in the interior of the collisional zone.Studying on the metallogenic epochs of these two deposits is helpful to the understanding of ore-forming regularity of the regional Pb-Zn-Cu mineralization belt and also to the search for new deposits in this region.The age of the Dongmozhazhua deposit has been determined by the Rb-Sr isochron method for sphalerite residues,whereas the age of the Mohailaheng deposit has been determined by the Rb-Sr isochron method for sphalerite residues and the Sm-Nd isochron method for fluorite.The age of the Dongmozhazhua deposit is 35.0-±0.0 Ma （（87Sr/86Sr）0=0.708807） for sphalerite residues.The age of the Mohailaheng deposit is 32.2±0.4 Ma （（87Sr/86Sr）o=0.708514） for sphalerite residues and 31.8±0.3 Ma （（143Nd/144Nd）o=0.512362） for fluorite with an average of 32.0 Ma.Together with the regional geological setting during mineralization,a possible tectonic model for metallogeny of the Dongmozhazhua and Mohailaheng Pb-Zn deposits has been established.These two ages are close to the ages of the Pb-Zn deposits in the Lanping and Tuotuohe basins,indicating that it is possible that the narrow 1000-kilometer-long belt controlled by a thrust nappe system on the eastern and northern margins of the Tibetan plateau could be a giant Pb-Zn mineralized belt.

Charge resolution in the isochronous mass spectrometry and the mass of ^(51)Co

Isochronous mass spectrometry(IMS)of heavyion storage rings is a powerful tool for the mass measurements of short-lived nuclei.In IMS experiments,masses are determined through precision measurements of the revolution times of the ions stored in the ring.However,the revolution times cannot be resolved for particles with nearly the same mass-to-charge(m/q)ratios.To overcome this limitation and to extract the accurate revolution times for such pairs of ion species with very close m/q ratios,in our early work on particle identification,we analyzed the amplitudes of the timing signals from the detector based on the emission of secondary electrons.Here,the previous data analysis method is further improved by considering the signal amplitudes,detection efficiencies,and number of stored ions in the ring.A sensitive Z-dependent parameter is introduced in the data analysis,leading to a better resolution of ^(34)Ar^(18+) and ^(51)Co^(27+) with A/Z=17/9.The mean revolution times of ^(34)Ar^(18+) and ^(51)Co^(27+) are deduced,although their time difference is merely 1.8 ps.The uncorrected,overlapped peak of these ions has a full width at half maximum of 7.7 ps.The mass excess of ^(51)Co was determined to be-27;332e41T keV,which is in agreement with the previous value of-27;342e48T keV.

Auriferous Quartz Veins from the Dongping Gold Deposit, NW Hebei Province and Metallogenesis—Fluid Inclusion Rb-SrIsochron Evidence

The Dongping gold deposit, situated on the northern margin of the North China Platform, is a composite deposit composed of auriferous quartz vein-type and altered rock-type ore bodies. It is hosted in the inner contact zone of an alkaline intrusion which was intruded into Archean metamorphic rocks and was formed not later than the Hercynian peried. Auriferous quartz veins of the deposit are dated with the fluid inclusion Rb-Sr isochron method at 103 ±4Ma, indicating that the gold deposit was formed in the Yenshanian period. 87Sr/86Sr sourcetracing shows the ore-forming materials came dominantly from alkaline intrusions. These results, combined with other isotope and REE data, suggest that the Dengping gold deposit is not a traditional magmatic hydrothermal deposit, but a reworked hydrothermal deposit related to heated and evoved meteoric water.

The Cyclicity of the Period Annulus Around the Quadratic Isochronous Center

The number of the limit cycles bifurcating in small quadratic perturbations of quadratic systems with an ischronous center is studied, it turns out that the cyclicity of the period annulus around one kind of quadratic isochronous center is two.

Effects of Solution Atoms and Precipitates on Isochronal Annealing Behavior of Cold-Rolled Squeeze-Cast SiCw/Al Composites

SiCw/Al and SiCw/6061Al composites, which contained 15 vol pct of whiskers, were fabricated through a squeeze cast route followed by cold rolling and isochronal annealing. Effects of whicker, solution atoms and precipitates on isochronal annealing behavior of cold rolled composites were investigated by comparing the isochronal annealing behavior between pure Al, SiCw/Al, solution-treated SiCw/6061Al and aged SiCw/6061Al. It was found that the recrystallization of SiCw/Al composite occurs earlier than that of pure Al, indicating SiCw has a role of particle stimulated nucleation. Solution atoms have no significant influence on the isochronal annealing behavior of SiCw/6061Al composite, while precipitates have such a strong retarding effect on the recrystallization of SiCw/6061Al composite that the isochronal annealing curve of aged SiCw/6061 composite loses the definable recrystallization step.

Adaptive Isochronal Synchronization in Mutually Coupled Chaotic Systems

This paper studies the problem of isochronal synchronization of chaotic systems with time-delayed mutual coupling. Based on the invariance principle of differential equations, an adaptive feedback scheme is proposed for the stability of isochronal synchronization between two identical chaotic systems. Unlike the usual linear feedback, the variable feedback strength is automatically adapted to isochronally synchronize two identical chaotic systems with delay-coupled, so this scheme is analytical, and simple to implement in practice. Simulation results show that the isochronal synchronization behavior is determined by time delay.

Discussion on Rb-Sr Isochron Ages of Granitoids in the Hengduan Mountains

Based on the Rb-Sr isotopic study of the granitoids in the Hengduan Mountains, the classification andgeologic significance of whole-rock Rb-Sr isochrons as well as the factors influencing homogenization of theisotopic systems are discussed. Usually. there is no good linear correlation of isochrons for diorites andalkali-rich intrusive rocks (including alkaline rock and alkalic granite). But by means of the external isochron ofmonominerals from the rocks. isochrons with good linear correlation as well as ages and Sr initial ratios with ahigh confidence can be obtained. In order to obtain a satisfactory isochron, the discriminant parameters shouldbe calculated from the Rb/Sr ratios and estimated ages of samples. Only those that meet the requirements canbe used as the Rb-Sr isochrons. The quality of an isochron should be judged from three factors, i.e. correlationcoefficient. MSWD and homogenization degree.

Dating Model of Illite Grain Rb-Sr Isochron and Its Application to Precambrian Stratigraphy

This paper discusses the Rb-Sr geochemical behaviour of illites in the sedimentary process, and points out that illites of the lmd and lm types could reach Sr-isotopic equilibrium with its environmental medium during the sedimentary process and initial stage of diagenesis, and illite grains of different sizes have various Rb contents. A new dating method for sedimentary rocks----a dating model of illite grain Rb-Sr isochron----is established, in consideration of the geochemical process of Sr-isotopic homogenization and differentiation in the course of their formation and evolution. In addition, the paper concerns the application of the dating model to the Precambrian unmetamorphosed sedimentary rocks in western Henan Province, which gives satisfactory results coincident with the geological facts.

2-6 First Isochronous Mass Measurements with Two Time-of-Flight Detectors at CSRe

In conventional isochronous mass spectrometry (IMS), single time-of-flight (TOF) method is adopted to measurethe ions' revolution times in a storage ring which can then be used to calculate the ions' masses. However, themass-to-charge ratio (m=q) is only related to the revolution time (T) under the condition that is equal to taccording to the following equation:

2-4 Principle of Isochronous Mass Spectrometry Using Two Time-of-flight Detectors

Isochronous mass spectrometry (IMS) in storage rings is a powerful tool for mass measurements of exotic nucle with very short half-lives down to several tens of microseconds, using a multicomponent secondary beam separated in-ight without cooling. However, the inevitable momentum spread of secondary ions limits the precision of nuclear masses determined by using IMS.

2-7 Charge and Frequency Resolved Isochronous Mass Spectrometry in Storage Rings: First Direct Mass Measurement of the Short-lived Neutron-de cient 51Co Nuclide

Isochronous mass spectrometry in storage rings is a successful technique for the precision mass measurements ofthe nuclides with half-lives down to tens of microseconds[1]. Since the isochronous condition =t greatly reducesthe influence of the velocity difference on the ion revolution periods, the revolution period difference ΔT =T ??TRof a stored ion with respect to a reference time TR is directly related to its mass-to-charge ratio difference Δ(m=q),written in the first order as:

2-8 SimCSR Program for the Simulation of the Isochronous Mass Spectrometry at the HIRFL-CSR

Until now, several isochronous mass spectrometry (IMS) experiments have been successfully performed usingvarious primary beams at the HIRFL-CSR and masses of both proton-rich and proton-deficient exotic nuclei havebeen measured. In order to improve the performance of the IMS experiments and to provide a reliable tool fordesigning and preparing the future experiments, a simulation code, named SimCSR is developed.Presently, six-dimension phase-space linear transmission theory is applied to simulate the transmission of ionsin the experimental storage ring (CSRe). The basic algorithm is Bf = MBi. The Bi and Bf are six-dimensionphase-space vectors of ions at the entrance and exit of each element of the CSRe lattice, respectively. M is a6-by-6-dimension first-order transfer matrix of each element. M is calculated using formulas described in Ref.[1]. Inthe simulations, the ring lattice is considered in detail, and the same magnetic setting as in our previous experimentwith 58Ni projectile fragments[2] is considered. The ions are assumed to circulate 300 turns inside the CSRe.

2-4 First Isochronous Mass Measurement in Neutron-rich Region at CSRe

Mass is one of the fundamental properties of atomic nuclei. Isochronous mass spectrometry (IMS), using astorage ring combined with an in-flight separator, has been shown to be a powerful tool for mass measurementof exotic nuclei[1]. Recently, masses of many proton-rich nuclides were accurately determined at the HIRFL-CSRfacility[2]. In this paper, we described the first isochronous mass measurement of neutron-rich nuclides at CSRe.This experiment was performed at the end of 2011. In the experiment, the primary beam of 86Kr28+ ions wasaccumulated and accelerated to an energy of 460.65 MeV/u in the synchrotron CSRm. The 86Kr28+ ions were fastextracted and focused on a 15 mm thick beryllium target which was placed at the entrance of the RIBLL2 (anin-flight fragment separator).