The accurate prediction of strength and deformability characteristics of rock mass is a challenging issue.In practice,properties of a rock mass are often estimated from available empirical relationships based on the u...The accurate prediction of strength and deformability characteristics of rock mass is a challenging issue.In practice,properties of a rock mass are often estimated from available empirical relationships based on the uniaxial compressive strength(UCS).However,UCS does not always give a good indication of in situ rock mass strength and deformability.The aim of this paper is to present a methodology to predict the strength and deformability of a jointed rock mass using UDEC(universal distinct element code).In the study,the rock mass is modelled as an assemblage of deformable blocks that can yield as an intact material and/or slide along predefined joints within the rock mass.A range of numerical simulations of uniaxial and triaxial tests was conducted on rock mass samples in order to predict the equivalent mechanical properties for the rock mass under different loading directions.Finally,results are compared with the deformability parameters obtained by analytical methods.展开更多
三峡库区周期性水位升降引起的消落带岩体劣化对典型危岩岸坡稳定性具有重大影响。基于野外调研及地勘资料,采用通用离散单元法程序(universal distinct element code,简称UDEC)研究了消落带劣化区形态对近水平层状高陡危岩岸坡的稳定...三峡库区周期性水位升降引起的消落带岩体劣化对典型危岩岸坡稳定性具有重大影响。基于野外调研及地勘资料,采用通用离散单元法程序(universal distinct element code,简称UDEC)研究了消落带劣化区形态对近水平层状高陡危岩岸坡的稳定性影响。研究表明:目前三峡库区巫山段的近水平层状危岩岸坡消落带岩体劣化严重,在不同消落带劣化区存在紧密层状、松散碎裂状、溶蚀凹腔状、含挤压碎裂带等典型消落带劣化区形态;含有第1种消落带劣化区形态的危岩岸坡稳定性较好,危岩体位移较小,失稳模式为滑移破坏;含有第2种消落带劣化区形态的危岩岸坡危岩体先向坡内偏移,其后随着消落带岩体支撑强度弱化向坡外倾倒破坏;含有第3种消落带劣化区形态的危岩岸坡危岩体向坡外位移较大,失稳模式为倾倒破坏;含有第4种消落带劣化区形态的危岩岸坡稳定性主要受挤压破碎带的力学性质控制,易产生沿破碎带切割面的旋转滑移破坏;通过对以上4种劣化区形态的危岩岸坡增加防治加固措施,危岩体的变形位移得到了不同程度的有效控制。展开更多
The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of...The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium theory.The results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition characteristics.Generally,failure first occurs in certain superimposed strata slightly far from the goaf.Subsequently,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the goaf.This process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the goaf.The deep fracture plane generally makes an angle of 12°-20°with the normal to the steeply dipping discontinuities.The effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than expected.The strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling failure.However,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever beams.By taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the key stratum,moving downward toward and upwards away from the goaf.展开更多
为了探究锚杆不同锚固参数对顺层岩质边坡稳定性的影响,基于综合考虑锚杆轴向作用力和横向作用力的锚杆数值模型,嵌入离散元软件UDEC(universal distinct element code)中的局部加固单元LOCAL REINFORCE单元,针对某顺层岩质边坡,分析了...为了探究锚杆不同锚固参数对顺层岩质边坡稳定性的影响,基于综合考虑锚杆轴向作用力和横向作用力的锚杆数值模型,嵌入离散元软件UDEC(universal distinct element code)中的局部加固单元LOCAL REINFORCE单元,针对某顺层岩质边坡,分析了锚杆长度、锚固角、锚杆间距和布设方式对边坡稳定性的影响,并基于正交试验提出了锚固优化方案。结果表明:锚杆存在有效长度,在有效长度内,锚杆长度和边坡安全系数存在线性关系;锚杆存在最优锚固角,且锚杆长度越大,最优锚固角越小;锚杆间距越大,边坡安全系数越小,且安全系数下降速率随间距的增大逐步减小;以边坡安全系数和锚杆用量为评价指标,通过正交试验对等长支护锚固参数进行了优化设计,得出了较佳的两个锚固试验方案;各锚固参数对边坡稳定性影响由大到小分别为:锚杆间距、锚杆长度、锚固角;锚杆布设方式对边坡稳定性的提升由大到小分别为:由长到短型、等长布置型、由短到长型。在考虑锚杆布设方式时,应使锚杆穿越的岩层与边坡位移情况相匹配。展开更多
以淮南煤矿典型工作面为例,采用离散元数值软件UDEC(universal distinct element code)对工作面回采过程中上下煤岩体内应力场的变化及直接顶冒落过程进行了模拟,分析了上覆煤岩体裂隙产生、发展的形成过程,得到了上覆煤岩裂隙演化规律...以淮南煤矿典型工作面为例,采用离散元数值软件UDEC(universal distinct element code)对工作面回采过程中上下煤岩体内应力场的变化及直接顶冒落过程进行了模拟,分析了上覆煤岩体裂隙产生、发展的形成过程,得到了上覆煤岩裂隙演化规律。研究结果表明,倾向方向工作面回采后,上覆煤岩体内产生冒落、裂隙带和离层带,在工作面内上角位置产生O型圈裂隙带,裂隙发育最大高度为45 m。煤层走向回采方向得到了初期来压步距约50 m,周期来压步距约20 m,上覆煤岩体裂隙在采空区上方约呈45°角发展,并随工作面的前进由下向上、由后往前依次演变。该结果对于煤与瓦斯共采中瓦斯抽放钻孔方位的布置具有工程指导意义。展开更多
文摘The accurate prediction of strength and deformability characteristics of rock mass is a challenging issue.In practice,properties of a rock mass are often estimated from available empirical relationships based on the uniaxial compressive strength(UCS).However,UCS does not always give a good indication of in situ rock mass strength and deformability.The aim of this paper is to present a methodology to predict the strength and deformability of a jointed rock mass using UDEC(universal distinct element code).In the study,the rock mass is modelled as an assemblage of deformable blocks that can yield as an intact material and/or slide along predefined joints within the rock mass.A range of numerical simulations of uniaxial and triaxial tests was conducted on rock mass samples in order to predict the equivalent mechanical properties for the rock mass under different loading directions.Finally,results are compared with the deformability parameters obtained by analytical methods.
文摘三峡库区周期性水位升降引起的消落带岩体劣化对典型危岩岸坡稳定性具有重大影响。基于野外调研及地勘资料,采用通用离散单元法程序(universal distinct element code,简称UDEC)研究了消落带劣化区形态对近水平层状高陡危岩岸坡的稳定性影响。研究表明:目前三峡库区巫山段的近水平层状危岩岸坡消落带岩体劣化严重,在不同消落带劣化区存在紧密层状、松散碎裂状、溶蚀凹腔状、含挤压碎裂带等典型消落带劣化区形态;含有第1种消落带劣化区形态的危岩岸坡稳定性较好,危岩体位移较小,失稳模式为滑移破坏;含有第2种消落带劣化区形态的危岩岸坡危岩体先向坡内偏移,其后随着消落带岩体支撑强度弱化向坡外倾倒破坏;含有第3种消落带劣化区形态的危岩岸坡危岩体向坡外位移较大,失稳模式为倾倒破坏;含有第4种消落带劣化区形态的危岩岸坡稳定性主要受挤压破碎带的力学性质控制,易产生沿破碎带切割面的旋转滑移破坏;通过对以上4种劣化区形态的危岩岸坡增加防治加固措施,危岩体的变形位移得到了不同程度的有效控制。
基金Financial support for this work was provided by the Youth Fund Program of the National Natural Science Foundation of China (No. 42002292)the General Program of the National Natural Science Foundation of China (No. 42377175)the General Program of the Hubei Provincial Natural Science Foundation, China (No. 2023AFB631)
文摘The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium theory.The results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition characteristics.Generally,failure first occurs in certain superimposed strata slightly far from the goaf.Subsequently,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the goaf.This process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the goaf.The deep fracture plane generally makes an angle of 12°-20°with the normal to the steeply dipping discontinuities.The effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than expected.The strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling failure.However,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever beams.By taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the key stratum,moving downward toward and upwards away from the goaf.
文摘为了探究锚杆不同锚固参数对顺层岩质边坡稳定性的影响,基于综合考虑锚杆轴向作用力和横向作用力的锚杆数值模型,嵌入离散元软件UDEC(universal distinct element code)中的局部加固单元LOCAL REINFORCE单元,针对某顺层岩质边坡,分析了锚杆长度、锚固角、锚杆间距和布设方式对边坡稳定性的影响,并基于正交试验提出了锚固优化方案。结果表明:锚杆存在有效长度,在有效长度内,锚杆长度和边坡安全系数存在线性关系;锚杆存在最优锚固角,且锚杆长度越大,最优锚固角越小;锚杆间距越大,边坡安全系数越小,且安全系数下降速率随间距的增大逐步减小;以边坡安全系数和锚杆用量为评价指标,通过正交试验对等长支护锚固参数进行了优化设计,得出了较佳的两个锚固试验方案;各锚固参数对边坡稳定性影响由大到小分别为:锚杆间距、锚杆长度、锚固角;锚杆布设方式对边坡稳定性的提升由大到小分别为:由长到短型、等长布置型、由短到长型。在考虑锚杆布设方式时,应使锚杆穿越的岩层与边坡位移情况相匹配。
