In order to investigate the synergistic effect of re-dispersible powder-ethylene-vinyl acetate copolymer(EVA) and polypropylene fiber on the crack resistance of concrete under thermal fatigue loading, the compressive ...In order to investigate the synergistic effect of re-dispersible powder-ethylene-vinyl acetate copolymer(EVA) and polypropylene fiber on the crack resistance of concrete under thermal fatigue loading, the compressive strength, ultimate tensile strength, ultimate tensile strain and tensile modulus of elasticity were tested. In addition, ultrasonic method and scanning electron microscope analysis were used to explain the microstructure mechanism. The results show that polypropylene fiberreinforced concrete presents a better performance on crack resistance than ordinary concrete, and the synergism of EVA and polypropylene fiber can improve the anti-cracking ability of concrete further.展开更多
This paper aims to characterize the evolution of the fracture process and the cracking behavior in fortaferro(FF)and polypropylene(PP)fiber-reinforced concrete under the uniaxial compressive loading using experimental...This paper aims to characterize the evolution of the fracture process and the cracking behavior in fortaferro(FF)and polypropylene(PP)fiber-reinforced concrete under the uniaxial compressive loading using experimental analysis and digital image correlation(DIC)on the surface displacement.For this purpose,6 mix designs,including two FF volume fractions of 0.10%,and 0.20%and three PP volume fractions of 0.20%,0.30%,and 0.40%,in addition to a control mix were evaluated according to compressive strength,modulus of elasticity,toughness index,and stress–strain curves.The influence of fibers on the microstructural texture of specimens was analyzed by scanning electron microscope(SEM)imaging.Results show that FF fiber-reinforced concrete specimens demonstrated increased ductility and strength compared to PP fiber.DIC results revealed that the major crack and fracture appeared at the peak load of the control specimen due to brittleness and sudden gain of large lateral strain,while a gradual increase in micro-crack quantity at 75%of peak load was observed in the fiber specimens,which thenbegan to connect with each other up to the final fracture.The accuracy of the results supports DIC as a reliable alternative for the characterization of the fracture process in fiber-reinforced concrete.展开更多
Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties.The concrete specimens with amount content of polypropylene fiber or expansiv...Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties.The concrete specimens with amount content of polypropylene fiber or expansive agent or both of them are prepared.The morphology of specimens is observed by scanning electron microscope,the time when the first crack occurred is recorded through slap test,and the mechanical properties such as compressive strength and impact energies of concrete are measured.The results show that polypropylene fiber in concrete can reduce the shrinkage and delay the first crack,improve the impact resistance obviously,and improve the compressive strength slightly.Expansive agent can compensate the shrinkage and reduce cracks of concrete pavement markedly,and improve the mechanical properties of concrete pavement slightly.The study provides recommendations for cracking control of airport concrete pavement in the future.展开更多
To improve the quality of the steel-concrete composite segment of the box girder,to ensure the compactness of concrete to avoid debonding and to enhance the fatigue strength of concrete are critical to the concrete pr...To improve the quality of the steel-concrete composite segment of the box girder,to ensure the compactness of concrete to avoid debonding and to enhance the fatigue strength of concrete are critical to the concrete preparation for such site. Furthermore,the coordination ability to deformation between steel and concrete is also important because of great difference of the elastic modulus between them. Concrete for the steel-concrete composite segment with high fluidity,excellent crack resistance and low shrinkage was prepared by adding efficient poly-carboxylic water-reducing agent,high quality fly ash and expansion agent to it. The quality of the concrete of the half partial testing block showed that the optimal mix proportion of polypropylene fiber reinforced concrete had achieved expected effect,ensured high quality,thus meeting the requirements of construction.展开更多
基金Funded by National Key R&D Program(No.2016YFC0701003)of Chinathe Fundamental Research Funds for the Central Universities
文摘In order to investigate the synergistic effect of re-dispersible powder-ethylene-vinyl acetate copolymer(EVA) and polypropylene fiber on the crack resistance of concrete under thermal fatigue loading, the compressive strength, ultimate tensile strength, ultimate tensile strain and tensile modulus of elasticity were tested. In addition, ultrasonic method and scanning electron microscope analysis were used to explain the microstructure mechanism. The results show that polypropylene fiberreinforced concrete presents a better performance on crack resistance than ordinary concrete, and the synergism of EVA and polypropylene fiber can improve the anti-cracking ability of concrete further.
文摘This paper aims to characterize the evolution of the fracture process and the cracking behavior in fortaferro(FF)and polypropylene(PP)fiber-reinforced concrete under the uniaxial compressive loading using experimental analysis and digital image correlation(DIC)on the surface displacement.For this purpose,6 mix designs,including two FF volume fractions of 0.10%,and 0.20%and three PP volume fractions of 0.20%,0.30%,and 0.40%,in addition to a control mix were evaluated according to compressive strength,modulus of elasticity,toughness index,and stress–strain curves.The influence of fibers on the microstructural texture of specimens was analyzed by scanning electron microscope(SEM)imaging.Results show that FF fiber-reinforced concrete specimens demonstrated increased ductility and strength compared to PP fiber.DIC results revealed that the major crack and fracture appeared at the peak load of the control specimen due to brittleness and sudden gain of large lateral strain,while a gradual increase in micro-crack quantity at 75%of peak load was observed in the fiber specimens,which thenbegan to connect with each other up to the final fracture.The accuracy of the results supports DIC as a reliable alternative for the characterization of the fracture process in fiber-reinforced concrete.
基金Supported by the High-Level Talent Funding and Construction System of Jiangsu Province(JZ-010,2013ZD12)the China Post-Doctoral Science Foundation(2014M551588,1301057B)the National High-Tech Research and Development Program of China("863"Program)(2009AA03Z508)
文摘Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties.The concrete specimens with amount content of polypropylene fiber or expansive agent or both of them are prepared.The morphology of specimens is observed by scanning electron microscope,the time when the first crack occurred is recorded through slap test,and the mechanical properties such as compressive strength and impact energies of concrete are measured.The results show that polypropylene fiber in concrete can reduce the shrinkage and delay the first crack,improve the impact resistance obviously,and improve the compressive strength slightly.Expansive agent can compensate the shrinkage and reduce cracks of concrete pavement markedly,and improve the mechanical properties of concrete pavement slightly.The study provides recommendations for cracking control of airport concrete pavement in the future.
文摘To improve the quality of the steel-concrete composite segment of the box girder,to ensure the compactness of concrete to avoid debonding and to enhance the fatigue strength of concrete are critical to the concrete preparation for such site. Furthermore,the coordination ability to deformation between steel and concrete is also important because of great difference of the elastic modulus between them. Concrete for the steel-concrete composite segment with high fluidity,excellent crack resistance and low shrinkage was prepared by adding efficient poly-carboxylic water-reducing agent,high quality fly ash and expansion agent to it. The quality of the concrete of the half partial testing block showed that the optimal mix proportion of polypropylene fiber reinforced concrete had achieved expected effect,ensured high quality,thus meeting the requirements of construction.
