Ni/α-Al2O3 catalysts were found to be active in the temperature range 600 ~ 900℃ for both CO2 reforming and partial oxidation of methane.The effects of Ni loading,reaction temperature and feed gas ratio for the com...Ni/α-Al2O3 catalysts were found to be active in the temperature range 600 ~ 900℃ for both CO2 reforming and partial oxidation of methane.The effects of Ni loading,reaction temperature and feed gas ratio for the combination of CO2 reforming and partial oxidation of CH4 over Ni/α-Al2O3 were investigated.Catalysts of xwt%Ni/α-Al2O3(x=2.5,5,8 and 12) were prepared by wet impregnating the calcined support with a solution of nickel nitrate.XRD patterns and activity tests have verified that the 5wt%Ni/α-Al2O3 was the most active catalyst,as compared with the other prepared catalyst samples.An increase of the Ni loading to more than 5wt% led to a reduction in the Ni dispersion.In addition,by combining the endothermic carbon dioxide reforming reaction with the exothermic partial oxidation reaction,the loss of catalyst activity with time on stream was reduced with the amount of oxygen added to the feed.展开更多
制备了负载在Na Y分子筛上的Fe Cu Mn Y复合催化剂,并对其在非均相UV Fe Cu Mn Y H2O2体系中催化氧化4BS染料废水进行了研究.结果表明,非均相UV Fe Cu Mn Y H2O2体系对4BS染料废水的处理具有很高的效率.在基准条件下,反应时间为20min时...制备了负载在Na Y分子筛上的Fe Cu Mn Y复合催化剂,并对其在非均相UV Fe Cu Mn Y H2O2体系中催化氧化4BS染料废水进行了研究.结果表明,非均相UV Fe Cu Mn Y H2O2体系对4BS染料废水的处理具有很高的效率.在基准条件下,反应时间为20min时,废水中4BS的去除率达到了93 7%.与均相UV Fenton体系不同,非均相UV Fe Cu Mn Y H2O2体系在碱性条件下(pH=10 5)仍可高效去除CODCr.动力学研究得到催化氧化4BS废水的模型方程,该模型可以为非均相UV Fe Cu Mn Y H2O2体系处理高色度的实际染料废水提供指导.展开更多
In order to purify oil recovery wastewater from polymer flooding (ORWPF) in tertiary oil recovery in oil fields, advanced treatment of UV/H2O2/O3 and fine filtration were investigated. The experimental results showe...In order to purify oil recovery wastewater from polymer flooding (ORWPF) in tertiary oil recovery in oil fields, advanced treatment of UV/H2O2/O3 and fine filtration were investigated. The experimental results showed that polyacrylamide and oil remaining in ORWPF after the conventional treatment process could be effectively removed by UV/H2O2/O3 process. Fine filtration gave a high performance in eliminating suspended solids. The treated ORWPF can meet the quality requirement of the wastewater-bearing polymer injection in oilfield and be safely re-injected into oil reservoirs for oil recovery.展开更多
文摘Ni/α-Al2O3 catalysts were found to be active in the temperature range 600 ~ 900℃ for both CO2 reforming and partial oxidation of methane.The effects of Ni loading,reaction temperature and feed gas ratio for the combination of CO2 reforming and partial oxidation of CH4 over Ni/α-Al2O3 were investigated.Catalysts of xwt%Ni/α-Al2O3(x=2.5,5,8 and 12) were prepared by wet impregnating the calcined support with a solution of nickel nitrate.XRD patterns and activity tests have verified that the 5wt%Ni/α-Al2O3 was the most active catalyst,as compared with the other prepared catalyst samples.An increase of the Ni loading to more than 5wt% led to a reduction in the Ni dispersion.In addition,by combining the endothermic carbon dioxide reforming reaction with the exothermic partial oxidation reaction,the loss of catalyst activity with time on stream was reduced with the amount of oxygen added to the feed.
文摘制备了负载在Na Y分子筛上的Fe Cu Mn Y复合催化剂,并对其在非均相UV Fe Cu Mn Y H2O2体系中催化氧化4BS染料废水进行了研究.结果表明,非均相UV Fe Cu Mn Y H2O2体系对4BS染料废水的处理具有很高的效率.在基准条件下,反应时间为20min时,废水中4BS的去除率达到了93 7%.与均相UV Fenton体系不同,非均相UV Fe Cu Mn Y H2O2体系在碱性条件下(pH=10 5)仍可高效去除CODCr.动力学研究得到催化氧化4BS废水的模型方程,该模型可以为非均相UV Fe Cu Mn Y H2O2体系处理高色度的实际染料废水提供指导.
文摘In order to purify oil recovery wastewater from polymer flooding (ORWPF) in tertiary oil recovery in oil fields, advanced treatment of UV/H2O2/O3 and fine filtration were investigated. The experimental results showed that polyacrylamide and oil remaining in ORWPF after the conventional treatment process could be effectively removed by UV/H2O2/O3 process. Fine filtration gave a high performance in eliminating suspended solids. The treated ORWPF can meet the quality requirement of the wastewater-bearing polymer injection in oilfield and be safely re-injected into oil reservoirs for oil recovery.