The exfoliation degree of graphite oxide into graphene oxide plays an important role in the massive production method of reduced graphene oxide. It is significant to find a simple and feasible method to analyze the ex...The exfoliation degree of graphite oxide into graphene oxide plays an important role in the massive production method of reduced graphene oxide. It is significant to find a simple and feasible method to analyze the exfoliation degree of graphite oxide. In the present work, graphite oxide was synthesized by a modified Hummers method, and then graphene oxide colloids were obtained by exfoliation of graphite oxide dispersed in de-ionized water. UV-visible spectroscopy was used to characterize the absorption of the graphene oxide colloids, and the concentration of graphene oxide colloids indicated by absorption area of UV-visible spectra was studied. Results show that there is a relatively stable relationship between them, indicating that UV- visible spectroscopy is a potential method for analyzing the exfoliation degree of graphite oxide into graphene oxide.展开更多
The interaction of Eu^3＋-rutin with CT DNA was studied by UV-visible spectroscopy and electrochemistry. All experimental results indicate that the complex binds to DNA by the electrostatic mode and the groove binding...The interaction of Eu^3＋-rutin with CT DNA was studied by UV-visible spectroscopy and electrochemistry. All experimental results indicate that the complex binds to DNA by the electrostatic mode and the groove binding mode. Information such as intrinsic binding costant （ k = 1. 426 × 104 mol·L^-1 ）, and binding numbers （ n = 2）, were determined by cyclic vohammetry and differential pulse vohammetry at glass carbon electrode. Interaction between Eu^3＋ with rutin was also studied by UV-visible spectroscopy.展开更多
In this paper,an absorption spectroscopy measurement method was applied on two atmospheric pressure plasma sources to determine their production of nitric oxide.The concentrations are essential for evaluating the plas...In this paper,an absorption spectroscopy measurement method was applied on two atmospheric pressure plasma sources to determine their production of nitric oxide.The concentrations are essential for evaluating the plasma sources based on the principle of the Dielectric Barrier Discharge（DBD）for applications in plasma medicine.The described method is based on a setup with an electrodeless discharge lamp filled with a mixture of oxygen and nitrogen.One of the emitted wavelengths is an important resonance wavelength of nitric oxide（λ = 226.2 nm）.By comparing the absorption behaviour at the minimum and maximum of the spectral absorption cross section of nitric oxide around that wavelength,and measuring the change in intensity by the absorbing plasma,the concentration of nitric oxide inside the plasma can be calculated.The produced nitric oxide concentrations depend on the pulse duration and are in the range of 180 ppm to 1400 ppm,so that a distance of about 10 cm to the respiratory tract is enough to conform to the VDI Guideline 2310.展开更多
In this work, we developed an analytical method based on UV-visible spectroscopy to determine the concentration of biodiesel from African palm in blends of petrodiesel. Seventy-five samples with biodiesel concentratio...In this work, we developed an analytical method based on UV-visible spectroscopy to determine the concentration of biodiesel from African palm in blends of petrodiesel. Seventy-five samples with biodiesel concentrations between 0-100 wt% were prepared. The spectral fingerprints that were obtained from the analysis of the samples by UV-visible spectroscopy were used to build predictive model using PLS regression. The predictive ability of the models was evaluated through statistical parameters: the standard error of calibration (SEC), the standard error of validation (SEV), the correlation coefficient of calibration (r Cal) and validation (r Val), the ratio (SEC/SEV), the coefficient of determination R2, the paired data Student’s t-test, cross-validation and external validation. The results indicate that the PLS model predicts the concentration of biodiesel from African palm with high precision in mixtures with petrodiesel. The method developed in this study can be applied to determine the concentration of biodiesel African palm in mixtures of petrodiesel in a more rapid and economical way. Moreover, this method has less analytical errors and is more environmentally friendly than the conventional methods.展开更多
UV-Vis absorption and fluorescence spectroscopy are used to test the quality and changes in the composition of extra virgin olive oil (EVOO) and canola oil (CO) with temperature. The increase of temperature caused a c...UV-Vis absorption and fluorescence spectroscopy are used to test the quality and changes in the composition of extra virgin olive oil (EVOO) and canola oil (CO) with temperature. The increase of temperature caused a change in the molecular structures of both types of oils seen as a gradual decrease of intensity amplitudes of absorption and fluorescence signals. A significant alteration occurred at ≈200°C where almost the main spectra of pheophytin-a, b, carotenoids, lutein and vitamin E in EVOO and linoleic acid and oleic acid in CO disappeared. An independent experiment showed the output of laser changes linearly with the input in oil at constant temperature (i.e., room temperature) where the transmission values of ≈33% and ≈75% are determined for EVOO and CO respectively. However, the transmission through a heated oil exhibited a non-linear behaviour which indicates the molecular optical response to thermal changes. The effect of storage time and adulteration of oils were also evaluated.展开更多
Electrochromic materials are of great interest for their potential in eyewear protection and data storage devices, as they change colors in response to electrochemical switching. While many of the systems currently us...Electrochromic materials are of great interest for their potential in eyewear protection and data storage devices, as they change colors in response to electrochemical switching. While many of the systems currently used are based on inorganic materials, organic materials such as triazenes have emerged as viable alternatives due to their unique properties, including optical properties. Triazenes are a class of organic compounds with three consecutive nitrogen atoms in an acyclic arrangement, and they have been used for a variety of applications in medicinal and synthetic chemistry. However, the effects of solvents on the UV-visible absorption spectrum of triazenes have not been fully investigated. The neutral molecules of 3,3-diisopropyl-1-phenyltriazene and 1-(4-chlorophenyl)-3-cyclopentyltriazene in acetonitrile, the UV-visible spectra corresponded respectively to HOMO → LUMO transitions with a large maximum absorption at 299.74 nm (4.1364 eV) and 299.57 nm (4.1387 eV) and the most intense oscillator strength (f = 0.6988) and (f = 0.7372). These results suggest that the electronic transitions of the compounds are highly influenced by the nature of the substituents on the triazene unit, as well as the solvent used in the experiment. The redox couple 0.92 and -0.44 V/Ag/AgCl is attributed to the phenyl group. Compound III showed an oxidation and reduction peak respectively -0.27 and -0.8 V/Ag/AgCl attributed to the phenyl molecule. The study concluded that all three compounds were electroactive and exhibited reversible characteristics with oxidizing/reducing couples. This study aims to contribute to research on the optical properties of triazenes compounds and the application of quantum chemical calculation methods for understanding their molecular structures. By investigating the solute-solvent interactions occurring in the solvation shell of the solutes, we aim to gain insights into the effects of solvents on the UV-visible absorption spectrum of triazenes. Our findings may have implications for the development of functionalized triazenes as potential electrochromic materials.展开更多
The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are ove...The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are overlaps in the methods used by scholars. The Langmuir equation is frequently applied to model the adsorption isotherms of MIPs, providing critical insight into the capacity and affinity of the binding sites. Infrared Spectroscopy (IR) plays a crucial role in identifying the functional groups involved in the imprinting process and confirming the successful formation of specific binding sites. UV-visible spectrophotometry is employed to monitor the absorption characteristics of the polymers, offering data on the interactions between the template molecules and the polymer matrix. Transmission Electron Microscopy (TEM) provides detailed visualization of the internal structure of MIPs at the nanoscale, revealing the morphology and size of the imprinted cavities. Thermogravimetric Analysis (TGA) assesses the thermal stability and composition of the polymers, identifying decomposition patterns that are indicative of the material’s robustness under different conditions. Finally, the Laser Particle Size Analyzer is used to measure the size distribution of the polymer particles, which is critical for determining the uniformity and efficiency of the imprinting process. The six characterization methods discussed in this paper provide a comprehensive understanding of MIP, and it is hoped that in the future, more optimized design solutions will emerge and their applications in various fields will be enhanced.展开更多
The research work was carried out for establishing a new Ultra Violet (UV)— Visible spectroscopy and Reverse phase-Ultra Fast Liquid Chromatography (RP-UFLC) method for the analysis and quantification of a biosimilar...The research work was carried out for establishing a new Ultra Violet (UV)— Visible spectroscopy and Reverse phase-Ultra Fast Liquid Chromatography (RP-UFLC) method for the analysis and quantification of a biosimilar drug, Filgrastim. Filgrastim or recombinant methionyl granulocyte colony stimulating factor (rGCSF) is a glycoprotein. It has a biological action essential for proliferation and differentiation of hematopoetic and progenitor cells. The UV and RP-UFLC work was carried on a Shimadzu UV1800 Spectrophotometer and Shimadzu Prominence LC-20AD UFLC systems, respectively. The <i>λ</i><sub>max</sub> of filgrastim was found to be 215 nm. The correlation coefficient by UV spectroscopy was found to be 0.9994 for the concentration range of 1 to 3 μg/ml in double distilled water. The Reverse phase UFLC was done by using Phenomenex C4 (25 cm × 0.46 cm internal diameter) 15 μ, 300 A° analytical column. The optimized mobile phase for binary elution was Acetonitrile and double distilled water (80:20) with a flow rate of 1 ml/min. The retention time of drug was at 3.2 min. It was observed that the response of the detector was linear in the range of 5 - 15 μg/ml with correlation coefficient value of 0.999. After developing the methods, it was assured for the intended use by validation of the analytical parameters like linearity, accuracy, precision, limit of detection, limit of quantitation, ruggedness and robustness. The results of all the parameters for both the methods were found to be within the acceptance criteria as per the International Council for Harmonisation (ICH) guidelines.展开更多
Nickel nanoparticles （〈10 nm） were success fully synthesized using a reductive method of nickel chloride with sodium borohydride in the ethanol/poly vinylpyrrolidone （PVP） system. The effects of three fac tors, s...Nickel nanoparticles （〈10 nm） were success fully synthesized using a reductive method of nickel chloride with sodium borohydride in the ethanol/poly vinylpyrrolidone （PVP） system. The effects of three fac tors, such as the concentration of the nickel ions, the time of reaction, and the amount of PVP （surfactant）, were discussed. The possible growth process of the particles and optimum reactive conditions was also investigated. The result of transmission electron microscopy （TEM） reveals that these nickel nanoparticles are spherical. The average diameter could be controlled as 25 nm under selected conditions. Highresolution TEM and energydispersive spectroscopy results indicates that the nickel nanoparticles are pure. The UVvisible light absorption spectrum shows that the peaks of nickel nanoparticles moves toward the short wavelength along with the decrease of sizes.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.51102131,81102289)the National Natural Science Foundation of Jiangxi Province(No.20142BAB216033)
文摘The exfoliation degree of graphite oxide into graphene oxide plays an important role in the massive production method of reduced graphene oxide. It is significant to find a simple and feasible method to analyze the exfoliation degree of graphite oxide. In the present work, graphite oxide was synthesized by a modified Hummers method, and then graphene oxide colloids were obtained by exfoliation of graphite oxide dispersed in de-ionized water. UV-visible spectroscopy was used to characterize the absorption of the graphene oxide colloids, and the concentration of graphene oxide colloids indicated by absorption area of UV-visible spectra was studied. Results show that there is a relatively stable relationship between them, indicating that UV- visible spectroscopy is a potential method for analyzing the exfoliation degree of graphite oxide into graphene oxide.
文摘The interaction of Eu^3＋-rutin with CT DNA was studied by UV-visible spectroscopy and electrochemistry. All experimental results indicate that the complex binds to DNA by the electrostatic mode and the groove binding mode. Information such as intrinsic binding costant （ k = 1. 426 × 104 mol·L^-1 ）, and binding numbers （ n = 2）, were determined by cyclic vohammetry and differential pulse vohammetry at glass carbon electrode. Interaction between Eu^3＋ with rutin was also studied by UV-visible spectroscopy.
文摘In this paper,an absorption spectroscopy measurement method was applied on two atmospheric pressure plasma sources to determine their production of nitric oxide.The concentrations are essential for evaluating the plasma sources based on the principle of the Dielectric Barrier Discharge（DBD）for applications in plasma medicine.The described method is based on a setup with an electrodeless discharge lamp filled with a mixture of oxygen and nitrogen.One of the emitted wavelengths is an important resonance wavelength of nitric oxide（λ = 226.2 nm）.By comparing the absorption behaviour at the minimum and maximum of the spectral absorption cross section of nitric oxide around that wavelength,and measuring the change in intensity by the absorbing plasma,the concentration of nitric oxide inside the plasma can be calculated.The produced nitric oxide concentrations depend on the pulse duration and are in the range of 180 ppm to 1400 ppm,so that a distance of about 10 cm to the respiratory tract is enough to conform to the VDI Guideline 2310.
文摘In this work, we developed an analytical method based on UV-visible spectroscopy to determine the concentration of biodiesel from African palm in blends of petrodiesel. Seventy-five samples with biodiesel concentrations between 0-100 wt% were prepared. The spectral fingerprints that were obtained from the analysis of the samples by UV-visible spectroscopy were used to build predictive model using PLS regression. The predictive ability of the models was evaluated through statistical parameters: the standard error of calibration (SEC), the standard error of validation (SEV), the correlation coefficient of calibration (r Cal) and validation (r Val), the ratio (SEC/SEV), the coefficient of determination R2, the paired data Student’s t-test, cross-validation and external validation. The results indicate that the PLS model predicts the concentration of biodiesel from African palm with high precision in mixtures with petrodiesel. The method developed in this study can be applied to determine the concentration of biodiesel African palm in mixtures of petrodiesel in a more rapid and economical way. Moreover, this method has less analytical errors and is more environmentally friendly than the conventional methods.
文摘UV-Vis absorption and fluorescence spectroscopy are used to test the quality and changes in the composition of extra virgin olive oil (EVOO) and canola oil (CO) with temperature. The increase of temperature caused a change in the molecular structures of both types of oils seen as a gradual decrease of intensity amplitudes of absorption and fluorescence signals. A significant alteration occurred at ≈200°C where almost the main spectra of pheophytin-a, b, carotenoids, lutein and vitamin E in EVOO and linoleic acid and oleic acid in CO disappeared. An independent experiment showed the output of laser changes linearly with the input in oil at constant temperature (i.e., room temperature) where the transmission values of ≈33% and ≈75% are determined for EVOO and CO respectively. However, the transmission through a heated oil exhibited a non-linear behaviour which indicates the molecular optical response to thermal changes. The effect of storage time and adulteration of oils were also evaluated.
文摘Electrochromic materials are of great interest for their potential in eyewear protection and data storage devices, as they change colors in response to electrochemical switching. While many of the systems currently used are based on inorganic materials, organic materials such as triazenes have emerged as viable alternatives due to their unique properties, including optical properties. Triazenes are a class of organic compounds with three consecutive nitrogen atoms in an acyclic arrangement, and they have been used for a variety of applications in medicinal and synthetic chemistry. However, the effects of solvents on the UV-visible absorption spectrum of triazenes have not been fully investigated. The neutral molecules of 3,3-diisopropyl-1-phenyltriazene and 1-(4-chlorophenyl)-3-cyclopentyltriazene in acetonitrile, the UV-visible spectra corresponded respectively to HOMO → LUMO transitions with a large maximum absorption at 299.74 nm (4.1364 eV) and 299.57 nm (4.1387 eV) and the most intense oscillator strength (f = 0.6988) and (f = 0.7372). These results suggest that the electronic transitions of the compounds are highly influenced by the nature of the substituents on the triazene unit, as well as the solvent used in the experiment. The redox couple 0.92 and -0.44 V/Ag/AgCl is attributed to the phenyl group. Compound III showed an oxidation and reduction peak respectively -0.27 and -0.8 V/Ag/AgCl attributed to the phenyl molecule. The study concluded that all three compounds were electroactive and exhibited reversible characteristics with oxidizing/reducing couples. This study aims to contribute to research on the optical properties of triazenes compounds and the application of quantum chemical calculation methods for understanding their molecular structures. By investigating the solute-solvent interactions occurring in the solvation shell of the solutes, we aim to gain insights into the effects of solvents on the UV-visible absorption spectrum of triazenes. Our findings may have implications for the development of functionalized triazenes as potential electrochromic materials.
文摘The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are overlaps in the methods used by scholars. The Langmuir equation is frequently applied to model the adsorption isotherms of MIPs, providing critical insight into the capacity and affinity of the binding sites. Infrared Spectroscopy (IR) plays a crucial role in identifying the functional groups involved in the imprinting process and confirming the successful formation of specific binding sites. UV-visible spectrophotometry is employed to monitor the absorption characteristics of the polymers, offering data on the interactions between the template molecules and the polymer matrix. Transmission Electron Microscopy (TEM) provides detailed visualization of the internal structure of MIPs at the nanoscale, revealing the morphology and size of the imprinted cavities. Thermogravimetric Analysis (TGA) assesses the thermal stability and composition of the polymers, identifying decomposition patterns that are indicative of the material’s robustness under different conditions. Finally, the Laser Particle Size Analyzer is used to measure the size distribution of the polymer particles, which is critical for determining the uniformity and efficiency of the imprinting process. The six characterization methods discussed in this paper provide a comprehensive understanding of MIP, and it is hoped that in the future, more optimized design solutions will emerge and their applications in various fields will be enhanced.
文摘The research work was carried out for establishing a new Ultra Violet (UV)— Visible spectroscopy and Reverse phase-Ultra Fast Liquid Chromatography (RP-UFLC) method for the analysis and quantification of a biosimilar drug, Filgrastim. Filgrastim or recombinant methionyl granulocyte colony stimulating factor (rGCSF) is a glycoprotein. It has a biological action essential for proliferation and differentiation of hematopoetic and progenitor cells. The UV and RP-UFLC work was carried on a Shimadzu UV1800 Spectrophotometer and Shimadzu Prominence LC-20AD UFLC systems, respectively. The <i>λ</i><sub>max</sub> of filgrastim was found to be 215 nm. The correlation coefficient by UV spectroscopy was found to be 0.9994 for the concentration range of 1 to 3 μg/ml in double distilled water. The Reverse phase UFLC was done by using Phenomenex C4 (25 cm × 0.46 cm internal diameter) 15 μ, 300 A° analytical column. The optimized mobile phase for binary elution was Acetonitrile and double distilled water (80:20) with a flow rate of 1 ml/min. The retention time of drug was at 3.2 min. It was observed that the response of the detector was linear in the range of 5 - 15 μg/ml with correlation coefficient value of 0.999. After developing the methods, it was assured for the intended use by validation of the analytical parameters like linearity, accuracy, precision, limit of detection, limit of quantitation, ruggedness and robustness. The results of all the parameters for both the methods were found to be within the acceptance criteria as per the International Council for Harmonisation (ICH) guidelines.
基金supported by the National Natural Science Foundation of China(Nos.51272025 and 50872011)the National Key Basic Research Development Plan(973 Program)(No.2007CB613608)the New Century Excellent Researcher Award Program from Ministry of Education of China(No.NCET-08-0732)
文摘Nickel nanoparticles （〈10 nm） were success fully synthesized using a reductive method of nickel chloride with sodium borohydride in the ethanol/poly vinylpyrrolidone （PVP） system. The effects of three fac tors, such as the concentration of the nickel ions, the time of reaction, and the amount of PVP （surfactant）, were discussed. The possible growth process of the particles and optimum reactive conditions was also investigated. The result of transmission electron microscopy （TEM） reveals that these nickel nanoparticles are spherical. The average diameter could be controlled as 25 nm under selected conditions. Highresolution TEM and energydispersive spectroscopy results indicates that the nickel nanoparticles are pure. The UVvisible light absorption spectrum shows that the peaks of nickel nanoparticles moves toward the short wavelength along with the decrease of sizes.
