Synthesis of a Novel UV-curable Prepolymer Polypropyleneglycol Diglycidyl Ether Diacrylate

A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were in the following： the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ~C, and the molar ratio of PPGGE to AA was 1：2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized PPGGEA to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 29.99 MPa of tensile strength, 834.27 MPa of the Young＇s modulus and 5.66% of elongation at tear.

Synthesis and Properties of UV-curable Hyperbranched Polyurethane and Its Application in the Negative-type Photoresist

UV-curable hyperbranched polyurethane （UV-HBPU） containing carboxyl groups was synthesized from isophorone diisocyanate （IPDI）, diethanolamine （DEOA）, polyethylene glycol （PEG-400）, hydroxyethyl acrylate （HEA）, and 2,2-his （hydroxymethyl） propionic acid （DMPA）. The UV-HBPU was used as a negative-type photoresist for a printed circuit board （PCB）. Fourier-transform infrared spectroscopy （FTIR） and proton nuclear magnetic resonance （1HNMR） spectroscopy of UV-HBPUs indicated that the synthesis was successful. Differential scanning calorimetry （DSC） and thermogravimetric analysis （TGA） showed that the thermal stability of the UV-HBPUs decreased as the HEA content increased. The polymer exhibited excellent photoresist properties, and the resolution of circuits based on this negative-type photoresist reached 10 μm.

Synthesis of a Novel UV-curable Prepolymer Hexanediol Diglycidyl Ether Diacrylate and Its Cured Film Tensile Property

A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimal synthetic conditions were that the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ℃, and the molar ratio of HDGE to AA was 1︰2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-curing initiator was added to the synthesized HDGEA to prepare a kind of UV-curing coating. The mechanical properties of the UV-cured films were determined, giving 31.87 MPa of tensile strength, 871.88 MPa of Young＇s modulus and 6.77% of elongation at tear.

Preparation and Properties of Aqueous SCNTs Dispersion based on A UV-curable Polymeric Dispersant

A novel photosensitive copolymer P（SS-co-AA-g-GMA）（PSAG） was synthesized and utilized to noncovalently functionalize pristine single-walled carbon nanotubes（SCNTs）. PSAG was highly effective for the solubilization of SCNTs in water and validated by UV-vis absorption spectra experiments, resulting in homogeneous and stable PSAG-SCNT aqueous dispersion. The microstructure of SCNTs was observed through Raman spectroscopy and transmission electron microscopy. In addition, compared with the two common polymeric dispersants of Triton X-100 and PSS, PSAG demonstrated more effective performances for dispersing SCNTs under identical conditions. Furthermore, the photosensitive PSAG-SCNTs can be crosslinked after UV irradiation, leading to significant improvement in the water resistance of SCNT films. UV-cured films can be transferred to plastic wrap to form a flexible film with high electrical conductivity.

Synthesis of a Novel UV-Curable Diluent Benzyl Glycidyl Ether Acrylate and Its Application

A novel UV-curable diluent benzyl glycidyl ether acrylate(BGEA) was synthesized by utilizing benzyl glycidyl ether(BGE) and acrylic acid(AA) as starting materials,N,N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor.The optimum synthetic conditions were that the concentration of N,N-dimethylbenzylamine was 0.90% of reactants by weight,the concentration of p-hydroxyanisole was 0.20% of reactants by weight,the reaction temperature was 90-100℃,and the molar ratio of BGE to AA was 1.00:1.10.The experiment shows that BGEA is a kind of good diluent.The mechanical properties of the UV-cured films with BGEA as diluent to prepare UV-curing coating were superior to that of the UV-cured films with butyl acrylate as diluent to prepare UV-curing coating.

A Photosensitive Copolymer for UV-curable Electrodeposition Coatings

A series of photosensitive random copolymers （UPDHES） were prepared by introducing acrylate groups onto the side chain of the copolymer backbone of N, N-domethyl amimethyl methacrylate （DMAEMA）, 2-hydroxypropyl acrylate （HEA）, 2-ethylhexyl acrylate （EHA）, and styrene （St） （PDHES）. The molecular structure of UPDHES was characterized by FTIR, 1HNMR and GPC. The photopolymerization kinetics of UPDHES with different C=C content was investigated using real time FTIR in which it was found that the UPDHES system had notable photosensitivity. The effect of C=C content on the properties of cured films were studied by evaluating various film properties such as thermal stability, glass transition temperature and tensile properties. The thermal degradation of cured films was investigated via thermogravimetric analysis/infrared spectrometry （TGA-IR）. Thus a series of UV-curable electrodeposition coatings with good photosensitivity and mechanical properties were prepared from a low-cost photosensitive random copolymer.

Synthesis of a novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate and its cured film tensile property

A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.

Synthesis of A Novel UV-curable Oligmer 1,4-cyclohexanedimethanol Glycidyl Ether Acrylate and Study on Its UV-curing Properties

A novel UV-curable oligmer 1,4-cyclohexanedimethanol glycidyl ether acrylate（CHDMGEA） was synthesized by utilizing 1,4-cyclohexanedimethanol glycidyl ether（CHDMGE） and acrylic acid（AA） as starting materials, triphenyl phosphine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were that the concentration of triphenyl phosphine was 0.90% of reactants by weight, the concentration of p-hydroxyanisole was 0.20% of reactants by weight, the reaction temperature was 90-100 ℃, and the molar ratio of CHDMGE to AA was 0.5：1.1. The experimental results show that CHDMGEA is a kind of good UV-curable oligmer. The impact resistance of the UV-cured films with CHDMGEA as oligmer to prepare UV-curing coating was superior to that of the UV-cured films with bisphenol A diglycidyl ether diacrylate（BPGEA） as oligmer to prepare UV-curing coating.

Fabrication of UV-Curing Linalool-Polysiloxane Hybrid Films with High Refractive Index and Transparency

In this article,a series of high refractive indices(1.50-1.53)thiol phenyl polysiloxane(TPS)were synthesized via hydrolytic sol-gel reaction.The Fourier transform infrared spectra(FT-IR)and nuclear magnetic resonance spectra(NMR)results showed that TPS conformed to the predicted structures.Natural terpene linalool was exploited as photocrosslinker to fabricate UV-curing linalool-polysiloxane hybrid films(LPH)with TPS via photoinitiated thiol-ene reaction.LPH rapidly cured under UV irradiation at the intensity of 80 mW/cm^(2) in 30 s,exhibiting good UV-curing properties.The optical transmittance of LPH in the wavelength of 300-800 nm was over 90%,exhibiting good optical transparency.The water contact angle and water vapor permeability results showed that the introduction of phenyl groups enhance the hydrophobicity and water vapor barrier properties of LPH.The results indicated the potential of LPHs in the applications of optical functional coatings.

Arrayed Lensed Fibers Collectively Fabricated Utilizing UV-Curable Fluorinated Polymer

A novel fabrication method for lensed fiber array has been proposed utilizing UV-curable fluorinated polymer, whose refractive index is matched to fused silica. The structure is composed of three segments; single mode fiber, coreless silica fiber and UV-curable polymer lens-tip. Flexible control of the curvature of lens-tip was realized by control of deposited volume of the liquid polymer and free-space interconnection performances are characterized.

UV-curable adhesive microsphere whispering gallery mode resonators

We report the fabrication and optical characterization of spherical whispering gallery mode(WGM) resonators made from ultraviolet(UV)-curable adhesive. The fabricated microspheres have good sphericity and surface smoothness, and can directly adhere to the tip of half-tapered fibers for easy manipulation. WGMs are e?ciently excited in the microsphere using an evanescent field of the tapered silica optical fibers. Resonances with quality factors of 1.3×10 5 are observed. The dependence of wavelength shifts of WGM resonances on the input light powers shows that the resonant wavelength of the proposed microsphere resonators can be tuned thermo-optically.

Synthesis and Application of UV-curable Phosphorous-Containing Acrylated Epoxidized Soybean Oil-based Resins

A novel phosphorous-containing acrylated epoxidized soybean oil-based(P-AESO)resin was developed via the ring-opening reaction of epoxidized soybean oil(ESO)with diphenylphosphinic chloride(DPPC),followed by acrylation of the resulting groups.The chemical structure was characterized by Fourier transform infrared spectroscopy(FT-IR),and ^(1)H nuclear magnetic resonance(^(1)H NMR).Subsequently,the viscosity and volumetric shrinkage of the obtained P-AESO resins were studied.Then the oligomer was formulated into UV-curable coatings,and the mechanical,thermal,and coating properties of the resulting UV-cured bioresins were studied by tensile testing,dynamic mechanical thermal analysis(DMA),thermogravimetric analysis(TGA)coupled with FT-IR spectroscopy(TGA-FT-IR),hardness,adhesion,pencil hardness and chemical resistance.Furthermore,the UV-curing behavior of the P-AESO resin was determined by real-time realtime infrared(RT-IR).Meanwhile,compared with coating from acrylated epoxidized soybean oil(AESO),the P-AESO system coatings showed better volumetric shrinkage,excellent adhesion,and enhanced thermal and glass transition temperature(Tg)while maintaining reasonably final C=C conversions and cross-link density.For instance,the obtained P-AESO/trimethylolpropanetriacrylate(TMPTA)20 material possessed a volumetric shrinkage of 4.1%,Tg of 115.6℃,char yield of 9.47%,and final C=C conversions of 81.4%respectively,which exhibited superior values than that of the AESO/TMPTA20 material.The improvement of the P-AESO coating performances could contribute to the architectures that combined the structural features of phosphorous-containing rigid benzene.The developed P-AESO resin is promising for applications in the UV-curable coatings.

Synthesis and Characterization of Novel UV-curable Fluorinated Polyurethane-acrylate Copolymer

A series of UV-curable fluorinated polyurethane-acrylate（PUA） has been developed by incorporating octafluoropentyl alcohol into the segment of UV-curable polyurethane-acrylate to improve the thermal property and surface property of the copolymer material. The structures of the synthesized polymers were characterized by Fourier transform infrared（FTIR） spectrometry. In order to find out the effect of incorporated fluorine on the UV-cured films, the properties of the UV-cured films were tested through contact angle, water absorption, and thermogravimetric analysis （TGA）. The fractured-surface morphologies of the UV-cured coatings were investigated by scanning electron microscopy（SEM）. With increasing the content of fluorine segments, the contact angle of the UV-cured films increased and the water absorption decreased, suggesting the fluorine segments migrated and formed a fluorine-covered surface to avoid water penetration. The observation of the fractured-surface morphology through SEM test showed that the fluori- nated UV-cured films gained rough fractured-surface compared with the pure UV-cured polyacrylate film, demonstrating the migrating of the fluorine segments. The TGA curves show that the fluorinated UV-cured films gained higher thermal degradation temperature than the virgin UV-cured polyacrylate film. And as increasing the fluorine content, the thermal degradation temperature increased. These phenomena could be reasonably explained by the enrichment of fluorinecontained segment on the surface of the film and the high thermal property due to fluorine atom.

SYNTHESIS AND PROPERTIES OF UV-CURABLE POLYSILOXANE METHACRYLATE OBTAINED BY ONE-STEP METHOD

In this study, a UV-curable polysiloxane methacrylate （PSMA） was synthesized by a one-step method. The reaction was catalyzed by chloroplatinic acid between polymethylhydrosiloxane （PMHS） and hydroxyethyl methacrylate （HEMA）, as proved by FTIR and ^1H-NMR. The preliminary results indicate that the obtained UV-cured PSMA film has very good thermal stability, excellent transparency and satisfactory tensile strength. Our work provides a simple but efficient way to prepare UV-curable PSMA, which may find potential applications in UV-curing optical fiber, metal and glass coating and other fields.

Research Progress of Tung Oil/UV Photocomposite Curing Material

Tung oil(TO)/ultraviolet(UV)photo-composite curing material possesses the characteristics of low curing temperature,low material shrinkage and low environmental pollution.Accordingly,this material must be developed and utilized with the conjugated double bonds contained in the long chain of the main structure(α-tung acid)molecules in the refined TO.The aforementioned material can be chemically modified using a variety of chemical methods to develop a new TO-based UV photocurable material due to its unique chemical properties.This work reviews the research progress of TO/UV photo-composite curing materials in recent years.Firstly,the chemical structure and application of TO and UV Photocatalysis Technology were briefly introduced.Secondly,the research status of novel TO/UV photo-composite curing materials developed by the Diels-Alder reaction was discussed.The method and curing effect of the UVcuring system constructed by other chemically modified TO were also discussed.Thereafter,the application of TO in industrial production is introduced from four directions:the application of TO in biodiesel,the application in synthetic resin,the application in self-healing coating and microcapsules and other applications.Finally,the research and application prospects of TO/UV photo-composite curing materials were presented.

MODIFIED ULTRAVIOLET-CURABLE WATER DISPERSIBLE POLYURETHANE-ACRYLATES

Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolymers based on PEG having higher M-n values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane(CL-20)as the main explosive.Then the explosive inkdirect writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still type.The CL-20 based UV-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kj/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,whichis about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm^(3).

Studies on the Syntheses and Properties of UV-sensitive Organosilicon Monomers and Polymers

Photosensitive organosilicon monomers and polymers containing furylacrylate, cinnamate or methacrylate groups were synthesized. The chemical structure of these organosilicon monomers were confirmed by 1H NMR and elemental analysis.The curing rates of these photosensitive polysiloxanes were also determined, all of them show a good UV-sensitivity. The UV-sensitivity of polysiloxanes containing pendent furylacrylates are comparable to that of polysiloxanes with either pendent cinnamate or pendent methacrylate groups.

Synthesis of A Novel Photosensitive Prepolymer with Trimethylolpropane Triglycidylether and Acrylic Acid as Starting Materials

A novel photosensitive prepolymer of trimethylolpropane triglycidylether triacrylate was synthesized by utilizing trimethylolpropane triglycidylether and acrylic acid as two starting materials, triphenyl phosphine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthesis conditions were that the concentration of triphenyl phosphine was 0.85wt% of reactants, the concentration of p-hydroxyanisole was 0.3wt% of reactants, and the reaction temperature was at 90-110 ℃. Benzil dimethyl ketal of a UV-cured initiator was added to the synthesized trimethylolpropane triglycidylether triacrylate to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 28.43 MPa of tensile strength, 965.59MPa of (Young's) modulus and 4.10% of elongation at tear.

Preparation and Photocatalytic Property of Porous TiO_2 Film with Net-like Framework

By the UV-curing method, a porous TiO2 film with net-like framework has been prepared. The characterization results of the porous TiO2 film by means of SEM, TEM, XRD, and N2 adsorption-desorption analysis show that the net-like framework of the porous TiO2 film is composed of TiO2 nanoparticles, forming three dimensional porous structure. The porous TiO2 film exhibits higher photocatalytic activity for the degradation of methylene blue（MB） dye compared with the conventional dense TiO2 film.