The pH dependence of the extrapolated shear yield stress for Alcoa A16 a-Al2O3 suspensions at the powder volume fraction of 0.27 with and without addition of both polyvinyl alcohol (PVA) and polyethylene glycol (PEG) ...The pH dependence of the extrapolated shear yield stress for Alcoa A16 a-Al2O3 suspensions at the powder volume fraction of 0.27 with and without addition of both polyvinyl alcohol (PVA) and polyethylene glycol (PEG) each at fixed 0.18% of the powder mass was studied. With the polymer added, the full deflocculation of the suspension shifts from about pH=4 to around pH=1.5, at which the minimum value of shear yield stress is higher than that at pH=4. The addition of both PVA and PEG was found to prevent the filter cake from cracking.展开更多
Variation of plastic viscosity and extrapolated shear yield stress with the concentration of Dispex A40 for the concentrated Alcoa A16 alpha -Al2O3 suspensions at 0.27 powder volume fraction was investigated at 294 K....Variation of plastic viscosity and extrapolated shear yield stress with the concentration of Dispex A40 for the concentrated Alcoa A16 alpha -Al2O3 suspensions at 0.27 powder volume fraction was investigated at 294 K. An optimum level of Dispex A40 for full deflocculation is found to be at 0.18% mass fraction of the powder, at which the rheological behaviour shows little different to that of adjusting the pH to 4 to obtain full deflocculation. It is demonstrated that the shear stress drop can roughly work as an index for the thixotropy in particular fixed conditions, and consequently an index for the deflocculation as the shear stress drop becomes larger when the level of the flocculation increases, and vice versa. It is also found that the addition of Dispex A40 can prevent the filter cakes from cracking, whereas the cakes at various pH values with polyvinyl alcohol as a sole polymer normally develop cracking during drying.展开更多
PMMA wrapped alumina siloxane gel was obtained by using poly (methyl methacrylate) (PMMA) to wrap alumina siloxane sol which was made from water glass, aluminum nitrate and α methacrylic acid. Meanwhile, rare eart...PMMA wrapped alumina siloxane gel was obtained by using poly (methyl methacrylate) (PMMA) to wrap alumina siloxane sol which was made from water glass, aluminum nitrate and α methacrylic acid. Meanwhile, rare earth ions were used to dope in the course of reaction, and stable suspensions was produced by putting PMMA wrapped microcapsule powder doped with rare earths into methy silicon oil. It is found that its electrorheological (ER) effect improves strikingly after loading electric field. At a certain concentration, the immediate viscosity increases from 95 to 178 Pa·s compared to the system without doping.展开更多
文摘The pH dependence of the extrapolated shear yield stress for Alcoa A16 a-Al2O3 suspensions at the powder volume fraction of 0.27 with and without addition of both polyvinyl alcohol (PVA) and polyethylene glycol (PEG) each at fixed 0.18% of the powder mass was studied. With the polymer added, the full deflocculation of the suspension shifts from about pH=4 to around pH=1.5, at which the minimum value of shear yield stress is higher than that at pH=4. The addition of both PVA and PEG was found to prevent the filter cake from cracking.
文摘Variation of plastic viscosity and extrapolated shear yield stress with the concentration of Dispex A40 for the concentrated Alcoa A16 alpha -Al2O3 suspensions at 0.27 powder volume fraction was investigated at 294 K. An optimum level of Dispex A40 for full deflocculation is found to be at 0.18% mass fraction of the powder, at which the rheological behaviour shows little different to that of adjusting the pH to 4 to obtain full deflocculation. It is demonstrated that the shear stress drop can roughly work as an index for the thixotropy in particular fixed conditions, and consequently an index for the deflocculation as the shear stress drop becomes larger when the level of the flocculation increases, and vice versa. It is also found that the addition of Dispex A40 can prevent the filter cakes from cracking, whereas the cakes at various pH values with polyvinyl alcohol as a sole polymer normally develop cracking during drying.
文摘PMMA wrapped alumina siloxane gel was obtained by using poly (methyl methacrylate) (PMMA) to wrap alumina siloxane sol which was made from water glass, aluminum nitrate and α methacrylic acid. Meanwhile, rare earth ions were used to dope in the course of reaction, and stable suspensions was produced by putting PMMA wrapped microcapsule powder doped with rare earths into methy silicon oil. It is found that its electrorheological (ER) effect improves strikingly after loading electric field. At a certain concentration, the immediate viscosity increases from 95 to 178 Pa·s compared to the system without doping.
