Wearable UWB Antenna-Based Bending and Wet Performances for Breast Cancer Detection

This paper proposed integrating the communication system on the garment,which can be utilized to detect breast cancer at an early stage by using an ultra-wideband(UWB)wearable antenna.Breast cancer is an abnormal cell that is located in the breast tissue.Early detection of breast cancer plays an important role,and it helps in the long term for all women.The proposed UWB wearable antenna successfully operates at 3.1-10.6 GHz under an acceptable reflection coefficient of−10 dB.The fabricated wearable antenna was made from Shieldit Super and felt both conductive and nonconductive wearable materials.Few measurement studies of bending angles have been carried out that covered 2°,4°,6°,8°,and 10°.In addition,the performance of UWB antennas in wet environments is studied in four stages:in water,instantly wet,nearly dry,and entirely dry.There is good agreement between the measured and simulated outcomes.Based on the experimental results,the proposed antenna could be helpful for a home breast cancer detection system.

A Frequency Selective Surface Loaded UWB Antenna for High Gain Applications

This paper presents the design of wideband and high gainFrequency Selective Surface(FSS)loaded antenna for ultra-wideband(UWB)wireless applications requiring high-gain.The antenna consists of a monopole and an FSS reflector.Initially,a conventional rectangular monopole antenna is modified using slot and stub to achieve wide operational bandwidth and size reduction.This modified antenna shows 50%miniaturization compared to a primary rectangular monopole,having a wide impedance bandwidth of 3.6-11.8 GHz.Afterward,an FSS is constructed by the combination of circular and square ring structures.The FSS array consisting of 8×8-unit cells are integrated with the antenna as a reflector to enhance the performance of the proposed miniaturized UWB antenna.The loading of FSS results in an improvement of at least 4 dBi gain in the entire operational bandwidth.Moreover,the antenna’s bandwidth is also increased at the lower frequency band due to the presence of the FSS.A prototype of the antenna is fabricated and tested to verify the simulation results.The simulation and measurement results show that the antenna offers a wideband-10 dB impedance bandwidth ranging from 2.55-13GHz with a stable peak gain of 8.6 dBi and retains the radiation pattern stability.

Optimization of band-notched UWB antenna using micro-genetic algorithm combined with FDTD

The micro-genetic algorithm (MGA) optimization combined with the finite-difference time-domain (FDTD) method is applied to design a band-notched ultra wide-band (UWB) antenna. A U-type slot on a stepped U-type UWB monopole is used to obtain the band-notched characteristic for 5 GHz wireless local area network (WLAN) band. The measured results show that voltage standing wave ration (VSWR) less than 2 covers 3.1-10.6 GHz operating band and VSWR more than 2 is within 5.150-5.825 GHz notched one with the highest value of 5.6. Agreement among the calculated, HFSS simulated and measured results validates the effiectiveness of this MGA-FDTD method, which is efficient for UWB antennas design.

DESIGN OF CPW-FED ASYMMETRIC SLOT UWB ANTENNA FOR WIRELESS APPLICATION

A compact Ultra-WideBand(UWB) slot antenna is presented in this paper. The slot is modified rectangular in shape and asymmetrically cut in the ground plane. A hexagonal patch with two stepped CoPlanar Waveguide(CPW) feed is used to excite the slot. Wider impedance bandwidth is achieved due to the extra inductive reactance created by the asymmetric slot which neutralizes the capacitive reactance of the hexagonal patch. The measured impedance bandwidth of the proposed antenna is 11.85 GHz(2.9–14.75 GHz). The radiation patterns of the proposed antenna are obtained and found to be omni-directional in H-plane and bi-directional in E-plane.

The Design of UWB Antenna for Mobile Phone and the Antenna Influence on Human Head Model

In order to improve the performance of the antenna at low frequency,short circuit branch and coupling feed structure are introduced into the folded broadband single antenna in this paper,then resonant frequency is merged into the antenna using method of stagger tuning,finally,a UWB antenna is designed to w ork betw een 800 MHz ~ 2700 MHz. Analysis are conducted to determine the antenna's properties. The short-circuit w ire location,feeding point location and the length of folded strip are discussed in detail. The SAR is calculated by HFSS simulation softw are w hile the antenna is close to a 3D human head model. The research results show that the antenna can cover eight commonly used commercial frequency bands at present,and electromagnetic radiation of the antenna has tiny influence on the human head model.

Analysis and design of compact printed monopole UWB antennas with multiple notched bands

This paper presents three compact ultra-wideband(UWB)antennas fed by coplanar waveguide(CPW).The proposed antennas consist of a planar circular patch monopole UWB antenna and multiple etched slots on the feed line.Simulation by Ansoft high frequency structure simulator(HFSS)10.0 shows that the in-band impedances are quite stable and satisfactory.Rejected narrow frequency bands are further obtained within the wideband width by inserting U-shaped slots into the fed line of the antennas.The antennas have a dimension of 50mm by 40mm by 1.5mm.The simulation and measurement results show that the proposed antennas have stable directional radiation patterns,very low profile and low fabrication cost,which are suitable for the UWB system.

New band-notched UWB antenna

A simple and compact ultra wideband （UWB） printed monopole antenna with band-notched performance is proposed in this paper. The antenna is partially grounded so that the Q value is depressed and the impedance bandwidth is broadened. A small strip bar is loaded on each arm of the similar U-shaped radiator. The impedance bandwidth of the antenna overlap with IEEE 802.11a is rejected consequently. The geometry parameters of the antenna are investigated and optimized with HFSS. The measured bandwidth of the proposed antenna occupies about 7.89 GHz covering from 3.05 GHz to 10.94 GHz with expected notched band from 4.96 GHz to 5.98 GHz. A quasi-omnidirectional and quasi-symmetrical radiation pattern in the whole band is also obtained. As a result, a UWB wireless communication system can be simplified with the band-notched UWB antenna presented.

A U-Shaped UWB Antenna with Band-Notched Performance

An ultra-wideband antenna with controllable band-notched is presented. Two semi-ellipses with different radiuses are subtracted to result in the main patch. By varying inner and outer radiuses, much more enhancement in bandwidth occurred. A U-shaped slot is used to make band-stop performance. Measured S11 is ≤-10 dB over 2.3 - 5 GHz and 6.1 - 15.1 GHz.

Triple Notched Band Characteristics UWB Antenna Using C-Shaped Slots and Slot-Type Capacitively-Loaded Loop (CLL)

Ultra wide bands antennas with notched bands characteristics have recently been considered for efficient communication between devices. In this paper, a compact ultra-wideband antenna (UWB) for UWB applications with triple bandnotched characteristics is presented. The proposed antenna consists of a square patch with four truncated corners and a partial ground plane with a rectangular slit. The operation bandwidth of the designed antenna is from 2.66 GHz to more than 13.5 GHz. Band-notched characteristics of antenna to reject the frequency band of 3.18 - 3.59 GHz and 4.70 - 5.88 GHz, is realized by inserting two C-shaped slots in the patch, the third band of 9.54 - 12.22 GHz is achieved by slottype capacitively-loaded loop (CLL) inserted in the patch near the feed line. Details of the proposed antenna design and simulated results are presented and discussed.

4-Port Octagonal Shaped MIMO Antenna with Low Mutual Coupling for UWB Applications

A4-port multiple-input multiple-output(MIMO)antenna exhibiting lowmutual coupling andUWBperformance is developed.The octagonal-shaped four-antenna elements are connected with a 50microstrip feed line that is arranged rotationally to achieve the orthogonal polarization for improving the MIMO system performance.The antenna has a wideband impedance bandwidth of 7.5GHz with S11<−10 dB from(103.44%)3.5–11GHz and inter-element isolation higher than 20 dB.Antenna validation is carried out by verifying the simulated and measured results after fabricating the antenna.The results in the form of omnidirectional radiation patterns,peak gain(≥4 dBi),and Envelope Correlation Coefficient(ECC)(≤0.01)are extracted to validate the suggested antenna performance.Aswell,time-domain analysis was investigated to demonstrate the operation of the suggested antenna in wideband applications.Finally,the simulated and experimental outcomes have almost similar tendenciesmaking the antenna suitable for its use in UWBMIMOapplications.

Miniaturization Planar Monopole Antenna for UWB Applications

Miniaturization and compact printed planar monopole antenna coplanar Waveguide CPW/microstrip feed line three half semi-circular （3HSC） with similar ground plane is presented, design, simulation, fabrication and tested experimentally for Ultra-Wideband （UWB） eommnnication application especially for WLAN and HIPERLAN/2 WLAN. The antenna design has a far from the traditional antennas such as a rectangular, circular, elliptical etc. Generating original planar antenna has been investigated to be an effect the combine geometry shapes of the radiation element part with the same geometry shapes of the slots in the ground plane. The simulation and measuring results have a good agreement, large bandwidth and radiation pattern behavior an omni-directional with stable gain has been obtained.

Novel Planar Monopole Antenna for UWB Applications

Miniaturization and compact Novel printed planar monopole antenna line feed three half semi-elliptical （3HSE） with similar ground plane is presented, design, simulation, fabrication and tasted experimentally for Ultra-Wideband （UWB） communication application especially for WLAN and HIPERLAN/2 WLAN. Generating original planar antenna has been investigated to be an effect the combine geometry shapes of the radiation element part with the same geometry shapes of the slots in the ground plane. The prototype antenna is etched on a Roger TMM4 substrate with the size 25×25× 1.575 mm3 and optimized to operate over frequency band from 3.6-20 GHz, （BW 16.5 GHz）, （FBW is 〉 140.42%）. The simulation and measuring results have a good agreement, large bandwidth and radiation pattern behavior an omni-directional with stable gain rich to 5 dB.

The Impact of Substrate Materials to the Design of UWB Modern Antennas

The theory of microstrip antennas has motivated us to design a highly improved gain antenna under this category. It is a microstrip monopole antenna characterized by omni-directional radiation as well as a high radiation gain. A review of different methodologies to designing antennas with broad/ultra-wide band performance for various applications is enriched by our original antenna design. This is an original model analyzed over different substrate materials and finally optimized for the bandwidth of (3.3 - 5.8) GHz just below ?10 dB of return loss (RL). The antenna is judged for high gain when the ground plane size is reduced to nearly half that of substrate. The impact of the substrate materials is discussed in this article. The master design tool is Ansoft High Frequency Simulator Structure (HFSS), one of Finite Element Method (FEM) based software tools. The antenna would be printed on a 1.524 mm thick Rogers (RO3003C) substrate;overall size of 33.4 × 33.4 squared millimeters. At the optimal resonance frequency of 3.8 GHz, simulation results perfectly agree with the standards of UWB antennas, with a high radiation gain and impedance matching status.

High Gain of UWB Planar Antenna Utilising FSS Reflector for UWB Applications

In this paper,a high gain and directional coplanarwaveguide(CPW)-fed ultra-wideband(UWB)planar antenna with a new frequency selective surface(FSS)unit cells design is proposed for UWB applications.The proposed UWB antenna was designed based on the Mercedes artistic-shaped planar(MAP)antenna.The antenna consisted of a circular ring embedded with three straight legs for antenna impedance bandwidth improvement.The modelled FSS used the integration of a two parallel conductive metallic patch with a circular loop structure.The FSS provided a UWB stopband filter response covering a bandwidth of 10.5 GHz,for frequencies from 2.2 to 12.7 GHz.The proposed FSS had a compact physical dimension of 5 mm×5 mm×1.6 mm,with a printed array of 19×19 FSS unit cells.The FSS unit cells were printed on only one side of the dielectric FR4 substrate and placed as a sandwich between the antenna and the reflector ground plane.An equivalent circuit configuration(ECC)was used to verify the FSS unit cell structure’s performance.The simulated results indicated that the UWB MAP antenna and FSS reflector provided a fractional bandwidth of 136%and a high gain of 11.5 dB at 8.5 GHz with an acceptable radiation efficiency of 89%.Furthermore,the gain was improved across the operating band and kept between 8.3 and 11.5 dB.The proposed antenna was in good agreement between theoretical and experimental results and offered a wide enough bandwidth for UWB and vehicle applications.

High Gain UWB Four Elements Antenna Array for C-Band and X-Band Application

The C-band is allocated for commercial telecommunications via satellites. Amateur satellite operations in the frequency range 5.830 to 5.850 GHz for down-links and 5.650 to 5.670 GHz for up-links are allowed by International Telecommunication Union. The X-band is used for terrestrial broadband communication, radar applications, and portions of the X-band are assigned for deep space telecommunications. In this paper, a design of 4 × 1 Ultra Wide Band (UWB) antenna array for C-band and X-band applications is introduced. Metamaterial sixteen-unit cells are incorporated into each antenna element for radiation characteristics enhancement purposes. Permeability and permittivity of metamaterial unit cells are obtained all over the operating bandwidth. UWB unequal power divider is used to feed the proposed four elements antenna array based on Chebyshev excitation method. The proposed antenna has a suitable 3 dB beam width and gains all over the operating bandwidth which extends from 5.6 GHz to 10.9 GHz. The proposed antenna covers 60% and 72.5% of the C-band and X-band, respectively. The proposed antenna is fabricated, measured, and good agreement is obtained between simulated and measured results. The obtained performance ensures the suitability of the proposed antenna array for C-band and X-band applications.

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel,ultrawideband(UWB)planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things(IoT)applications.The total electrical dimensions of the proposed compact UWB antenna are 0.19λo×0.215λo×0.0196λo with the overall physical sizes of 15 mm×17 mm×1.548 mm at the lower resonance frequency of 3.8 GHz.The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation.The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at−10 dB return loss with a fractional bandwidth(FBW)of about 122%.The numerically computed and experimentally measured results agree well in between.A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation.The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%.The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.

Textile UWB 5G Antenna for Human Blood Clot Measurement

The antenna plays an essential role in the medical industry.The short-range 5th Generation(5G)communication can be used for seamless transmission,reception,patient monitoring,sensing and measuring various processes at high speeds.A passive Ultra Wide Band(UWB)antenna,used as a sensor in the mea-surement of Prothrombin Time(PT)i.e.,blood clot is being proposed.The inves-tigated micro-strip patch UWB antenna operating in the frequency range of 3.1 to 10.6 GHz consists of a circular patch with a diamond-shaped slot made of jeans substrate material with good sensing properties is accomplished by adjusting the copper thickness of the patch.Due to the turbidity in blood plasma,PT measure-ment is the repetitive approach to get accurate value.In order to solve this issue,an antenna is designed,fabricated and analysed to obtain the accurate PT mea-surements from blood plasma.The blood clotting is observed by electromagnetic emitted voltage converted into the frequency range of 5 to 10 GHz and voltage range of 0.66 to 0.87 mV.The circular UWB antenna is constructed employing jean’s substrate with a partial ground plane to improve the S-parameter,gain,bandwidth and performance characteristics.The proposed antenna with Specific Absorption Rate(SAR)value within the acceptable range can be used as a wear-able device in the human body,leveraging 5G technology.This antenna is well suited for various other applications like wireless sensors,wearable devices and short-range communication applications.

MIMO Antenna for UWB Communications

Design of ultra-wideband antennas is challenging in the stringent requirements that are often conflicting to achieve a wide impedance bandwidth while maintaining high radiation efficiency, uniform gain and compact size. A Multiple-Input Multiple-Output (MIMO) antenna system can enhance the overall antenna performance but at having to overcome new challenges such as reducing the mutual coupling and the correlation between the elements. A printed circular disc compact planar antenna is selected in this work due to its UWB performance and compact size for the MIMO antenna system. A parametric analysis is carried out to achieve an optimal design. The system developed consists of two elements with an overall size of 59 × 27 mm. The designed antenna system operates over the whole of the UWB bandwidth from 3.1 to 10.6 GHz with radiation efficiency up to 85% and reflection coefficients less that ?10 dB. The envelope correlation is less than ?60 dB throughout the UWB band while the diversity gain approaches 10 throughout the entire UWB bandwidth and Total Active Reflection Coefficient (TARC) between the antenna elements is less ?11 dB. Thus the proposed MIMO antenna outperforms similar antenna systems reported in the literature.

A Novel Bow-Tie Antenna with Triple Band-Notched Characteristics for UWB Applications

This paper presents the design of a compact bow-tie antenna with triple band notched characteristics for UWB applications. The proposed antenna can operate from 3.1 to 10.6 GHz with VSWR - 8.4 GHz) centered at 8.1 GHz, the CSRR2 rejects the WLAN band (5.15 - 5.85 GHz) centered at 5.6 GHz, and the CSRR3 rejects the band (4.10 - 4.47 GHz) centered at 4.32 GHz. Compared with recent design, this antenna is more compact, and presents better simulation results of its characteristics. Our newly designed antenna is a potential candidate for application in UWB communication systems.

Spiral Tuning Stub CPW-Fed UWB Slot Offset, Edge Cleft and Edge Slotted Antennas

After the release of the unlicensed Ultra Wideband (UWB) spectrum 3.1 GHz to 10.6 GHz for the commercial purposes by the Federal Communications Commission (FCC), industries and academia pay much attention due to its properties of excellent immunity to multi-path interference, high secured data rate, low power consumption, and simple configuration. The feasible UWB antenna design face some challenges including the ultra wide impedance matching, omni directional radiation pattern, constant gain, high radiation efficiency, low profile, compact antenna size and easy manufacturing. since the CPW fed planar slot antennas have the advantages of wide bandwidth, simple structure, less radiation loss, low cost and easy integration of monolithic microwave integrated circuits (MMIC). In general two parameters affect planar slot antennas impedance bandwidth, the slot width and feed structure. CPW-Fed Slot Antenna with Triangular Tuning Stub, the slot shape could be bow-tie slot, wide rectangular slot, circular slot and hexagonal slot. The impedance tuning can also be performed by using coupling techniques like inductively and capacitively coupled slots, dielectric resonator coupling and other techniques such as using photonic band gap (PGB). Using these techniques, large impedance bandwidth could be obtained but they are quite complicated. Planar slot antennas have two parameters that affect impedance bandwidth, the slot width and the feed structure. The optimum feed structure gives the good impedance matching and the wider slot gives more bandwidth. The proposed antenna in this paper is designed with a compact rectangular slot and a rectangular spiral feeding structure at the interior portion of the feed. The antenna is cleft and slotted at the edge and the effects is studied. The antenna only one of its kinds in structure, small in size and simple design due to less number of design parameters compared with the existing ultra wideband antennas in the literature. The bandwidth, gain, directivity and other antenna parameters are at acceptable level. IE3D method of moments based simulation software is used for this analysis. The proposed antenna design and its experimental result details is presented and discussed.