Study on the Generation of Ultra-Wideband (UWB) High Power Microwave

The experimental study of ultra-wideband (UWB) technology, its generation and on-line measurement are presented. An experimental repetitive UWB system is designed, manufactured, and tested. High-pressure spark gap switch and its components, as well as oil spark gap switch are studied experimentally on the system. Experimental results indicate that the system operates at a 200 pps repetitive rate with a stable performance. 100 MW peak power UWB pulses are obtained on the system. Fast-time response capacitive divider is designed and fabricated, allowing for an accurate measurement of the high power UWB signal. The main issues related to the design of the switch and the UWB signal online measurement are discussed.

Mathematical Formulations of Signal Propagation in Ultra-Wideband Transceiver Systems under a UWB Channel Environment with an Extension of Frequency Offset Correction

This paper analyzes mathematically the crucial aspects of signal processing in a Multi-Band (MB) Orthogonal Frequency Division Multiplexing (OFDM) based system considering Ultra-Wideband (UWB) channel environment. In the process of analysis, it emphasizes the significant features of UWB receiver design in comparison with ‘conventional’ narrow-band system. The analysis shows that the high dispersive nature of a frequency selective UWB channel effects the design of different signal processing blocks like pre-select filter, low noise amplifier (LNA) and analog-to-digital (A/D) converter in the receiver front end. The characteristic functions of each of these stages are now dominated by the channel characteristics and it needs to be modified accordingly. This analysis is extended further with the study of frequency offset error and its correction. The unbiased Cramer Rao Lower Bound (CRLB) of estimation error is calculated and supported by computer simulation. The performance of an MB-OFDM system with frequency offset correction in terms of Bit-Error-Rate (BER) is also reported.

Development of Compact Ultra-Wideband (UWB) Microstrip Bandpass Filter

Miniaturized Ultra-Wideband (UWB) microstrip bandpass filter with wide passband is presented. The filter is developed based on modified multiple mode resonator, which is formed by transversely attaching three pairs of non-uniform and folded stubs with lowpass and highpass sections. Both sides of high-impedance section are linked with two feed lines via direct coupled lines, resulting UWB bandpass filter. The designed filter provides 7 GHz passband between 2.5 and 9.5 GHz with approximately, –0.5 dB insertion loss, –35 dB minimum return loss at 6.85 GHz, linear phase over the passband and 110% of fractional bandwidth at –3 dB. The computed group delay variation in the passband for the filter is 0.02 ns. The overall dimension of the filter is 10.7 mm (length) × 3 mm (width) × 1.6 mm (thickness).

Ultra-wideband bilateral tapered slot-line antenna fed by coplanar waveguide

In order to broaden the bandwidth of a tapered slot- line antenna （TSA）, a bilateral tapered slot-line antenna （BTSA） with a new feeding structure of coplanar waveguide （CPW） is developed. Based on the fact that the bandwidth limitation of TSA mainly depends on its feeding structure, an improved CPW-based feed structure etched on the backboard of the BTSA is adopted to perform traveling-wave transition. Both the simulation results and measurement data verify that the proposed feeding structure results in ＂high-pass＂ frequency response for antenna impedance matching. The voltage standing wave ratio （VSWR） is less than 2：1 when the frequency is higher than 3 GHz. The antenna gain exceeds 7 dBi with good radiation patterns when the bandwidth is from 4 to 16 GHz. This ultra wideband （UWB） antenna with a compact size is specially available for the electronic systems of counter-measure and microwave imaging.

MODIFIED ULTRA WIDEBAND CIRCULAR PRINTED MONOPOLE ANTENNA

A simple and compact microstrip-fed ultra wideband （UWB） printed monopole antenna is presented. The antenna is composed of a circular radiator and a finitely grounded plane. The antenna occupies about 16.62 GHz absolute bandwidth and 142.7% relative bandwidth covering from 3.38 GHz to 20 GHz with voltage standing wave ratio （VSWR） below two. A quasi-omnidirectional and quasi-symmetrical radiation pattern in H plane is obtained in the whole bandwidth. The high performance of the antenna is validated with measured and simulated results given. The antenna can be applied for the system design of UWB wireless communication.

基于改进粒子群算法的UWB雷达人体动作识别研究

针对雷达信号中的杂波干扰及样本数量对人体动作识别精度的限制,提出一种基于改进粒子群算法(particle swarm optimization,PSO)优化支持向量机(support vector machine,SVM)模型的超宽带(ultra-wideband,UWB)雷达人体动作识别算法。利用动态目标指示(moving target indication,MTI)与小波阈值滤波对接收到的UWB回波信号进行预处理,消除回波信号中的杂波和噪声对人体动作识别的影响;结合二维离散小波包分解(two dimensional discrete wavelet packet decomposition,2D-DWPD)与奇异值分解(singular value decomposition,SVD),对预处理后的雷达信号进行特征提取和降维;提出一种改进粒子群算法,优化SVM模型的相关参数进行识别和分类。实验结果表明,提出的算法准确率可达到96.25%,具有良好的识别性能。

基于TOF和自适应抗差卡尔曼滤波的UWB室内定位算法

为提高超宽带(UWB)定位系统在室内复杂环境下的定位精度,提出一种基于飞行时间(TOF)和自适应抗差卡尔曼滤波(ARKF)的改进定位算法。针对超低功耗宽带设备在复杂室内环境状态下易受周围干扰而存在标准时间偏差的问题,提出一种改进的TOF算法,同时进行测距标定,拟合数据;对室内存在非视距(NLOS)干扰的情形,提出一种ARKF算法,通过比较残差与3倍信息的方差来判断视距(LOS)与NLOS情形。实验结果显示:该算法可以在静态与动态定位实验中有效提高系统定位精度,降低定位误差,取得较好的定位效果。

Compact ultra-wideband monopole antenna with dual-band notched function

A kind of compact ultra wideband （UWB） monopole antenna with dual-band notched function is presented.The proposed antenna,using ＂C＂ and ＂L＂ apertures embedded in the annular ring patch and ground patch,gets two bandnotched characteristics in WiMAX3.5 GHz and WLAN 5.5 GHz.The size of antenna is 24 mm × 36 mm × 1.6 mm.The simulation results show that waveband range of the antenna is 2.7-10.6 GHz for S11 ＜-10 dB and the band-notched wavebands are 3.2-3.8 GHz and 5.1-6 GHz.So it has miniaturization,ultra-band and band-notched characteristics.Meanwhile,the radition pattern,directivety and gain are perfect,which meets the practical need.

Parametric estimation of ultra wideband radar targets

Based on the analysis of impulse response properties, a scattering model of ultra wideband （UWB） radar targets is developed to estimate the target parameters exactly. With this model, two algorithms of multiple signal classification （MUSIC）, and matrix pencil （MP）, are introduced to calculate the scattering center parameters of targets and their performances are compared. The simulation experiments show that there are no differences in the estimation precision of MUSIC and MP methods when the signal-to-noise ratio （SNR） is larger than 13 dB. However, the MP method has a better performance than that of MUSIC method when the SNR is smaller than 13 dB. Besides, the time consuming of MP method is less than that of MUSIC method. Therefore, the MP algorithm is preferred for the parametric estimation of UWB radar targets.

Design of ultra wideband microwave absorber effectual for objects of arbitrary shape

In this paper, we present the design of multilayer microwave absorbers comprised of Co Fe alloy nano-particles and nano-flakes as fillers. The thickness of the unite layer is optimized by using the Genetic Algorithm. Efficient microwave absorptions over a wide frequency band and a range of incident angles are achieved by using multilayer absorbers. We show that the absorbers are effective not only for a planar surface but also for arbitrarily shaped objects as well.

Progress in ultra-wideband planar antennas

This paper introduces the advances of ultra-wideband （UWB） and super-wideband （SWB） planar antennas based on the printed monopole, microstrip slot and other planar antenna designs in the last decade. A brief history of the ultrawideband antennas is first provided. Several types of planar antennas for UWB systems with band-notched designs are reviewed. Special SWB planar antenna designs with the bandwidth ratio greater than 10：1 including metal-plate and printed monopole antennas and tapered slot antennas are presented and compared.

A Novel Ultra-Wideband Monopole Antenna with Band-Stop Characteristic

In this letter, a simple monopole antenna with variable band-notched characteristic for ultra wide band (UWB) function is proposed. Two L-shaped quarter-waveguide resonators coupled to the ground plane with two shorting tracks at the sides of the antenna are used to generate stop-band performance around 5.5 GHz (WLAN). The proposed antenna is fabricated on the substrate FR4 (relative permittivity of 4.7) and has a compact size of 16 × 28.5 × 1.6 mm. The designed antenna has a good impedance matching in 3.1 - 11.4 GHz frequency range with VSWR < 2, except the band 5 - 5.85 GHz.

3 - 10 GHz Ultra-Wideband Low-Noise Amplifier Using Inductive-Series Peaking Technique with Cascode Common-Source Circuit

The objective of this paper is to investigate a ultra-wideband (UWB) low noise amplifier (LNA) by utilizing a two-stage cascade circuit schematic associated with inductive-series peaking technique, which can improve the bandwidth in the 3-10 GHz microwave monolithic integrated circuit (MMIC). The proposed UWB LNA amplifier was implemented with both co-planer waveguide (CPW) layout and 0.15-μm GaAs D-mode pHEMT technology. Based on those technologies, this proposed UWB LNA with a chip size of 1.5 mm x 1.4 mm, obtained a flatness gain 3-dB bandwidth of 4 - 8 GHz, the constant gain of 4 dB, noise figure lower than 5 dB, and the return loss better than –8.5 dB. Based on our experimental results, the low noise amplifier using the inductive-series peaking technique can obtain a wider bandwidth, low power consumption and high flatness of gain in the 3 - 10 GHz. Finally, the overall LNA characterization exhibits ultra-wide bandwidth and low noise characterization, which illustrates that the proposed UWB LNA has a compact size and favorable RF characteristics. This UWB LNA circuit demonstrated the high RF characterization and could provide for the low noise micro-wave circuit applications.

Ultra-wideband reflective polarization converter based on anisotropic metasurface

In this paper, we propose an ultra-wideband reflective linear cross-polarization converter based on anisotropic metasurface. Its unit cell is composed of a square-shaped resonator with intersectant diagonal and metallic ground sheet separated by dielectric substrate. Simulated results show that the converter can generate resonances at four frequencies under normal incident electromagnetic（EM） wave, leading to the bandwidth expansion of cross-polarization reflection. For verification,the designed polarization converter is fabricated and measured. The measured and simulated results agree well with each other, showing that the fabricated converter can convert x- or y-polarized incident wave into its cross polarized wave in a frequency range from 7.57 GHz to 20.46 GHz with a relative bandwidth of 91.2%, and the polarization conversion efficiency is greater than 90%. The proposed polarization converter has a simple geometry but an ultra wideband compared with the published designs, and hence possesses potential applications in novel polarization-control devices.

Ultra-wideband printed antennas for communication applications

A new type of ultra-wideband （UWB） printed monopole antennas is presented, which is composed of a circular or armular patch and a trapeziform ground plane with a tapered CPW feeder in the middle. Both simulated and experimental results are presented, showing good agreement and therefore verifying validity of the design. The proposed antenna with a circular monopole patch achieves an 11.6： 1 measured ratio bandwidth of VSWR ≤2 （ from 0,79 GHz to 9.16 GHz）, while that with an annular patch obtains a measured ratio impedance bandwidth of 10.6：1 （from 0.87 GHz to 9.47 GHz）. In addition, these designs exhibit nearly omnidirectional radiation patterns with simple compact structures, which axe attractive in communications and others UWB applications.

Anti-interference ultra-wideband system based on spreading and interleaving

To suppress the interference in the ultra-wideband （AI-UWB） system is a challenging problem. An anti-interference multiband orthogonal frequency-division multiplexing ultra-wideband （AI-UWB） system, based on spreading and interleaving is addressed. It will exploit the frequency diversity across the subcarriers and provide the robustness to narrow-band interference, by spreading the coded bit streams within each sub-band and interleaving across all sub-bands. Simulating results show that the spreading and interleaving provide about 5 dB to 10 dB advantages over the conventional multiband orthogonal frequency-division multiplexing ultra-wideband system in signal-to-interference ratio. Spreading and interleaving is an effective cure for enhancing the robustness to narrowband interference.

一种复杂环境下UWB测距误差预测方法

针对复杂室内环境中,多径干扰和视距遮挡影响室内定位精度的问题,提出一种复杂环境下UWB测距误差的预测方法:根据超宽带(UWB)室内定位方法抗干扰能力强、定位精度高的特点,从理论上分析影响超宽带信号测距精度的因素;然后通过模型量化分析每种影响因素对测距误差的影响程度,改进以往通过信道脉冲响应特征分析单一的视距遮挡参数来提高定位精度的补偿算法;最后从数据挖掘和机器学习的角度出发,将多径效应、视距遮挡、标签与基站的距离、标签移动速度、标签与基站天线俯仰角以及气象因素(温度、湿度、压强)等对测距精度造成影响的重要因素作为特征进行分类和归类,并使用梯度提升决策树模型对数据集进行训练和预测。实验结果表明,该模型可以根据当前状态下的组合特征值估计出测距误差值,将当前预测的误差值补偿到测量值上,可以有效提高超宽带室内定位的精度。

PDR与UWB融合的森林消防员定位系统设计

针对森林消防员在林区环境下由于全球导航卫星系统(GNSS)定位拒止及惯性导航误差累积而难以精确定位的问题,设计了一种融合行人航位推算(PDR)和超宽带(UWB)测距的定位系统。首先,基于消防员个体装备的便携性要求,利用加速度计、磁强计、陀螺仪和气压计设计头戴式定位系统;其次,将指挥员作为基站,利用UWB测得消防员与基站之间的距离;接着,基于扩展卡尔曼滤波(EKF)设计了PDR与UWB融合的定位算法,将测距信息与消防员的运动状态进行融合解算,约束误差发散;最后,利用设计的软硬件定位系统进行了验证实验。结果表明:在真实林区实验中,与无约束PDR相比,采用PDR与UWB融合的定位方法将位置误差减小了60.04%,有效提升了系统的定位精度。

基于UWB的天然气站场室内三维定位系统研究

为解决天然气站场室内定位中因非视距(NLOS)现象导致人员和设备定位精度低的问题,设计了一种基于超宽带(UWB)与Three.js的天然气站场室内人员与设备三维定位系统。通过B/S三层架构,以Django框架和VUE框架为基础,利用Python、HTML5、CSS3和Three.js,实现定位信息在网页客户端的三维可视化。通过对UWB技术的研究,为保证定位精度,基于到达时间差(TDOA)测量值,采用卡尔曼滤波算法对其进行NLOS滤波,并结合Chan算法融合多基站数据,最终得到目标点的计算位置。通过搭建实验环境,对三维定位系统进行定位标签静态和动态定位实验。实验结果表明,对于NLOS现象严重的复杂室内环境,该系统定位精度高、运行平稳,能为天然气站场室内定位提供一种切实可行的技术。

Photonic generation of power-efficient FCC-compliant ultra-wideband waveforms using semiconductor optical amplifier (SOA):theoretical analysis and experiment verification

We theoretically design a power-efficient ultra-wideband pulse generator by combining three monocycle pulses with different weights. We also experimentally demonstrate a feasible scheme to generate such power-efficient ultra-wideband waveforms using cross-phase modulation in a single semiconductor optical amplifier. The designed ultra-wideband pulse fully satisfies the requirements for the spectral mask specified by the Federal Communications Commission with high power efficiency. In the experiment, a power-efficient ultra-wideband waveform with a pulse duration of 310 ps is achieved, and the power efficiency is greatly improved compared with that of a single nlonocycle pulse or a mixture of two monoeycles.