Effects of landscape fragmentation of plantation forests on carbon storage in the Loess Plateau,China

Tree plantation and forest restoration are the major strategies for enhancing terrestrial carbon sequestration and mitigating climate change.The Grain for Green Project in China has positively impacted global carbon sequestration and the trend towards fragmentation of plantation forests.Limited studies have been conducted on changes in plantation biomass and stand structure caused by fragmentation,and the effect of fragmentation on the carbon storage of plantation forests remains unclear.This study evaluated the differences between carbon storage and stand structure in black locust forests in fragmented and continuous landscape in the Ansai District,China and discussed the effects of ecological significance of four landscape indices on carbon storage and tree density.We used structural equation modelling to explore the direct and indirect effects of fragmentation,edge,abiotic factors,and stand structure on above-ground carbon storage.Diameter at breast height(DBH)in fragmented forests was 53.3%thicker,tree density was 40.9%lower,and carbon storage was 49.8%higher than those in continuous forests;for all given DBH>10 cm,the trees in fragmented forests were shorter than those in continuous forests.The patch area had a negative impact on carbon storage,i.e.,the higher the degree of fragmentation,the lower the density of the tree;and fragmentation and distance to edge(DTE)directly increased canopy coverage.However,canopy coverage directly decreased carbon storage,and fragmentation directly increased carbon storage and tree density.In non-commercial forests,fragmentation reduces the carbon storage potential of plantation,and the influence of patch area,edge,and patchy connection on plantation should be considered when follow-up trees are planted and for the plantation management.Thus,expanding the area of plantation patches,repairing the edges of complex-shaped patches,enhancing the connectivity of similar patches,and applying nutrients to plantation forests at regular intervals are recommended in fragmented areas of the Loess Plateau.

Mechanical behavior of rock under uniaxial tension:Insights from energy storage and dissipation

Many rock engineering projects show that the growth of tensile cracks is often an important cause of engineering disasters,and the mechanical behavior of rocks is essentially the transmission,storage,dissipation and release of energy.To investigate the tensile behavior of rock from the perspective of energy,uniaxial tension tests(UTTs)and uniaxial compression tests(UCTs)were carried out on three typical rocks(granite,sandstone and marble).Different unloading points were set before the peak stress to separate elastic energy and dissipated energy.The input energy density ut,elastic energy density ue,and dissipated energy density ud at each unloading point were calculated by integrating stress-strain curves.The results show that there is a strong linear relationship between the three energy parameters and the square of the unloading stress in UCT,but this linear relationship is weaker in UTT.The ue and ud increase linearly with the increase in ut in UCT and UTT.Based on the phenomenon that ue and ud increase linearly with ut,the applicability of Wp et index in UTT was proved and the relative energy storage capacity and absolute energy distribution characteristics of three rocks in UCT and UTT were evaluated.The tensile behavior of marble and sandstone in UTT can be divided into two stages vaguely according to the energy distribution,but granite is not the case.In addition,based on dissipated energy,the damage evolution of three types of rocks in UCT and UTT was discussed.This study provides some new insights for understanding the tensile behavior of rock.

Modulation of charge in C_(9)N_(4) monolayer for a highcapacity hydrogen storage as a switchable strategy

Developing advanced hydrogen storage materials with high capacity and efficient reversibility is a crucial aspect for utilizing hydrogen source as a promising alternate to fossil fuels.In this paper,we have systematically investigated the hydrogen storage properties of neutral and negatively charged C_(9)N_(4) monolayer based on density functional theory(DFT).Our foundings indicate that injecting additional electrons into the adsorbent significantly boosts the adsorption capacity of C_(9)N_(4) monolayer to H2 molecules.The gravimetric density of negatively charged C_(9)N_(4) monolayer can reach up to 10.80 wt% when fully covered with hydrogen.Unlike other hydrogen storage methods,the storage and release processes happen automatically upon introducing or removing extra electrons.Moreover,these operations can be easily adjusted through activating or deactivating the charging voltage.As a result,the method is easily reversible and has tunable kinetics without requiring particular activators.Significantly,C_(9)N_(4) is proved to be a suitable candidate for efficient electron injection/release due to its well electrical conductivity.Our work can serve as a valuable guide in the quest for a novel category of materials for hydrogen storage with high capacity.

Historical Changes and Multi-scenario Prediction of Land Use and Terrestrial Ecosystem Carbon Storage in China

Terrestrial carbon storage(CS)plays a crucial role in achieving carbon balance and mitigating global climate change.This study employs the Shared Socioeconomic Pathways and Representative Concentration Pathways(SSPs-RCPs)published by the Intergovernmental Panel on Climate Change(IPCC)and incorporates the Policy Control Scenario(PCS)regulated by China’s land management policies.The Future Land Use Simulation(FLUS)model is employed to generate a 1 km resolution land use/cover change(LUCC)dataset for China in 2030 and 2060.Based on the carbon density dataset of China’s terrestrial ecosystems,the study analyses CS changes and their relationship with land use changes spanning from 1990 to 2060.The findings indicate that the quantitative changes in land use in China from 1990 to 2020 are characterised by a reduction in the area proportion of cropland and grassland,along with an increase in the impervious surface and forest area.This changing trend is projected to continue under the PCS from 2020 to 2060.Under the SSPs-RCPs scenario,the proportion of cropland and impervious surface predominantly increases,while the proportions of forest and grassland continuously decrease.Carbon loss in China’s carbon storage from 1990 to 2020 amounted to 0.53×10^(12)kg,primarily due to the reduced area of cropland and grassland.In the SSPs-RCPs scenario,more significant carbon loss occurs,reaching a peak of8.07×10^(12)kg in the SSP4-RCP3.4 scenario.Carbon loss is mainly concentrated in the southeastern coastal area and the Beijing-TianjinHebei(BTH)region of China,with urbanisation and deforestation identified as the primary drivers.In the future,it is advisable to enhance the protection of forests and grassland while stabilising cropland areas and improving the intensity of urban land.These research findings offer valuable data support for China’s land management policy,land space optimisation,and the achievement of dual-carbon targets.

Air tightness of compressed air storage energy caverns with polymer sealing layer subjected to various air pressures

During the operation of compressed air storage energy system,the rapid change of air pressure in a cavern will cause drastic changes in air density and permeability coefficient of sealing layer.To calculate and properly evaluate air tightness of polymer sealing caverns,the air-pressure-related air density and permeability must be considered.In this context,the high-pressure air penetration in the polymer sealing layer is studied in consideration of thermodynamic change of the cavern structure during the system operation.The air tightness model of compressed air storage energy caverns is then established.In the model,the permeability coefficient and air density of sealing layer vary with air pressure,and the effectiveness of the model is verified by field data in two test caverns.Finally,a compressed air storage energy cavern is taken as an example to understand the air tightness.The air leakage rate in the caverns is larger than that using air-pressure-independent permeability coefficient and air density,which is constant and small in the previous leakage rate calculation.Under the operating pressure of 4.5-10 MPa,the daily air leakage in the compressed air storage energy cavern of Yungang Mine with high polymer butyl rubber as the sealing material is 0.62%,which can meet the sealing requirements of compressed air storage energy caverns.The air tightness of the polymer sealing cavern is mainly affected by the cavern operating pressure,injected air temperature,cavern radius,and sealing layer thickness.The cavern air leakage rate will be decreased to reduce the cavern operating pressure the injection air temperature,or the cavern radius and sealing layer thickness will be increased.

Spatial analysis of carbon storage density of mid-subtropical forests using geostatistics： a case study in Jiangle County, southeast China

The mid-subtropical forest is one of the biggest sections of subtropical forest in China and plays a vital role in mitigating climate change by sequestering carbon.Studies have examined carbon storage density(CSD) distribution in temperate forests. However, our knowledge of CSD in subtropical forests is limited. In this study, Jiangle County was selected as a study case to explore geographic variation in CSD. A spatial heterogeneity analysis by semivariogram revealed that CSD varied at less than the mesoscale(approximately 2000–3000 m). CSD distribution mapped using Kriging regression revealed an increasing trend in CSD from west to east of the study area.Global spatial autocorrelation analysis indicated that CSD was clustered at the village level(at 5% significance).Some areas with local spatial autocorrelation were detected by Anselin Local Moran's I and Getis-Ord G*. A geographically weighted regression model showed different impacts on the different areas for each determinant. Generally, diameter at breast height, tree height, and stand density had positive correlation with CSD in Jiangle County, but varied substantially in magnitude by location.In contrast, coefficients of elevation and slope ranged from negative to positive. Based on these results, we propose certain measures to increase forest carbon storage,including increasing forested area, improving the quality of the current forests, and promoting reasonable forest management decisions and harvesting strategies. The established CSD model emphasizes the important role of midsubtropical forest in carbon sequestration and provides useful information for quantifying mid-subtropical forest carbon storage.

Application-oriented hydrolysis reaction system of solid-state hydrogen storage materials for high energy density target:A review

Hydrogen storage and delivery technology is still a bottleneck in the hydrogen industry chain.Among all kinds of hydrogen storage methods,light-weight solid-state hydrogen storage(LSHS)materials could become promising due to its intrinsic high hydrogen capacity.Hydrolysis reaction of LSHS materials occurs at moderate conditions,indicating the potential for portable applications.At present,most of review work focuses on the improvement of material performance,especially the catalysts design.This part is important,but the others,such as operation modes,are also vital to to make full use of material potential in the practical applications.Different operation modes of hydrolysis reaction have an impact on hydrogen capacity to various degrees.For example,hydrolysis in solution would decrease the hydrogen capacity of hydrogen generator to a low value due to the excessive water participating in the reaction.Therefore,application-oriented operation modes could become a key problem for hydrolysis reaction of LSHS materials.In this paper,the operation modes of hydrolysis reaction and their practical applications are mainly reviewed.The implements of each operation mode are discussed and compared in detail to determine the suitable one for practical applications with the requirement of high energy density.The current challenges and future directions are also discussed.

Effects of Co_(2)O_(3)Addition on Microstructure and Properties of SiC Composite Ceramics for Solar Absorber and Storage

SiC composite ceramics for solar absorber and storage integration are new concentrating solar power materials.SiC composite ceramics for solar absorber and storage integration were fabricated using SiC,black corundum and kaolin as the raw materials,Co_(2)O_(3)as the additive via pressureless graphite-buried sintering method in this study.Influences of Co_(2)O_(3)on the microstructure and properties of SiC composite ceramics for solar absorber and storage integration were studied.The results indicate that sample D2(5wt%Co_(2)O_(3))sintered at 1480℃exhibits optimal performances for 119.91 MPa bending strength,93%solar absorption,981.5 kJ/kg(25-800℃)thermal storage density.The weight gain ratio is 12.58 mg/cm2after 100 h oxidation at 1000℃.The Co_(2)O_(3)can decrease the liquid phase formation temperature and reduce the viscosity of liquid phase during sintering.The liquid with low viscosity not only promotes the elimination of pores to achieve densification,but also increases bending strength,solar absorption,thermal storage density and oxidation resistance.A dense SiO_(2) layer was formed on the surface of SiC after 100 h oxidation at 1000℃,which protects the sample from further oxidation.However,excessive Co_(2)O_(3)will make the microstructure loose,which is disadvantageous to the performances of samples.

Hydrogen storage in BC_3 composite single-walled nanotube:a combined density functional theory and Monte Carlo investigation

This paper applies a density functional theory （DFT） and grand canonical Monte Carlo simulations （GCMC） to investigate the physisorptions of molecular hydrogen in single-walled BC3 nanotubes and carbon nanotubes. The DFT calculations may provide useful information about the nature of hydrogen adsorption and physisorption energies in selected adsorption sites of these two nanotubes. Furthermore, the GCMC simulations can reproduce their storage capacity by calculating the weight percentage of the adsorbed molecular hydrogen under different conditions. The present results have shown that with both computational methods, the hydrogen storage capacity of BC3 nanotubes is superior to that of carbon nanotubes. The reasons causing different behaviour of hydrogen storage in these two nanotubes are explained by using their contour plots of electron density and charge-density difference.

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB(hydroyl-terminated polybutadiene)coating at 25℃ and analyze the influence of pre-strain on the storage life,the accelerated aging tests of HTPB coating at 40℃,50℃,60℃,70℃ with the pre-strain of 0%,3%,6%,9%,respectively were carried out.The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed.The storage life of HTPB coating at 25℃ was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation.The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time,and decreased with the increase of pre-strain.Under 0% prestrain,the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%,6%and 9%pre-strained aging.The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%.The storage life of HTPB coating was 15.2935 years at 25C under 0% prestrain,which was reduced by 13.9007%,75.6949% and 89.7859% under 3%,6% and 9% pre-strain,respectively.The existence of pre-strain has a serious impact on the storage life of HTPB coating,therefore,the pre-strain should be avoided as much as possible during the actual storage.

Estimation of Storage and Density of Organic Carbon in Peatlands of China

Based on the results of the National Survey of Peat Resources(1983-1985) and the investigation results on the peatlands of China,the storage and density of the organic carbon in the peatlands of China were estimated.The total organic carbon storage(OCS) of the peatlands in China,including bare peatlands and buried peatlands,are 1.503 × 109 t,unevenly distributed over 30 provincial level administrative units and 16 climatic zones.Peatland organic carbon storage(POCS) in Sichuan(6.45 × 108 t) and Yunnan provinces(2.91 × 108 t) is the highest,accounting for 62.29% of the total POCS.Humid zone of plateau has the highest POCS of 7.14 × 108 t,especially in the Zoigê Plateau,where the POCS is 6.30 × 108 t,accounting for 41.92% of the total POCS of China.The organic carbon density(OCD) of the peatlands in China mostly ranges from 80 kg/m3 to 140 kg/m3,and the range of the maximum is 270-360 kg/m3,and the minimum is less than 80 kg/m3.Divided by the Yanshan Mountain,Taihang Mountains and Hengduan Mountains,the peatland oganic carbon density(POCD) is lower on the northwestern side than that on the southeastern side.Jiangxi Province has the highest POCD due to the ancient buried peatlands.The OCD of the bare peatlands is mostly in the range of 60-150 kg/m3,and that of the buried peatlands is more than 100 kg/m3.In the bare peatlands,the OCD generally increases from the surface layer to the below surface layer,and then decreases with the depth.Although the peatlands area in China is small,the OCS per unit area is far higher than the other soil types,so peatlands protection can effectively mitigate climate change.

Magneto-optical Disk Material for Improving the Density of Information Storage

This paper introduces the fundamental principle and features ofmagneto-optical storage technol- ogy, and discuses the trend and aseries of key techniques for increasing the data storage density ofmagneto-opti- cal disk. The three ways including MO media, recordingmethod and readout method for increasing the disk ca- pacity havebeen discussed. Moreover, the importance with the exchange-coupledeffect between the magnetic layers and recording domain morphology isemphasized.

Density,Storage and Distribution of Carbon in Mangrove Ecosystem in Guangdong's Coastal Areas

Using the mangrove plants and sediment of the typical mangrove areas in Guangdong's coastal areas,P. R. China as the research object,the density,storage and spatial distribution of carbon are studied. The study method is the combination of the wild field analysis and laboratory testing method. The results show that the carbon density of the sediment will gradually decrease because of the increased depth,and has nothing to do with the difference of the area and tree species. The average carbon density of 50 cm sediment is 0. 007 g C / g. The carbon density is obviously different in different components of different mangrove species in different regions. The total carbon storage in different regions is in the following order: Zhuhai > Gaoqiao > Shenzhen > Shuidong Bay > Guanghai Bay > Raoping > Daya Bay > Chenghai. The carbon density and carbon storage are obviously higher in mangrove covered area than blank area. It shows that mangroves have very strong carbon sink function.

Spatial Pattern of Forest Carbon Storage and Carbon Density in the Kanas National Natural Reserve

Based on the sub-forest management inventory, volume-derived biomass and mean biomass, carbon storage and its spatial distribution of forest vegetation in Kanas National Nature Reserve(hereinafter referred to as the Reserve) were calculated. The results showed that carbon storage of forest vegetation in the Reserve was 3.004 7 Tg C, mean carbon density was 49.58 Mg C/hm^2; carbon storage of different vegetation types: forest land >shrubbery > open forest > scattered trees, among which carbon storage of forest land accounted for 90.18% of the total carbon storage of the forest vegetation, and mean carbon density of forest land was 68.87 Mg C/hm^2; in terms of regional distribution, spatial distribution of carbon storage and carbon density declined from southwest to northeast; in the Reserve, carbon storage of mature and over-mature forest stands accounted for 79.89% of carbon storage of forest land. If scientifi c management is applied, carbon sequestration capacity of forest will be improved.

Korean Academic Librarians’ Recognition of the High Density Book Storage System

Korean academic libraries are facing a serious space shortage problem due to the inability to uphold the rapidly increasing amount of printed materials despite having expanded the number of physical facilities. Data computerization has been considered as a solution to the issue, but deliberation for the High Density Book Storage System has been on the rise because of its impressive method of preserving printed materials in a realistic facility. Despite the different methods of print material storage, Korean academic libraries have largely focused on investing in the least efficient method of compact shelving to solve this issue. It is hypothesized that the misuse of funds on inefficient systems is occurring due to the lack of knowledge about the high-density book storage systems like the Harvard model. In order to propose a realistic solution to the academic library space shortage crisis on a logical basis, it is imperative that a study of academic librarians is conducted to investigate their knowledge on such efficient storage systems.

Effects of Rest Grazing on Organic Carbon Storage in Stipa grandis Steppe in Inner Mongolia, China

This study was aimed to evaluate the potential effects of rest grazing on organic carbon storage in Stipa grandis steppe of Inner Mongolia, China. Using potassium dichromate heating method, we analyzed the organic carbon storage of plant and soil in Stipa grand＆ steppe after rest grazing for 3, 6, and 9 yr. The results indicated that as the rest grazing ages prolonged, the biomass of aboveground parts, litter and belowground plant parts （roots） of the plant communities all increased, meanwhile the C content of the biomass increased with the rest grazing ages prolonging. For RG0, RG3a, RG6a, and RG9a, C storage in aboveground vegetation were 60.7, 76.9, 82.8 and 122.2 g C m2, respectively; C storage of litter were 5.1, 5.8, 20.4 and 25.5 g C m^-2, respectively; C storage of belowground roots （0-100 cm） were 475.2, 663.0, 1 115.0 and 1 867.3 g C m^-2, respectively; C storage in 0-100 cm soil were 13.97, 15.76, 18.60 and 32.41 kg C m^-2, respectively. As the rest grazing ages prolonged, the organic C storage in plant communities and soil increased. The C storage ofbelowground roots and soil organic C was mainly concentrated in 0-40 cm soil body. The increased soil organic C for RG3a accounted for 89.8% of the increased carbon in vegetation-soil system, 87.2% for RG6a, and 92.6% for RG9a. From the perspective of C sequestration cost, total cost for RG3a, RG6,, and RG9a were 2 903.4, 5 806.8 and 8 710.2 CNY haq, respectively. The cost reduced with the extension of rest grazing ages, 0.15 CNY kg^-1 C for RG3a, 0.11 CNY kg-~ C for RG6a and 0.04 CNY kg℃ for RG9a. From the growth characteristics of grassland plants, the spring was one of the two avoided grazing periods, timely rest grazing could effectively restore and update grassland vegetation, and was beneficial to the sustainable use of grassland. Organic C storage for RG9a was the highest, while the cost of C sequestration was the lowest. Therefore, spring rest grazing should be encouraged because it was proved to be a very efficient grassland use pattern.

Hydrogen storage capabilities of the most stable isomers of Na_nB_m(m+n=6) clusters

The most stable isomers of NanBm （m ＋ n = 6） clusters and their hydrogen storage properties are investigated by means of density functional theory with a 6-311＋G（d） basis set. To study the hydrogen storage properties, all of the stable structures of NanBmHx （m ＋ n =6） clusters have been optimized. It shows that boron atoms of NanBm are separated from the other boron atoms, and form satellite BHx （x = 3, 4） clusters around the centre, which attach to the system by a bridging bond of a hydrogen atom or an Na atom. Compared with the hydrogen storage capabilities, the Na3B3 has the highest hydrogen storage capacity among NanBm clusters. The binding energies, interaction energies of hydrogen atom with NanBm clusters and second difference in energy of Na3B3Hx clusters have been calculated. The results show that the stability of the NanBmHx clusters present an odd-even oscillatory effect, as the number of H atoms increases.

Research on energy storage capacity configuration for PV power plants using uncertainty analysis and its applications

Compensating for photovoltaic(PV)power forecast errors is an important function of energy storage systems.As PV power outputs have strong random fluctuations and uncertainty,it is difficult to satisfy the grid-connection requirements using fixed energy storage capacity configuration methods.In this paper,a method of configuring energy storage capacity is proposed based on the uncertainty of PV power generation.A k-means clustering algorithm is used to classify weather types based on differences in solar irradiance.The power forecast errors in different weather types are analyzed,and an energy storage system is used to compensate for the errors.The kernel density estimation is used to fit the distributions of the daily maximum power and maximum capacity requirements of the energy storage system;the power and capacity of the energy storage unit are calculated at different confidence levels.The optimized energy storage configuration of a PV plant is presented according to the calculated degrees of power and capacity satisfaction.The proposed method was validated using actual operating data from a PV power station.The results indicated that the required energy storage can be significantly reduced while compensating for power forecast errors.

Spatial Pattern Evolution and Influencing Factors of Cold Storage in China

Cold storage is the vital infrastructure of cold chain logistics. In this study, we analyzed the spatial pattern evolution characteristics, spatial autocorrelation and influencing factors of cold storage in China by using kernel density estimation(KDE), spatial autocorrelation analysis(SAA), and spatial error model(SEM). Results showed that: 1) the spatial distribution of cold storage in China is unbalanced, and has evolved from ‘one core’ to ‘one core and many spots’, that is, ‘one core’ refers to the Bohai Rim region mainly including Beijing, Tianjin, Hebei, Shandong and Liaoning regions, and ‘many spots’ mainly include the high-density areas such as Shanghai, Fuzhou, Guangzhou, Zhengzhou, Hefei, Wuhan, ürümqi. 2) The distribution of cold storage has significant global spatial autocorrelation and local spatial autocorrelation, and the ‘High-High’ cluster area is the most stable, mainly concentrated in the Bohai Rim;the ‘Low-Low’ cluster area is grouped in the southern China. 3) Economic development level, population density, traffic accessibility, temperature and land price, all affect the location choice of cold storage in varying degrees, while the impact of market demand on it is not explicit.