Extraction of aluminum by pressure acid-leaching method from coal fly ash

Aluminum was leached out from coal fly ash by pressure acid-leaching method. The effects of coal fly ash size, sulfuric acid concentration, reaction time and reaction temperature on extraction efficiency of aluminum were investigated comprehensively. The phase and morphology of coal fly ash and solid residues after reaction were analyzed by XRD, SEM and IR. The optimal technological conditions for extracting aluminum from coal fly ash were eventually confirmed that coal fly ash with size of 74 μm and sulfuric acid with concentration of 50% are mixed in pressure reaction kettle to react for 4 h at 180 ℃. Under the optimal conditions, the extraction efficiency of aluminum can reach 82.4%.

Conversion of Pretreated Biomass into Levulinic Acid via Continuous Extraction at Atmosphere Pressure

Conversion of biomass to chemicals or fuels under mild condition is still a challenge. As a platform molecule for chemicals and fuels, levulinic acid （LA） has been prepared by lique-faction of biomass at high pressure. In order to carry out the conversion from wheat straw to LA at atmosphere pressure, continuous extraction of the reactive system by an organic solvent with a higher density than that of water was utilized for degradation of pretreated biomass. Yields of LA were measured by means of gas chromatography-mass spectrometry and nuclear magnetic resonance. The results revealed that a maximum yield of 30.66% of LA can be obtained from wheat straw. In addition, the effects of biomass pretreated conditions on the LA conversion have been studied. The study provides a new route to convert biomass to valuable chemicals at atmosphere pressure.

Extracting vanadium from stone-coal by oxygen pressure acid leaching and solvent extraction

Vanadium extraction from stone-coal was investigated by oxygen pressure acid leaching and solvent extraction.The mineralogy of the stone-coal from Tongren City of Guizhou Province,China,was investigated by various determination methods. The effects of leaching time,leaching temperature,leaching agent concentration,leaching L/S ratio,granularity of material,additive consumption were investigated based on the mineralogy.The results show that under the conditions of leaching time of 3-4 h, temperature of 150℃,sulfuric acid consumption of 25%?30%,ratio of liquid to solid of 1.2:1,the granularity less than 0.074 mm, additive consumption of 3%-5%,and oxygen pressure of 1.2 MPa,and the vanadium leaching rate can be more than 92%by the method of two-step pressurized acid leaching.The powdery V2O5 product with 99.52%in V2O5 content is obtained by the flowsheet of acid recovery,removing iron by reduction process,solvent extraction,precipitating vanadium with ammonium water,and pyrolysis from the stone-coal oxygen pressure acid-leaching solution.The total recovery efficiency of vanadium is above 85%,which is more than 20%higher than that obtained in the conventional process.Furthermore,the new process does not cause air pollution since no HCl or Cl2 is released by calcination of the raw material.

Extraction of vanadium from vanadium slag by high pressure oxidative acid leaching

To extract vanadium in an environment friendly manner, this study focuses on the process of leaching vanadium from vanadium slag by high pressure oxidative acid leaching. Characterizations of the raw slag, mineralogy transformation, and the form of leach residues were made by X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The result shows that the vana-dium slag is composed of major phases of fayalite, titanomagnetite, and spinel. During the high pressure oxidative acid leaching process, the fayalite and spinel phases are gradually decomposed by sulfuric acid, causing the release of vanadium and iron in the solution. Meanwhile, unreacted silicon and titanium are enriched in the leach residues. With the initial concentration of sulfuric acid at 250 g·L^-1, a leaching tem-perature of 140℃, a leaching time of 50 min, a liquid-solid ratio of 10：1 mL·g^-1, and oxygen pressure at 0.2 MPa, the leaching rate of vana-dium reaches 97.69%.

Isolation and purification of carbazole contained in anthracene slag by extraction combined with medium pressure liquid chromatography

Ultrasonic-assisted extraction(UAE)combined with medium pressure liquid chromatography(MPLC)was designed for carbazole separation from anthracene slag(AS).The effects of liquid/solid ratio,temperature,and extraction times on carbazole separation were investigated.When using CC14 and ethyl acetate as extraction solvents and combining with MPLC,carbazole recovery and purity are 75.1%and 95.4%,respectively.The mechanism for carbazole separation were presumed by examining intermolecular interactions such as N-H…π,π-π,and C-Cl…πinteractions.These results demonstrate that UAE/MPLC has a considerable potential as a green and promising strategy for separating and purifying carbazole and other chemicals from AS.

An extraction method for pressure beat vibration characteristics of hydraulic drive system based on variational mode decomposition

In the pump-controlled motor hydraulic transmission system,when the pressure pulsation frequencies seperately generated by the pump and the motor are close to each other,the hydraulic system will generate a strong pressure beat vibration phenomenon,which will seriously affect the smooth running of the hydraulic system.However,the modulated pressure signal also carries information related to the operating state of the hydraulic system,and a accurate extraction of pressure vibration characteristics is the key to obtain the operating state information of the hydraulic system.In order to extract the pressure beat vibration signal component effectively from the multi-component time-varying aliasing pressure signal and reconstruct the time domain characteristics,an extraction method of the pressure beat vibration characteristics of the hydraulic transmission system based on variational mode decomposition(VMD)is proposed.The experimental results show that the VMD method can accurately extract the pressure beat vibration characteristics from the high-pressure oil pressure signal of the hydraulic system,and the extraction effect is preferable to that of the traditional signal processing methods such as empirical mode decomposition(EMD).

TOOTH EXTRACTION UNDER DIGITAL ACUPOINT PRESSURE ANESTHESIA IN 60 CASES

Tooth extraction was performed in 60 cases under digital acupoint pressure anes-thesia with a remarkable curative effect. The curative effect was higher for loose teeth. The effectiverate was 100%. The tooth extraction under digital acupoint pressure anesthesia has many advantages.Tooth extraction can be performed only by pressing a certain acupoint with safety, convenience and e-conomy. The method avoids the side effects of narcotic and reduces the patient’s fear of an injectionof narcotic.

Lung Injury Resulting from Fluted Silastic Soft Drain Extraction under Negative Pressure Suction

We experienced two cases of lung injury resulting from fluted silastic drain extraction under reservoir-generated negative pressure suction. In the first case, a 67-year-old man underwent coronary artery bypass grafting. A 19 Fr BLAKE drain was placed at the pericardial cavity, the mediastinum, and the left thoracic cavity. All three drains were connected to J-VAC reservoirs. After removing the drains (which maintained the negative pressure), subcutaneous emphysema and hemopneumothorax occur. A trocar catheter was inserted. Bleeding and the air leak terminated within a day. In the second case, a 73-year-old man underwent aortic valve replacement. Right pneumothorax occurred after the removal of the pleural cavity drain, which maintained the negative pressure generated by the reservoir. We inserted a trocar catheter, and the air leak terminated within a day. We hypothesized that the reservoir-generated negative pressure causes the pleura to enter the groove of the drain and become damaged during extraction. We stopped using a reservoir to connect to the fluted silastic drain placed at the pleural cavity and removed the negative pressure when extracting the pleural cavity drain. Since implementing this change, we have not experienced a similar lung injury in more than 500 cardiac surgery patients.

Structural, Pasting, and Thermal Properties of Ultra-high Pressure-treated Lotus Seed Starch

Lotus seed starch （15%, w/w） was subjected to ultra-high pressure （UHP） at 500 MPa for 10～60 min. The effects of UHP on the structural, pasting, and thermal properties of starch were investigated using solid-state 13C CP/MAS NMR, differential scanning calorimetry （DSC）, HPSEC-MALLS-RI, and a rapid visco analyzer. The 13C CP/MAS NMR results revealed a reduction in the relative crystallinity and peak intensity of the crystalline state with increasing the UHP time. The molecular weight of native starch was 1.433 × 107 Da, which was higher than that of the UHP-treated starch. Viscograms of UHP-treated starch revealed an increase in paste viscosity, peak time, and pasting temperature and a reduction in breakdown and setback viscosity compared to the native starch. Furthermore, the DSC results showed a reduction in gelatinization temperature and gelatinization enthalpy with increasing the UHP time.

Effectiveness of groundwater extraction in Beijing since the ingauration of the first phase of the South-to-North Water Diversion Project, China

This study assess the effectiveness of groundwater pressure extraction in Beijing since the opening of the first phase of the South-to-North Water Diversion Project,using survey and evaluation methods.Firstly,an analysis of water consumption structure and the usage of diverted river water in Beijing in recent years was conducted.Secondly,the volume of groundwater pressure extraction in Beijing after the 33 project's inauguration was examined,revealing a decrease from 1.96 billion m^(3) in 2014 to 1.35 billion m^(3) in 2020.The proportion of water supply reduced from 52.3%in 2014 to 33.3%in 2020,leading to an optimized water supply structure.By the end of 2020,groundwater pressure extraction in Beijing is estimated at 446 million m3,with a substantial reduction in over-exploitation of groundwater.Groundwater resources have been effectively replenished,and the strategic reserve capacity has been enhanced.Furthermore,this study evaluates the change in groundwater levels as an indicator of the effectiveness of pressure extraction.The declining trend of groundwater levels in Beijing has been effectively mitigated,and there has been a consistent rebound in groundwater levels over the past five years.

Fast analysis of derivatives of polycyclic aromatic hydrocarbons in soil by ultra-high performance supercritical fluid chromatography after supercritical fluid extraction enrichment

An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.

The Impact of Different Mining and Releasing Ratios on the Over-Support Pressure of Header Working Face

Through the theoretical analysis of overburden destabilization mechanism, FLAC 3D simplified plane numerical simulation method and field measurement method, we compared the relationship of overburden support pressure at 35 m of workface recovery, and the peak overburden support pressure decreased from 13.85 Mpa to 11.97 Mpa from 1:1 to 1:3. With the increase of mining ratio, the peak over-supporting pressure decreases: with the increase of top coal recovery thickness, the peak over-supporting pressure and the influence range will be further expanded, and the distance between the peak over-supporting pressure and the coal wall of the working face will be further increased and the high stress zone of the peak area will be expanded simultaneously.

Effects of ultra-high hydrostatic pressure on foaming and physical-chemistry properties of egg white

The influences of ultra-high hydrostatic pressure treatment on foaming and physical properties (solubility, hydrophobicity and sulfhydryl content) of egg white were investigated. A pressure range of 0-500 MPa, time range of 0-20 min and pH range of 7.5-8.5 were selected. The foaming property of egg white is improved by 350Mpa and 10min. The treatment resulted in in- crease of sulfhydryl content of egg white, while solubility and hydrophobicity were significantly decreased.

Synthesis of condensed polynuclear aromatic resin from furfural extract oil of reduced-pressure route Ⅱ

As an industrial byproduct of oil refining,furfural extract oil from reduced-pressure route Ⅱ with high aromatic content was used to prepare heat-resistant condensed polynuclear aromatic（COPNA） resin for the first time.The basic properties of furfural extract oil and the resultant COPNA resin were characterized by infrared spectroscopy（FT-IR）,nuclear magnetic resonance spectroscopy（1H-NMR）,thermogravimetric analysis（TGA） and elemental analysis（EA）.The result showed that heat treated furfural extract oil was successfully used for the synthesis of heat-resistant COPNA resin.The average structural parameters of raw materials and prepared resin were calculated by the improved Brown-Ladner method,and the averaged molecular structure of the resin was obtained.The reaction mechanism for the synthesis of COPNA resin was suggested as an acid-catalyzed positive ion type polymerization.

Determination of N-Methylcarbamate Pesticides in Vegetables by Solid-phase Extraction and Pressurized Capillary Electrochromatography

Capillary electrochromatography （CEC） is a hybrid technique that couples the good selectivity of high-performance liquid chromatography （HPLC） and the high separation efficiency of capillary electrophoresis （CE）. Both charged and uncharged compounds can be separated effectively using CEC. In some cases, however, the bubbles that generated in the capillary column in pure CEC performed on commercial CE instruments will cause unstable current and even disrupt the separation when the concentration of buffer is very high. By applying pressure on the electrochromatographic separation via a micro-HPLC pump, pressurized capillary electrochromatography （ pCEC ） combines two driving factors of the electroosmotic flow （EOF） and the pressure flow, thereby increasing the speed and the selectivity of separation and suppressing the bubble formation. Moreover,

Pressurized Synchronous Extraction of Volatile Oils, Total Flavonoids and Tannic Acid from Artemisia argyi

[Objectives] This study aimed to optimize the conditions for pressurized synchronous extraction of volatile oils, total flavonoids and tannic acid from Artemisia argyi .[Methods] Single factor experiments and orthogonal experiments were conducted.[Results] Pressurization had a significant effect on the extraction rate of chemical constituents of A. argyi . The optimal conditions for pressurized synchronous extraction of volatile oils, total flavonoids and tannic acid from A. argyi were as follows: solvent concentration of 70%, solid to liquid ratio of 1∶ 30 (g/mL), extraction pressure of 0.9 MPa, extraction time of 40 min and extraction temperature of 90 ℃. Under the optimal extraction conditions, the yields of volatile oils, total flavonoids and tannic acid were 0.852%, 4.66% and 6.79%, respectively.[Conclusions] Compared with other extraction methods, the pressurized assistant solvent extraction method can achieve the synchronous extraction of volatile oils, total flavonoids and tannic acid from A. argyi . The process is stable, short in extraction time, high in solvent utilization rate and ideal in extraction effect of the three components from A. argyi .

Analysis on performance and test of a new type of ultra-high pressure pipe joint

Analysis as well as application of ultra-high pressure hydraulic system and elements has become a trend. The structure and operation principle of a new type of ultra-high pressure pipe joint is introduced. The structure of the new type of ultra-high pressure pipe joint is simple and is easy to be produced. The finite element model on two working conditions( preload condition with 30 N·m torque and static-loading condition with 70 MPa pressure) is built and computed. The width of contact area,the equivalent stress status,as well as the contact pressure status are plotted and analyzed. According to the national standard,test on air-tightness,blasting,and cyclic endurance is conducted and the results show that the new type of ultra-high pressure pipe joint has the sealability for ultra-high pressure up to 70 MPa,and the DN6 ultra-high pressure pipe joint can provide effective seal under70 MPa fluid pressure. The research can provide a thinking and method on designing ultra-high pressure pipe joint and push forward the development of ultra-high pressure hydraulic system.

Enzymatic Hydrolysis of Hairtail Surimi in an Ultra-High Pressure Bioreactor

Amino acids have been extracted from Hairtail surimi using enzymes in an ultra-high pressure bioreactor. The extraction efficiency of different enzymes including papain, trypsin, and proteases (acid, neutral, alkaline) also has been evaluated, and it has been discovered that neutral protease behaved the best. The amino acids were analyzed using automatic amino acid analyzer, and the enzymatic digestion conditions were optimized. For neutral protease, the optimal condition was 50℃, 250 MPa, pH 7.0. Material to liquid ratio of enzyme is 6%. More than 29 amino acids were detected after 24 hours of hydrolysis;the enzymatic hydrolysis rate can reach 83.29%. The results show that enzymatic digestion under ultra-high-pressure provides a very promising approach to extract amino acids from Hairtail surimi.

Comparison of Extractive Distillation and Pressure-Swing Distillation for Methanol and Acetonitrile Separation

In the present work,a comparative study of the extractive distillation and pressure swing distillation for methanol-acetonitrile separation is performed for the first time.Different separation alternatives,including the conventional extractive distillation,the extractive distillation with vapor or liquid side-stream,the pressure-swing distillation with or without full heat integration,and the heat-pump assisted pressure-swing distillation are rigorously simulated and optimized based on the minimum total annual cost(TAC)via the sequential iterative strategy.The results show that TAC and CO2 emission of the new extractive distillation with vapor side-stream(Vapor-SED)are similar to those of the extractive distillation with liquid side-stream(Liquid-SED).Furthermore,the Vapor-SED and Liquid-SED can achieve 30.01%and 30.56%reduction in TAC and 23.32%and 23.49%reduction in CO2 emission,respectively,over the most competitive fully heat-integrated PSD configuration.Hence,the extractive distillation with vapor or liquid side-stream appears to be a better option economically and environmentally for the separation of methanol and acetonitrile.

Development of Different Strategies for the Clean-Up of Polychlorinated Biphenyls (PCBs) Congeners Using Pressurized Liquid Extraction

The extracted fish samples (w/w) using pressurized liquid extraction (PLE) were cleaned up by applying different adsorbent materials such as: combination of acidic/ basic silica and alumina, florisil, and silica gel either alone or in combination with another sort of sorbent. Different solvents such as hexane (H), dichloromethane (DCM), with different compositions were used to elute the PCBs target compounds from the spiked fish samples. Overall the mean percentage recoveries for all PCBs congeners using PLE were ranging from 78.6% to 98.7%;from 79.4% to 91.8%;from 65.8% to 104.5% and from 82.4% to 100.9% for cases A, B, C, D and E, respectively. However, the overall mean percentage recoveries for the 13C-PCBs surrogate including: 101, 138, 153, 180 and 209 were ranging from 88.2% to 97.6%;from 79.4% to 90.2%, from 88.3% to 96.4%, from 79.8% to 90.4% and from 83.9% to 95.9%, for cases A, B, C, D and E, respectively. The limits of detection of the proposed method were varied from 0.01 to 0.28 ng/g (w/w) for different PCBs congeners. The proposed method has linear dynamic range from 21.5 ng/g to 109 ng/g. This method was applied to fish samples for the determination of the target PCBs components.