Dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates

Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.

The microstructure evolution and deformation mechanism in a casting AM80 magnesium alloy under ultra-high strain rate loading

Ultra-high strain rate impact tests were conducted by Split-Hopkinson pressure bar to investigate the microstructure evolution and impact deformation mechanism of a solution treated casting AM80 Mg alloy at 25, 150 and 250 ℃ with a strain rate of 5000 s^(-1). The microcrack and dynamic recrystallization(DRX) preferentially nucleate at grain boundary(GB) and twin boundary(TB), especially at the intersections between GBs and TBs, and then propagate along twin direction. In contrast, the adiabatic shear bands preferentially occur at high-density twined regions. At 25 ℃, the dominated deformation mechanisms are basal slip and twinning. As deformation temperature increases to 150and 250℃, the deformation gradually shifts to be dominated by a coordinated mechanism among non-basal slip, twinning and DRX. The flow stress behavior and deformation mechanism indicate that the degree of decrease in flow stress with temperature is associated with the change of deformation mode.

SCC evaluation of ultra-high strength steel in acidic chloride solution

The stress corrosion crack （SCC） susceptibility of ultra-high strength steel AerMet 100 was investigated by slow strain rate technique （SSRT）, tensile with polarization and surface analysis technique. The curves of tf^Cl/tf^W -strain rate are divided into three regions： stress-dominated region, SCC-dominated region, and corrosion-dominated region, so as the curves of εf^Cl/εf^W - strain rate and tm/tf-strain rate. The results of tensile tests with polarization show that the main SCC mechanism of AerMet 100 is anodic dissolution, which controls the corrosion process. The three regions have been discussed according to the relationship between the rate of slip-step formation and the rate of dissolution. Fracture appearances in different environments were analyzed by scanning electron microscopy （SEM）. SCC fracture appears as a mixture of intergranular and dimples, while it is totally dimples in the inert environment. The εf becomes the parameter to predict tf because the relationship between εf^Cl/εf^W and tf^Cl/tf^w is a straight line for AerMet 100.

MICROSTRUCTURAL CHARACTERISTICS ASSOCIATED WITH HIGH- STRAIN-RATE PLASTIC DEFORMATION IN THE ELECTROFORMED COPPER LINER OF SHAPED CHARGES

The microstructures of electroformed copper liners of shaped charges that had undergone high-strain-rate deformation were observed by optical microscopy （OM） and scanning electron microscopy （SEM）. Meanwhile, the orientation distribution of the grains in the recovered jet was examined by electron backscattering Kikuchi pattern （EBSP） technique. EBSP analysis reveals that the fibrous texture observed in the as-electroformed copper liners disappeared after explosive detonation deformation. OM observation shows that the microstructure evolves system- atically from the jet center to its perimeter during cooling from high temperatures after explosive detonation deformation. This microstructural characteristic is similar to that of solidification, i.e. there exist equiaxed grains in the center of the jet and significant columnar grains around the equiaxed grains. The result reveals that there is melting-related phenomenon in the jet center. Corresponding microhardness variations from the jet center to its perimeter is also determined. All the phenomena can be explained by a strong gradient of temperature across the section of the jet during plastic deformation at high-strain-rate.

通信阀控铅酸蓄电池维护的问题与对策

加强对电厂通信阀控铅酸蓄电池维护和管理的研究,有利于提高通信蓄电池的维护和管理水平,具有重要的现实意义。针对在通信蓄电池维护工作中出现的各类安全和技术问题,提出通信蓄电池维护的具体措施,总结一套完整可靠的运维管理经验,对提高厂内通信系统安全运行水平具有重大意义。

阀控免维护铅酸蓄电池循环特性的研究

采用高倍率放电循环试验方法,研究了阀控免维护铅酸蓄电池在循环过程中端电压和容量的变化规律。试验结果表明,试验温度对蓄电池循环放电深度有较大的影响。在1 h放电循环试验中,蓄电池C1容量与C10容量几乎同步下降,蓄电池组提早失效的原因之一是电池内各单体动态一致性变差,循环后期蓄电池容量受正极容量控制。因此,在现有技术水平的前提下,改善充电接受能力,提高动态均匀一致性,是延长蓄电池使用寿命的有效途径之一。

Novel MAC protocol for terahertz ultra-high data-rate wireless networks

Due to having a large bandwidth to support Gbps-level data rate, terahertz communication attracts more and more attention in recent years. However, there are few medium access control （MAC） protocols for terahertz ultra-high data-rate wireless networks, which affects the research and application of terahertz communications. To address this problem and to achieve ultra-high data-rate wireless access with terahertz communication, a novel MAC protocol, called medium access control for terahertz communication （MAC-TC）, is proposed. Through designing a new channel access scheme, a new superframe structure, and related key parameters, MAC-TC can support a maximum data rate up to 10 Gbit/s even higher. Theoretical analysis and simulation results show that our proposed MAC protocol realizes the function of medium access control and attains a maximum data rate of 18.3 Gbit/s, which is 2 times higher than 5.78 Gbit/s, the theoretical maximum data rate of IEEE 802.15.3c standard.

超高倍率阀控铅酸蓄电池的设计及试验

介绍了一种超高倍率阀控铅酸蓄电池的设计及试验。放电倍率达到27C，用于发动机起动或汽车应急起动。文章通过理论分析，进行设计，并试制了一种6FM3的超高倍率阀控蓄电池，获得了满意的放电结果。

Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures

During high speed machining in the field of manufacture,chip formation is a severe plastic deformation process including large strain,high strain rate and high temperature.And the strain rate in high speed cutting process can be achieved to 105 s^（-1）.30CrMnSiNi2Asteel is a kind of important high-strength low-alloy structural steel with wide application range.Obtaining the dynamic mechanical properties of30CrMnSiNi2Aunder the conditions of high strain rate and high temperature is necessary to construct the constitutive relation model for high speed machining.The dynamic compressive mechanical properties of30CrMnSiNi2Asteel were studied using split Hopkinson pressure bar（SHPB）tests at 30-700°C and3000-10000s^（-1）.The stress-strain curves of 30CrMnSiNi2Asteel at different temperatures and strain rates were investigated,and the strain hardening effect and temperature effect were discussed.Experimental results show that 30CrMnSiNi2Ahas obvious temperature sensitivity at 300°C.Moreover,the flow stress decreased significantly with the increase of temperature.The strain hardening effect of the material at high strain rate is not significant with the increase of strain.The strain rate hardening effect is obvious with increasing the temperature.According to the experimental results,the established Johnson-Cook（J-C）constitutive model of 30CrMnSiNi2Asteel could be used at high strain rate and high temperature.

SCC investigation of low alloy ultra-high strength steel 30CrMnSiNi2A in 3.5wt% NaCl solution by slow strain rate technique

To evaluate stress corrosion cracking（SCC） mechanism of low alloy ultra-high strength steel 30CrMnSiNi2 A in environment containing NaCl, SCC behavior of the steel in 3.5wt% NaCl solution is investigated by slow strain rate technique（SSRT） with various strain rates and applied potentials, surface analysis technique, and electrochemical measurements. SCC susceptibility of the steel increases rapidly with strain rate decreasing from 1 · 10 5s 1to 5 · 10 7s 1, and becomes stable when strain rate is lower than 5 · 10 7s 1. SCC propagation of the steel in the solution at open circuit potential（OCP） needs sufficient hydrogen which is supplied at a certain strain rate.Fracture surface at OCP has similar characteristics with that at cathodic polarization 1000 mVSCE, which presents characteristic fractography of hydrogen induced cracking（HIC）.All of these indicate that SCC behavior of the steel in the solution at OCP is mainly controlled by HIC rather than anodic dissolution（AD）.

miniSCIDOM: a scintillator-based tomograph for volumetric dose reconstruction of single laser-driven proton bunches

Laser plasma accelerators(LPAs)enable the generation of intense and short proton bunches on a micrometre scale,thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material analysis.Being spectrally broadband,laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample properties.The rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm^(3) for single proton bunches to allow for fast online feedback.Here we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm^(3).The detector achieves a spatial resolution below 500μm and a sensitivity of 100 mGy.The detector performance is tested at a proton therapy cyclotron and an LPA proton source.The experiments’primary focus is the characterization of the scintillator’s ionization quenching behaviour.

Experimental Investigations of Laser-induced Spall in Metallic Targets

1 Introduction The phenomena of laser-induced spall in metals have been reported in only a few papers, and most work was concentrated on aluminum and copper. Since the pulse intense laser can generate ultra-high strain rates more than 107 s-1, it becomes almost the unique means in laboratories for investigation of fracture behavior and mechanisms of materials under such extreme conditions. In this note, the preliminary results of spall