Gaoshiti-Moxi structure belt of An-Yue Sinian gas reservoir, which was China’s largest monomer Marine carbonate gas reservoir up to now, located in vying-dragon female temple structure group that belong to the ancien...Gaoshiti-Moxi structure belt of An-Yue Sinian gas reservoir, which was China’s largest monomer Marine carbonate gas reservoir up to now, located in vying-dragon female temple structure group that belong to the ancient uplift slope of the middle of Sichuan. With the exploration and development of high temperature and high pressure carbonate reservoir, a large number of challenges and problems, such as long isolation section, active oil-gas show, large temperature difference, prone to super retarding cement slurry and gas channeling at flare position, have been encountered in the cementing of 177.8 mm hang-liner. In order to solve these problems, numerous measures and methods have been put into use for reducing the safety risk of cementing and improving cementing quality. The large temperature difference channeling cement slurry system, effective anti-pollution spacer and high-pressure packer type liner hanger were developed and applied for field tests in the early stage of development. In addition, equilibrium pressure cementing technology, optimizing of centralizer placement and plasma column structure, improvement of pump displacement and hold pressure while waiting on cement were used to ensure nice displacement efficiency and cementing quality. As Moxi X well for example, the cementing quality factor of merit was 40.29% and the qualification rate was up to 78.87% after adopting the cementing measures and methods above. The cementing quality was much higher than previous level and provided technical support for Gaoshiti-Moxi area.展开更多
Based on a shallow roadway with weakly cemented soft strata in western China, this paper studies the range and degree of plastic zones in soft strata roadways with weak cementation. Geological radars were used to moni...Based on a shallow roadway with weakly cemented soft strata in western China, this paper studies the range and degree of plastic zones in soft strata roadways with weak cementation. Geological radars were used to monitor the loose range and level of surrounding rocks. A mechanical model of weakly cemented roadway was established, including granular material based on the measured results. The model was then used to determine the plastic zone radium. The predicted results agree well with measured results which provide valuable theoretical references for the analysis of surrounding rock stability and support reinforcing design of weakly cemented roadways. Finally, a combined supporting scheme of whole section bolting and grouting was proposed based on the original supporting scheme. It is proved that this support plan can effectively control the deformation and plastic zone expansion of the roadway surrounding rock and thus ensure the long-term stable and safe mining.展开更多
Many measures, such as water injection, acid fracturing, thermal recovery, have been taken in the oilfield development. These can easily induce brittle fracture of set cement. Most of all, there are greater potential ...Many measures, such as water injection, acid fracturing, thermal recovery, have been taken in the oilfield development. These can easily induce brittle fracture of set cement. Most of all, there are greater potential for fractures in set cement in slim holes. Therefore, it is necessary to improve the toughness of the cement mantle. Results obtained from experiments show that carbon fiber, with a concentration of 0.12%-0.19% in cement and a length of 700 to 1,400μm, plays an important role in improving cement quality. Addition of carbon fiber can improve the bending strength of set cement by up to 30%. At the same time, the increase in fiber concentration can lower the elastic modulus and increase the Poisson＇s ratio of set cement. Thin-section analysis shows that fiber can effectively prevent the propagation of fractures and enhance the plasticity of the matrix and the ability to prevent fracture.展开更多
文摘Gaoshiti-Moxi structure belt of An-Yue Sinian gas reservoir, which was China’s largest monomer Marine carbonate gas reservoir up to now, located in vying-dragon female temple structure group that belong to the ancient uplift slope of the middle of Sichuan. With the exploration and development of high temperature and high pressure carbonate reservoir, a large number of challenges and problems, such as long isolation section, active oil-gas show, large temperature difference, prone to super retarding cement slurry and gas channeling at flare position, have been encountered in the cementing of 177.8 mm hang-liner. In order to solve these problems, numerous measures and methods have been put into use for reducing the safety risk of cementing and improving cementing quality. The large temperature difference channeling cement slurry system, effective anti-pollution spacer and high-pressure packer type liner hanger were developed and applied for field tests in the early stage of development. In addition, equilibrium pressure cementing technology, optimizing of centralizer placement and plasma column structure, improvement of pump displacement and hold pressure while waiting on cement were used to ensure nice displacement efficiency and cementing quality. As Moxi X well for example, the cementing quality factor of merit was 40.29% and the qualification rate was up to 78.87% after adopting the cementing measures and methods above. The cementing quality was much higher than previous level and provided technical support for Gaoshiti-Moxi area.
基金provided by the National 973 Programs(No.2014CB046905)the National Natural Science Foundation of China(Nos.51274191 and 51404245)+1 种基金the Doctoral Fund of Ministry of Education(No.20130095110018)China Postdoctoral Science Foundation(No.2014M551699)
文摘Based on a shallow roadway with weakly cemented soft strata in western China, this paper studies the range and degree of plastic zones in soft strata roadways with weak cementation. Geological radars were used to monitor the loose range and level of surrounding rocks. A mechanical model of weakly cemented roadway was established, including granular material based on the measured results. The model was then used to determine the plastic zone radium. The predicted results agree well with measured results which provide valuable theoretical references for the analysis of surrounding rock stability and support reinforcing design of weakly cemented roadways. Finally, a combined supporting scheme of whole section bolting and grouting was proposed based on the original supporting scheme. It is proved that this support plan can effectively control the deformation and plastic zone expansion of the roadway surrounding rock and thus ensure the long-term stable and safe mining.
文摘Many measures, such as water injection, acid fracturing, thermal recovery, have been taken in the oilfield development. These can easily induce brittle fracture of set cement. Most of all, there are greater potential for fractures in set cement in slim holes. Therefore, it is necessary to improve the toughness of the cement mantle. Results obtained from experiments show that carbon fiber, with a concentration of 0.12%-0.19% in cement and a length of 700 to 1,400μm, plays an important role in improving cement quality. Addition of carbon fiber can improve the bending strength of set cement by up to 30%. At the same time, the increase in fiber concentration can lower the elastic modulus and increase the Poisson＇s ratio of set cement. Thin-section analysis shows that fiber can effectively prevent the propagation of fractures and enhance the plasticity of the matrix and the ability to prevent fracture.
