Impacts of Climate Change on Seawater Temperature and Total Dissolved Solids: Challenges and Sustainable Solutions for Reverse Osmosis Desalination in the Arabian Gulf Region

This article examines the influence of seawater temperature and total dissolved solids (TDS) on reverse osmosis (RO) desalination in the Arabian Gulf region, with a focus on the impact of climate change. The study highlights the changes in seawater temperature and TDS levels over the years and discusses their effects on the efficiency and productivity of RO desalination plants. It emphasizes the importance of monitoring TDS levels and controlling seawater temperature to optimize water production. The article also suggests various solutions, including intensive pre-treatment, development of high-performance membranes, exploration of alternative water sources, and regulation of discharges into the Gulf, to ensure sustainable water supply in the face of rising TDS levels and seawater temperature. Further research and comprehensive monitoring are recommended to understand the implications of these findings and develop effective strategies for the management of marine resources in the Arabian Gulf.

A Pilot-scale Study on Coal Gasification Wastewater Reclamation Using Pretreatment Alternatives Combined with Ultrafiltration and Reverse Osmosis

Aims to investigate the performance of the pilot-scale reclamation plant for coal gasification wastewater( CGW) using ultrafiltration and reverse osmosis with appropriate pretreatment alternatives,different pre-treatment alternatives- coagulation,adsorption,and ozonation methods were employed to treat the secondary effluent of coal gasification wastewater( SECGW) in a pilot-scale pressurized membrane system. The performance was compared to choose the most suitable pre-treatment alternative for the SECGW reclamation.Ozone reaction achieved highest COD removal efficiency( 79.6%- 91.0%),resulting in the stable normalized parameters of the subsequent ultrafiltration and reverse osmoses. In contrast,the coagulation and adsorption processes achieved only 32. 8%- 45. 7% and 53. 1%- 64. 6% decreases in COD,respectively. The residual organic pollutants in the reverse osmosis feed water led to an increase in normalized pressure drop and a decrease in normalized permeability( or membrane transference coefficient). The hydrophobic fraction was the main constituent( approx. 70% of DOC) in pretreated SECGW, and the hydrophobic-neutral fraction contributed mostly to the UV absorbance( 53%). Fluorescence excitation emission matrices revealed that ozonation removed most of the hydrophobic and aromatic proteins such as tyrosine and tryptophan which dominated in raw wastewater. The recalcitrant compounds such as phenolic compounds, heterocyclic compounds,especially long-chain hydrocarbons,which were easily attached to the membrane surface and contributed to organic fouling,could be oxidized and mineralized by ozone. Among the three pretreatments,ozonation showed highest removal efficiencies of hydrophobic and aromatic proteins,therefore resulting in highest normalized permeability.

Microbial Removal from Secondary Treated Wastewater Using a Hybrid System of Ultrafiltration and Reverse Osmosis

The efficiency of advanced membranes towards removal of general and specific microbes from wastewater was investigated. The treatment included a subsequent system of activated sludge, ultrafiltration （hollow fibre membranes with 100 kDa cut-off, and spiral wound membranes with 20 kDa cut-off）, and RO （reverse osmosis）. The removal evaluation of screened microbes present in treated wastewater showed that hollow fibre membrane rejected only 1 log （90% rejection） of the TPC （total microbial count）, TC （total coliforms）, and FC （faecal coliforms）. A higher effectiveness was observed with spiral wound, removing 2-3 logs （99%-99.9%） of TPC and complete rejection of TC and FC. The RO system was successful in total rejection of all received bacteria. The removal evaluation of inoculated specific types of bacteria showed that the hollow membranes removed 2 logs （99%） of inoculated E. coli （10^7-10^8 cfu/mL inoculum）, 2-3 logs （99%-99.9%） of Enterococus spp. （10^7-10^10 cfu/mL inoculum）, 1-2 logs （90%-99%） of Salmonella （10^8-10^10 cfu/mL inoculum） and 1-2 logs （90%-99%） of Shigella （10^5-10^6 cfu/mL inoculum）. The spiral wound was significantly efficient in rejecting further 3 logs of E. coil, 5 logs of Enterococus spp., 4 logs of Salmonella, and a complete rejection of all received bacteria was accomplished by RO membrane. The results indicate that Gram positive bacteria were removed much more efficiently compared to the Gram negative ones, the rationale behind such behaviour is based on cell walls elasticity.

Performance of Nanofiltration and Reverse Osmosis Membranes in Metal Effluent Treatment

The performance of different nanofiltration （NF） and reverse osmosis （RO） membranes was studied in treating the toxic metal effluent from metallurgical industry. The characteristics and filtration behavior of the processes including the wastewater flux, salt rejection and ion rejection versus operating pressure were evaluated. Then the wastewater flux of RO membrane was compared with theoretical calculation using mass transfer models, and good consistency was observed. It was found that a high rejection rate more than 95% of metal ions and a low Chemical Oxygen Demand （COD） value of 10 mg·L^-1 in permeate could be achieved using the RO composite membrane, while the NF rejection of the salt could be up to 78.9% and the COD value in the permeate was 35 mg·L^-1. The results showed that the product water by both NF and RO desalination satisfied the State Reutilization Qualification, but NF would be more suitable for large-scale industrial practice, which offered significantly higher permeate flux at low operating pressure.

Substrate matters:The influences of substrate layers on the performances of thin-film composite reverse osmosis membranes

Thin-film composite(TFC) reverse osmosis(RO) membranes are playing the dominating role in desalination.Tremendous efforts have been put in the studies on the polyamide selective layers. However, the effect of the substrate layers is far less concerned. In this review, we summarize the works that consider the impacts of the substrates, including pore sizes, surface hydrophilicity, on the processes of interfacial polymerization and consequently on the morphologies of the active layers and on final RO performances of the composite membranes. All the works indicate that the pore sizes and surface hydrophilicity of the substrate evidently influence the RO performances of the composite membranes. Unfortunately, we find that the observations and understandings on the substrate effect are frequently varied from case to case because of the lack of substrates with uniform pores and surface chemistries. We suggest using track-etched membranes or anodized alumina membranes having relatively uniform pores and functionalizable pore walls as model substrates to elucidate the substrate effect.Moreover, we argue that homoporous membranes derived from block copolymers have the potential to be used as substrates for the large-scale production of high-performances TFC RO membranes.

Inhibition of CaCO_3 Scaling in Reverse Osmosis System by Zinc Ion

Scaling of reverse osmosis (RO) membrane surface is one of the main problems in desalination proc- esses. To mitigate scales, organic anti-scalants are often used. If the dosages of anti-scalants are reduced, by using other much cheaper scale inhibitors, RO running cost will decrease greatly. The present paper investigated the inhi- bition of CaCO3 precipitation by zinc ions in RO system. The results show that the zinc ion concentration of 2mg?L-1 was able to exert a marked suppression effect on both bulk precipitation of CaCO3 and on membrane scaling on waters of moderate hardness.

Study of reverse osmosis membranes fouling by inorganic salts and colloidal particles during seawater desalination

Fouling phenomenon is considered among the major reasons that cause significant increase of operating cost of desalination plants equipped with reverse osmosis(RO)membranes.This phenomenon is studied in the present work in the case of RO polyamide aromatic membranes using model seawater containing inorganic salts and colloidal compounds.Different solubility conditions of CaCO3 and CaSO4 were applied to study RO performances with and without colloid presence.During experiments,the membrane permeate fluxes were continuously monitored.Moreover,studies of chemical composition,structure,and morphology of the materials deposited on the membrane surface were conducted using energy dispersive microanalysis(EDS)X-ray diffraction and scanning electronic microscopy(SEM).Results show that in conditions of calcium carbonate oversaturation there is a reduction in the permeate flow of 11.2%due to fouling of the membrane by the precipitation of this compound.While in the same conditions of calcium sulphate oversaturation the reduction of the flow is 5%,so we can conclude that in conditions of oversaturation of both salts,calcium carbonate produces a greater fouling of the membrane that in its view causes greater decrease in the flow of permeate.All this based on the results of the test with both salts in oversaturated conditions.Resulting in the formation of calcite and gypsum crystals onto the membranes as XRD analyses stated.Additional presence of colloidal silica in those conditions intensifies strongly the fouling,leading until to 24.1%of permeate flux decrease.

Energy Recovery Device with a Fluid Switcher for Seawater Reverse Osmosis System

Energy recovery device （ERD） is an important part of the seawater reverse osmosis （SWRO） desalination system. There are principally two kinds of ERDs, the centrifugal type and the positive displacement （PD） type. The PD type is of extensive concern and is preferred in large-scale plants. In this article, an innovative fluid switcher was presented and a two-cylinder hydraulic energy recovery unit with a lab-scale fluid switcher was set up. Tap water was used as the working medium instead of the actual seawater and brine in SWRO desalination plants. Under steady state operating conditions, the experimental results were obtained on the variations of the pressure and flow rate to and from the energy recovery unit. The hydraulic recovery efficiency （En） of the energy recovery unit with the fluid switcher reached up to 76.83%.

Recent advances in nanofiltration,reverse osmosis membranes and their applications in biomedical separation field

In the face of human society's great requirements for health industry,and the much stricter safety and quality standards in the biomedical industry,the demand for advanced membrane separation technologies continues to rapidly grow in the world.Nanofiltration(NF)and reverse osmosis(RO)as the highefficient,low energy consumption,and environmental friendly membrane separation techniques,show great promise in the application of biomedical separation field.The chemical compositions,microstructures and surface properties of NF/RO membranes determine the separation accuracy,efficiency and operation cost in their applications.Accordingly,recent studies have focused on tuning the structures and tailoring the performance of NF/RO membranes via the design and synthesis of various advanced membrane materials,and exploring universal and convenient membrane preparation strategies,with the objective of promoting the better and faster development of NF/RO membrane separation technology in the biomedical separation field.This paper reviews the recent studies on the NF/RO membranes constructed with various materials,including the polymeric materials,different dimensional inorganic/organic nanomaterials,porous polymeric materials and metal coordination polymers,etc.Moreover,the influence of membrane chemical compositions,interior microstructures,and surface characteristics on the separation performance of NF/RO membranes,are comprehensively discussed.Subsequently,the applications of NF/RO membranes in biomedical separation field are systematically reported.Finally,the perspective for future challenges of NF/RO membrane separation techniques in this field is discussed.

Development and Extension of Seawater Desalination by Reverse Osmosis

Seawater desalination has been peoples fond dream since ancient times, the dream is now becoming a reality. This paper presents a brief development history of reverse osmosis. Much attention was paid to innovative development in membranes, modules, equipments and applied technology, including asymmetric and composite membranes, spiral-wound element and hollow fiber module, energy recovery equipments and different technological processes. The extension of reverse osmosis, such as desalination, pre-concentration, integrated processes and nanofiltration, is also briefly mentioned.

Studies on Feasibility of Reverse Osmosis (Membrane) Technology for Treatment of Tannery Wastewater

Tanneries reusing wastewater by combination of conventional and advanced Reverse Osmosis (RO) treatment technologies were assessed for technical and economic viabilities. Conventional treatment methods such as neutralization, clari-flocculation and biological processes are followed to clean the effluents before feeding to RO membrane modules. The characteristics of untreated composite effluents such as pH, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), total dissolved solids (TDS), and total chromium were in the range of 4.00-4.60, 680-3600 mg/L, 1698-7546 mg/L, 980-1480 mg/L, 4200-14500 mg/L, and 26.4-190 mg/L, respectively. Inorganic ions like Ca2+, Na+, Cl– and SO42– were found more in the wastewaters. Conventional treatments significantly removed the organic pollutants however failed to remove dissolved inorganic salts. Membrane technology removed the salts as well as remaining organic pollutants and the product water is reused in the process. The studied tanneries (5 numbers) have achieved 93-98%, 92-99% and 91-96% removal of TDS, sodium and chloride, respectively. Seventy to eighty five percentage of wastewater was recovered and recycled in the industrial processes. The rejects are subject to either solar evaporation system or Multiple Effect Evaporation (MEE) technology. The resulting salts are collected in polythene bags and disposed into scientifically managed secured land fill (SLF) site. The cost of wastewater treatment for operation and maintenances of RO including the pre-treatments (conventional methods) is INR 100-110 m-3.

Performance of Nanofiltration (NF) and Low Pressure Reverse Osmosis (LPRO) Membranes in the Removal of Fluorine and Salinity from Brackish Drinking Water

Certain areas in Senegal have a serious problem of high fluoride and salinity in underground water because of soil properties. This water currently used for drink has a bad taste on consumption and caused diseases like dental fluorosis and skeletal fluorosis. A membrane filtration plant constructed by Pall Corporation was improved through nanofiltration (NF) and Low Pressure Reverse Osmosis (LPRO). Both NF and LPRO membranes were shown applicable for salinity and fluoride ions removal from brackish and high fluorinated drinking water in a remote community. The NF membrane has given a fluorine retention rate varying between 63.3% and 71% while the LPRO membrane allow to reach 97 to 98.9% for fluorine rejection. Highest salinity rejection rates expressed through conductivity measurements are around 46% and 97% for respectively NF and LPRO.

Research Progress of Brackish Water Desalination by Reverse Osmosis

Brackish water (BW) desalination is a primary path to relieve the shortage of water. As one of the BW desalination methods, reverse osmosis (RO) technology has advantage for both technology and process procedure. The expounding of this research studied or reviewed recent years, reverse osmosis membrane, energy recovery, new energy and application technology in BW desalination of RO at home and abroad. Wind power and solar energy can be combined with energy recovery device for RO. The research also explains that BW desalination by RO is practical and feasible in some areas in China.

STUDIES ON REVERSE OSMOSIS SEPARATION OF AQUEOUS ORGANIC SOLUTIONS BY PAA/PSF COMPOSITE MEMBRANE

The reverse osmosis (RO) separation of aqueous organic solutions, such as alcohols, amines, aldehydes, acids, ketones, and esters etc., by PAA (polyacrylic acid)/PSF (polysulfone) composite membrane has been studied. It was found that the separation results for aliphatic alcohols, amines and aldehydes are satisfactory, the solute rejection (R-a) and the volume fluxes of solutions (J(V)) for 1000 ppm ethanol, ethylamine and ethyl aldehyde are 66.2%, 61.0%, 84.0% and 0.90 x 10(-6), 0.35 x 10(-6), 0.40 X 10(-6) m(3)/m(2) . s, respectively, at 5.0 MPa and 30 degrees C. R-a increased with increasing molecular weights of alcohols, amines and aldehydes, and the R-a for n-amyl alcohol, n-butylamine and n-butyl aldehyde reached 94.3%, 88.6% and 96.0%, respectively. Satisfactory separation results (R-a > 70%) for ketones, esters, phenols and polyols have been obtained with the PAA/PSF composite membrane. The effect of operating pressure on the properties of reverse osmosis has also been investigated. Analysis of experimental data with Spiegler-Kedem's transport model has been carried out and the membrane constants such as reflection coefficient sigma, solute and hydraulic permeabilities omega and L-p for several organic solutes have been obtained.

Biological Treatability of Low Total Dissolved Solids (LTDS) Using SBR as a Pre-Treatment for Reverse Osmosis

Huge quantity of effluents is generated from pharmaceutical industries attributed to their wide array of manufacturing and maintenance processes. Wastewaters from pharmaceuticals are characterized by the presence of solids, pH, temperature, biodegradable organic compounds, unusual turbidity, hardness and conductivity. Wastewater from pharmaceutical industry arising from various units is categorised as low total dissolved solids (LTDS) and high total dissolved solids (HTDS) based on the concentration of total dissolved solids. The present study focuses on treatment of LTDS using a combination of biological treatment followed by membrane process, reverse osmosis. This research presents the results from the pilot-scale studies focussed on biological treatment using SBR as pre-treatment for RO towards the removal of LTDS effluent. Three-month data on a daily basis is presented. The efficiency of the process was tested with a reduction in parameters like total dissolved solids and chemical oxygen demand. SBR tested for its suitability as a preliminary treatment for the Reverse Osmosis process during the months of August-October. The highest and lowest TDS reduction was recorded as 9.72% and ?4.67% in the month of August. The highest and least COD reduction was recorded as 87.28% and 80.66% in the same month. The highest and lowest TDS reduction was recorded as 0.84% and ?7.92% in the month of September. The highest and least COD reduction was recorded as 87.07% and 83.28% in the same month. The performance of RO tested for its efficiency in removing the TDS and COD after SBR as pre-treatment. The highest and lowest TDS reduction was recorded as 94.93% and 93.27% in the month of August. The highest and least COD reduction was recorded as 96.84% and 90.19% in the same month. The highest and lowest TDS reduction was recorded at 96.53% and 91.25% in the month of October. The highest and least COD reduction was recorded as 94.31% and 72.57% in the same month. SBR has proved to be a promising solution for pre-treatment removing all substances that might result in membrane fouling. Hence, the present study concludes that a combination of SBR and RO will be a promising solution for effective removal of TDS and COD from pharmaceutical wastewaters.

A Pilot-scale Demonstration of Reverse Osmosis Unit for Treatment of Coal-bed Methane Co-produced Water and Its Modeling

This study presents the first demonstration project in China for treatment of coal-bed methane(CBM) co-produced water and recycling.The work aims to provide a research and innovation base for solving the pollution problem of CBM extraction water.The reverse osmosis(RO) unit is applied to the treatment of CBM co-produced water.The results indicate that system operation is stable,the removal efficiency of the total dissolved solids(TDS) is as high as 97.98%,and Fe,Mn,and F-are almost completely removed.There is no suspended solids(SS) detected in the treated water.Furthermore,a model for the RO membrane separation process is developed to describe the quantitative relationship between key physical quantities-membrane length,flow velocity,salt concentration,driving pressure and water recovery rate,and the water recovery restriction equation based on mass balance is developed.This model provides a theoretical support for the RO system design and optimization.The TDS in the CBM co-produced water are removed to meet the "drinking water standards" and "groundwater quality standards" of China and can be used as drinking water,irrigation water,and livestock watering.In addition,the cost for treatment of CBM co-produced water is assessed,and the RO technology is an efficient and cost-effective treatment method to remove pollutants.

Deep Learning Based Model Predictive Control for a Reverse Osmosis Desalination Plant

Reverse Osmosis (RO) desalination plants are highly nonlinear multi-input-multioutput systems that are affected by uncertainties, constraints and some physical phenomena such as membrane fouling that are mathematically difficult to describe. Such systems require effective control strategies that take these effects into account. Such a control strategy is the nonlinear model predictive (NMPC) controller. However, an NMPC depends very much on the accuracy of the internal model used for prediction in order to maintain feasible operating conditions of the RO desalination plant. Recurrent Neural Networks (RNNs), especially the Long-Short-Term Memory (LSTM) can capture complex nonlinear dynamic behavior and provide long-range predictions even in the presence of disturbances. Therefore, in this paper an NMPC for a RO desalination plant that utilizes an LSTM as the predictive model will be presented. It will be tested to maintain a given permeate flow rate and keep the permeate concentration under a certain limit by manipulating the feed pressure. Results show a good performance of the system.

Economic and Technical Analysis of a Reverse-Osmosis Water Desalination Plant Using DEEP-3.2 Software

Reverse osmosis （RO） is proved to be the most reliable, cost effective, and energy efficient in producing fresh water compared to other desalination technologies. It is the fastest-growing desalination technology with a greater number of installations around the world. The economic and technical performance of a medium-capacity RO desalination plant （2,000 m^3/day） proposed to be installed in Umm Qasr city south of Basra, Iraq is analyzed using DEEP-3.2 software created by the International Atomic Energy Agency （IAEA）. This port city is located on the Gulf shore and does not have any fresh water resources. The analysis shows that the cost of fresh water produced by this plant is US$0.986/m^3 with a good quality of fresh water （279 ppm）, which is a reasonable price for this remote area. The analysis also shows an increase in water production cost of about 12% at increased electricity price from 0.06 to 0.1 US$/kWh, 53% when the seawater salinity increased from 35,000 to 45,000 ppm, 2.5% when the seawater temperature decreased from 33 ℃ to 20 ℃, and 0.71% when the interest rate increased from 0% to 5%. Pumping fresh water from the Basra purification plant （located 175 km north of Umm Qasr） is 22.16 times the cost and 236.7% poorer quality than the fresh water produced by the RO plant.

Correlations between silt density index,turbidity and oxidation-reduction potential parameters in seawater reverse osmosis desalination

The reverse osmosis method is one of the most widely used methods of seawater desalination at present.Hydrophilic and desalting membranes in reverse osmosis systems are highly susceptible to the input pollutants.Various contaminants,including suspended organic and inorganic matter,result in membrane fouling and membrane degradation.Fundamental parameters such as the turbidity,the amount of chlorine injection,and silt density index (SDI) are the most predominant parameters of fouling control in the membranes.In this study,the operation system included a water intake unit,a pretreatment system,and an RO system.The pretreatment system encompassed a clarifier,a gravity sand filter,pressurized sand filters,and a cartridge filter.The correlation between the amount of chlorine injection in terms of the oxidation-reduction potential (ORP) and the SDI value of the input water was investigated at a specified site next to the Persian Gulf.The results showed that,at certain intervals of inlet turbidity,injection of a certain amount of chlorine into the raw water has a distinct effect on the decrease of SDI.

Application of Activated Carbon in the Removal of COD in Zero-emission Reverse Osmosis Concentrate

For further reducing the load of subsequent processing,the activated carbon adsorption method was used to remove organic compounds from reverse osmosis water concentrate,and the influence of variety of activated carbon,residence time,dosage of activated carbon and p H on the removal rate of COD was studied.The results show that the removal rate of COD was up to 61.8%under the conditions of influent p H=6,400 ml water,30 min of residence time and 1.5 g of 2#activated carbon as the adsorbent.In the dynamic adsorption experiment and field application,the adsorption tower was loaded with 40 tons of 2#activated carbon,and the inflow of influent water was 100 m^3/h;average COD was 142 mg/L,and p H was 8.04;the residence time was 36 min.Under the above conditions,when effluent COD was less than 60 mg/L,the adsorption capacity of activated carbon was up to 1330 m^3/t.