The present study deals with the development of a low carbon high strength steel by thermomechanical controlled processing on a pilot scale.The continuous cooling transformation has yielded a flat top "C" cu...The present study deals with the development of a low carbon high strength steel by thermomechanical controlled processing on a pilot scale.The continuous cooling transformation has yielded a flat top "C" curve with the phase field occupied by a mixture of bainite and martensite.The microstructure of water quenched steel essentially consists of highly dislocated lath martensite along with fine (Ti,Nb)CN precipitates and twins.High strength steel with 1217-1298 MPa yield strength and 1372-1513 MPa ultimate tensile strength along with 16-12% total elongation has been obtained in the range of 850 to 750℃ finish rolling temperature.The impact toughness value in the range of 45-72J was also achieved in the present steel.展开更多
Precipitation of multiple strong nanoprecipitates is crucial for the development of ultrahigh-strength structural materials with a strength of 2.5 GPa or above.Nevertheless,the ductility usually loses rapidly with str...Precipitation of multiple strong nanoprecipitates is crucial for the development of ultrahigh-strength structural materials with a strength of 2.5 GPa or above.Nevertheless,the ductility usually loses rapidly with strength due to limited dislocation mobility and high cracking tendency if coarse non-deformable precipitates are employed.Herein,we report a 2.5 GPa maraging steel strengthened by an ultrahigh den-sity of intermeshed shearable nanostructures consisting of Ni(Al,Fe)nanoprecipitates and Mo-rich(∼30 at.%)disordered clusters,both of which assume coherent interfaces.The fully coherent B2-Ni(Al,Fe)par-ticles precipitate in an extremely fast fashion,effectively accelerating local aggregation of low-diffusivity Mo atoms and promoting the formation of Mo-rich clusters surrounding them.This elemental partition was found to be further enhanced by Co addition via depleting both residual Al and Mo within the ma-trix,leading to the formation of copious yet fine intermeshed nanostructures.During plastic deformation,the interlocked nanostructures not only enhance local cutting stress by combining long-range elastic and short-range chemically ordering effects but also improve dislocation activity and resist shear-induced plastic instability.The multiple shearable nanostructures endow decent ductility(>6%)of the 2.5 GPa steel,suggesting a new paradigm for designing ultrastrong steels.展开更多
文摘The present study deals with the development of a low carbon high strength steel by thermomechanical controlled processing on a pilot scale.The continuous cooling transformation has yielded a flat top "C" curve with the phase field occupied by a mixture of bainite and martensite.The microstructure of water quenched steel essentially consists of highly dislocated lath martensite along with fine (Ti,Nb)CN precipitates and twins.High strength steel with 1217-1298 MPa yield strength and 1372-1513 MPa ultimate tensile strength along with 16-12% total elongation has been obtained in the range of 850 to 750℃ finish rolling temperature.The impact toughness value in the range of 45-72J was also achieved in the present steel.
基金This research was supported by the National Key Research and Development Program of China(nos.2022YFB3705201 and 2022YFB4602101)National Natural Science Foundation of China(nos.51971018,U20B2025,11790293,52225103,51871016,51971017,52071024,52271003)+3 种基金the Funds for Creative Research Groups of NSFC(51921001)Projects of International Cooperation and Exchanges of NSFC(nos.51961160729,52061135207)111 Project(no.BP0719004)Program for Changjiang Scholars and In-novative Research Team in University of China(no.IRT_14R05),and the Fundamental Research Funds for the Central Universities of China:FRF-MP-20-43Z(JSH),FRF-TP-22-130A1(ZXB),FRF-TP-22-001C2(WY).
文摘Precipitation of multiple strong nanoprecipitates is crucial for the development of ultrahigh-strength structural materials with a strength of 2.5 GPa or above.Nevertheless,the ductility usually loses rapidly with strength due to limited dislocation mobility and high cracking tendency if coarse non-deformable precipitates are employed.Herein,we report a 2.5 GPa maraging steel strengthened by an ultrahigh den-sity of intermeshed shearable nanostructures consisting of Ni(Al,Fe)nanoprecipitates and Mo-rich(∼30 at.%)disordered clusters,both of which assume coherent interfaces.The fully coherent B2-Ni(Al,Fe)par-ticles precipitate in an extremely fast fashion,effectively accelerating local aggregation of low-diffusivity Mo atoms and promoting the formation of Mo-rich clusters surrounding them.This elemental partition was found to be further enhanced by Co addition via depleting both residual Al and Mo within the ma-trix,leading to the formation of copious yet fine intermeshed nanostructures.During plastic deformation,the interlocked nanostructures not only enhance local cutting stress by combining long-range elastic and short-range chemically ordering effects but also improve dislocation activity and resist shear-induced plastic instability.The multiple shearable nanostructures endow decent ductility(>6%)of the 2.5 GPa steel,suggesting a new paradigm for designing ultrastrong steels.
