Ultrasonic-Assisted Extraction of Fucoxanthin from Marine Macroalga Padina australis:Optimization,Bioactivity,and Structural Characterization

Macroalgae serve as a potential feedstock for fucoxanthin extraction.Fucoxanthin,a bioactive pigment found in the chloroplasts of marine algae,exhibits significant pharmacological properties.As a member of the carotenoid family,fucoxanthin plays a crucial role in both the food and pharmaceutical industries.This research explores the effects of ultrasonics on the extraction of fucoxanthin from the marine macroalga Padina australis.In addition,various extraction techniques and the influence of solvents on the efficient separation of fucoxanthin from algae have been studied and compared.Using methanol,chloroform,and a combination of methanol and chloroform(1:1,v/v),conventional fucoxanthin extraction from Padina australis yielded 8.12 mg of fucoxanthin per gram of biomass.However,the ultrasonic-assisted extraction resulted in a significantly higher yield of 16.9 mg of fucoxanthin per gram of biomass,demonstrating that the use of ultrasonics enhances the extraction rate compared to conventional methods.Therefore,the efficient separation of fucoxanthin from Padina australis is highly dependent on ultrasonic-assisted extraction.The process conditions for the extraction were optimized to maximize the yield of fucoxanthin from seaweeds.The following parameters were selected for optimization studies:moisture content,particle size,mixing speed,extraction temperature,extraction duration,and solid-to-solvent ratio.The extracted fucoxanthin exhibited various biological activities,including antimicrobial and antioxidant properties,and its structure was elucidated through FTIR and NMR spectroscopy.Additionally,thin-layer chromatography of the crude algae extracts confirmed the presence of fucoxanthin in the marine algae.Given these findings,the optimized extraction process holds the potential for scaling up to large-scale fucoxanthin production.Fucoxanthin,as a potent pharmacological agent,offers promising applications in the treatment of various ailments.

Analysis of Ultrasonic Emulsification Surgery and Small Incision Cataract Extracapsular Extraction Surgery for Cataract Clinical Treatment Level Improvement

Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected and randomly grouped into group A(ultrasonic emulsification)and group B(small-incision extracapsular cataract extraction),with 48 cases each.Results:At 1 week,1-month,and 3 months post-operation,the visual acuity of group A was higher and the astigmatism value was lower than that of group B(P<0.05);at 12h,24h,and 48h post-operation,the intraocular pressure of group A was higher than that of group B(P<0.05);the thickness of macular area of group A was lower than that of group B at 1 week and 1-month post-operation(P<0.05).Conclusion:Ultrasonic emulsification in cataract patients was slightly better than small incision cataract extracapsular extraction in correcting astigmatism,improving visual acuity,and regulating macular thickness.However,due to the high energy of ultrasonic emulsification,the risk of complications such as high postoperative intraocular pressure was higher.Small-incision extracapsular cataract extraction has better application value in economically disadvantaged areas.

Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.

Optimal Ultrasonic Extraction of Pachyman from Jiuzihe Poria cocos

This study was conducted to extract pachyman to the greatest degree with ultrasonic technology, and to determine the content of pachyman by the phe-nol-sulfuric acid method, so as to choose the optimal technique of ultrasonic extrac-tion of pachyman. Firstly, the ultrasonic power, extraction time and solid-to-liquid ra-tio were investigated by ultrasonic extraction method. Then, on this basis, a respon-sible surface experiment was designed, to select the optimal process conditions ac-cording to the index of pachyman yield. The optimized ultrasonic water extraction conditions were as fol ow： ultrasonic power of 100 W, extraction time of 30 min, and solid-to-liquid ratio at 1：40. The Oxford cup method was used to study the an-timicrobial activity of pachyman. lt was found that pachyman could significantly in-hibit Bacilus subtilis_and Staphylococcus aureus.

Ultrasonic Assisted Extraction of Anthocyanins from Strawberry

This study aimed to explore the main factors influencing the extraction of anthocyanins from strawberry, such as solid-liquid ratio, concentration of solvent, duration of ultrasonic treatment and ultrasonic power. According to the results of sin-gle factor test, an orthogonal experiment was designed to determine the optimum extraction conditions. The effects of the four factors on anthocyanins extraction from strawberry were listed here in an decreasing order： ethanol concentration 〉 solid-liq-uid ratio〉duration of ultrasonic treatment〉ultrasonic power. And the optimal condi-tions of ultrasonic extraction of anthocyanins from strawberry were： ultrasonic treat-ment of 30 min, solid-liquid ratio of 1：15, ethanol concentration of 60% and ultra-sonic power of 300 W. Under such conditions, the content of extracted antho-cyanins was 33.247 mg/100g, which was 1.3 folds higher than that by extraction without ultrasonic treatment.

Optimization of Microwave-assisted Extraction Technology of Polyphenols from Loropetalum chinense(R. Br.) Oliv

In order to optimize the microwave-assisted extraction technology of polyphenols from Loropetalum chinense （R. Br.） Oliv., the effects of microwave power, ethanol concentration, solid to liquid ratio and extraction time on polyphenols extraction rate were investigated. On the basis of single-factor test, a four-factor and three-level orthogonal test was designed by response surface method to establish a mathematical model between the response value and various factors. The results showed that the intensity of effect of different influencing factor on polyphenols ex- traction rate ranked as microwave power＇s〉solid to liquid ratio＇s〉extraction time＇s〉 ethanol concentration＇s. The optimum microwave-assisted extraction conditions for polyphenols from L. chinense were as follows： extraction power 254 W, ethanol concentration 60%, extraction time 12.5 rain and solid to liquid ratio 1：17. Under the optimum extraction conditions, the extraction rate of polyphenols from L. chinense was 19.17%.

An experimental study exploring the influencing factors for ultrasonic-assisted extraction of flavonoid compounds from leaves of Amorpha fruticosa L.

In this paper,the ultrasonic-assisted extraction process of flavonoid compounds from leaves of Amorpha fruticosa is optimized.In single factor experiments,solid/liquid ratios,ultrasonic power,ethanol concentrations and extraction cycles were experimental factors.Box–Behnken central composite design and RSM analyzed the effects of the four factors on the yield of total flavonoids.The optimal extraction parameters were solid/liquid ratio 1:50 g/mL,ultrasonic power 316 W,ethanol concentration 50%,4 extraction cycles.In the optimized condition,the estimated value of the regression model was 66.6456 mg/g while the measured value was 66.4329 mg/g.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Extraction of Organochlorine Pesticides in Sediments Using Soxhlet,Ultrasonic and Accelerated Solvent Extraction Techniques

The application of soxhlet, ultrasonic and accelerated solvent extractiontechniques to the analysis of six organochlorine pesticides (α-HCH, β-HCH, γ-HCH, o, p'-DDT,p,p'-DDT and p,p'-DDE) in Taihu Lake sediment samples is described. It was found that the limits ofquantification ranged from 0.002 μg g^(-1) to 0.004 μg g^(-1), and the recoveries oforganochlorine pesticides with the three extraction techniques were acceptable ( 】80.7%). With amass selective detector, better results were obtained by accelerated solvent extraction usinghexane-acetone (1:1) as compared with soxhlet and ultrasonic extraction. It was shown that theaccelerated solvent extraction was the optimum technique for the analysis of organochlorinepesticides in sediments. The general features of the three extraction techniques are also presented.

Microwave-assisted extraction of polysaccharides from solanum nigrum

The microwave-assisted method was used to extract polysaccharides from solanum nigrum. The optimum experimental parameters, mechanism of the extraction and the effect of microwave-assisted extraction process on the structures of polysaccharides were investigated. The extract was analyzed by the modified phenol-sulfuric acid method at 490nm. The optimum experimental parameters were obtained by orthogonal experiments as follows: extraction time 15min, microwave radiation power 455W and the process ratio of materials mass to solvent volume 1∶20. The results show that compared with the conventional reflux extraction, the microwave-assisted extraction has a higher yield in shorter time, with no effect on the finally obtained polysaccharides as seen from the FT-IR spectra. The scanning electron microscopy images reveal that the mechanism of the extraction is related to the structural changes of the plant cells in different extracting conditions.

Microwave-assisted Extraction of Isoflavones from Belamcanda chinensis

Microwave-assisted extraction （MAE） of isoflavones from Belamcanda chinensis was studied using ethanol as the solvent. The single factor experiment and the orthogonal method were used to optimize the MAE condition. It was concluded that two doses of intermittent microwave power radiation, 300 W each for 4 rain, were needed for extraction. The mass ratio of solvent to material was 8：1 and the alcohol mass fraction was 80%. The extracted liquor was then concentrated under vacuum and degreased with petroleum ether. The yield of total isofiavones was about 8.8% and the contents of tectoridin and iridin were 67.6% and 16.3% respectively. Compared with direct-heating extraction （DHE）, MAE may shorten extracting duration, reduce solvent consumption, and improve yield and purity of isoflavones from Belamcanda chinensis.

The Optimization of Ultrasonic Extraction Technology of Total Flavonoids in Leaves of Mallotus apelta by Response Surface Analysis Methodology

[Objectives] Response surface analysis methodology was used to optimize the extraction technology of total flavonoids from Mallotus apelta leaves. [Methods] The total flavonoids were extracted using ultrasonic assisted ethanol extraction,and extraction rate of total flavonoids was taken as evaluation index. On the basis of single-factor experiment,Box-Behnken response surface methodology was employed for selecting the optimum extraction process. [Results]The optimum extraction conditions of total flavonoids were as follows: 75% of ethanol concentration,1∶ 25 of ratio of material to liquid,31 min of ultrasonic time. Under these conditions,the extraction rate of total flavonoids was 1. 115%.[Conclusions] The extraction process obtained by response surface methodology was stable,reasonable,accurate and reliable. It was a feasible method to extract the total flavonoids from M. apelta leaves.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Microwave-assisted Extraction of Effective Compounds from Traditional Chinese Herbal Medicine Ciwujia

Microwave-assisted extraction (MAE) for active ingredients in Ciwujia was studied by using ethanol as the extractant. Comparing MAE with conventional methods, the former can save the extracting time and increase the content of the active ingredients in product. As to the operation in MAE, the continuous radiation process is more convenient for the extraction for traditional Chinese medicine than the intermittent radiation process. Optimized by uniform design, MAE was proved to be an effective and novel process for extracting active ingredients in Ciwujia. The optimized MAE conditions are as follows: the microwave power is 510W, the radiation time 30min, the alcohol concentration at 80%, the ratio of solvent to solid material being 5:1, the soaking time 0.5h, and the herbal particle size is (520±19)μm.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol（1∶15,v/v）for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Microwave-assisted Micellar Extraction and Determination of Glycyrrhizic Acid and Liquiritin in Licorice Root by HPLC

The feasibility of emploving non-ionic surfactant （Triton X-100） as an alternative and effective solventfor the microwave-assisted extraction of glycyrrhizic acid （GA） and liquiritin （LQ） from licorice root was studied.The optimal extraction parameters based on the microwave-assisted micellar extraction technique were determined.Under the optimal conditions, i.e. 5% （by volume） Triton X-100, microwave-assisted extraction for 3--5min at 373K, the percentage extraction of active ingredients reached the highest value. The preconcentration tactor for GA and L＇Q （about 13.5） and the extraction efficiency for these two ingredients approached 100% showed the coupling of microwave-assisted extraction and cloud-point extraction could be employed as a new and. effective techniquefor the rapid extraction and preconcentration of pharrnacologically active ingredients from medicinal plants SUCh aslicorice root without disturbing chromatographic analysis.

Study on Ultrasonic Extraction of Total Flavonoids from Angelica keiskei Koidzumi

[Objective] This study aimed to optimize the ultrasonic extraction process of total flavonoids from Angelica keiskei Koidzumi. [Method] Using the yield of total flavonoids as an indicator, the ultrasonic extraction process of total flavonoids from A. keiskei was optimized by orthogonal experimental design. [ Result ] Among four factors in orthogonal experimental design, extraction time exhibited the most significant effect on the extraction result; ethanol concentration exhib- ited a significant effect on the extraction result; ultrasonic power and solid-to-liquid ratio had no significant effect. The optimal conditions for ultrasonic extraction of total flavonoids from A. keiskei were extraction time of 25 min, ethanol concentration of 80%, ultrasonic power of 60 W, solid-to-liquid ratio of 1：20 （g/ml）, under which the yield of total flavonoids reached 1.56%. [ Conclusion] This study provides the basis for further development and utilization of total flavonoids from A. keiskei.

Feature extraction of wood-hole defects using wavelet-based ultrasonic testing

The primary bottleneck to extracting wood defects during ultrasonic testing is the accuracy of identifying the wood defects. The wavelet energy moment was used to extract defect features of artificial wood holes drilled into 120 elm samples that differed in the number of holes to verify the validity of the method. Wavelet energy moment can reflect the distribution of energy along the time axis and the amount of energy in each frequency band,which can effectively extract the energy distribution characteristics of signals in each frequency band; therefore,wavelet energy moment can replace the wavelet frequency band energy and constitute wood defect feature vectors. A principal component analysis was used to normalize and reduce the dimension of the feature vectors. A total of 16 principal component features were then obtained, which can effectively extract the defect features of the different number of holes in the elm samples.

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.