Effect of 2-butyne-1, 4-diol on silver electrodeposition from 5, 5-dimethyl hydantoin solutions

The effect of 2-butyne-1, 4-diol on silver electrodeposition process from 5, 5-dimethyl hydantoin solutions was investigated by means of cyclic voltammetric measurement, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Cyclic voltammetric studies indicate that the reduction process of silver electrodeposition is influenced by adding 2-butyne-1, 4-diol. Owing to its adsorption on the electrode surface, 2-butyne-1, 4-diol moderately hinders the mass transfer of the silver complexed ions from the bulk solution to the outer limit of the electrode double layer and affects the electrocrystallization step. Scanning electron microscopy analysis reveals that the presence of 2-butyne-1, 4-diol in the electrolyte is beneficial and the silver deposits obtained are smoother, more compact and more leveled. X-ray diffraction analysis of the silver deposits obtained at 0.5 g·L-1 2-butyne-1, 4-diol indicated that the (110) plane is the most preferred plane and is not affected by the presence of 2-butyne-1, 4-diol in the electrolyte.

Synthesis and Crystal Structure of N1-(2-(4-Bromo-2-nitrophenoxy)-2-dimethyl acyloxymethyl)-5-fluorouracil

The title compound N1-（2-（4-bromo-2-nitrophenoxy）-2-dimethyl acyloxymethyl）-5-fluorouracil（C15H13BrFN3O7, Mr = 446.19） was synthesized and structurally characterized by ^1H-NMR, -（13）C-NMR, ESI-MS and single-crystal X-ray diffraction. The compound crystallizes in triclinic, space group P1, with a = 8.3325（6）, b = 10.1808（13）, c = 11.8194（16） A, α = 73.194（12）, β= 72.351（9）, γ = 89.509（8）o, V = 911.2（2） A^3, Z = 2, T = 300.79（10） K, μ（Cu Kα） = 3.578 mm^-1, Dc = 1.626 g/cm3, F（000） = 448.0, GOF = 1.060, 5723 reflections measured（8.232≤2θ≤139.592°）, 3339 unique（Rint = 0.0184, Rsigma = 0.0254） which were used in all calculations. The final R = 0.0517（I 〉 2s（I）） and wR = 0.1494（all data）. Hydrogen bonds and π-π interactions together stabilize the structure of the molecule. The preliminary biological test shows that the title compound has good antitumor activity against A549 in vitro and lower toxicity to normal cells.

Effect of the Si/Al ratio of HZSM-5 zeolite on the production of dimethyl ether before and after ultrasonication

A series of as-synthesized HZSM-5 zeolites with different Si/Al ratios(25,90,120,240 and 400)were post-treated by ultrasonication for an optimum time of 60 min.The morphology,acidity and textural properties of HZSM-5 were characterized with XRD,SEM,N_2 adsorption and NH3-TPD techniques.The catalytic performance was evaluated by dehydration of methanol to dimethyl ether(DME),which is a promising gaseous automotive fuel in future.It was found that the Si/Al ratio of HZSM-5 had considerable impacts on its catalytic performance for dehydration of methanol to DME.Its activity increased with decreasing Si/Al ratio from 400 to 25.Ultrasonication of HZSM-5 could significantly improve its catalytic performance.

Simultaneous Determination of Ultraviolet Absorbers and Antibacterial Agents in Textiles by Ultra-High Performance Liquid Chromatography/Orbitrap High Resolution Mass Spectrometry

This paper reported a new analytical method for the simultaneous determination of seven benzotriazole ultraviolet absorbers and seven antibacterial agents in textiles. After ultrasonic extraction for the textile samples in methanol, the solutions were analyzed by ultra-high performance liquid chromotagraphy/orbitrap high resolution mass spectrometry (UPLC/Orbitrap HRMS). It showed that a good chromatographic separation for these target compounds was achieved by a Hypersil GOLD column (100 mm × 2.1 mm × 1.9 μm) with a gradient elution of methanol and 0.1% aqueous formic acid solution (containing 0.5 mmol/L ammonium acetate). Triclosan and 4-chloro-3,5-dimethyl phenol (PCMX) were detected by the orbitrap HRMS in an electrospray ionization (ESI) negative mode while the other twelve target compounds were detected by orbitrap HRMS in ESI positive mode. Full scan experiment was performed over the range from m/z 100 to m/z 500. These target compounds were routinely detected with mass accuracy below 2 × 10-6 (2 ppm) at the optimized conditions. The results showed that the limits of detection (LODs) were in the range from 0.1 to 0.3 μg/kg. The blank samples were spiked at three levels and their average recoveries varied from 80.5% to 96.3% while the relative standard deviation (RSD) changed from 3.2% to 9.9%. The present method was also applied for the determination of those ultraviolet absorbers and antibacterial agents in the commercial textiles.