An ERA5 tropospheric parameters-augmented approach for improving GNSS precise point positioning

Precise Point Positioning(PPP) technology has developed into a potent instrument for geodetic positioning, ionospheric modeling, tropospheric atmospheric parameter detection, and seismic monitoring.As atmospheric reanalysis data products’ accuracy and spatiotemporal resolution have improved recently, it has become important to apply these products to obtain high-accuracy tropospheric delay parameters, like zenith tropospheric delay(ZTD) and tropospheric horizontal gradient. These tropospheric delay parameters can be applied to PPP to reduce the convergence time and to increase the accuracy in the vertical direction of the position. The European Centre for Medium-Range Weather Forecasts Reanalysis 5(ERA5) atmospheric reanalysis data is the latest product with a high spatiotemporal resolution released by the European Center for Medium-Range Weather Forecasts(ECMWF). Only a few researches have evaluated the application of ERA5 data to Global Navigation Satellite System(GNSS)PPP. Therefore, this study compared and validated the ZTD products derived from ERA5 data using ZTD values provided by 290 global International GNSS Service(IGS) stations for 2016-2017. The results indicated a stable performance for ZTD, with annual average bias and RMS values of 0.23 cm and 1.09 cm,respectively. Further, GNSS observations for one week in each of the four seasons(spring: DOY 92-98;summer: DOY 199-205;autumn: DOY 275-281;and winter: DOY 22-28) from 34 multi-GNSS experiments(MGEX) stations distributed globally in 2016 were considered to evaluate the performance of ERA5-derived tropospheric delay products in GNSS PPP. The performance of ERA5-enhanced PPP was compared with that of the two standard GNSS PPP schemes(without estimated tropospheric horizontal gradient and with estimated tropospheric horizontal gradient). The results demonstrated that ERA5-enhanced GNSS PPP showed no significant improvement in the convergence times in both the Eastern(E) and Northern(N) directions, while the average convergence time over four weeks in the vertical(U)direction improved by 53.3% and 52.7%, respectively(in the case of pngm station). The average convergence times for each week in the U direction of the northern and southern hemisphere stations indicated a decrease of 16.3%, 12.6%, 9.6%, and 9.1%, and 16.9%, 9.6%, 8.9%, and 14.5%, respectively.Regarding positioning accuracy, ERA5-enhanced PPP showed an improvement of 13.3% and 16.2% over the two standard PPP schemes in the U direction, respectively. No significant improvement in the positioning performance was observed in both the E and N directions. Thus, this study demonstrated the potential application of the ERA5 tropospheric parameters-augmented approach to Beidou navigation and positioning.

Deformation caused by the 2011 eastern Japan great earthquake monitored using the GPS single-epoch precise point positioning technique

Crustal deformation can provide constraints for studying earthquake rupture and shock wave transmission for the Mw9.0 eastern Japan great earthquake. Using the single- epoch precise point positioning （PPP） method and the appropriate positioning flow, we process GPS data from six IGS （International GNSS Service） sites （e.g., MIZU, TSK2, USUD, MTKA, AIRA and KSMV） located in Japan and obtain the positioning results with centimeter scale precision. The displacement time series of the six sites are analyzed using the least squares spectral analysis method to estimate deformations caused by the Mw9.0 mainshock and the Mw7.9 aftershock, and the cumulative displacements after 1 day. Mainshock displacements at station MIZU, the nearest site to the mainshock in the North （N）, East （E）, and Up （U） directions, are -1.202 m, 2.180 m and -0.104 m, respectively, and the cumulative deformations after 1 day are -1.117 m, 2.071 m and -0.072 m, respectively. The displacements at station KSMV, the nearest site to the Mw7.9 aftershock in the N, E and U directions, are -0.032 m, 0.742 m and -0.345 m, respectively. The other sites obviously experienced eastern movements and subsidence. The deformation vectors indicate that the horizontal displacements caused by the earthquake point to the epicenter and rupture. Elastic bounds evidently took place at all sites. The results indicate that the crustal movements and earthquake were part of a megathrust caused by the Pacific Plate sinking under the North American Plate to the northeast of Japan island arc.

Modified algorithm of combined GPS/GLONASS precise point positioning for applications in open-pit mines

A modified algorithm of combined GPS/GLONASS precise point positioning （GG-PPP） was developed by decreasing the number of unknowns to be estimated so that accurate position solutions can be achieved in the case of less number of visible satellites. The system time difference between GPS and GLONASS （STDGG） and zenith tropospheric delay （ZTD） values were firstly estimated in an open sky condition using the traditional GG-PPP algorithm. Then, they were used as a priori known values in the modified algorithm instead of estimating them as unknowns. The proposed algorithm was tested using observations collected at BJFS station in a simulated open-pit mine environment. The results show that the position filter converges much faster to a stable value in all three coordinate components using the modified algorithm than using the traditional algorithm. The modified algorithm achieves higher positioning accuracy as well. The accuracy improvement in the horizontal direction and vertical direction reaches 69% and 95% at a satellite elevation mask angle of 50°, respectively.

Positioning performance analysis on combined GPS/BDS precise point positioning

Combining the observation data from five Multi-GNSS Experiment(MGEX)stations with the precise orbit and clock products from Global Positioning System(GPS)and BeiDou Navigation Satellite System(BDS),we studied the model of combined GPS/BDS precise point positioning,and then analyzed the convergence speed and short-time(6 h)positioning accuracy.The calculation results show that in static positioning,the average convergence time of GPS is about 50 min,and its horizontal accuracy is better than 2 cm while the vertical accuracy is better than 4 cm.The convergence speed of combined GPS/BDS is about 40 min,and its positioning accuracy is close to that of GPS.In kinematic positioning,the average convergence time of GPS is about 72 min,and its horizontal accuracy is better than 5 cm while the vertical accuracy is better than 12 cm.The average convergence time of GPS/BDS is about 57 min,and its horizontal accuracy is better than 3 cm while the vertical accuracy is better than 9 cm.Combined GPS/BDS has significantly improved the convergence speed,and its positioning accuracy is slightly than that of GPS.

Precise point positioning and its application in mining deformation monitoring

Precise point positioning (PPP)-based deformation monitoring scheme is presented for the use in mining deformation monitoring. Within the solutions of daily observation, outliers are detected and removed to avoid any potential misinterpretation of the results and then the deformation can be extracted by the coordinate differences between the two consecutive solutions. Meanwhile, because of the special location of a rover station in mining areas, the satellite geometry may be insufficient for a reasonable PPP solution, and the multipath impact an also be significant. Therefore, it is necessary to predict the satellite geometry before any daily observation. To evaluate the ability of extracting the deformation using the PPP-based method, various quality measures were introduced. The results of three datasets of the same station show that the precision of deformation monitored by PPP can reach up to cm level and even mm level.

Estimation of annual variation of water vapor in the Arctic Ocean between 80°–87°N using shipborne GPS data based on kinematic precise point positioning

The measurement of atmospheric water vapor （WV） content and variability is important for meteorological and climatological research. A technique for the remote sensing of atmospheric WV content using ground-based Global Positioning System （GPS） has become available, which can routinely achieve accuracies for integrated WV content of 1-2 kg/m2. Some experimental work has shown that the accuracy of WV measurements from a moving platform is comparable to that of （static） land-based receivers. Extending this technique into the marine environment on a moving platform would be greatly beneficial for many aspects of meteorological research, such as the calibration of satellite data, investigation of the air-sea interface, as well as forecasting and climatological studies. In this study, kinematic precise point positioning has been developed to investigate WV in the Arctic Ocean （80°-87°N） and annual variations are obtained for 2008 and 2012 that are identical to those related to the enhanced greenhouse effect.

Signal quality analysis and quality check of BDS3 Precise Point Positioning in the Arctic Ocean

This study analyzes the signal quality and the accuracy of BeiDou 3 rd generation Satellite Navigation System(BDS3) Precise Point Positioning(PPP) in the Arctic Ocean. Assessment of signal quality of BDS3 includes signal to noise ratio(SNR), multipath(MP), dilution of precision(DOP), and code-minus-carrier combination(CC). The results show that, 5 to 13 satellites are visible at any time in the Arctic Ocean area as of September 2018, which are sufficient for positioning. In the mid-latitude oceanic region and in the Arctic Ocean, the SNR is 25–52 dB Hz and the MP ranges from-2 m to 2 m. As the latitude increases, the DOP values show large variation, which may be related to the distribution of BDS satellites. The CC values of signals B1 I and BIC range from-5 m to 5 m in the mid-latitude sea area and the Arctic Ocean, which means the effect of pseudorange noise is small. Moreover, as to obtain the external precise reference value for GNSS positioning in the Arctic Ocean region is difficult, it is hard to evaluate the accuracy of positioning results. An improved isotropy-based protection level method based on Receiver Autonomous Integrity Monitoring is proposed in the paper, which adopts median filter to smooth the gross errors to assess the precision and reliability of PPP in the Arctic Ocean. At first, the improved algorithm is verified with the data from the International GNSS Service Station Tixi. Then the accuracy of BDS3 PPP in the Arctic Ocean is calculated based on the improved algorithm. Which shows that the kinematic accuracy of PPP can reach the decimeter level in both the horizontal and vertical directions, and it meets the precision requirements of maritime navigation.

Comparison of availability and reliability among different combined-GNSS/RNSS precise point positioning

With emergence of the BeiDou Navigation Satellite System(BDS), the Galileo Satellite Navigation System(Galileo), the Quasi-Zenith Satellite System(QZSS)and the restoration of the Global Navigation Satellite System(GLONASS), the single Global Positioning System(GPS) has been gradually expanded into multiple global and regional navigation satellite systems(multi-GNSS/RNSS). In view of differences in these 5 systems, a consolidated multi-GNSS/RNSS precise point positioning(PPP) observation model is deduced in this contribution. In addition, the performance evaluation of PPP for multi-GNSS/RNSS is conducted using a large number of the multi-GNSS experiment(MGEX) station datasets. Experimental results show that multi-GNSS/RNSS can guarantee plenty of visible satellites effectively. Compared with single-system GPS, PDOP, HDOP, and VDOP values of the multi-GNSS/RNSS are improved by 46.8%, 46.5% and 46.3%, respectively. As for convergence time, the static and kinematic PPP of multi-GNSS/RNSS are superior to that of the single-system GPS, whose reliability, availability, and stability drop sharply with the increasing elevation cutoff. At satellite elevation cutoff of 40 °, the single-system GPS fails to carry out continuous positioning because of the insufficient visible satellites, while the multi-GNSS/RNSS PPP can still get positioning solutions with relatively high accuracy, especially in the horizontal direction.

On ionosphere-delay processing methods for single-frequency precise-point positioning

In single-frequency precise-point positioning of a satellite,ionosphere delay is one of the most important factors impacting the accuracy. Because of the instability of the ionosphere and uncertainty of its physical properties, the positioning accuracy is seriously limited when using a precision-limited model for correction. In order to reduce the error, we propose to introduce some ionosphere parameter for real-time ionosphere-delay estimation by applying various mapping functions. Through calculation with data from the IGS（ International GPS Service） tracking station and comparison among results of using several different models and mapping functions, the feasibility and effectiveness of the new method are verified.

Impact of Tropospheric Delay Gradients on Total Tropospheric Delay and Precise Point Positioning

GPS signals are electromagnetic waves that are affected by the Earth’s atmosphere. The Earth’s atmosphere can be categorized, according to its effect on GPS signals, into the ionosphere (ionospheric delay) and neutral atmosphere (tropospheric delay). The first-order ionospheric delay can be eliminated by linear combination of GPS observables on different frequencies. However, tropospheric delay cannot be eliminated because it is frequency-independent. The total tropospheric delay can be divided into three components. The first is the dry component, the second part is the wet component, and the third part is the horizontal gradients which account for the azimuthal dependence of tropospheric delay. In this paper, the effect of modeling tropospheric gradients on the estimation of the total tropospheric delay and station position is investigated. Long session, one month during January 2015, of GPS data is collected from ten randomly selected globally distributed IGS stations. Two cases are studied: the first case, the coordinates of stations are kept fixed to their actual values and the tropospheric delay is estimated twice, with and without tropospheric gradients. In the second case, the station position is estimated along with the total tropospheric delay with and without tropospheric gradients. It is shown that the average bias of the estimated total tropospheric delay when neglecting tropospheric gradients ranges from ?1.72 mm to 2.14 mm while the average bias when estimating gradients are ?0.898 mm to 1.92 mm which means that the bias is reduced by about 30%. In addition, the average standard deviation of the bias is 4.26 mm compared with 4.52 mm which means that the standard deviation is improved by about 6%.

Endemic error correction model and quantitative analysis of precise point positioning

To identify the endemic error of the precise point positioning which cannot be weakened or eliminated in precise point positioning (PPP) zero-difference model, the 24 h observation data acquired from CHAN station on Oct 31st, 2010, were adopted for analyses, different correction models of various errors were discussed and their influences on traditional zero-difference model were analyzed. The results show that the errors cannot be ignored. They must be corrected with suitable models and estimated with auxiliary parameters. The influence magnitudes of all errors are defined, and the results have guiding significance to improve the accuracy of precise point positioning zero-difference model.

Application of precise point positioning technology in airborne gravity measurement

The precise point positioning （PPP） technology is applied to an airborne gravity survey. By analyzing the advantages and disadvantages of several velocity and acceleration measurement methods and in combination with an actual marine gravity survey, the position difference method is confirmed to be a useful survey method for velocity and acceleration. Finally, the practicability of using PPP in airborne marine gravity survey is verified by measured data.

Performance analysis of real-time and post-mission kinematic precise point positioning in marine environments

This article focuses on the performance analysis of both real-time and post-mission kinematic precise point positioning(PPP)in challenging marine environments.For this purpose,a real dynamic experiment lasting 6 h was carried out on a lake dam in?orum City of Turkey.While the kinematic test was continuing,the real-time PPP coordinates were obtained for each measurement epoch with a commercial real-time PPP(RT-PPP)service,namely the Trimble Center Point RTX.Then the post-mission PPP(PM-PPP)coordinates were calculated by using Multi-GNSS data and the Multi-GNSS Experiment(MGEX)precise products.The kinematic RT-PPP and PM-PPP results showed that the PPP coordinates were consistent with the relative solution at centimetre and decimetre level in horizontal and height components,respectively.This study implies that PPP technique is a powerful tool for highly accurate positioning in both real-time and post-mission modes,even for dynamic applications in harsh environments.

Modeling and Prediction of Inter-System Bias for GPS/BDS-2/BDS-3 Combined Precision Point Positioning

The combination of Precision Point Positioning(PPP)with Multi-Global Navigation Satellite System(MultiGNSS),called MGPPP,can improve the positioning precision and shorten the convergence time more effectively than the combination of PPP with only the BeiDou Navigation Satellite System(BDS).However,the Inter-System Bias(ISB)measurement of Multi-GNSS,including the time system offset,the coordinate system difference,and the inter-system hardware delay bias,must be considered for Multi-GNSS data fusion processing.The detected ISB can be well modeled and predicted by using a quadratic model(QM),an autoregressive integrated moving average model(ARIMA),as well as the sliding window strategy(SW).In this study,the experimental results indicate that there is no apparent difference in the ISB between BDS-2 and BDS-3 observations if B1I/B3I signals are used.However,an obvious difference in ISB can be found between BDS-2 and BDS-3 observations if B1I/B3I and B1C/B2a signals are used.Meanwhile,the precision of the Predicted ISB(PISB)on the next day of all stations is about 0.1−0.6 ns.Besides,to effectively utilize the PISB,a new strategy for predicting the PISB for MGPPP is proposed.In the proposed strategy,the PISB is used by adding two virtual observation equations,and an adaptive factor is adopted to balance the contribution of the Observed ISB(OISB)and the PISB to the final estimations of ISB.To validate the effectiveness of the proposed method,some experimental schemes are designed and tested under different satellite availability conditions.The results indicate that in open sky environment,the selective utilization of the PISB achieves almost the same positioning precision of MGPPP as the direct utilization of the PISB,but the convergence time of MGPPP is reduced by 7.1%at most in the north(N),east(E),and up(U)components.In the blocked sky environment,the selective utilization of the PISB contributes to more significant improvement of the positioning precision and convergence time than that in the open sky environment.Compared with the direct utilization of the PISB,the selective utilization of the PISB improves the positioning precision and convergence time by 6.7%and 12.7%at most in the N,E,and U components,respectively.

GNSS rapid precise point positioning enhanced by low Earth orbit satellites

The Low Earth Orbit(LEO)satellites can be used to efectively speed up Precise Point Positioning(PPP)convergence.In this study,180 LEO satellites with a global distribution are simulated to evaluate their contribution to the PPP convergence.LEO satellites can give more redundant observations and improve satellite geometric distributions,particularly for a single Global Navigation Satellite System(GNSS).The convergence speed of the PPP foat solution using the Global Positioning System(GPS,G)or BeiDou Navigation Satellite System(BDS,C)single system as well as the G/C/Galileo navigation satellite system(Galileo,E)/GLObal NAvigation Satellite System(GLONASS,R)combined system with LEO satellites added is improved by 90.0%,91.0%,and 90.7%,respectively,with respect to the system without LEO satellites added.We introduced LEO observations to assist GNSS in PPP-AR(Ambiguity Resolution)and PPP-RTK(Real Time Kinematic).The success fx rate of a single system is signifcantly improved,and the Time-To-First-Fix(TTFF)of G and G/C/E is reduced by 86.4%and 82.8%,respectively,for the PPP-AR solution.We analyzed the positioning performance of LEO satellite assisted G/C/E PPP-RTK in the reference networks of diferent scales,namely diferent atmospheric delay interpolation accuracies.The success fx rate of the G/C/E combined system is improved from 86.8 to 94.9%,and the TTFF is reduced by 36.8%,with the addition of LEO satellites in the 57 km reference network.In the 110 km reference network,the success fx rate of the G/C/E combined system is improved from 64.0 to 88.6%,and the TTFF is reduced by 32.1%.GNSS PPP-RTK with adding the LEO satellites in the reference networks of diferent scales shows obvious improvement because the atmospheric correlation decreases with increasing distance from the reference networks.

Quality monitoring of real-time GNSS precise positioning service system

The Real-Time Global Navigation Satellite System(GNSS)Precise Positioning Service(RTPPS)is recognized as the most promising system by providing precise satellite orbit and clock correc-tions for users to achieve centimeter-level positioning with a stand-alone receiver in real-time.Although the products are available with high accuracy almost all the time,they may occasionally suffer from unexpected significant biases,which consequently degrades the positioning perfor-mance.Therefore,quality monitoring at the system-level has become more and more crucial for providing a reliable GNSS service.In this paper,we propose a method for the monitoring of realtime satellite orbit and clock products using a monitoring station network based on the Quality Control(QC)theory.The satellites with possible biases are first detected based on the outliers identified by Precise Point Positioning(PPP)in the monitoring station network.Then,the corresponding orbit and clock parameters with temporal constraints are introduced and esti-mated through the sequential Least Square(LS)estimator and the corresponding Instantaneous User Range Errors(IUREs)can be determined.A quality indicator is calculated based on the IUREs in the monitoring network and compared with a pre-defined threshold.The quality monitoring method is experimentally evaluated by monitoring the real-time orbit and clock products generated by GeoForschungsZentrum(GFZ),Potsdam.The results confirm that the problematic satellites can be detected accurately and effectively with missed detection rate 4×10^(-6) and false alarm rate 1:2×10^(-5).Considering the quality alarms,the PPP results in terms of RMS of positioning differences with respect to the International GNSS Service(IGS)weekly solution in the north,east and up directions can be improved by 12%,10%and 27%,respectively.

基于城市CORS的快速单点定位增强服务与应用

智慧城市建设中CORS位置服务的海量、隐私及高可靠性成为重要发展趋势。本文介绍了基于PPP-RTK技术体系的城市CORS增强定位服务,推导了城市CORS增强精密单点定位的公式,给出了城市CORS增强定位参数的可估形式及其在用户端的适用方法。结合广州CORS实时数据,验证了PPP-RTK服务的有效性。试验表明PPP-RTK用户端平面首历元即可收敛到厘米级,高程7个历元左右可收敛到厘米级,并且PPP-RTK增强定位参数SSR2OSR与短基线RTK性能大体相当,可支撑海量用户的监测需求。车载试验全程保持优于0.5 m车道级的三维精度,表明PPP-RTK定位能够满足多元化高可靠性定位。

非组合精密单点定位模型参数估计

为了进一步发挥非组合精密单点定位具有的数据利用率高、未放大观测噪声和可估计电离层延迟等优势,提出一种可估计电离层延迟和接收机差分码偏差(DCB)的改进非组合精密单点定位模型:与传统非组合精密单点定位模型估计的接收机钟差参数和DCB进行组合计算,估计出接收机钟差与参与计算的第一频点和第二频点的硬件延迟;利用北京某监测站采集的北斗三号全球卫星导航系统(BDS-3)观测数据,对B1I+B3I、B1C+B2a等2种频点组合分别进行2种非组合精密单点定位计算,估计电离层延迟、接收机钟差、第一频点和第二频点的硬件延迟。结果表明:传统非组合精密单点定位模型定位精度和收敛时间略优于改进的非组合精密单点定位模型;改进非组合精密单点定位模型估计的电离层延迟的平均修正百分比为85.54%,比传统非组合精密单点定位模型估计的电离层延迟高6.43%;B1I+B3I和与B1C+B2a频点组合估计的接收机钟差的RMS分别为0.19和0.21 ns,均值相差0.09 ns,钟差估计精度相当;接收机B1I、B3I、B1C和B2a硬件延迟与标定值都在0.14 ns以内。

Extraction of line-of-sight ionospheric observables from GPS data using precise point positioning

Here we propose a method for extracting line-of-sight ionospheric observables from GPS data using precise point positioning(PPP).The PPP-derived ionospheric observables(PIOs) have identical form with their counterparts obtained from leveling the geometry-free GPS carrier-phase to code(leveling ionospheric observables,LIOs),and are affected by the satellite and receiver inter-frequency biases(IFBs).Based on the co-location experiments,the effects of extracting error arising from the observational noise and multipath on the PIOs and the LIOs are comparatively assessed,and the considerably reduced effects ranging from 70% to 75% on the PIOs with respect to the LIOs can be verified in our case.In addition,based on 26 consecutive days' GPS observations from two international GNSS service(IGS) sites(COCO,DAEJ) during disturbed ionosphere period,the extracted PIOs and LIOs are respectively used as the input of single-layer ionospheric model to retrieve daily satellite IFBs station-by-station.The minor extracting errors underlying the PIOs in contrast to the LIOs can also be proven by reducing day-to-day scatter and improving between-receiver consistency in the retrieved satellite IFBs values.

LEO多星座增强BDS精密单点定位性能评估

针对不同构型的低轨星座(LEO)增强北斗卫星导航系统BDS的精密单点定位PPP性能开展研究。通过IGS高、中、低纬度6测站实测数据、精密轨道及钟差产品,生成BDS、“鸿雁”HY、“微厘空间”CS精密星历、卫星钟差、观测量等实验仿真数据,构建了LEO增强BDS PPP数学模型,实现了BDS、BDS+HY、BDS+CS、BDS+HY+CS不同组合PPP。实验结果表明,在10、60 min静态PPP定位精度以及平均可视卫星数、PDOP值等方面均有不同程度的提升,HY对高纬度KIRU站改善效果显著,收敛时间减至2 min以内,CS对低纬度FAA1站测站收敛时间的提升最大,从46 min 50 s缩短至2 min,HY+CS增强BDS的效果最好,10 min定位精度均能达到毫米级,除FAA1站外其他测站均收敛在1 min以内。