期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
拉伸温度对α'-型聚乳酸结构与性能的影响 被引量:5
1
作者 陈晓浪 徐阳 +3 位作者 孙志丹 张志斌 胡书春 Shaw Ling Hsu 《化学学报》 SCIE CAS CSCD 北大核心 2012年第6期775-782,共8页
α'-晶型聚乳酸(PLA)膜被制备和单轴拉伸.通过凝胶渗透色谱仪(GPC)、全反射红外光谱(ATR-IR)、差示扫描量热仪(DSC),X射线衍射(XRD)及Raman光谱等测试技术研究了拉伸温度梯度变化对α'-晶型PLA膜的分子量及其分布、分子链构象... α'-晶型聚乳酸(PLA)膜被制备和单轴拉伸.通过凝胶渗透色谱仪(GPC)、全反射红外光谱(ATR-IR)、差示扫描量热仪(DSC),X射线衍射(XRD)及Raman光谱等测试技术研究了拉伸温度梯度变化对α'-晶型PLA膜的分子量及其分布、分子链构象、结晶度、晶型转变和取向行为的影响.在恒定拉伸速度与应变下,拉伸温度对PLA膜的应力-应变曲线,特别是屈服强度、拉伸模量产生了较大的影响,其值随拉伸温度的增加而降低.GPC测试结果表明,在不同的温度下拉伸后,PLA会发生一定程度的降解,分子量降低;ATR-IR,XRD,DSC和Raman光谱测试结果表明,在不同的温度下拉伸后α'-型PLA没有发生晶型的转变,即没有由α'-晶体转变为α-或β-晶体.结果表明PLA的结晶度、分子链取向程度强烈依赖于拉伸温度:当拉伸温度低于100℃时,α'-型PLA膜的结晶度与沿着拉伸方向的变形程度随拉伸温度的增加而增加,分子链的高度取向诱导了PLA结晶;当拉伸温度超过100℃后,PLA的分子链沿着拉伸方向上的有序度与结晶度将降低. 展开更多
关键词 单轴拉伸 聚乳酸 结晶 取向
原文传递
Largely Improved Stretch Ductility and β-Form Room-temperature Durability of Poly(vinylidene fluoride) by Incorporating Aliphatic Polyketone 被引量:1
2
作者 Shui-Qin Pu Shuo Guo +1 位作者 Ke Wang Qiang Fu 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2018年第11期1277-1285,共9页
In this study, we attempt to prepare a new blending system of poly(vinylidene fluoride) (PVDF) and aliphatic polyketone (POK) by melt compounding, The latter is a promising engineering plastic with comprehensive... In this study, we attempt to prepare a new blending system of poly(vinylidene fluoride) (PVDF) and aliphatic polyketone (POK) by melt compounding, The latter is a promising engineering plastic with comprehensive mechanical performances. When POK acted as minor phase to homogeneously disperse in and intimately contact with PVDF matrix, the brittle tensile behavior of neat PVDF transferred into a remarkably flexible manner (the elongation at break increased for 20 times), and more interestingly, the room- temperature durability of β-form PVDF in the uniaxially drawn blend film was obviously better than that in the neat PVDF film. Fourier transform infrared spectroscopy revealed that specific dipole interaction existed between CF2 group of PVDF and C=O group of POK. The intermolecular dipolar interaction induced good compatibility in the PVDF/POK blends, as evidently proved by fine two-phase morphology and decreased melting points of POK crystals. Therefore, the good compatibility and interracial enhancement are responsible for the improvement of the stretch ductility and β-form room-temperature durability of the PVDF/POK blends. 展开更多
关键词 BLEND Aliphatic polyketone Dipole interaction Stretch ductility uniaxially drawn β-pvdf
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部