Building energy saving needs solar energy, but the promotion of solar energy has to be integrated with the constructions. Through analyzing the energy-saving significance of solar energy, and the status and features o...Building energy saving needs solar energy, but the promotion of solar energy has to be integrated with the constructions. Through analyzing the energy-saving significance of solar energy, and the status and features of it, this paper has discussed the solar energy and building integration technology and application in the residential building, and explored a new way and thinking for the close combination of the solar technology and residence.展开更多
Renewable energy options, including solar power, are becoming increasingly viable alternatives to conventional sources of energy, such as oil, coal and natural gas. Solar Photovoltaic (PV) technology is one type of ...Renewable energy options, including solar power, are becoming increasingly viable alternatives to conventional sources of energy, such as oil, coal and natural gas. Solar Photovoltaic (PV) technology is one type of solar energy technologies that has recently received substantial attention because it offers the possibility of providing clean power sources for buildings. The aim of this paper is to examine the economic viability of using solar PV within future residential buildings in the oil-rich Saudi Arabia. Strictly speaking, the prospects of using the PV in order to provide 10% of the electricity to be consumed in the houses, which are going to be built in Sandi Arabia over the period 2010-2025, are examined. The study reveals that significant economic and environmental benefits could be realized as a result of such an endeavor.展开更多
The day/night (diurnal) changes in temperature and solar radiation pose challenges for maintaining human thermal comfort in buildings. Passive and energy-conserving buildings seek to manage the available thermal ene...The day/night (diurnal) changes in temperature and solar radiation pose challenges for maintaining human thermal comfort in buildings. Passive and energy-conserving buildings seek to manage the available thermal energy by lowering peaks and dampening the fluctuations in order to maintain conditions for human comfort. Appropriate use of thermal mass moderates the internal temperatures by averaging diurnal extremes. Thermal mass is one of the powerful tools which architects and designers can use to control temperature. It can be used to optimize the performance of energy-conserving buildings that rely primarily on mechanical heating and cooling strategies. Massive building envelopes-such as masonry, concrete, earth, and insulating concrete forms (ICFs) can be utilized as one of the simplest ways of reducing building heating and cooling loads. This article analyses the role and effectiveness of thermal mass as a strategy for providing indoor thermal comfort for passive solar and energy conserving buildings.展开更多
Solar energy is the radiant light and heat from the Sun that has been harnessed by human since ancient times. Also secondary solar resources such as wind and wave power, hydroelectric power and biomass account for mos...Solar energy is the radiant light and heat from the Sun that has been harnessed by human since ancient times. Also secondary solar resources such as wind and wave power, hydroelectric power and biomass account for most of the available renewable energy on Earth, which can be used by human. Architects since alacient times have used various methods to hamesse and employ the solar energy for lighting, cooling and heating and etc. Meanwhile, Iran's ancient architecture, as an adaptive one, which consists of various climatic reigns, is filled with abounding examples of using sun energy in buildings. But, unfortunately despite these ancient methods, our modern architects mostly tend to provide energy of buildings with fossil fuels. This increases energy costs of the building's and also pollutes the environment. In this article it is intended to consider the ancient ways of using solar energy in Iran, and then suggest new methods for applying in modem buildings. The results of consideration show that among Solar technologies, passive and active methods, Iran's ancient architects have used passive methods, for example in mass and space, orientation and settlement of building. The idea of passive methods can be used in new shapes in current buildings, for instance by using solar space, central yard and etc. The suggestive method in this paper is combining the passive methods with the active ones.展开更多
The feasibility of Plus Energy Building for a sample relevant case is investigated.After a literature review aimed to identify key aspects of this type of buildings,a preliminary evaluation of the thermal performance ...The feasibility of Plus Energy Building for a sample relevant case is investigated.After a literature review aimed to identify key aspects of this type of buildings,a preliminary evaluation of the thermal performance of a building constructed using conventional material is presented together with a parametric analysis of the impact of typical influential parameters.Solar domestic hot water(SDHW)and photovoltaic systems(PV)are considered in the study.Numerical simulations indicate that for the examined sample case(Beirut in Lebanon)the total annual energy need of conventional building is 87.1 kWh/y.m^(2).About 49%of energy savings can be achieved by improving the building envelope and installing energy efficient technologies.Moreover,about 90%of energy savings in domestic hot water production can be achieved by installing a SDHW system composed of two solar collectors connected in series.Finally,the addition of a grid connected PV array system can significantly mitigate the energy needs of the building leading to an annual excess of energy.展开更多
On December 21,2020,The State Council Information Office issued a white paper titled"China's Energy Development in the New Era,"in which the installed capacity of hydropower,wind power,photovoltaic power...On December 21,2020,The State Council Information Office issued a white paper titled"China's Energy Development in the New Era,"in which the installed capacity of hydropower,wind power,photovoltaic power and biomass power generation in China ranked first in the world[1].Solar photovoltaic power generation is the most important development direction of clean energy in the world.It is an important energy strategy to combine it with the field of construction in China.This paper mainly introduces the characteristics and problems of the key technologies of solar photovoltaic building integration,and explores its future development direction and ways,in order to constantly promote the industrialization of new energy technology in China.展开更多
Two roof solar collectors (RSCs), conventional single pass RSC and new double pass RSC, were compared. The new roof solar collector, which is formed by integrating a double pass solar air collector with the roof of th...Two roof solar collectors (RSCs), conventional single pass RSC and new double pass RSC, were compared. The new roof solar collector, which is formed by integrating a double pass solar air collector with the roof of the building, can be operated more efficiently for space heating in winter, and for natural ventilation in other seasons. To evaluate the performances of the two RSCs for both space heating and natural ventilation, a single traditional Chinese style house, on which the two RSCs will be mounted, was developed. The efficiency of solar energy conversion for the new RSC is higher than that of the single pass one by 10% on average, and the ventilation rate contributed by natural ventilation for the new RSC can be improved to a great extent for most cases, indicating that the new RSC is superior to the single pass one from the viewpoint of both space heating and natural ventilation. The new RSC is more potential for improving indoor thermal environment and energy saving of buildings.展开更多
Conferences and publications on Smart Cities and self-styled ecological buildings such as“Vertical Forests”,“Biophilic”building complexes and other similar are multiplying.But then,in reality,we continue to design...Conferences and publications on Smart Cities and self-styled ecological buildings such as“Vertical Forests”,“Biophilic”building complexes and other similar are multiplying.But then,in reality,we continue to design as we have always done for the last ninety years:with the consolidated rules and formal solutions of international post-modern composition,in its various forms.The only attentions are(and not always)to super-insulate the envelopes,arrange photovoltaic panels on the roofs,make the systems smart and cover the facades and roofs with appropriate green washing.Even in the awareness that human settlements and cities are extremely complex phenomena,mostly determined by economic and social factors,rather than by conscious typological-settlement choices,perhaps the time has come to acknowledge that the traditional paradigms of design must be changed.First of all,the types of settlements must be renewed,because it is through their optimization that the greatest savings in terms of energy and sustainability can be achieved.The research presented here is the application of a ten-year study that involved the development of net Zero Energy Mass Custom Housing(ZEMCH)in specific context in southern Italy.The Innovation and Transparency of Tenders Environmental Compatibility(ITACA)Assessment Protocol,derived from the Green Building Challenge’s GBTool,was used as a design guide,which is normally used for the assessment and judgment of sustainability at the building scale and not of the urban design.The result is a settlement model in which network of pedestrian,cycle and public transport is fully integrated with adjacent urban areas;effective landscaping connects public and private green and kitchen-gardens/orchards everywhere;buildings are made with new semi-underground typologies;net ZEMCHs are made with local,recyclable materials with low impact or positive energy balance;wastewater and rainwater are collected,in-loco phyto-purified and reused;renewable energies(sun,earth,wind)satisfy remaining necessities,with a minimum of plant interventions.展开更多
Technology advancement has ensured a better means of livelihood essentially in certain parts of West Africa, specifically Nigeria, where the climate is predominantly hot in most parts throughout the year. Air-conditio...Technology advancement has ensured a better means of livelihood essentially in certain parts of West Africa, specifically Nigeria, where the climate is predominantly hot in most parts throughout the year. Air-conditioning has reduced the harshness of indoor discomforts to the barest minimum. It is no more uncommon to find it regularly in use in most homes and offices. Currently, the economy has the centrality of its power supply hinged on generator plants. The enigma of the current situation is how this alternative problem has catastrophic after effects on the environment. This and many more add up to the greatest of all the threats now evading our environment and the world -- Global warming. The threat of Global warming is real and the need to find less environmentally destructive sources of energy cannot be overemphasized. This paper is a contribution towards energy saving in buildings through the reduction of solar radiation incident on buildings. Sustainable Building calls for an integrated planning approach for operating buildings economically, substantially reducing their impact on the environment by reducing energy/power consumption, amongst others, and enhancing the well-being of their inhabitants. Only buildings that reconcile all of the above factors are fit for the future. A case study of the CMS (Catholic Mission School) Book Shop house in Lagos was carried out. The methodology involved the use of a solar chart and shadow angle protractor to determine the overheated periods represented by the shading masks and data collected. From this analysis, it was decided to accept the use of external sun shading and preliminary designs and specifications were prepared by the architects. The use of external solar screens made a saving of up to 75% of the energy input which would otherwise have been required by air-conditioning.展开更多
Buildings are becoming smarter as a result of a variety of advanced technologies that enable energy management, optimal space utilization, and smart surveillance for safety, among other things. Energy-efficient smart ...Buildings are becoming smarter as a result of a variety of advanced technologies that enable energy management, optimal space utilization, and smart surveillance for safety, among other things. Energy-efficient smart building ideas and execution are of great interest and top priority due to the building’s occupants’ misused and high-power consumption. This paper addresses the design and execution of an energy management system that includes a solar power system for generating power for the building’s needs and a PIR-based automation system for efficient power use. This project was carried out at the Military Technological College (MTC) in Muscat, in the system engineering department’s offices. This project seeks to generate power for the building’s energy needs using solar photovoltaic panels and reduce energy consumption within the office using a PIR-based automation system. The results demonstrate that after the breakeven point (the time it takes to recoup the initial investment), it can provide power to the building for another 17 years. The calculations and practical results presented in this study approve that the system is extremely helpful.展开更多
The concept of utilizing microgrids(MGs)to convert buildings into prosumers is gaining massive popularity because of its economic and environmental benefits.These pro-sumer buildings consist of renewable energy source...The concept of utilizing microgrids(MGs)to convert buildings into prosumers is gaining massive popularity because of its economic and environmental benefits.These pro-sumer buildings consist of renewable energy sources and usually install battery energy storage systems(BESSs)to deal with the uncertain nature of renewable energy sources.However,because of the high capital investment of BESS and the limitation of available energy,there is a need for an effective energy management strategy for prosumer buildings that maximizes the profit of building owner and increases the operating life span of BESS.In this regard,this paper proposes an improved energy management strategy(IEMS)for the prosumer building to minimize the operating cost of MG and degradation factor of BESS.Moreover,to estimate the practical operating life span of BESS,this paper utilizes a non-linear battery degradation model.In addition,a flexible load shifting(FLS)scheme is also developed and integrated into the proposed strategy to further improve its performance.The proposed strategy is tested for the real-time annual data of a grid-tied solar photovoltaic(PV)and BESS-powered AC-DC hybrid MG installed at a commercial building.Moreover,the scenario reduction technique is used to handle the uncertainty associated with generation and load demand.To validate the performance of the proposed strategy,the results of IEMS are compared with the well-established energy management strategies.The simulation results verify that the proposed strategy substantially increases the profit of the building owner and operating life span of BESS.Moreover,FLS enhances the performance of IEMS by further improving the financial profit of MG owner and the life span of BESS,thus making the operation of prosumer building more economical and efficient.展开更多
Accurate basic data are necessary to support performance-based design for achieving carbon peak and carbon neutral targets in the building sector.Meteorological parameters are the prerequisites of building thermal eng...Accurate basic data are necessary to support performance-based design for achieving carbon peak and carbon neutral targets in the building sector.Meteorological parameters are the prerequisites of building thermal engineering design,heating ventilation and air conditioning design,and energy consumption simulations.Focusing on the key issues such as low spatial coverage and the lack of daily or higher time resolution data,daily and hourly models of the surface meteorological data and solar radiation were established and evaluated.Surface meteorological data and solar radiation data were generated for 1019 cities and towns in China from 1988 to 2017.The data were carefully compared,and the accuracy was proved to be high.All the meteorological parameters can be assessed in the building sector via a sharing platform.Then,country-level meteorological parameters were developed for energy-efficient building assessment in China,based on actual meteorological data in the present study.This set of meteorological parameters may facilitate engineering applications as well as allowing the updating and expansion of relevant building energy efficiency standards.The study was supported by the National Science and Technology Major Project of China during the 13th Five-Year Plan Period,named Fundamental parameters on building energy efficiency in China,comprising of 15 top-ranking universities and institutions in China.展开更多
Building fresh air supply needs to meet certain regulations and fit people’s ever-growing indoor air quality de-mand.However,fresh air handling requires huge energy consumption that goes against the goal of net-zero ...Building fresh air supply needs to meet certain regulations and fit people’s ever-growing indoor air quality de-mand.However,fresh air handling requires huge energy consumption that goes against the goal of net-zero energy buildings.Thus,in this work,an adaptive fresh air pre-handling system is designed to reduce the cool-ing and heating loads of HVAC system.The sky-facing surface of the system uses electrochromic mechanism to manipulate the optical properties and thus make full use of solar energy(solar heating)and deep space cold source(radiative cooling)by switching between heating and cooling modes.In the cooling mode,the sky-facing surface shows a transmittance of down to zero,while the reflectance is high at 0.89 on average.In the heating mode,the electrochromic glass is highly transparent,allowing the sunlight to reach the solar heat absorber.To obtain the energy-saving potential under different climates,six cities were selected from various climate regions in China.Results show that the adaptive fresh air pre-handling system can be effective in up to 55.4%time of a year.The maximum energy-saving ratios for medium office,warehouse,and single-family house can reach up to 11.52%,26.62%,and 18.29%,respectively.In addition,the system shows multi-climate adaptability and broad application scenarios,making it a potential solution to building energy saving.展开更多
Jordan is a country with highly fossil fuel deficiency and thus other energy sources are needed to be explored. Solar energy in Jordan is highly recognized as a good source of energy and an excellent substitute to the...Jordan is a country with highly fossil fuel deficiency and thus other energy sources are needed to be explored. Solar energy in Jordan is highly recognized as a good source of energy and an excellent substitute to the fossil fuel. The solar energy in this article is obtained via data bases and modeling techniques for the specified place coordinate and angle of inclination. The angles of sun irradiations are different throughout the year;therefore solar energy needs to be magnified by optimizing the angle of inclination of solar cells. In this research, the optimized angles throughout the year are obtained to be in the range: 10°-60°. Solar energy can serve the residential building, the findings of this research show that every 1 m2 of the solar cell may contribute to about 60%-70% of customer needs of electricity throughout the year. The application of solar energy concept in the design of building will play an important role in energy sustainability.展开更多
The presence or absence of occupants in a building has a direct effect on its energy use,as it influences the operation of various building energy systems.Buildings with high occupancy variability,such as universities...The presence or absence of occupants in a building has a direct effect on its energy use,as it influences the operation of various building energy systems.Buildings with high occupancy variability,such as universities,where fluctuations occur throughout the day and across the year,can pose challenges in developing control strategies that aim to balance comfort and energy efficiency.This situation becomes even more complex when such buildings are integrated with renewable energy technologies,due to the inherently intermittent nature of these energy source.To promote widespread integration of renewable energy sources in such buildings,the adoption of advanced control strategies such as model predictive control(MPC)is imperative.However,the variable nature of occupancy patterns must be considered in its design.In response to this,the present study evaluates a price responsive MPC strategy for a solar thermal heating system integrated with thermal energy storage(TES)for buildings with high occupancy variability.The coupled system supplies the building heating through a low temperature underfloor heating system.A case study University building in Nottingham,UK was employed for evaluating the feasibility of the proposed heating system controlled by MPC strategy.The MPC controller aims to optimize the solar heating system’s operation by dynamically adjusting to forecasted weather,occupancy,and solar availability,balancing indoor comfort with energy efficiency.By effectively integrating with thermal energy storage,it maximizes solar energy utilization,reducing reliance on non-renewable sources and ultimately lowering energy costs.The developed model has undergone verification and validation process,utilizing both numerical simulations and experimental data.The result shows that the solar hot water system provided 63%heating energy in total for the case study classroom and saved more than half of the electricity cost compared with that of the original building heating system.The electricity cost saving has been confirmed resulting from the energy shifting from high price periods to medium to low price periods through both active and passive heating energy storages.展开更多
The feasibility of employing stand-alone solar energy systems to meet demand-side loads depends strongly on providing appropriate solar energy storage. The present paper presents an efficient and economical, undergrou...The feasibility of employing stand-alone solar energy systems to meet demand-side loads depends strongly on providing appropriate solar energy storage. The present paper presents an efficient and economical, underground, thermal storage design to store hot water at a temperature of around 180?C required for running a double effect absorption chiller to cool a zero-energy-house in a desert environment. The performance of the design is evaluated employing a specially developed efficient mathematical model, for simulating the steady state radiation, convection and conduction processes occurring within the storage unit. The model is presented and analyzed, and employed to investigate the effects of various design parameters on storage efficiency. It is demonstrated that high storage efficiency may be reached, providing that appropriate insulation materials are used. It is also revealed that the soil conductivity has little effect on storage efficiency.展开更多
A typical office building model with conventional use and contemporary building systems was developed for fa?ade optimization in continental climate. Wall, glazing area and window parameters were taken as the main var...A typical office building model with conventional use and contemporary building systems was developed for fa?ade optimization in continental climate. Wall, glazing area and window parameters were taken as the main variables. The objective function of optimization task described in this article is the minimization of cooling and heating energy con-sumption. The office building fa?ades optimization was carried out using a combination of IDA Indoor Climate and Energy 4.5 and GenOpt. The process is described in detail so that the approach may be emulated. A hybrid multidimen-sional optimization algorithm GPSPSOCCHJ was used in calculation process. The optimization results are presented in four quick selection charts to assist architects, designers and real estate developers make suitable early stage fa?ade selection decisions.展开更多
In this project, different combinations of solar energy and heat pump systems for preparation of DHW (domestic hot water) and space heating of buildings are analyzed through dynamic system simulations in TRNSYS (Tr...In this project, different combinations of solar energy and heat pump systems for preparation of DHW (domestic hot water) and space heating of buildings are analyzed through dynamic system simulations in TRNSYS (Transient System Simulation Program). In such systems, solar thermal energy can be used, on one hand, directly to charge the buffer storage and, on the other hand, as heat source for the evaporator oftbe HP (heat pump). In this work systems, in which solar heat is only used directly (parallel operation of solar and HP), systems using the collectors also as a heat source for the HP are analyzed and compared to conventional air HP systems. With a combined parallel solar thermal HP system, the system performance compared to a conventional HP system can be significantly increased. Unglazed selectively coated collectors as source for the HP have the advantage that the collector can be used as an air heat exchanger. If solar radiation is available and the collector is used as source for the HP, higher temperatures at the evaporator of the HP can be achieved than with a conventional air HP system.展开更多
The performance of a solar lighting and heating system(SLHS)based on the spectral splitting effect of nanofluids is presented in this paper.SLHS through nanofluids would split the sunlight spectrum into different wave...The performance of a solar lighting and heating system(SLHS)based on the spectral splitting effect of nanofluids is presented in this paper.SLHS through nanofluids would split the sunlight spectrum into different wavelength,and then introduce the visible light into the offices for lighting and absorb infrared energy to generate hot water.The Energy Plus software was used to analyze the energy consumption of typical office building located in the city of Harbin in China coupled with SLHS.Based on the simulation results two lighting zones were identified in the offices and the optimal lighting control strategy was developed for a full year.The performance models of SLHS with different light-receiving areas of 10 m^(2)and 40 m^(2)were simulated and validated using the existing experimental data.The overall energy-saving of the offices over a full year were analyzed using the validated model.Results demonstrated that for SLHS with the area of 40 m^(2),the rate of the energy saving in the offices due to lighting and hot water systems were 58.9%,and 19.3%,respectively.The system also had the additional benefit of reducing the cooling load of the air conditioning system during summer period together with improving the quality of the indoor environment resulting in better health and productivity of the occupants.展开更多
文摘Building energy saving needs solar energy, but the promotion of solar energy has to be integrated with the constructions. Through analyzing the energy-saving significance of solar energy, and the status and features of it, this paper has discussed the solar energy and building integration technology and application in the residential building, and explored a new way and thinking for the close combination of the solar technology and residence.
文摘Renewable energy options, including solar power, are becoming increasingly viable alternatives to conventional sources of energy, such as oil, coal and natural gas. Solar Photovoltaic (PV) technology is one type of solar energy technologies that has recently received substantial attention because it offers the possibility of providing clean power sources for buildings. The aim of this paper is to examine the economic viability of using solar PV within future residential buildings in the oil-rich Saudi Arabia. Strictly speaking, the prospects of using the PV in order to provide 10% of the electricity to be consumed in the houses, which are going to be built in Sandi Arabia over the period 2010-2025, are examined. The study reveals that significant economic and environmental benefits could be realized as a result of such an endeavor.
文摘The day/night (diurnal) changes in temperature and solar radiation pose challenges for maintaining human thermal comfort in buildings. Passive and energy-conserving buildings seek to manage the available thermal energy by lowering peaks and dampening the fluctuations in order to maintain conditions for human comfort. Appropriate use of thermal mass moderates the internal temperatures by averaging diurnal extremes. Thermal mass is one of the powerful tools which architects and designers can use to control temperature. It can be used to optimize the performance of energy-conserving buildings that rely primarily on mechanical heating and cooling strategies. Massive building envelopes-such as masonry, concrete, earth, and insulating concrete forms (ICFs) can be utilized as one of the simplest ways of reducing building heating and cooling loads. This article analyses the role and effectiveness of thermal mass as a strategy for providing indoor thermal comfort for passive solar and energy conserving buildings.
文摘Solar energy is the radiant light and heat from the Sun that has been harnessed by human since ancient times. Also secondary solar resources such as wind and wave power, hydroelectric power and biomass account for most of the available renewable energy on Earth, which can be used by human. Architects since alacient times have used various methods to hamesse and employ the solar energy for lighting, cooling and heating and etc. Meanwhile, Iran's ancient architecture, as an adaptive one, which consists of various climatic reigns, is filled with abounding examples of using sun energy in buildings. But, unfortunately despite these ancient methods, our modern architects mostly tend to provide energy of buildings with fossil fuels. This increases energy costs of the building's and also pollutes the environment. In this article it is intended to consider the ancient ways of using solar energy in Iran, and then suggest new methods for applying in modem buildings. The results of consideration show that among Solar technologies, passive and active methods, Iran's ancient architects have used passive methods, for example in mass and space, orientation and settlement of building. The idea of passive methods can be used in new shapes in current buildings, for instance by using solar space, central yard and etc. The suggestive method in this paper is combining the passive methods with the active ones.
文摘The feasibility of Plus Energy Building for a sample relevant case is investigated.After a literature review aimed to identify key aspects of this type of buildings,a preliminary evaluation of the thermal performance of a building constructed using conventional material is presented together with a parametric analysis of the impact of typical influential parameters.Solar domestic hot water(SDHW)and photovoltaic systems(PV)are considered in the study.Numerical simulations indicate that for the examined sample case(Beirut in Lebanon)the total annual energy need of conventional building is 87.1 kWh/y.m^(2).About 49%of energy savings can be achieved by improving the building envelope and installing energy efficient technologies.Moreover,about 90%of energy savings in domestic hot water production can be achieved by installing a SDHW system composed of two solar collectors connected in series.Finally,the addition of a grid connected PV array system can significantly mitigate the energy needs of the building leading to an annual excess of energy.
基金University-level Scientific Research Project of East University of Heilongjiang(Project No.HDFKY210106)。
文摘On December 21,2020,The State Council Information Office issued a white paper titled"China's Energy Development in the New Era,"in which the installed capacity of hydropower,wind power,photovoltaic power and biomass power generation in China ranked first in the world[1].Solar photovoltaic power generation is the most important development direction of clean energy in the world.It is an important energy strategy to combine it with the field of construction in China.This paper mainly introduces the characteristics and problems of the key technologies of solar photovoltaic building integration,and explores its future development direction and ways,in order to constantly promote the industrialization of new energy technology in China.
基金Shanghai Com mission of Science andTechnology( No.0 3 DZ12 0 12 )
文摘Two roof solar collectors (RSCs), conventional single pass RSC and new double pass RSC, were compared. The new roof solar collector, which is formed by integrating a double pass solar air collector with the roof of the building, can be operated more efficiently for space heating in winter, and for natural ventilation in other seasons. To evaluate the performances of the two RSCs for both space heating and natural ventilation, a single traditional Chinese style house, on which the two RSCs will be mounted, was developed. The efficiency of solar energy conversion for the new RSC is higher than that of the single pass one by 10% on average, and the ventilation rate contributed by natural ventilation for the new RSC can be improved to a great extent for most cases, indicating that the new RSC is superior to the single pass one from the viewpoint of both space heating and natural ventilation. The new RSC is more potential for improving indoor thermal environment and energy saving of buildings.
文摘Conferences and publications on Smart Cities and self-styled ecological buildings such as“Vertical Forests”,“Biophilic”building complexes and other similar are multiplying.But then,in reality,we continue to design as we have always done for the last ninety years:with the consolidated rules and formal solutions of international post-modern composition,in its various forms.The only attentions are(and not always)to super-insulate the envelopes,arrange photovoltaic panels on the roofs,make the systems smart and cover the facades and roofs with appropriate green washing.Even in the awareness that human settlements and cities are extremely complex phenomena,mostly determined by economic and social factors,rather than by conscious typological-settlement choices,perhaps the time has come to acknowledge that the traditional paradigms of design must be changed.First of all,the types of settlements must be renewed,because it is through their optimization that the greatest savings in terms of energy and sustainability can be achieved.The research presented here is the application of a ten-year study that involved the development of net Zero Energy Mass Custom Housing(ZEMCH)in specific context in southern Italy.The Innovation and Transparency of Tenders Environmental Compatibility(ITACA)Assessment Protocol,derived from the Green Building Challenge’s GBTool,was used as a design guide,which is normally used for the assessment and judgment of sustainability at the building scale and not of the urban design.The result is a settlement model in which network of pedestrian,cycle and public transport is fully integrated with adjacent urban areas;effective landscaping connects public and private green and kitchen-gardens/orchards everywhere;buildings are made with new semi-underground typologies;net ZEMCHs are made with local,recyclable materials with low impact or positive energy balance;wastewater and rainwater are collected,in-loco phyto-purified and reused;renewable energies(sun,earth,wind)satisfy remaining necessities,with a minimum of plant interventions.
文摘Technology advancement has ensured a better means of livelihood essentially in certain parts of West Africa, specifically Nigeria, where the climate is predominantly hot in most parts throughout the year. Air-conditioning has reduced the harshness of indoor discomforts to the barest minimum. It is no more uncommon to find it regularly in use in most homes and offices. Currently, the economy has the centrality of its power supply hinged on generator plants. The enigma of the current situation is how this alternative problem has catastrophic after effects on the environment. This and many more add up to the greatest of all the threats now evading our environment and the world -- Global warming. The threat of Global warming is real and the need to find less environmentally destructive sources of energy cannot be overemphasized. This paper is a contribution towards energy saving in buildings through the reduction of solar radiation incident on buildings. Sustainable Building calls for an integrated planning approach for operating buildings economically, substantially reducing their impact on the environment by reducing energy/power consumption, amongst others, and enhancing the well-being of their inhabitants. Only buildings that reconcile all of the above factors are fit for the future. A case study of the CMS (Catholic Mission School) Book Shop house in Lagos was carried out. The methodology involved the use of a solar chart and shadow angle protractor to determine the overheated periods represented by the shading masks and data collected. From this analysis, it was decided to accept the use of external sun shading and preliminary designs and specifications were prepared by the architects. The use of external solar screens made a saving of up to 75% of the energy input which would otherwise have been required by air-conditioning.
文摘Buildings are becoming smarter as a result of a variety of advanced technologies that enable energy management, optimal space utilization, and smart surveillance for safety, among other things. Energy-efficient smart building ideas and execution are of great interest and top priority due to the building’s occupants’ misused and high-power consumption. This paper addresses the design and execution of an energy management system that includes a solar power system for generating power for the building’s needs and a PIR-based automation system for efficient power use. This project was carried out at the Military Technological College (MTC) in Muscat, in the system engineering department’s offices. This project seeks to generate power for the building’s energy needs using solar photovoltaic panels and reduce energy consumption within the office using a PIR-based automation system. The results demonstrate that after the breakeven point (the time it takes to recoup the initial investment), it can provide power to the building for another 17 years. The calculations and practical results presented in this study approve that the system is extremely helpful.
基金supported in part by the Department of Science and Technology,Government of India,New Delhi,India“Internet of Things(IoT)Research of Interdisciplinary Cyber-Physical Systems Program”(No.DST/ICPS/CLUSTER/IoT/2018/General)。
文摘The concept of utilizing microgrids(MGs)to convert buildings into prosumers is gaining massive popularity because of its economic and environmental benefits.These pro-sumer buildings consist of renewable energy sources and usually install battery energy storage systems(BESSs)to deal with the uncertain nature of renewable energy sources.However,because of the high capital investment of BESS and the limitation of available energy,there is a need for an effective energy management strategy for prosumer buildings that maximizes the profit of building owner and increases the operating life span of BESS.In this regard,this paper proposes an improved energy management strategy(IEMS)for the prosumer building to minimize the operating cost of MG and degradation factor of BESS.Moreover,to estimate the practical operating life span of BESS,this paper utilizes a non-linear battery degradation model.In addition,a flexible load shifting(FLS)scheme is also developed and integrated into the proposed strategy to further improve its performance.The proposed strategy is tested for the real-time annual data of a grid-tied solar photovoltaic(PV)and BESS-powered AC-DC hybrid MG installed at a commercial building.Moreover,the scenario reduction technique is used to handle the uncertainty associated with generation and load demand.To validate the performance of the proposed strategy,the results of IEMS are compared with the well-established energy management strategies.The simulation results verify that the proposed strategy substantially increases the profit of the building owner and operating life span of BESS.Moreover,FLS enhances the performance of IEMS by further improving the financial profit of MG owner and the life span of BESS,thus making the operation of prosumer building more economical and efficient.
基金Project(2018YFC0704500)supported by the National Science and Technology Major Project of China during the 13th Five-Year Plan Period。
文摘Accurate basic data are necessary to support performance-based design for achieving carbon peak and carbon neutral targets in the building sector.Meteorological parameters are the prerequisites of building thermal engineering design,heating ventilation and air conditioning design,and energy consumption simulations.Focusing on the key issues such as low spatial coverage and the lack of daily or higher time resolution data,daily and hourly models of the surface meteorological data and solar radiation were established and evaluated.Surface meteorological data and solar radiation data were generated for 1019 cities and towns in China from 1988 to 2017.The data were carefully compared,and the accuracy was proved to be high.All the meteorological parameters can be assessed in the building sector via a sharing platform.Then,country-level meteorological parameters were developed for energy-efficient building assessment in China,based on actual meteorological data in the present study.This set of meteorological parameters may facilitate engineering applications as well as allowing the updating and expansion of relevant building energy efficiency standards.The study was supported by the National Science and Technology Major Project of China during the 13th Five-Year Plan Period,named Fundamental parameters on building energy efficiency in China,comprising of 15 top-ranking universities and institutions in China.
基金the support from National Natural Sci-ence Foundation of China(52276178)Natural Science Foundation of Jiangsu Province,China(BK20200373).
文摘Building fresh air supply needs to meet certain regulations and fit people’s ever-growing indoor air quality de-mand.However,fresh air handling requires huge energy consumption that goes against the goal of net-zero energy buildings.Thus,in this work,an adaptive fresh air pre-handling system is designed to reduce the cool-ing and heating loads of HVAC system.The sky-facing surface of the system uses electrochromic mechanism to manipulate the optical properties and thus make full use of solar energy(solar heating)and deep space cold source(radiative cooling)by switching between heating and cooling modes.In the cooling mode,the sky-facing surface shows a transmittance of down to zero,while the reflectance is high at 0.89 on average.In the heating mode,the electrochromic glass is highly transparent,allowing the sunlight to reach the solar heat absorber.To obtain the energy-saving potential under different climates,six cities were selected from various climate regions in China.Results show that the adaptive fresh air pre-handling system can be effective in up to 55.4%time of a year.The maximum energy-saving ratios for medium office,warehouse,and single-family house can reach up to 11.52%,26.62%,and 18.29%,respectively.In addition,the system shows multi-climate adaptability and broad application scenarios,making it a potential solution to building energy saving.
文摘Jordan is a country with highly fossil fuel deficiency and thus other energy sources are needed to be explored. Solar energy in Jordan is highly recognized as a good source of energy and an excellent substitute to the fossil fuel. The solar energy in this article is obtained via data bases and modeling techniques for the specified place coordinate and angle of inclination. The angles of sun irradiations are different throughout the year;therefore solar energy needs to be magnified by optimizing the angle of inclination of solar cells. In this research, the optimized angles throughout the year are obtained to be in the range: 10°-60°. Solar energy can serve the residential building, the findings of this research show that every 1 m2 of the solar cell may contribute to about 60%-70% of customer needs of electricity throughout the year. The application of solar energy concept in the design of building will play an important role in energy sustainability.
文摘The presence or absence of occupants in a building has a direct effect on its energy use,as it influences the operation of various building energy systems.Buildings with high occupancy variability,such as universities,where fluctuations occur throughout the day and across the year,can pose challenges in developing control strategies that aim to balance comfort and energy efficiency.This situation becomes even more complex when such buildings are integrated with renewable energy technologies,due to the inherently intermittent nature of these energy source.To promote widespread integration of renewable energy sources in such buildings,the adoption of advanced control strategies such as model predictive control(MPC)is imperative.However,the variable nature of occupancy patterns must be considered in its design.In response to this,the present study evaluates a price responsive MPC strategy for a solar thermal heating system integrated with thermal energy storage(TES)for buildings with high occupancy variability.The coupled system supplies the building heating through a low temperature underfloor heating system.A case study University building in Nottingham,UK was employed for evaluating the feasibility of the proposed heating system controlled by MPC strategy.The MPC controller aims to optimize the solar heating system’s operation by dynamically adjusting to forecasted weather,occupancy,and solar availability,balancing indoor comfort with energy efficiency.By effectively integrating with thermal energy storage,it maximizes solar energy utilization,reducing reliance on non-renewable sources and ultimately lowering energy costs.The developed model has undergone verification and validation process,utilizing both numerical simulations and experimental data.The result shows that the solar hot water system provided 63%heating energy in total for the case study classroom and saved more than half of the electricity cost compared with that of the original building heating system.The electricity cost saving has been confirmed resulting from the energy shifting from high price periods to medium to low price periods through both active and passive heating energy storages.
文摘The feasibility of employing stand-alone solar energy systems to meet demand-side loads depends strongly on providing appropriate solar energy storage. The present paper presents an efficient and economical, underground, thermal storage design to store hot water at a temperature of around 180?C required for running a double effect absorption chiller to cool a zero-energy-house in a desert environment. The performance of the design is evaluated employing a specially developed efficient mathematical model, for simulating the steady state radiation, convection and conduction processes occurring within the storage unit. The model is presented and analyzed, and employed to investigate the effects of various design parameters on storage efficiency. It is demonstrated that high storage efficiency may be reached, providing that appropriate insulation materials are used. It is also revealed that the soil conductivity has little effect on storage efficiency.
文摘A typical office building model with conventional use and contemporary building systems was developed for fa?ade optimization in continental climate. Wall, glazing area and window parameters were taken as the main variables. The objective function of optimization task described in this article is the minimization of cooling and heating energy con-sumption. The office building fa?ades optimization was carried out using a combination of IDA Indoor Climate and Energy 4.5 and GenOpt. The process is described in detail so that the approach may be emulated. A hybrid multidimen-sional optimization algorithm GPSPSOCCHJ was used in calculation process. The optimization results are presented in four quick selection charts to assist architects, designers and real estate developers make suitable early stage fa?ade selection decisions.
文摘In this project, different combinations of solar energy and heat pump systems for preparation of DHW (domestic hot water) and space heating of buildings are analyzed through dynamic system simulations in TRNSYS (Transient System Simulation Program). In such systems, solar thermal energy can be used, on one hand, directly to charge the buffer storage and, on the other hand, as heat source for the evaporator oftbe HP (heat pump). In this work systems, in which solar heat is only used directly (parallel operation of solar and HP), systems using the collectors also as a heat source for the HP are analyzed and compared to conventional air HP systems. With a combined parallel solar thermal HP system, the system performance compared to a conventional HP system can be significantly increased. Unglazed selectively coated collectors as source for the HP have the advantage that the collector can be used as an air heat exchanger. If solar radiation is available and the collector is used as source for the HP, higher temperatures at the evaporator of the HP can be achieved than with a conventional air HP system.
基金The authors gratefully acknowledge the funding support from the Natural Science Foundation of Heilongjiang Province(No.YQ2020E019).
文摘The performance of a solar lighting and heating system(SLHS)based on the spectral splitting effect of nanofluids is presented in this paper.SLHS through nanofluids would split the sunlight spectrum into different wavelength,and then introduce the visible light into the offices for lighting and absorb infrared energy to generate hot water.The Energy Plus software was used to analyze the energy consumption of typical office building located in the city of Harbin in China coupled with SLHS.Based on the simulation results two lighting zones were identified in the offices and the optimal lighting control strategy was developed for a full year.The performance models of SLHS with different light-receiving areas of 10 m^(2)and 40 m^(2)were simulated and validated using the existing experimental data.The overall energy-saving of the offices over a full year were analyzed using the validated model.Results demonstrated that for SLHS with the area of 40 m^(2),the rate of the energy saving in the offices due to lighting and hot water systems were 58.9%,and 19.3%,respectively.The system also had the additional benefit of reducing the cooling load of the air conditioning system during summer period together with improving the quality of the indoor environment resulting in better health and productivity of the occupants.