Internode number and length are the foundation to constitute plant height, ear height and the above-ground spatial structure of maize plant. In this study, segregating populations were constructed between EHel with ex...Internode number and length are the foundation to constitute plant height, ear height and the above-ground spatial structure of maize plant. In this study, segregating populations were constructed between EHel with extremely low ear height and B73. Through the SNP-based genotyping and phenotypic characterization, 13 QTL distributed on the chromosomes (Chrs) of Chr1, Chr2, Chr5-Chr8 were detected for four traits of internode no. above ear (INa), average internode length above ear (ILaa), internode no. below ear (INb), and average internode length below ear (ILab). Phenotypic variation explained (PVE) by a single QTL ranged from 6.82% (qILab2-2) to 12.99% (qILaa5). Zm00001d016823 within the physical region of qILaa5, the major QTL for ILaa with the largest PVE was determined as the candidate through the genomic annotation and sequence alignment between EHel and B73. Product of Zm00001d016823 was annotated as a WEB family protein homogenous to At1g75720. qRT-PCR assay showed that Zm00001d016823 highly expressed within the tissue of internode, exhibiting statistically higher expression levels among internodes of IN4 to IN7 in EHel than those in B73 (P Zm00001d016823 might provide novel insight into molecular mechanism beyond phytohormones controlling internode development in maize.展开更多
Development of cytoplasmic male sterile (CMS) lines with elongated uppermost internode (EUI) trait provides a genetic option to eliminate the use of GA 3 in hybrid rice. During the past two decades, extensive work
We analyzed the relationship between internode number and intemode length for one of the largest bamboo, Phyllostachys pubescens Mazel ex Houz. For 50 sample culms with various sizes felled in a pure stand of P. pubes...We analyzed the relationship between internode number and intemode length for one of the largest bamboo, Phyllostachys pubescens Mazel ex Houz. For 50 sample culms with various sizes felled in a pure stand of P. pubescens, the intemode number was assigned from base to tip and the length for each internode was directly measured. The result indicated that the intemode length should be cumulated from base to tip, and then the cumulated internode length should be relativized by the total culm length. It was inappropriate to relativize the internode length by the maximum intenode length. In addition, the relationship between the relative internode number （the intemode number relativized by the total number of intemodes） and the relative cumulated internode length should be described not by a power function but by a sigmoid function such as the third-order function. The determined function enabled us to estimate the actual internode length, with the root mean squared error being 4 cm. In conclusion, the mathematical expression presented here, i.e., the relativization of the cumulated internode length by the total culm length and the application of the sigmoid function, will be useful in describing the relationship between internode number and internode length for P. pubescens.展开更多
Changxuan 3S, a thermo-sensitive genic male sterile （TGMS） rice line with eui gene, is derived from the TGMS rice line Pei＇ai 64S by irradiation with 350 Gy of ^60Co γ-ray. To elucidate the uppermost internode elo...Changxuan 3S, a thermo-sensitive genic male sterile （TGMS） rice line with eui gene, is derived from the TGMS rice line Pei＇ai 64S by irradiation with 350 Gy of ^60Co γ-ray. To elucidate the uppermost internode elongation of the TGMS line with eui gene, Changxuan 3S and its parent Pei＇ai 64S were used to study the effects of temperature on panicle exsertion. At 24℃, the uppermost internode of Changxuan 3S elongated the fastest from the 4^th day before flowering to 0 day （flowering）, being 2.1-fold as that of Pei＇ai 64S, whereas it elongated slowly during the 12^th day to the 4^th day before flowering and the 1^st to the 3^rd day after flowering. The uppermost internode of Changxuan 3S exserted from the flag leaf sheath at 22℃, 24℃ and 26℃, and the length of elongated uppermost internode increased with the decreasing temperatures. At 28℃, though the panicles of Changxuan 3S were still enclosed in the leaf sheath, the degree of panicle enclosure was significantly lower compared with Pei＇ai 64S. Cytological studies on Changxuan 3S showed that the uppermost internode elongation was attributed to the increase of cell number and cell elongation, and the latter was more significant. Moreover, the numbers of outermost and innermost parenchyma cells and the cell length of the uppermost internode reduced with the increasing temperatures.展开更多
Performing the genetic mechanism research of internode length in bitter gourd has important guiding significance for making breeding strategy. A cross was made between CN19-1 and Thai4-6, and an F2 segregation populat...Performing the genetic mechanism research of internode length in bitter gourd has important guiding significance for making breeding strategy. A cross was made between CN19-1 and Thai4-6, and an F2 segregation population was constructed. The genetic characteristic of the internode length was analyzed through employing the major gene plus polygene mixed genetic model. The results showed that the internode length was continuous distribution in the F2 population. The optimum model for internode length genetic analysis was B-1. The additive effect values of two pairs of major genes controlling the internode length were 3.206 3 and 2.638 3, respectively, which showed a positive effect. The dominant effect values were-3.434 6 and-1.459 6, respectively, which showed a negative effect. The dominant degree of major genes is-1.07 and-0.55, respectively, indicating that the first pair of major genes was over dominant and the second pair of major genes was incompletely dominant. The heritability of the major gene was 82.25%, indicating the genetic stability was high. This study could provide a theoretical reference for the breeding of bitter gourd.展开更多
文摘Internode number and length are the foundation to constitute plant height, ear height and the above-ground spatial structure of maize plant. In this study, segregating populations were constructed between EHel with extremely low ear height and B73. Through the SNP-based genotyping and phenotypic characterization, 13 QTL distributed on the chromosomes (Chrs) of Chr1, Chr2, Chr5-Chr8 were detected for four traits of internode no. above ear (INa), average internode length above ear (ILaa), internode no. below ear (INb), and average internode length below ear (ILab). Phenotypic variation explained (PVE) by a single QTL ranged from 6.82% (qILab2-2) to 12.99% (qILaa5). Zm00001d016823 within the physical region of qILaa5, the major QTL for ILaa with the largest PVE was determined as the candidate through the genomic annotation and sequence alignment between EHel and B73. Product of Zm00001d016823 was annotated as a WEB family protein homogenous to At1g75720. qRT-PCR assay showed that Zm00001d016823 highly expressed within the tissue of internode, exhibiting statistically higher expression levels among internodes of IN4 to IN7 in EHel than those in B73 (P Zm00001d016823 might provide novel insight into molecular mechanism beyond phytohormones controlling internode development in maize.
文摘Development of cytoplasmic male sterile (CMS) lines with elongated uppermost internode (EUI) trait provides a genetic option to eliminate the use of GA 3 in hybrid rice. During the past two decades, extensive work
基金supported in part by the fiscal 2010 special grant from the president of the Prefectural University of Kumamoto
文摘We analyzed the relationship between internode number and intemode length for one of the largest bamboo, Phyllostachys pubescens Mazel ex Houz. For 50 sample culms with various sizes felled in a pure stand of P. pubescens, the intemode number was assigned from base to tip and the length for each internode was directly measured. The result indicated that the intemode length should be cumulated from base to tip, and then the cumulated internode length should be relativized by the total culm length. It was inappropriate to relativize the internode length by the maximum intenode length. In addition, the relationship between the relative internode number （the intemode number relativized by the total number of intemodes） and the relative cumulated internode length should be described not by a power function but by a sigmoid function such as the third-order function. The determined function enabled us to estimate the actual internode length, with the root mean squared error being 4 cm. In conclusion, the mathematical expression presented here, i.e., the relativization of the cumulated internode length by the total culm length and the application of the sigmoid function, will be useful in describing the relationship between internode number and internode length for P. pubescens.
文摘Changxuan 3S, a thermo-sensitive genic male sterile （TGMS） rice line with eui gene, is derived from the TGMS rice line Pei＇ai 64S by irradiation with 350 Gy of ^60Co γ-ray. To elucidate the uppermost internode elongation of the TGMS line with eui gene, Changxuan 3S and its parent Pei＇ai 64S were used to study the effects of temperature on panicle exsertion. At 24℃, the uppermost internode of Changxuan 3S elongated the fastest from the 4^th day before flowering to 0 day （flowering）, being 2.1-fold as that of Pei＇ai 64S, whereas it elongated slowly during the 12^th day to the 4^th day before flowering and the 1^st to the 3^rd day after flowering. The uppermost internode of Changxuan 3S exserted from the flag leaf sheath at 22℃, 24℃ and 26℃, and the length of elongated uppermost internode increased with the decreasing temperatures. At 28℃, though the panicles of Changxuan 3S were still enclosed in the leaf sheath, the degree of panicle enclosure was significantly lower compared with Pei＇ai 64S. Cytological studies on Changxuan 3S showed that the uppermost internode elongation was attributed to the increase of cell number and cell elongation, and the latter was more significant. Moreover, the numbers of outermost and innermost parenchyma cells and the cell length of the uppermost internode reduced with the increasing temperatures.
基金Supported by National Natural Science Foundation of China(31601758)
文摘Performing the genetic mechanism research of internode length in bitter gourd has important guiding significance for making breeding strategy. A cross was made between CN19-1 and Thai4-6, and an F2 segregation population was constructed. The genetic characteristic of the internode length was analyzed through employing the major gene plus polygene mixed genetic model. The results showed that the internode length was continuous distribution in the F2 population. The optimum model for internode length genetic analysis was B-1. The additive effect values of two pairs of major genes controlling the internode length were 3.206 3 and 2.638 3, respectively, which showed a positive effect. The dominant effect values were-3.434 6 and-1.459 6, respectively, which showed a negative effect. The dominant degree of major genes is-1.07 and-0.55, respectively, indicating that the first pair of major genes was over dominant and the second pair of major genes was incompletely dominant. The heritability of the major gene was 82.25%, indicating the genetic stability was high. This study could provide a theoretical reference for the breeding of bitter gourd.
