Modified method for extraction of watershed boundary with digital elevation modeling

Boundary extraction of watershed is an important step in forest landscape research. The boundary of the upriver wa-tershed of the Hunhe River in the sub-alpine Qingyuan County of eastern Liaoning Province, China was extracted by digital elevation modeling (DEM) data in ArcInfo8.1. Remote sensing image of the corresponding region was applied to help modify its copy according to Enhanced Thematic Mapper (ETM) image抯 profuse geomorphological structure information. Both the DEM-dependent boundary and modified copy were overlapped with county map and drainage network map to visually check the effects of result. Overlap of county map suggested a nice extraction of the boundary line since the two layers matched precisely, which indicated the DEM-dependent boundary by program was effective and precise. Further upload of drainage network showed discrepancies between the boundary and the drainage network. Altogether, there were three sections of the extraction result that needed to correct. Compared with this extraction boundary, the modified boundary had a better match to the drainage network as well as to the county map. Comprehensive analysis demonstrated that the program extraction has generally fine precision in position and excels the digitized result by hand. The errors of the DEM-dependant extraction are due to the fact that it is difficult for program to recognize sections of complex landform especially altered by human activities, but these errors are discernable and adjustable because the spatial resolution of ETM image is less than that of DEM. This study result proved that application of remote sensing information could help obtain better result when DEM method is used in extraction of watershed boundary.

Determining topographic shielding from digital elevation models for cosmogenic nuclide analysis: a GIS model for discrete sample sites

Topographic shielding(TS) is an important factor in cosmogenic nuclide surface exposure dating. The development of geographic information systems(GIS) and the availability of digital elevation models(DEMs) make it possible to derive this factor directly from a DEM. Most available GIS models derive the TS factors for an area(all cells in a DEM) without the consideration of surface conditions of individual sites, such as the strike, dip,and height above ground, into the calculation. This paper presents a new GIS model to derive the TS factors for discrete sample sites. This model uses the Skyline and Skyline Graph functions in ArcGIS to extract the set of azimuth and elevation angles of topographic obstructions around each site from a DEM(considering the sample height above ground)and then incorporates the strike and dip information of the sample surface to derive the TS factor. All processing tools and steps are streamlined in ArcGIS modelbuilder and this model can be run like a standard ArcGIS geoprocessing tool. It provides an easy and user-friendly means to derive the TS factors for discrete samples based on a DEM and the measured strike, dip and sample height for each site.

Extraction and Analysis of Gully Head of Loess Plateau in China Based on Digital Elevation Model

In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms.

Determining Topographic Shielding from Digital Elevation Models for Cosmogenic Nuclide Analysis:a GIS Approach and Field Validation

Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators. This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models （DEMs）. This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface. The DEM-derived parameters using this method were validated with field measurements in central Tian Shan. Results indicate that DEM-derived shielding factors are consistent with field-measured values. It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenie nuclide results.

Effect of digital elevation models on monitoring slope displacements in open-pit mine by differential interferometry synthetic aperture radar

Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.

Uncertainty of Slope Length Derived from Digital Elevation Models of the Loess Plateau, China

Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availability and accuracy of soil erosion as well as hydrological modeling. This study investigates the formation and distribution of existing errors and uncertainties in slope length derivation based on 5-m resolution DEMs of the Loess Plateau in the middle of China. The slope length accuracy in three different landform areas is examined to analyse algorithm effects. The experiments indicate that the accuracy of the flat test area is lower than that of the rougher areas. The value from the specific contributing area(SCA) method is greater than the cumulative slope length(CSL), and the differences between these two methods arise from the shape of the upslope area. The variation of mean slope length derived from various DEM resolutions and landforms. The slope length accuracy decreases with increasing grid size and terrain complexity at the six test sites. A regression model is built to express the relationship of mean slope length with DEM resolution less than 85 m and terrain complexity represented by gully density. The results support the understanding of the slope length accuracy, thereby aiding in the effective evaluation of the modeling effect of surface process.

Facets of Uncertainty in Digital Elevation and Slope Modeling

This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.

Comparative study and error analysis of digital elevation model interpolations

Researchers in P.R.China commonly create triangulate irregular networks(TINs) from contours and then convert TINs into digital elevation models(DEMs).However,the DEM produced by this method can not precisely describe and simulate key hydrological features such as rivers and drainage borders.Taking a hilly region in southwestern China as a research area and using ArcGISTM software,we analyzed the errors of different interpolations to obtain distributions of the errors and precisions of different algorithms and to provide references for DEM productions.The results show that different interpolation errors satisfy normal distributions,and large error exists near the structure line of the terrain.Furthermore,the results also show that the precision of a DEM interpolated with the Australian National University digital elevation model(ANUDEM) is higher than that interpolated with TIN.The DEM interpolated with TIN is acceptable for generating DEMs in the hilly region of southwestern China.

LAN Tool: A GIS Tool for the Improvement of Digital Elevation Models Using Drainage Network Attributes

Digital Elevation Models (DEMs) are constructed using altitude point data and various interpolation techniques. The quality and accuracy of DEMs depend on data point density and the interpolation technique used. Usually however, altitude point data especially in plain areas do not provide realistic DEMs, mainly due to errors produced as a result of the interpolation technique, resulting in imprecise topographic representation of the landscape. Such inconsistencies, which are mainly in the form of surface depressions, are especially crucial when DEMs are used as input to hydrologic modeling for impact studies, as they have a negative impact on the model’s performance. This study presents a Geographical Information System (GIS) tool, named LAN (Line Attribute Network), for the improvement of DEM construction techniques and their spatial accuracy, using drainage network attributes. The developed tool does not alter the interpolation technique, but provides higher point density in areas where most DEM problems occur, such as lowland areas or places where artificial topographic features exist. Application of the LAN tool in two test sites showed that it provides considerable DEM improvement.

基于DEM的雷达阵地选址预处理方法研究

防空预警雷达阵地选址的优劣直接影响雷达本身及防空武器作战效能的发挥.针对基于数字高程模型(DEM)的常规实时计算方法存在耗时、耗力的问题,在明确阵地选址预处理内容的基础上,提出了预处理的具体流程和参数计算方法.通过数据预处理,以空间换时间的方式解决了阵地自动选址计算量大、耗时长的问题.实例仿真结果表明,该雷达阵地选址预处理方法大大缩短了自动选址时间,有效提高了选址效率.

基于Urban DEM的3D GIS可视化分析

针对如何快速和精确地构建Urban DEM,以及如何基于Urban DEM进行3D可视化分析,利用南京旧城区1 500地形图和建筑规划图构建5 m分辨率的Urban DEM,在此基础上探讨3D可视化分析方法。实验结果证明,基于Urban DEM进行3D可视化分析具有可行性。

Modelling of piping collapses and gully headcut landforms: Evaluating topographic variables from different types of DEM

The geomorphic studies are extremely dependent on the quality and spatial resolution of digital elevation model(DEM)data.The unique terrain characteristics of a particular landscape are derived from DEM,which are responsible for initiation and development of ephemeral gullies.As the topographic features of an area significantly influences on the erosive power of the water flow,it is an important task the extraction of terrain features from DEM to properly research gully erosion.Alongside,topography is highly correlated with other geo-environmental factors i.e.geology,climate,soil types,vegetation density and floristic composition,runoff generation,which ultimately influences on gully occurrences.Therefore,terrain morphometric attributes derived from DEM data are used in spatial prediction of gully erosion susceptibility(GES)mapping.In this study,remote sensing-Geographic information system(GIS)techniques coupled with machine learning(ML)methods has been used for GES mapping in the parts of Semnan province,Iran.Current research focuses on the comparison of predicted GES result by using three types of DEM i.e.Advanced Land Observation satellite(ALOS),ALOS World 3D-30 m(AW3D30)and Advanced Space borne Thermal Emission and Reflection Radiometer(ASTER)in different resolutions.For further progress of our research work,here we have used thirteen suitable geo-environmental gully erosion conditioning factors(GECFs)based on the multi-collinearity analysis.ML methods of conditional inference forests(Cforest),Cubist model and Elastic net model have been chosen for modelling GES accordingly.Variable’s importance of GECFs was measured through sensitivity analysis and result show that elevation is the most important factor for occurrences of gullies in the three aforementioned ML methods(Cforest=21.4,Cubist=19.65 and Elastic net=17.08),followed by lithology and slope.Validation of the model’s result was performed through area under curve(AUC)and other statistical indices.The validation result of AUC has shown that Cforest is the most appropriate model for predicting the GES assessment in three different DEMs(AUC value of Cforest in ALOS DEM is 0.994,AW3D30 DEM is 0.989 and ASTER DEM is 0.982)used in this study,followed by elastic net and cubist model.The output result of GES maps will be used by decision-makers for sustainable development of degraded land in this study area.

DEM数据坐标转换和成果质量的检查方法

针对数字高程模型(DEM)数据三维坐标转换和转换成果质量检查的需求,本文研究了基于阿尔克·吉斯(ArcGIS)开发引擎平台的DEM数据的平面和高程坐标转换技术方法;同时根据DEM数据本身的特点,研究确定了合理的DEM数据转换成果质量检查内容和指标,解决了DEM数据转换成果质量检查标准的实际生产应用问题。本项目研究成果可保障北京市DEM数据在统一的基准下应用,推动与测绘地理信息相关的规划、建设和管理工作。

The J_2 invariant relative configuration of spaceborne SAR interferometer for digital elevation measurement

A 3-craft formation configuration is proposed to perform the digital elevation model （DEM） for the distributed spacebome interferometric synthetic aperture radar （InSAR）, and it is optimized by the modified ant colony algorithm to have the best compatibility with J2 invariant orbits created by differential correction algorithm. The configuration has succeeded in assigning the across-track baseline to vary periodically and with its mean value equal to the optimal baseline determined by the relative height measurement accuracy. The required relationship between crafts＇ magnitudes and phases is formulated for the general case of interferometry measure from non-orthographic and non-lateral view. The J2 invariant configurations created by differential correction algorithm are employed to investigate their compatibility with the required configuration. The colony algorithm is applied to search the optimal configuration holding the near-constant across-track baseline under the J2 perturbation, and the absolute height measurement accuracy is preferable as expected.

A MODEL FOR PROGRAMMING DESIGN INTERVENTIONS AIMED AT REDUCING THERMAL DISCOMFORT IN URBAN OPEN SPACES:A Case Study on the Politecnico di Milano Campus

The environmental quality of urban spaces is strongly related to the thermal comfort perceived by people in open areas.At the micro-scale of neighbourhoods,the mitigation of the heat island effect can improve both the well-being of cityusers in the public realm and the energy performance of buildings.A model intended for urban designers is presented,and it sets out to evaluate critical areas in the city context and define sustainable design solutions and concrete actions on the physical environment,in order to increase thermal comfort.In particular,variables used in the model are basically related to urban geometry,such as the accessibility of sunlight,sky view factors,aspect ratios of street canyons,and to the physical materials in the city,such as the albedo of horizontal and vertical surfaces and vegetation density.The technique is based on the use of algorithms defi ned in a Matlab environment and derived from image processing of Digital Elevation Models(DEMs)of the urban texture.The application was tested on the case study of the Politecnico di Milano’s main campus,located in the city of Milan.Especially in the case of limited resources,the results of the analysis suggest how public administrators and decision-makers could benefi t from programming specific site interventions,based on the identification of critical weaknesses emerging at several points in the city.Moreover,the study focuses on the application of cool surfaces,the role of building layout(shape and size)and the effects of increasing the vegetation.Even in the absence of expensive thermal imagery from remote sensing,but simply referring to available cartography,this low-cost technique makes it possible to very quickly set up feasible environmental strategies over extensive urban areas.Furthermore,this tool proves to be useful for existing urban areas,as well as for simulating the impact of new design schemes.

结合潮位与DEM的红树林遥感识别研究

以广西北部湾为研究区,针对潮位周期性变化导致稀疏低矮红树林难以被准确提取的问题,基于多潮位Landsat8 OLI图像和数字高程模型(DEM)数据,通过构建红树林识别决策树模型,并以支持向量机(SVM)为对照,评价结合潮位和DEM信息的决策树法提取红树林信息的可行性.研究结果表明:1)不同高度、不同密度以及不同潮位红树林之间光谱差异均较大,稀疏低矮红树林也与阴坡林地、水体-陆生植被混合像元光谱存在严重“异物同谱”效应;2)无论是基于低潮位、高潮位图像,还是多潮位图像,相比未区分高度和密度,在SVM中将细分为高密红树林和稀矮红树林,其总体精度(分为红树林和非红树林两类)可分别提高4.65、4.41和7.22个百分点;3)基于多潮位图像及DEM的决策树模型识别的总体精度和Kappa系数分别为98.80%和0.973,比SVM中最佳值分别高出1.62个百分点和0.035.因此,通过同时考虑红树林高度、密度、潮位和DEM等特征,可明显提高红树林遥感识别的精度.

基于数字高程模型(DEM)的溧阳天目湖地区地貌区划

江苏溧阳天目湖地区地貌单元的划分可以提升分区、分类型、分层次的地表基质调查效率。基于天目湖地区5 m分辨率的数字高程模型(DEM),应用GIS软件提取高程、坡度、地形起伏度信息;在提取地形起伏度的过程中运用邻域分析法与均值变点法,确定提取地形起伏度的最佳分析窗口大小为37×37像元。将地形起伏度、海拔高程及坡度3种地形要素进行空间叠加分析,并对地貌分布格局与差异变化进行初步探讨,提出将天目湖地区地貌指标划分为平原、河流阶地、山间谷地、台地、丘陵5种类型,其中以山间谷地与台地地貌为主,二者分别占32.97%、21.96%。划分结果符合天目湖地区地貌格局差异及空间分布,有效体现出天目湖地区平原向丘陵过渡的地貌特征,为后续开展地表基质的调查工作提供较为可靠的地理依据,对探究地貌分布格局与地表基质属性差异具有一定的意义。

基于多尺度DEM一体化融合技术构建水利枢纽三维地形技术研究与应用

本文通过研究多尺度DEM一体化融合技术,构建了水利枢纽的三维地形模型,并深入研究了该技术在数字孪生乌鲁瓦提水利工程汛期模拟、汛期预演、汛期预警中的应用。首先对不同尺度DEM数据进行预处理,如数据清洗和去噪,以提高数据质量,然后采用多尺度分析方法,将不同尺度的DEM数据进行一体化融合,得到更准确、全面的地形信息。该技术的核心是基于多分辨率频域融合方法,将高分辨率DEM数据与低分辨率的DEM数据结合起来。通过分析不同尺度上的地形特征,可以提取出更丰富的地貌信息,为水利工程的规划和设计提供了重要的参考依据。

GIS环境下基于DEM的中国流域自动提取方法

应用地理信息系统平台 ,建立基于水文站网和水资源信息的空间化水循环数据库是研制开发全国水循环信息管理系统的关键和基础 ,为了与全国水文站网的观测资料相匹配 ,水循环数据库的结构将按流域组织 ,因此快速、有效地自动提取全国流域是所有工作进展的前提。为了从数字高程数据中自动提取全国流域 ,以提高基于GIS的全国水资源信息获取的效率 ,从DEM的特性出发 ,提出了一种从DEM中自动提取全国流域的实用方法。该方法利用 1:2 5万DEM数据 ,首先将全国流域划分为 14大流域片 ,并在每一流域片内分别提取流域。提取过程如下 :首先对DEM数据进行填洼和削峰 ,然后确定每个栅格单元的水流方向 ,再根据各栅格单元的水流方向 ,计算出每个栅格单元的汇流能力 ,根据汇流能力采用阈值法确定河流网络 ,最后通过河流网络和流域出水口 ,快速识别出所有子流域。另外 ,还给出了利用GIS软件ARC/INFOGRID提取全国流域的AML程序代码 ,并以海河流域作为实验区将抽样测量结果和自动提取结果进行了实验对比分析 ,其结果表明利用该方法提取的流域数据与利用手工方法绘制的流域基本一致 ,证明该方法是有效的。

基于ArcGIS环境下DEM流域特征提取及应用

该文详细介绍了ArcGIS9.2中的水文分析工具箱的使用方法,包括从原始DEM数据提取河网的步骤、应注意的问题等。研究区域选取位于北京山区的红门川小流域,采用1∶10000的比例尺、10m分辨率的DEM作为基本的地形数据,应用ESRI公司开发的ArcGIS9.2地理信息系统软件进行流域水文信息特征的提取;并利用SWAT模型运行水文响应单元(HRUs)的生成,共生成了25个子流域和92个HRUs。经分析,得到的研究区域河网特征以及研究区其他常用的流域特征信息,与实际河流水系特征基本吻合,因此应用DEM划分的流域结果是合理的。