Design and verification of an improved experimental platform for stray current in urban rail transit

With the rapid development of urban rail transit,there have been an urgent problem of excessive stray current.Because the stray current distribution is random and difficult to verify in the field,we designed an improved stray current experimental platform by replacing the simulated aqueous solution with a real soil environment and by calculating the transition resistance by measuring the soil resistivity,which makes up for the defects in the previous references.Firstly,the mathematical models of rail-drainage net and rail-drainage netground were established,and the analytical expressions of current and voltage of rail,drainage net and other structures were derived.In addition,the simulation model was built,and the mathematical analysis results were compared with the simulation results.Secondly,the accuracy of the improved stray current experimental platform was verified by comparing the measured and simulation results.Finally,based on the experimental results,the influence factors of stray current were analyzed.The relevant conclusions provide experimental data and theoretical reference for the study of stray current in urban rail transit.

Greenhouse gas emission analysis and measurement for urban rail transit: A review of research progress and prospects

Rail transit plays a key role in mitigating transportation system carbon emissions.Accurate measurement of urban rail transit carbon emission can help quantify the contribution of urban rail transit towards urban transportation carbon emission reduction.Since the whole life cycle of urban rail transit carbon emission measurement involves a wide range of aspects,a systematic framework model is required for analysis.This research reviews the existing studies on carbon emission of urban rail transit.First,the characteristics of urban rail transit carbon emission were determined and the complexity of carbon emission measurement was analyzed.Then,the urban rail transit carbon emission measurement models were compared and analyzed in terms of the selection of research boundaries,the types of greenhouse gas(GHG)emissions calculation,and the accuracy of the measurement.Following that,an intelligent station was introduced to analyze the practical application of digital collaboration technology and energy-saving and carbon-reducing system platforms for rail transit.Finally,the urgent problems and future research directions at this stage were discussed.This research presents the necessity of establishing a dynamic carbon emission factor library and the important development trend of system integration of carbon emission measurement and digital system technology.

Function Analysis of Urban Rail Transit Smart Station

In order to make rail transit smart stations serve passengers better,the potential of smart stations should be optimized to reduce time cost,and relieve traffic congestion.In this paper,the construction of smart stations based on the management experience of a subway station and the benefits of smart stations were analyzed and discussed.The construction of smart stations,as well as the key technologies for the construction of smart stations,will aid in the automation and intelligent management of subway stations.

Research of BIM Technology in Urban Rail Operation and Maintenance and Application

With the rapid development of urban rail transit,the traditional operation and maintenance methods mainly rely on manpower,and the pressure on equipment operation and maintenance is increasing,and the low work efficiency,high intensity and high operating costs have always been the main problems at this stage.Through BIM visualization technology can effectively solve those problems,the operation and maintenance mode of urban rail signal equipment at this stage is discussed,the integration and visualization of BIM technology are used to make the judgments and early warnings on the maintenance of urban rail signal equipment,and play a positive and important role in operation and maintenance work,this research result can provide ideas and references for urban rail transit operation and maintenance in the new era.

Passenger flow dynamic assignment model of urban mass transit and its application during interval interrupted operation

In order to find a method which can describe the passenger flow dynamical distribution of urban mass transit during interval interrupted operation,an urban railway network topology model was built based on the travel path dual graph by considering interchange,crowd and congestion.The breadth first valid travel path search algorithm is proposed,and the multipath passenger flow distribution logit model is improved.According to the characteristics of passengers under the interruption condition,the distribution rules of different types of passenger flow are proposed.The method of calculating the aggregation number of station is proposed for the case of insufficient transport capacity.Finally,the passenger flow of Beijing urban mass transit is simulated for the case study.The results show that the relative error of most of transfer passenger flow is below 10%.The proposed model and algorithm can accurately assign the daily passenger flow,which provides a theoretical basis for urban mass transit emergency management and decision.

Future 5G-Oriented System for Urban Rail Transit:Opportunities and Challenges

As a development direction of urban rail transit system,the train autonomous circumambulate system(TACS)can operate in a safer,more efficient,and more economical mode.However,most urban rail transit systems transmit signals through industrial,scientific,and medical(ISM)frequency bands or narrow frequency bands,which cannot meet the requirements of TACS.As a promising solution,the 5th generation(5G)mobile communication provides more services for the future urban rail transit systems,and covers the shortages of exiting communication technologies in terms of capacity and reliability.In this paper,we first briefly review the research status of current train control system and introduce its limitations.Next,we propose a novel network architecture,and present new technologies and requirements of the proposed architecture for TACS.Some potential challenges are then discussed to give insights for further research of TACS.

Optimization of train plan for urban rail transit in the multi-routing mode

The train plan of urban rail transit under multi-routing mode can be divided into three parts： train formation, train operation periods and corresponding train counts of each routing in each period. Based on the analysis of passen- ger＇s general travel expenses and operator＇s benefits, the constraints and objective functions are defined and the multiobjective optimization model for the train plan of urban rail transit is presented. Factors considered in the multi- objective optimization model include transport capacity, the requirements of traffic organization, corporation benefits, passenger demands, and passenger choice behavior under multi-train-routing mode. According to the characteristics of this model and practical planning experience, a three-phase solution was designed to gradually optimize the train formarion, train counts as well as operation periods. The instance of Changsha Metro Line 2 validates the feasibility and efficiency of this approach.

Influence of soil resistivity on stray current in power supply system of urban rail transit

In order to explore the influence of soil resistivity on stray current in power supply system of urban rail transit,we establish an equivalent circuit model of the rail-to-ground structure based on resistance network method first.After measuring the soil resistivity of a real subway system,a simulation model is established in Matlab to obtain the stray currents at different soil resistivities.Then the influence of soil resistivity on stray current is analyzed.Afterwards,to verify the rationality and reliability of the simulation model,we design a test circuit to measure the stray current and rail-to-ground voltage in a real subway system,and a comparison of the experimentally measured results and simulation results is presented.The results show that the stray current is the maximum when the soil resistivity is 211.57Ω·m;when the soil resistivity is 768.47Ω·m,the stray current is the minimum,that is,the smaller the soil resistivity,the greater the stray current.Therefore,the resistivity should be increased as much as possible when ramming the track foundation in urban rail transit system.

Combination forecast for urban rail transit passenger flow based on fuzzy information granulation and CPSO-LS-SVM

In order to obtain the trend of urban rail transit traffic flow and grasp the fluctuation range of passenger flow better,this paper proposes a combined forecasting model of passenger flow fluctuation range based on fuzzy information granulation and least squares support vector machine(LS-SVM)optimized by chaos particle swarm optimization(CPSO).Due to the nonlinearity and fluctuation of the passenger flow,firstly,fuzzy information granulation is used to extract the valid data from the window according to the requirement.Secondly,CPSO that has strong global search ability is applied to optimize the parameters of the LS-SVM forecasting model.Finally,the combined model is used to forecast the fluctuation range of early peak passenger flow at Tiyu Xilu Station of Guangzhou Metro Line 3 in 2014,and the results are compared and analyzed with other models.Simulation results demonstrate that the combined forecasting model can effectively track the fluctuation of passenger flow,which provides an effective method for predicting the fluctuation range of short-term passenger flow in the future.

Energy management and coordination control of microgrid in elevated station of urban rail transit

The rapid development of urban rail transit brings convenience to the public,but its huge energy consumption problem cannot be ignored.A microgrid composed of photovoltaic power generation unit,regenerative braking energy feedback unit and battery energy storage unit is proposed,which provides green power for the station.In order to suppress the fluctuation of photovoltaic power generation and the intermittence of regenerative braking feedback energy,the energy management mode of microgrid is designed according to the illumination situation,braking energy feedback situation,battery state of charge and so on.In addition,a coordination control method based on virtual synchronous generator(VSG)is proposed to realize smooth switching among modes.Finally,the proposed energy management and coordination control method for elevated station microgrid is verified by Matlab/Simulink.The results show that the elevated station microgrid can operate safely and reliably under various energy management modes and realize smooth switching among modes.

Urban rail departure capacity analysis based on a cellular automaton model

As an important traffic mode, urban rail transit is constantly developing toward improvement in service capacity and quality. When an urban rail transit system is evaluated in terms of its service capacity, the train departure capacity is an important index that can objectively reflect the service level of an urban rail transit facility. In light of the existing cellular automaton models, this paper proposes a suitable cellular automaton model to analyze the train departure capacity of urban rail transit under different variable factors and conditions. The established model can demonstrate the train operating processes by implementing the proposed sound rules, including the rules of train departure at the origin and intermediate stations, and the velocity and position updating rules. The properties of train traffic are analyzed via numerical experiments. The numerical results show that the departure capacity is negatively affected by the train departure control manner. In addition, （i） the real-time signal control can offer a higher train service frequency; （ii） the departure capacity gradually rises with the decrease in the line design speed to a limited extent; （iii） the departure capacity decreases with extension in the train length; （iv） the number of departed trains decreases as the train stop time increases; （v） the departure capacity is not affected by the section length. However, the longer the length, the worse the service quality of the urban rail transit line. The experiments show that the proposed cellular automaton model can be used to analyze the train service capacity of an urban rail transit system by performing quantitative analysis under various considered factors, conditions, and management modes.

Industrial frequency single-phase AC traction power supply system for urban rail transit and its key technologies

To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.

Landscape Design of Urban Rail Transit Complex Based on the Concept of Sustainable Development

On the basis of current development of urban rail transit complex in China,this paper proposed that it is necessary to build a complete landscape design system of urban traffic complex.Combined with the concept of sustainable urban landscape design,this paper explored landscape design of urban rail transit complex from the macroscopic,mesocopic and microscopic perspective,and analyzed many design cases to provide references for the sustainable landscape design of urban rail transit complex in China.

Research on Obstacle Detection Method of Urban Rail Transit Based on Multisensor Technology

With the rapid development of urban rail transit,passenger traffic is increasing,and obstacle violations are more frequent,and the safety of train operation under high-density traffic conditions is becoming more and more thought provoking.In order to monitor the train operating environment in real time,this paper first adopts multisensing technology based on machine vision and lidar,which is used to collect video images and ranging data of the track area in real time,and then it performs image preprocessing and division of regions of interest on the collected video.Then,the obstacles in the region of interest are detected to obtain the geometric characteristics and position information of the obstacles.Finally,according to the danger degree of obstacles,determine the degree of impact on the train operation,and use the signal system automatic response ormanual response mode to transmit the detection results to the corresponding train,so as to control the train operation.Through simulation analysis and experimental verification,the detection accuracy and control performance of the detection method are confirmed,which provides safety guarantee for the train operation.

Integrated Layout and Transfer of Urban Rail Transit Hubs

This paper is engaged in the research of urban rail transit hub integration and transfer.Firstly,this paper focuses on the space division,the aggregation form of hub subsystems,the spatial layout of hub subsystems,and the design of integrated functions to achieve an integrated layout.In addition,this study also conducted a selection of transfer classification and transfer station layout of urban rail transit hubs,with the aims to promote the improvement of the functions of urban rail transit hubs,the rationality of transfers,and to improve the service quality of the hub system which meet the demand of the public travel.

Rational scale of urban rail transit network based on system dynamics

Urban rail transit(URT) has been playing an important role in urban sustainable development with its advantages of high speed,large capacity,high efficiency and low pollution.Estimating URT network scale is the key to ensure the scientificity and feasibility of its construction.The existing studies on rational scale of URT network have not dealt with the interaction of supply and demand.This paper describes the establishment of a system dynamics model of rational URT network scale determination,considering the interaction between URT construction and city social economic development as well as the dynamic equilibrium of capital supply and traffic demand,and the verification of the model validity by applying it to the case of Wuhan City's URT construction.

Differential Evolution for Urban Transit Routing Problem

The urban transit routing problem (UTRP) involves the construction of route sets on existing road networks to cater for the transit demand efficiently. This is an NP-hard problem, where the generation of candidate route sets can lead to a number of potential routes being discarded on the grounds of infeasibility. This paper presents a new repair mechanism to complement the existing terminal repair and the make-small-change operators in dealing with the infeasibility of the candidate route set. When solving the UTRP, the general aim is to determine a set of transit route networks that achieves a minimum total cost for both the passenger and the operator. With this in mind, we propose a differential evolution (DE) algorithm for solving the UTRP with a specific objective of minimizing the average travel time of all served passengers. Computational experiments are performed on the basis of benchmark Mandl’s Swiss network. Computational results from the proposed repair mechanism are comparable with the existing repair mechanisms. Furthermore, the combined repair mechanisms of all three operators produced very promising results. In addition, the proposed DE algorithm outperformed most of the published results in the literature.

National Standards for Urban Rail Transit

In this paper, we suggest the creation of passenger service standards for urban rail transit. We put forward standards suited for China's actual conditions, aimed at meeting an international level of service based on customer-oriented principles.

Analysis of STC Fault in Urban Rail Transit Station of Mobile Block System

Mobile block system is a new type of block technology based on the theory of interval block. This article focuses on the analysis of safety key points, the efficient use of emergency time, the maximum efficiency of mobilizers, to reduce the loss of emergency incidents and casualties.

The Research on Energy Saving Technology Management of Urban Rail Transit

This paper summarizes the encrgy consumption of rail transit and the current situation of energy saving. Then it puts forward a number of policy support measures on the technology management from several aspects, such as the raft line, traction power supply, energy-saving mode and so on The related research helps urban rail transit enterprises save energy consumption, reduce costs to improve their market competitiveness, as well as to promote the enterprises to fulfill social responsibility and carry out the sustainable development idea.