WC-10Co cemented carbides with finer WC and narrower grain size distributions are produced by using(Cr,V)_(2)(C,N)as grain growth inhibitors.As a result,with the increase of(Cr_(0.9),V_(0.1))_(2)(C,N)and(V_(0.9),Cr_(0...WC-10Co cemented carbides with finer WC and narrower grain size distributions are produced by using(Cr,V)_(2)(C,N)as grain growth inhibitors.As a result,with the increase of(Cr_(0.9),V_(0.1))_(2)(C,N)and(V_(0.9),Cr_(0.1))_(2)(C,N),the grains size of WC and mean free path of Co phase decrease,and adjacency of WC increases.Refinement and homogenization of grains enhance the transverse rupture strength(TRS)and the hardness.Meanwhile,the deflection and bridging of cracks keep the fracture toughness at a respectable level.The WC-10Co-0.6(Cr_(0.9),V_(0.1))_(2)(C,N)-0.025(V_(0.9),Cr_(0.1))_(2)(C,N)cemented carbides exhibit excellent comprehensive mechanical properties with the TRS of 4602.6 MPa,hardness of 1835 kg/mm^(2),and fracture toughness of 10.39 MPa·m^(1/2),respectively.However,the large pores are caused by excess N larger than 0.03 wt%and deteriorates the mechanical properties.We provide a new approach to WC-Co cemented carbides preparation with a narrow grain size distribution by adding novel grain growth inhibitors.展开更多
Precipitation behavior of Ti in high strength steels was investigated by means of the equilibrium solid solubility theory. The contributions of Ti content to yield strength were calculated. The calculated results were...Precipitation behavior of Ti in high strength steels was investigated by means of the equilibrium solid solubility theory. The contributions of Ti content to yield strength were calculated. The calculated results were verified by the hot rolling experiment for C–Mn steel and C–Mn–Ti micro alloyed steel, respectively. The research results show that the precipitates are mainly Ti N at the higher temperature. With the decreasing temperature, the proportion of Ti C in precipitates increases gradually. When the temperature drops to 800 °C, Ti C will become predominant for the precipitation of Ti. When Ti content is less than 0.014%(mass fraction), Ti has little influence on the yield strength. When Ti content is in the range of 0.014%–0.03%(mass fraction), the yield strength of Ti micro alloyed steel is greatly increased, which leads to instability of the mechanical properties of the steel. Therefore, the design of Ti content in high strength steels should avoid this Ti content range. When Ti content is higher than 0.03%, the yield strength increases stably. In this experiment, when added Ti content was controlled in the range of 0.03%–0.05%, the contribution to the yield strength of Ti micro alloyed steel can reach about 92.44 MPa.展开更多
The precipitation behavior of V（C, N） in steels microalloyed with vanadium was researched using a thermal simulator during single-pass deformation at 800-750 ℃. The V（C, N） precipitates and its nucleation effect ...The precipitation behavior of V（C, N） in steels microalloyed with vanadium was researched using a thermal simulator during single-pass deformation at 800-750 ℃. The V（C, N） precipitates and its nucleation effect on ferrite were investigated by TEM and EDS. The experimental results show that there are two remarkable heterogeneous nucleation effects of V（C, N） particles precipitated before γ →/ α phase change： primary reason is that high coherency between V（C, N） and ferrite promotes V（C, N） to become a nucleating center of intragranular ferrite; secondary reason is that the coarsening of V（C, N） causes locally solute-poor region in austenite, thus expedites the nucleation of intragranular ferrites further. Furthermore, the relationship between the size and shape of V（C, N） was studied, and identification method was provided for distinguishing interphase precipitation and general precipitation to avoid erroneous judgment and misguide.展开更多
Austenite grain size is an important influence factor for ductility of steel at high temperatures during continuous casting. Thermodynamic and kinetics calculations were performed to analyze the characteristics of Ti(...Austenite grain size is an important influence factor for ductility of steel at high temperatures during continuous casting. Thermodynamic and kinetics calculations were performed to analyze the characteristics of Ti(C,N) precipitates formed during the continuous casting of micro-alloyed steel. Based on Andersen-Grong equation, a coupling model of second phase precipitation and austenite grain growth has been established, and the influence of second precipitates on austenite grain growth under different cooling rates is discussed. Calculations show that the final sizes of austenite grains are 2.155, 1.244, 0.965, 0.847 and 0.686 mm, respectively, under the cooling rate of 1, 3, 5, 7, and 10 ℃·s^(-1), when ignoring the pinning effect of precipitation on austenite growth. Whereas, if taking the pinning effect into consideration, the grain growth remains stable from 1,350 ℃, the calculated final sizes of austenite grains are 1.46, 1.02, 0.80, 0.67 and 0.57 mm, respectively. The sizes of final Ti(C,N) precipitates are 137, 79, 61, 51 and 43 nm, respectively, with the increase of cooling rate from 1 to 10 ℃·s^(-1). Model validation shows that the austenite size under different cooling rates coincided with the calculation results. Finally, the corresponding measures to strengthen cooling intensity at elevated temperature are proposed to improve the ductility and transverse crack of slab.展开更多
The precipitation of Ti(V)N(C)in high-carbon steel PD_3 during thermomechanicol treatment at austenitic temperatures after deformation has been observed.The average size of Ti(V)N(C)particles may reduce with the incre...The precipitation of Ti(V)N(C)in high-carbon steel PD_3 during thermomechanicol treatment at austenitic temperatures after deformation has been observed.The average size of Ti(V)N(C)particles may reduce with the increase of strain and the decrease of thermomechanical treatment temperature,and vise versa.The growth of Ti(V)N(C)particles at 920°C is found to be controlled by the interface reaction between precipitated particles and matrix.展开更多
Background:The nitrogen isotope natural abundance(δ^(15)N)provides integrated information on ecosystem N dynamics,and carbon isotope natural abundance(δ^(13)C)has been used to infer how water-using processes of plan...Background:The nitrogen isotope natural abundance(δ^(15)N)provides integrated information on ecosystem N dynamics,and carbon isotope natural abundance(δ^(13)C)has been used to infer how water-using processes of plants change in terrestrial ecosystems.However,howδ^(13)C andδ^(15)N abundances in plant life and soils respond to N addition and water availability change is still unclear.Thus,δ^(13)C andδ^(15)N abundances in plant life and soils were used to investigate the effects of long-time(10 years)N addition(+50 kg N·ha^(−1)·yr^(−1)and precipitation reduction(−30%of throughfall)in forest C and N cycling traits in a temperate forest in northern China.Results:We analyzed theδ^(13)C andδ^(15)N values of dominant plant foliage,litterfall,fungal sporophores,roots,and soils in the study.The results showed thatδ^(15)N values of foliage,litterfall,and surface soil layer’s(0–10 cm)total N were significantly increased by N addition,whileδ^(15)N values of fine roots and coarse roots were considerably decreased.Nitrogen addition also significantly increased theδ^(13)C value of fine roots and total N concentration of the surface soil layer compared with the control.The C concentration,δ^(13)C,andδ^(15)N values of foliage andδ^(15)N values of fine roots were significantly increased by precipitation reduction,while N concentration of foliage and litterfall significantly decreased.The combined effects of N addition and precipitation reduction significantly increased theδ^(13)C andδ^(15)N values of foliage as well as theδ^(15)N values of fine roots andδ^(13)C values of litterfall.Furthermore,foliarδ^(15)N values were significantly correlated with foliageδ^(13)C values,surface soilδ^(15)N values,surface soil C concentration,and N concentrations.Nitrogen concentrations andδ^(13)C values of foliage were significantly correlated withδ^(15)N values and N concentrations of fine roots.Conclusions:This indicates that plants increasingly take up the heavier 15N under N addition and the heavier 13C and 15N under precipitation reduction,suggesting that N addition and precipitation reduction may lead to more open forest ecosystem C and N cycling and affect plant nutrient acquisition strategies.展开更多
基金Funded by the 2021 Strategic Cooperation Project between Sichuan University and The People's Government of Zigong(No.2021CDZG-1)Major Science and Technology Research Projects of Panxi,Sichuan Province(No.2022PXZB-04)。
文摘WC-10Co cemented carbides with finer WC and narrower grain size distributions are produced by using(Cr,V)_(2)(C,N)as grain growth inhibitors.As a result,with the increase of(Cr_(0.9),V_(0.1))_(2)(C,N)and(V_(0.9),Cr_(0.1))_(2)(C,N),the grains size of WC and mean free path of Co phase decrease,and adjacency of WC increases.Refinement and homogenization of grains enhance the transverse rupture strength(TRS)and the hardness.Meanwhile,the deflection and bridging of cracks keep the fracture toughness at a respectable level.The WC-10Co-0.6(Cr_(0.9),V_(0.1))_(2)(C,N)-0.025(V_(0.9),Cr_(0.1))_(2)(C,N)cemented carbides exhibit excellent comprehensive mechanical properties with the TRS of 4602.6 MPa,hardness of 1835 kg/mm^(2),and fracture toughness of 10.39 MPa·m^(1/2),respectively.However,the large pores are caused by excess N larger than 0.03 wt%and deteriorates the mechanical properties.We provide a new approach to WC-Co cemented carbides preparation with a narrow grain size distribution by adding novel grain growth inhibitors.
基金Project(U1460204) supported by the Joint Funds of The Iron and Steel Key Project,ChinaProject(2015020180) supported by the Natural Science Foundation of Liaoning Province,ChinaProject(N140704002) supported by the Fundamental Research Funds for the Central Universities,China
文摘Precipitation behavior of Ti in high strength steels was investigated by means of the equilibrium solid solubility theory. The contributions of Ti content to yield strength were calculated. The calculated results were verified by the hot rolling experiment for C–Mn steel and C–Mn–Ti micro alloyed steel, respectively. The research results show that the precipitates are mainly Ti N at the higher temperature. With the decreasing temperature, the proportion of Ti C in precipitates increases gradually. When the temperature drops to 800 °C, Ti C will become predominant for the precipitation of Ti. When Ti content is less than 0.014%(mass fraction), Ti has little influence on the yield strength. When Ti content is in the range of 0.014%–0.03%(mass fraction), the yield strength of Ti micro alloyed steel is greatly increased, which leads to instability of the mechanical properties of the steel. Therefore, the design of Ti content in high strength steels should avoid this Ti content range. When Ti content is higher than 0.03%, the yield strength increases stably. In this experiment, when added Ti content was controlled in the range of 0.03%–0.05%, the contribution to the yield strength of Ti micro alloyed steel can reach about 92.44 MPa.
基金Funded by the National Natural Science Foundation of China (50775102)the Universities Natural Science Fund Key Project of Jiangsu Province (04KJA430021)
文摘The precipitation behavior of V（C, N） in steels microalloyed with vanadium was researched using a thermal simulator during single-pass deformation at 800-750 ℃. The V（C, N） precipitates and its nucleation effect on ferrite were investigated by TEM and EDS. The experimental results show that there are two remarkable heterogeneous nucleation effects of V（C, N） particles precipitated before γ →/ α phase change： primary reason is that high coherency between V（C, N） and ferrite promotes V（C, N） to become a nucleating center of intragranular ferrite; secondary reason is that the coarsening of V（C, N） causes locally solute-poor region in austenite, thus expedites the nucleation of intragranular ferrites further. Furthermore, the relationship between the size and shape of V（C, N） was studied, and identification method was provided for distinguishing interphase precipitation and general precipitation to avoid erroneous judgment and misguide.
基金supported by the National Natural Science Foundation of China(No.51504172)and(No.51474163)China Postdoctoral Science Foundation(No.2015M572212)
文摘Austenite grain size is an important influence factor for ductility of steel at high temperatures during continuous casting. Thermodynamic and kinetics calculations were performed to analyze the characteristics of Ti(C,N) precipitates formed during the continuous casting of micro-alloyed steel. Based on Andersen-Grong equation, a coupling model of second phase precipitation and austenite grain growth has been established, and the influence of second precipitates on austenite grain growth under different cooling rates is discussed. Calculations show that the final sizes of austenite grains are 2.155, 1.244, 0.965, 0.847 and 0.686 mm, respectively, under the cooling rate of 1, 3, 5, 7, and 10 ℃·s^(-1), when ignoring the pinning effect of precipitation on austenite growth. Whereas, if taking the pinning effect into consideration, the grain growth remains stable from 1,350 ℃, the calculated final sizes of austenite grains are 1.46, 1.02, 0.80, 0.67 and 0.57 mm, respectively. The sizes of final Ti(C,N) precipitates are 137, 79, 61, 51 and 43 nm, respectively, with the increase of cooling rate from 1 to 10 ℃·s^(-1). Model validation shows that the austenite size under different cooling rates coincided with the calculation results. Finally, the corresponding measures to strengthen cooling intensity at elevated temperature are proposed to improve the ductility and transverse crack of slab.
文摘The precipitation of Ti(V)N(C)in high-carbon steel PD_3 during thermomechanicol treatment at austenitic temperatures after deformation has been observed.The average size of Ti(V)N(C)particles may reduce with the increase of strain and the decrease of thermomechanical treatment temperature,and vise versa.The growth of Ti(V)N(C)particles at 920°C is found to be controlled by the interface reaction between precipitated particles and matrix.
基金from National Natural Science Foundation of China(Grant Nos:41773075,41575137,31370494,31170421).
文摘Background:The nitrogen isotope natural abundance(δ^(15)N)provides integrated information on ecosystem N dynamics,and carbon isotope natural abundance(δ^(13)C)has been used to infer how water-using processes of plants change in terrestrial ecosystems.However,howδ^(13)C andδ^(15)N abundances in plant life and soils respond to N addition and water availability change is still unclear.Thus,δ^(13)C andδ^(15)N abundances in plant life and soils were used to investigate the effects of long-time(10 years)N addition(+50 kg N·ha^(−1)·yr^(−1)and precipitation reduction(−30%of throughfall)in forest C and N cycling traits in a temperate forest in northern China.Results:We analyzed theδ^(13)C andδ^(15)N values of dominant plant foliage,litterfall,fungal sporophores,roots,and soils in the study.The results showed thatδ^(15)N values of foliage,litterfall,and surface soil layer’s(0–10 cm)total N were significantly increased by N addition,whileδ^(15)N values of fine roots and coarse roots were considerably decreased.Nitrogen addition also significantly increased theδ^(13)C value of fine roots and total N concentration of the surface soil layer compared with the control.The C concentration,δ^(13)C,andδ^(15)N values of foliage andδ^(15)N values of fine roots were significantly increased by precipitation reduction,while N concentration of foliage and litterfall significantly decreased.The combined effects of N addition and precipitation reduction significantly increased theδ^(13)C andδ^(15)N values of foliage as well as theδ^(15)N values of fine roots andδ^(13)C values of litterfall.Furthermore,foliarδ^(15)N values were significantly correlated with foliageδ^(13)C values,surface soilδ^(15)N values,surface soil C concentration,and N concentrations.Nitrogen concentrations andδ^(13)C values of foliage were significantly correlated withδ^(15)N values and N concentrations of fine roots.Conclusions:This indicates that plants increasingly take up the heavier 15N under N addition and the heavier 13C and 15N under precipitation reduction,suggesting that N addition and precipitation reduction may lead to more open forest ecosystem C and N cycling and affect plant nutrient acquisition strategies.
