MRSA is able to generate a modified variety of penicillin binding protein named as PBP2a instead of PBP which makes it resistant against penicillin and methicillin. Production of PBP2a is due to the presence of a gene...MRSA is able to generate a modified variety of penicillin binding protein named as PBP2a instead of PBP which makes it resistant against penicillin and methicillin. Production of PBP2a is due to the presence of a gene on Staphylococcal cassette chromosome or SCC termed as “mec-A gene”. SCC is a mobile genetic element carrying many resistance genes. It is because of current antibiotic selection pressure that by now there are eight types (I - VIII) of SCCmec. This research has been designed to determine frequency of SCCmec type IV and V in clinical isolates of MRSA. A total of 70 presumptive MRSA isolates collected from a tertiary care hospital of Lahore were cultured on blood agar, incubated overnight at 37°C aerobically. Next day, they were examined for cultural characteristics, colonial morphology, gram stain, and biochemical profile. Confirmation of MRSA was done by phenotypic disk diffusion method according to (CLSI) 2013 guidelines. mecA gene was also detected at molecular level. Molecular identification of SCCmec type IV and V was done by Nested PCR strategy. A total of 50 isolates were confirmed to be MRSA Molecular detection of SCCmec type IV and V revealed that 11 isolates (22%) possess SCCmec type IV and only 2 isolate (4%) carries SCCmec type V. It is obvious from results that SCCmec type IV and V are present in our population too. Larger study (with larger sample size) might be undertaken to find out actual emergence of SCCmec type IV and V in our population.展开更多
IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or down...IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or downward tailoring on its interpretation for practical IV & V. It contains crucial and encompassing check points and guidelines to analyze the design integrity, without addressing the formalized and the specific criteria for IV & V activities confirming the technical integrity. It is necessary to list up the inspection viewpoint via interpretation of the standard that is practical review points checking design consistency. For fruitful IV & V of Control Element Driving Mechanism Control System (CEDMCS) software for Yonggwang Nuclear Power Plant unit 3 & 4, the specific viewpoints and approach are necessary based on the guidelines of IEEE 1012 to enhance the system quality by considering the level of implementation of the theoretical and the practical IV & V. Additionally IV & V guideline of IEEE 1012 does not specifically provide the concrete measure considering the system characteristics of CEDMCS. This paper provides the seven (7) characteristic criteria for CEDMCS IV & V, and by applying these viewpoints, the design analysis such as function, performance, interface and exception, backward and forward requirement traceability analysis has been conducted. The requirement, design, implementation, and test phase were only considered for IV & V in this project. This article also provides the translation of code to map theoretical verification and validation into practical verification and validation. This paper emphasizes the necessity of the intensive design inspection and walkthrough for requirement phase to resolve the design faults because the IV & V of early phase of SDLC obviously contributes to find out most of critical design inconsistency. Especially for test phase IV & V, it is strongly recommended to prepare the test plan document which is going to be the basis for the test coverage selection and test strategy. This test plan document should be based on the critical characteristics of function and performance of CEDMCS. Also to guarantee the independency of V & V organization participating in this project, and to acquire the full package of design details for IV & V, the systematic approach and efforts with an aspect of management is highlighted among the participants.展开更多
Because of graphene and phosphorene, two-dimensional （2D） layered materials of group IV and group V elements arouse great interest. However, group IV-V monolayers have not received due attention. In this work, three...Because of graphene and phosphorene, two-dimensional （2D） layered materials of group IV and group V elements arouse great interest. However, group IV-V monolayers have not received due attention. In this work, three types of SiP monolayers were computationally designed to explore their electronic structure and optical properties. Computations confirm the stability of these monolayers, which are all indirect-bandgap semiconductors with bandgaps in the range 1.38-2.21 eV. The bandgaps straddle the redox potentials of water at pH = 0, indicating the potential of the monolayers for use as water- splitting photocatalysts. The computed optical properties demonstrate that certain monolayers of SiP 2D materials axe absorbers of visible light and would serve as good candidates for optoelectronic devices.展开更多
文摘MRSA is able to generate a modified variety of penicillin binding protein named as PBP2a instead of PBP which makes it resistant against penicillin and methicillin. Production of PBP2a is due to the presence of a gene on Staphylococcal cassette chromosome or SCC termed as “mec-A gene”. SCC is a mobile genetic element carrying many resistance genes. It is because of current antibiotic selection pressure that by now there are eight types (I - VIII) of SCCmec. This research has been designed to determine frequency of SCCmec type IV and V in clinical isolates of MRSA. A total of 70 presumptive MRSA isolates collected from a tertiary care hospital of Lahore were cultured on blood agar, incubated overnight at 37°C aerobically. Next day, they were examined for cultural characteristics, colonial morphology, gram stain, and biochemical profile. Confirmation of MRSA was done by phenotypic disk diffusion method according to (CLSI) 2013 guidelines. mecA gene was also detected at molecular level. Molecular identification of SCCmec type IV and V was done by Nested PCR strategy. A total of 50 isolates were confirmed to be MRSA Molecular detection of SCCmec type IV and V revealed that 11 isolates (22%) possess SCCmec type IV and only 2 isolate (4%) carries SCCmec type V. It is obvious from results that SCCmec type IV and V are present in our population too. Larger study (with larger sample size) might be undertaken to find out actual emergence of SCCmec type IV and V in our population.
文摘IEEE 1012 [1] describes the SDLC phase activities for software independent verification and validation (IV & V) for nuclear power plant in truly general and conceptual manner, which requires the upward and/or downward tailoring on its interpretation for practical IV & V. It contains crucial and encompassing check points and guidelines to analyze the design integrity, without addressing the formalized and the specific criteria for IV & V activities confirming the technical integrity. It is necessary to list up the inspection viewpoint via interpretation of the standard that is practical review points checking design consistency. For fruitful IV & V of Control Element Driving Mechanism Control System (CEDMCS) software for Yonggwang Nuclear Power Plant unit 3 & 4, the specific viewpoints and approach are necessary based on the guidelines of IEEE 1012 to enhance the system quality by considering the level of implementation of the theoretical and the practical IV & V. Additionally IV & V guideline of IEEE 1012 does not specifically provide the concrete measure considering the system characteristics of CEDMCS. This paper provides the seven (7) characteristic criteria for CEDMCS IV & V, and by applying these viewpoints, the design analysis such as function, performance, interface and exception, backward and forward requirement traceability analysis has been conducted. The requirement, design, implementation, and test phase were only considered for IV & V in this project. This article also provides the translation of code to map theoretical verification and validation into practical verification and validation. This paper emphasizes the necessity of the intensive design inspection and walkthrough for requirement phase to resolve the design faults because the IV & V of early phase of SDLC obviously contributes to find out most of critical design inconsistency. Especially for test phase IV & V, it is strongly recommended to prepare the test plan document which is going to be the basis for the test coverage selection and test strategy. This test plan document should be based on the critical characteristics of function and performance of CEDMCS. Also to guarantee the independency of V & V organization participating in this project, and to acquire the full package of design details for IV & V, the systematic approach and efforts with an aspect of management is highlighted among the participants.
基金This work was supported by the National Science Foundation of China （Grant No. 21503195）, Natural Science Foundation of Shanxi Province （2015021044）, and Open Research Fund of Key Laboratory of Advanced Energy Materials Chemistry （Ministry of Education）, Nankai University in China.
文摘Because of graphene and phosphorene, two-dimensional （2D） layered materials of group IV and group V elements arouse great interest. However, group IV-V monolayers have not received due attention. In this work, three types of SiP monolayers were computationally designed to explore their electronic structure and optical properties. Computations confirm the stability of these monolayers, which are all indirect-bandgap semiconductors with bandgaps in the range 1.38-2.21 eV. The bandgaps straddle the redox potentials of water at pH = 0, indicating the potential of the monolayers for use as water- splitting photocatalysts. The computed optical properties demonstrate that certain monolayers of SiP 2D materials axe absorbers of visible light and would serve as good candidates for optoelectronic devices.
