期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
溶胶凝胶法制备(Y,Gd)(V,P)O_4∶Eu^(3+)纳米红色荧光粉 被引量:3
1
作者 董其铮 何玲 孙卫民 《兰州理工大学学报》 CAS 北大核心 2016年第1期31-34,共4页
使用溶胶凝胶法将Gd^(3+)和P^(5+)掺杂到纳米YVO4∶Eu^(3+)体系中,得到纳米红色荧光粉(Y,Gd)(V,P)O_4∶Eu^(3+).通过X射线衍射,透射电镜和扫描电镜测试表明,样品的结晶度较好,具有球形形貌并有较好的分散性,其颗粒尺寸约为40nm.通过对... 使用溶胶凝胶法将Gd^(3+)和P^(5+)掺杂到纳米YVO4∶Eu^(3+)体系中,得到纳米红色荧光粉(Y,Gd)(V,P)O_4∶Eu^(3+).通过X射线衍射,透射电镜和扫描电镜测试表明,样品的结晶度较好,具有球形形貌并有较好的分散性,其颗粒尺寸约为40nm.通过对系列样品激发光谱的对比研究发现,掺入Gd^(3+)和P^(5+)后,样品在真空紫外区域内基质吸收的强度明显增加,对应在发射光谱中Eu^(3+)在619nm处的红光发射强度也明显增强,其中Eu^(3+)的5 D0-7 F2红光发射强度相当于商用红粉KX-504的109.7%,并且其色坐标比商用粉更加接近标准红色值,说明其色纯度更好. 展开更多
关键词 纳米荧光粉 (Y Gd)(v P)o4eu3+ 溶胶凝胶法
下载PDF
稀土发光材料Ca_3((P,V)O_4)_2:Eu^(3+)的合成和性质 被引量:1
2
作者 周小春 钟路平 +1 位作者 刘秋平 陈红梅 《材料导报(纳米与新材料专辑)》 EI 2008年第3期248-250,共3页
采用燃烧法合成了系列稀土Ca_3((P,V)O_4)_2:Eu^(3+)发光材料,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光分光光度计等对合成产物进行了分析和表征。结果表明,合成的Ca_3((P,V)O_4)_2:Eu^(3+)荧光粉的颗粒很特殊,呈现长2.5μm、宽1μm... 采用燃烧法合成了系列稀土Ca_3((P,V)O_4)_2:Eu^(3+)发光材料,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光分光光度计等对合成产物进行了分析和表征。结果表明,合成的Ca_3((P,V)O_4)_2:Eu^(3+)荧光粉的颗粒很特殊,呈现长2.5μm、宽1μm的方形,在274nm近紫外光激发下,特别显示发射主峰位于616.0nm的宽峰,是一种良好的红色荧光粉。 展开更多
关键词 燃烧法 Ca3((P v)o4)2:eu3+ 荧光体 方块形
下载PDF
Y(P,V)O_4∶Eu^(3+)荧光粉的制备及发光特性
3
作者 宁青菊 乔畅君 李向龙 《陕西科技大学学报(自然科学版)》 2013年第6期58-61,共4页
采用水热辅助溶胶-凝胶法在较低温度下合成了Y(P,V)O4∶Eu3+荧光粉。通过综合热分析、X射线衍射(XRD)、扫描电镜(SEM)、能谱分析(EDS)和光谱分析等手段对试样进行表征.结果表明:对前驱体进行水热处理能使YPO4∶Eu3+和YVO4∶Eu3+更好地固... 采用水热辅助溶胶-凝胶法在较低温度下合成了Y(P,V)O4∶Eu3+荧光粉。通过综合热分析、X射线衍射(XRD)、扫描电镜(SEM)、能谱分析(EDS)和光谱分析等手段对试样进行表征.结果表明:对前驱体进行水热处理能使YPO4∶Eu3+和YVO4∶Eu3+更好地固溶,提高了其结晶性能和发光性能.制备的样品呈分散性好的球形颗粒,粒度分布均匀,平均粒径为1μm.对前驱体的水热处理提高了Y(P,V)O4∶Eu3+荧光粉的发光性能. 展开更多
关键词 溶胶-凝胶法 Y(P v)o4 eu3+ 前驱物 荧光粉
下载PDF
Synthesis and Luminescence Properties of(Y, Gd)(P, V)O_4:Eu^(3+), Bi^(3+) Red Nano-phosphors with Enhanced Photoluminescence by Bi^(3+), Gd^(3+) Doping 被引量:1
4
作者 Yong Pu Ke Tang +3 位作者 Da-Chuan Zhu Tao Han Cong Zhao Ling-Ling Peng 《Nano-Micro Letters》 SCIE EI CAS 2013年第2期117-123,共7页
A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were i... A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were investigated. It was found that the sintered samples crystallized in a tetragonal crystal system with space group I_(41)/amd(a = b = 0.7119 nm, c = 0.6290 nm). The products presented rod-like morphology with length of 100-150 nm and width of 50-100 nm. A maximum peak at 619 nm(~5D_0 →~7F_2) was observed in emission spectrum of the phosphors. It was also found that co-doping of Bi^(3+)+, P5+and Gd^(3+)ions into YVO_4:Eu^(3+)can not only made the right edge of the excitation band shift to the long-wavelength region, but also increased the emission intensity at 619 nm sharply and decreased the lifetime of fluorescence decay. These results may expand the application scope of the phosphors. 展开更多
关键词 (Y Gd)(P v)o4:eu3+ Bi3+ Rod-like Red phosphors PHOTOLUMINESCENCE DOPING
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部