The behavior of transversal cracks on the surface of the slab corner during vertical and horizontal (V-H) rolling process with flat vertical roll and groove vertical roll was simulated by explicit dynamic finite ele...The behavior of transversal cracks on the surface of the slab corner during vertical and horizontal (V-H) rolling process with flat vertical roll and groove vertical roll was simulated by explicit dynamic finite element method. The closure and growth of crack and the contact pressure on surfaces of the crack in contacting zone between slab and roll during rolling process were analyzed. The results showed that during vertical rolling process, when the groove vertical roll is used, the maximum contact pressure on surfaces of the crack is 115 MPa, and the closure of crack is stable when the flat vertical roll is used, the maximum contact pressure on surfaces of the crack is 70 MPa, and it fluctuates greatly. During horizontal rolling process, when groove vertical roll is used, the contact pressure becomes zero which may accelerate the growth of crack when flat vertical roll is used, there is still contact pressure. The cal culated results are in good agreement with the results of test.展开更多
Multi-pass slab vertical-horizontal (V-H) rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic s...Multi-pass slab vertical-horizontal (V-H) rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic strain contour in slab daring rolling process with different edging roll and under different rolling stage have been obtained. The results show that there exist two thin strain assembling zones in slab when the flat edging roll is used, and there just exist one strain assembling zone in slab when the edging roll with groove is used. And compared the deformation equality between flat edging roll and edging roll with groove, the lateris better than the former, which supplies the theory prove to the slab deformation distribution during V-H rolling process and is helpful for predicting the slab texture.展开更多
在城市中应用微动H/V谱比方法面对大量且复杂的人文噪声干扰,需要对噪声强度较大的微动数据进行去噪处理或信号分析。本文针对现有方法难以处理干扰较大的微动数据以及信号提取过程繁琐的问题,提出基于XGBoost(extreme gradient boosti...在城市中应用微动H/V谱比方法面对大量且复杂的人文噪声干扰,需要对噪声强度较大的微动数据进行去噪处理或信号分析。本文针对现有方法难以处理干扰较大的微动数据以及信号提取过程繁琐的问题,提出基于XGBoost(extreme gradient boosting)的多重加权谱比降噪方法。首先对采集的微动数据进行幅值和频率分析,建立幅值加权谱比、频率加权谱比和多重加权谱比;然后根据建立的多重加权谱比,通过XGBoost方法获得降噪后的谱比曲线。将本文方法与传统STA/LTA(short time average/long time average)方法进行实际高噪声数据对比分析,结果表明相比于STA/LTA方法,本文方法对高噪声数据提取效果更好。展开更多
基金ItemSponsored by State Ministry of Science and Technology of China (G2000067208-4)
文摘The behavior of transversal cracks on the surface of the slab corner during vertical and horizontal (V-H) rolling process with flat vertical roll and groove vertical roll was simulated by explicit dynamic finite element method. The closure and growth of crack and the contact pressure on surfaces of the crack in contacting zone between slab and roll during rolling process were analyzed. The results showed that during vertical rolling process, when the groove vertical roll is used, the maximum contact pressure on surfaces of the crack is 115 MPa, and the closure of crack is stable when the flat vertical roll is used, the maximum contact pressure on surfaces of the crack is 70 MPa, and it fluctuates greatly. During horizontal rolling process, when groove vertical roll is used, the contact pressure becomes zero which may accelerate the growth of crack when flat vertical roll is used, there is still contact pressure. The cal culated results are in good agreement with the results of test.
文摘Multi-pass slab vertical-horizontal (V-H) rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic strain contour in slab daring rolling process with different edging roll and under different rolling stage have been obtained. The results show that there exist two thin strain assembling zones in slab when the flat edging roll is used, and there just exist one strain assembling zone in slab when the edging roll with groove is used. And compared the deformation equality between flat edging roll and edging roll with groove, the lateris better than the former, which supplies the theory prove to the slab deformation distribution during V-H rolling process and is helpful for predicting the slab texture.
文摘在城市中应用微动H/V谱比方法面对大量且复杂的人文噪声干扰,需要对噪声强度较大的微动数据进行去噪处理或信号分析。本文针对现有方法难以处理干扰较大的微动数据以及信号提取过程繁琐的问题,提出基于XGBoost(extreme gradient boosting)的多重加权谱比降噪方法。首先对采集的微动数据进行幅值和频率分析,建立幅值加权谱比、频率加权谱比和多重加权谱比;然后根据建立的多重加权谱比,通过XGBoost方法获得降噪后的谱比曲线。将本文方法与传统STA/LTA(short time average/long time average)方法进行实际高噪声数据对比分析,结果表明相比于STA/LTA方法,本文方法对高噪声数据提取效果更好。