Laser ablation–inductively coupled plasma–mass spectrometry(LA–ICP–MS) was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe(–Cu) deposits ...Laser ablation–inductively coupled plasma–mass spectrometry(LA–ICP–MS) was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe(–Cu) deposits in the Eastern Tianshan Orogenic Belt. The magnetite from these deposits typically contains detectable Mg, Al, Ti, V, Cr, Mn, Co, Ni, Zn and Ga. The trace element contents in magnetite generally vary less than one order of magnitude. The subtle variations of trace element concentrations within a magnetite grain and between the magnetite grains in the same sample probably indicate local inhomogeneity of ore–forming fluids. The variations of Co in magnetite between samples are probably due to the mineral proportion of magnetite and pyrite. Factor analysis has discriminated three types of magnetite: Ni–Mn–V–Ti(Factor 1), Mg–Al–Zn(Factor 2), and Ga– Co(Factor 3) magnetite. Magnetite from the Heifengshan and Shuangfengshan Fe deposits has similar normalized trace element spider patterns and cannot be discriminated according to these factors. However, magnetite from the Shaquanzi Fe–Cu deposit has affinity to Factor 2 with lower Mg and Al but higher Zn concentrations, indicating that the ore–forming fluids responsible for the Fe–Cu deposit are different from those for Fe deposits. Chemical composition of magnetite indicates that magnetite from these Fe(–Cu) deposits was formed by hydrothermal processes rather than magmatic differentiation. The formation of these Fe(–Cu) deposits may be related to felsic magmatism.展开更多
Peculiar and rare occurrences of serpentinite-hosted magnetite deposits with mineable sizes are found in the Mesozoic ophiolites of Greece(Skyros), Iran(Nain and Sabzevar) and Oman(Aniba). These deposits have diverse ...Peculiar and rare occurrences of serpentinite-hosted magnetite deposits with mineable sizes are found in the Mesozoic ophiolites of Greece(Skyros), Iran(Nain and Sabzevar) and Oman(Aniba). These deposits have diverse thickness(from a few centimeters up to 50 m) and length(2 to >500 m). Magnetite ores show variable textures, including massive, nodular and banded ores, veins, net and fine-grained disseminations in serpentinites. Intriguingly, the investigated magnetite deposits can be mistaken for chromitite pods. Serpentinite-hosted magnetite deposits show three modes of occurrences including:(i) boulders strewn across the serpentinites(i.e. Skyros Island);(ii) ore bodies along the nonconformity contacts between serpentinites and limestones(i.e. Aniba);(iii) irregular and discontinuous trails of massive and semi-massive ore bodies within highly sheared serpentinite masses(i.e. Nain;Sabzevar). In all of these magnetite ore bodies, relicts of chromian spinel grains are occasionally enclosed in magnetite crystals. The chemistry of Cr-spinel relics found in these magnetite bodies are comparable to those of accessory Crspinels in the surrounding serpentinized peridotites. BSE images and elemental mapping revealed that magnetite occurs as a nucleation on chromian spinels but not being involved in reaction either with chromite or ferritchromite. Low-grade metamorphic transformation of chromite into Fe-chromite is documented along the cracks and fractures of a few chromite grains. Generally, magnetite has typical hydrothermal compositions, characterized by low Cr, V and Ti and high Mg and Mn. It is crucial to note that a few magnetite grains with metamorphic origin are characterized by high Cr and low Ti and Ni. The potential source of iron is essentially the Fe-rich olivine. We believe that multi-episodic serpentinization of peridotite systems at high fluid-rock ratios is the main process responsible for precipitation of magnetite at ore levels whereas low-grade metamorphic transformation of chromite to magnetite has minor contribution. Cumulative factors in generation of these deposits are modal volume of mantle olivine, peridotite composition, fluid chemistry, fluid-rock ratio, mechanisms of transportation and precipitation, structural controls such as cracks and shear zones.展开更多
A novel method of pellet calcification roasting-H_(2)SO_(4) leaching was proposed to efficiently separate and extract vanadium(V)from vanadium-titanium(V-Ti)magnetite concentrates.The leaching rate of V is as high as ...A novel method of pellet calcification roasting-H_(2)SO_(4) leaching was proposed to efficiently separate and extract vanadium(V)from vanadium-titanium(V-Ti)magnetite concentrates.The leaching rate of V is as high as 88.98%,while the leaching rate of impurity iron is only 1.79%.Moreover,the leached pellets can be used as raw materials for blast furnace ironmaking after secondary roasting.X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy with energy dispersive X-ray spectrometry(SEMEDS)analyses showed that V^(3+)was oxidized to V^(5+)after roasting at 1200℃,and V^(5+)was then leached by H_(2)SO_(4).X-ray diffraction(XRD)analyses and single factor experiment revealed a minimal amount of dissolved Fe_(2)O_(3) during H_(2)SO_(4) leaching.Therefore,a high separation degree of V and iron(Fe)from V-Ti magnetite concentrate was achieved through H_(2)SO_(4) leaching.Compared with the traditional roastingleaching process,this process can achieve a high selectivity of V and Fe,and has excellent prospects for industrial production.展开更多
The Pingchuan iron deposit, located in the Yanyuan region of Sichuan Province, SW China, has an ore reserve of 40 Mt with ~60 wt% Fe. Its genesis is still poorly understood. The Pingchuan iron deposit has a parageneti...The Pingchuan iron deposit, located in the Yanyuan region of Sichuan Province, SW China, has an ore reserve of 40 Mt with ~60 wt% Fe. Its genesis is still poorly understood. The Pingchuan iron deposit has a paragenetic sequence of an early Fe-oxide–Pyrite stage(Ⅰ) and a late Fe-oxide–pyrrhotite stage(Ⅱ). Stage Ⅰ magnetite grains are generally fragmented, euhedral–subhedral, largesized crystals accompanying with slightly postdated pyrite.Stage Ⅱ magnetite grains are mostly unfragmented, anhedral, relatively small-sized grains that co-exist with pyrrhotite. Combined with micro-textural features and previously-obtained geochronological data, we consider that these two stages of iron mineralization in the Pingchuan deposit correspond to the Permian ELIP magmatism and Cenozoic fault activity event. Both the Stage Ⅰ and Ⅱ magnetites are characterized with overall lower contents of trace elements(including Cr, Ti, V, and Ni) than the ELIP magmatic magnetite, which suggests a hydrothermal origin for them. ‘‘Skarn-like'' enrichment in Sn, Mn, and Zn in the Stage Ⅰ magnetite grains indicate significant material contributions from carbonate wall-rocks due to water–rock interaction in ore-forming processes. Stage Ⅱ magnetite grains contain higher Mn concentrations than Stage Ⅰ magnetite grains, which possibly implies more contribution from carbonate rocks. In multiple-element diagrams, the Stage Ⅰ magnetite shows systematic similarities to Kiruna-type magnetite rather than those from other types of deposits. Combined with geological features and previous studies on oxygen isotopes, we conclude that hydrothermal fluids have played a key role in the generation of the Pingchuan low-Ti iron deposit.展开更多
The Yamansu iron deposit is hosted in submarine volcanic rocks in the Aqishan–Yamansu belt of Eastern Tianshan,NW China.A geological cross-section for the Carboniferous strata in the ore district shows that ore bodie...The Yamansu iron deposit is hosted in submarine volcanic rocks in the Aqishan–Yamansu belt of Eastern Tianshan,NW China.A geological cross-section for the Carboniferous strata in the ore district shows that ore bodies in the Yamansu deposit are hosted in andesitic crystal tuff of the third cycle of the Carboniferous Yamansu Formation.This indicates an association between mineralization and volcanism.The orebodies are strata bound and lensoid and generally share the occurrence state of the host rocks.Magnetite mineralization mainly occurs asbreccia ores,ores in the mineralized volcanic rocks,massive ores,and sulfide-rich ores according to their structures and sequences of formation.Trace element compositions of magnetite from various types of ores were determined by LA-ICP-MS.The dataset indicates thatdifferent types of magnetite havedistinct trace element contents correlated to their formation environments.Magnetite crystals from breccia ores have high Ti,Ni,V,Cr,and Co and low Si,Al,Ca,and Mg contents,indicating crystallization from a volcanic magmatic eruption,which is consistent with field evidence of coexisting altered volcanic breccia.Magnetite crystals from ores in the mineralized volcanic rocks have moderate Ti,Ni,V,Cr,and Co contents.In contrast,magnetite from massive ores and sulfide-rich ores have low concentrations of Ti,Cr,Ni,and V,high concentrations of Si,Al,Ca,and Mg,and evidence of hydrothermal magnetite.In-situ magnetite compositions imply a magmatic-hydrothermal process.Although d18 O values for magnetite grains from Yamansu vary(?1.3 to?7.0%),they all plot in the range field of volcanic iron deposits,and they also record a magmatic-hydrothermal process.The compositions of Yamansu magnetites are interpreted as controlled mainly by temperature,fluid,host rock buffering,oxygen fugacity,and sulfur fugacity.The metallogenic conditions of the Yamansu deposit changed from high temperature and low oxygen fugacity to low temperature and high oxygen fugacity.However,more fluid-rock reactions and higher sulfur fugacity were involved during the deposition of massive ores and sulfiderich ores.展开更多
The Shaytor apatite-rich iron deposit is located in the Kashmar-Kerman tectonic zone in the central of the Iranian plat, which is an important polymetallic belt in Iran. The ore bodies are interbedded with the upper i...The Shaytor apatite-rich iron deposit is located in the Kashmar-Kerman tectonic zone in the central of the Iranian plat, which is an important polymetallic belt in Iran. The ore bodies are interbedded with the upper inferacaamberian calc-alkaline igneous rocks that show well-preserved porphyritic and volcaniclastic textures. The iron ores have massive, disseminated, and brecciated structures. Magnetite from the Shaytor deposit is low in Ti (TiO<sub>2</sub> = up to 0.70 wt.%) and different ore types show similar rare earth element (REE) and trace element-normalized patterns with weak-to-moderate enrichment in light REE and negative Eu anomalies, indicating a common source and genesis. The similar REE patterns for the magnetite and volcanic basaltic host rocks suggest their close genetic linkage and support a magmatic origin for the deposit. The Shaytor deposit shows the typical characteristics of Kiruna-type deposits with regard to the mineral assemblages, ore texture and structure, and the apatite and magnetite geochemistry. We propose that the Kiruna-type Shaytor apatite-rich iron deposit was derived from Fe-P-rich melt through liquid immiscibility and the activity of hydrothermal fluids.展开更多
Magnetite is a very common mineral in various types of iron deposits and some sulfide deposits. Recent studies have focused on the use of trace elements in magnetite to discriminate ore types or trace ore-forming proc...Magnetite is a very common mineral in various types of iron deposits and some sulfide deposits. Recent studies have focused on the use of trace elements in magnetite to discriminate ore types or trace ore-forming process. Germanium is a disperse element in the crust, but sometimes is not rare in magnetite. Germanium in magnetite can be determined by laser ablation ICP-MS due to its low detection limit(0.0X ppm). In this study, we summary the Ge data of magnetite from magmatic deposits, iron formations, skarn deposits, iron oxide copper-gold deposits, and igneous derived hydrothermal deposits. Magnetite from iron formations contains relatively high Ge(up to ~250 ppm), whereas those from all other deposits mostly contains Ge less than 10 ppm, indicating that iron formations can be discriminated from other Fe deposits by Ge contents. Germanium in magmatic/hydrothermal magnetite is controlled by a few factors. Primary magma/fluid composition may be the major control of Ge in magnetite. Higher oxygen fugacity may be beneficial to Ge partition into magnetite. Sulfur fugacity and temperature may have little effect on Ge in magnetite. The enrichment mechanism of Ge in magnetite from iron formations remains unknown due to the complex ore genesis. Germanium along with other elements(Mn, Ni, Ga) and element ratios(Ge/Ga and Ge/Si raios) can distinguish different types of deposits, indicating that Ge can be used as a discriminate factor like Ti and V. Because of the availability of in situ analytical technique like laser ablation ICP-MS, in situ Ge/Si ratio of magnetite can serve as a geochemical tracer and may provide new constraints on the genesis of banded iron formations.展开更多
Qara-aghaj and Skandian as hard rock titanium deposit and Kahnooj one as a placer deposit were investigated from applied mineralogical point of view. The mineralogical studies were carried out using XRD, XRF, optical ...Qara-aghaj and Skandian as hard rock titanium deposit and Kahnooj one as a placer deposit were investigated from applied mineralogical point of view. The mineralogical studies were carried out using XRD, XRF, optical microscopy, scanning electron microscopy and microprobe analysis. These studies indicated that ilmenite and magnetite are main valuable minerals in the studied ores. Pyroxene, olivine and plagioclase are the main gangue minerals in Qara-aghaj ore while chlorite and plagioclase are the major gangue minerals in Skandian ore. Plagioclase, clinopyroxene, amphibole, feldspate and some quartz are the important gangue minerals in kahnooj deposit. In all three ores ilmenite is mainly in the form of ilmenite grains but some lamellae of ilmenite with thickness between 0.1 to 20 μm have been occurred as exsolution textures inside magnetite grains, where the magnetite here can be referred to as ilmenomagnetite. In the hard rock ores some fine ilmenites have been disseminated in silicate minerals. The liberation degree of granular ilmenite was determined 150, 140 and 200 μm for Qara-aghaj, Skandian and Kahnooj, respectively. So, only the granular form of ilmenite is recoverable by physical methods. Some sphene and rutile as titanium containing minerals were observed mainly inside ilmenite phase in kahnooj ore. Some fine rutile was also found inside Skandian ilmenite while there were not any other titanium minerals inside Qara-aghaj ilmenite. Apatite is another valuable mineral which was found only in Qara-aghaj ore. Using SEM and microprobe analysis it was found that there are different amounts of exsolved fine lamellae of hematite inside ilmenite in Qara-aghaj and Kahnooj ores while it was not observed in Sckandian one. The average contents of TiO2 in the lattice of Qara-aghaj, Skandian and Kahnooj ilmenite were determined 51.13, 50.9% and 52.02%, respectively. FeO content of ilmenite lattice for all three samples is clearly lower than the theoretical content. This is due to the substitution of Mg and Mn for some Fe2+ ions in the ilmenite lattice. V2O3 content of magnetite lattice is up to 1%. So, magnetite can be a suitable source for production of vanadium as a by-product in all three deposits.展开更多
In-situ hydrothermal experiments using diamond-anvil cell show that sulfate and sulfi de are the dominant sulfur species under P-T conditions similar to those of porphyry magmas.No sulfi te was identifi ed using in-si...In-situ hydrothermal experiments using diamond-anvil cell show that sulfate and sulfi de are the dominant sulfur species under P-T conditions similar to those of porphyry magmas.No sulfi te was identifi ed using in-situ Raman spectrometer.This supports that porphyry copper mineralization is controlled by sulfate reduction,rather than sulfi te disproportionation.展开更多
The Aqishan-Yamansu metallogenic belt(AYMB)in East Tianshan hosts abundant sub-marine volcanic-hosted iron deposits.Although there is agreement with the magmatic source of the ore-forming materials and the role of hyd...The Aqishan-Yamansu metallogenic belt(AYMB)in East Tianshan hosts abundant sub-marine volcanic-hosted iron deposits.Although there is agreement with the magmatic source of the ore-forming materials and the role of hydrothermal replacement in iron ore formation,the mineraliza-tion processes of these iron deposits remain uncertain.Three ore types are identified on the basis of the geological occurrences of minerals and the sequence of mineral in ores.The typeⅠores are characte-rized by magnetite,diopside,amphibole with a few pyrite,and chalcopyrite.The type II ores are mainly composed of magnetite,garnet,chlorite with a few pyrite,while the type III ores are mainly composed of magnetite,quartz,calcite with a few pyrite.In order to constrain the mineralization processes of these ore types,we performed iron isotopes and trace element compositions of magnetite from three typical iron deposits(Yamansu,Duotoushan and Luotuofeng).Trace element and Fe isotope investiga-tions of the three ore types reveal two major groups.The groupⅠconsists of analyses of the typeⅠandⅡores,with both showing a narrow range of positiveδ56Fe values(+0.08‰to+0.22‰for typeⅠores and+0.15‰ to+0.22‰ for typeⅡores)and plotting in the range of the ortho-magmatic field.In contrast,the group 2 is composed merely of the typeⅢores,showing a wider range of negativeδ56Fe values(-0.49‰ to-0.01‰),which is similar to the features of Fe-skarn magnetite.As shown in the binary dia-grams of magnetite trace elements and a fractionation of the Fe isotopes,different ore types were likely produced during gradually changing ore-forming stages from magmatic to hydrothermal.Collectively,the submarine volcanic-hosted iron deposits in the East Tianshan are likely the results of a continuous magmatic-hydrothermal mineralization process.展开更多
The Saheb Fe-Cu skarn deposit is located in the Sanandaj-Sirjan metamorphic belt, SE Saqqez, western Iran and has been formed along the contact between the Oligo-Miocene aged Saheb granitoid and the Permian aged impur...The Saheb Fe-Cu skarn deposit is located in the Sanandaj-Sirjan metamorphic belt, SE Saqqez, western Iran and has been formed along the contact between the Oligo-Miocene aged Saheb granitoid and the Permian aged impure calcareous rocks and includes endoskarn and exoskarn. Exoskarn is widely developed and includes garnet and epidote skarn zones. The majority of mineralized zones are concentrated in garnet skarn. The relatively oxidizing mineralogical assemblage of the Saheb skarn includes garnet (andradite-grossular), pyroxene (diopside-hedenbergite), magnetite and hematite. Magnetite is the main and abundant ore mineral throughout the ore deposit. Based on field evidences and microscopic studies of skarn zone samples, two stages of prograde and retrograde alteration are distinguishable. According to the results of sample analysis of Saheb skarn intrusive body by XRF and ICP-MS techniques, the combination of this body is chiefly granite to granodiorite-diorite and belongs to the I-type granitoids, metaluminous and K-rich calc-alkaline series. The Saheb granitoid is related to the VAG (Volcanic Arc Granite) tectonic setting.展开更多
基金financially supported by the Chinese 973 project(2012CB416804)the ‘‘CAS Hundred Talents’’ Project from the Chinese Academy of Sciences(KZCX2-YW-BR-09)to Qi Liang
文摘Laser ablation–inductively coupled plasma–mass spectrometry(LA–ICP–MS) was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe(–Cu) deposits in the Eastern Tianshan Orogenic Belt. The magnetite from these deposits typically contains detectable Mg, Al, Ti, V, Cr, Mn, Co, Ni, Zn and Ga. The trace element contents in magnetite generally vary less than one order of magnitude. The subtle variations of trace element concentrations within a magnetite grain and between the magnetite grains in the same sample probably indicate local inhomogeneity of ore–forming fluids. The variations of Co in magnetite between samples are probably due to the mineral proportion of magnetite and pyrite. Factor analysis has discriminated three types of magnetite: Ni–Mn–V–Ti(Factor 1), Mg–Al–Zn(Factor 2), and Ga– Co(Factor 3) magnetite. Magnetite from the Heifengshan and Shuangfengshan Fe deposits has similar normalized trace element spider patterns and cannot be discriminated according to these factors. However, magnetite from the Shaquanzi Fe–Cu deposit has affinity to Factor 2 with lower Mg and Al but higher Zn concentrations, indicating that the ore–forming fluids responsible for the Fe–Cu deposit are different from those for Fe deposits. Chemical composition of magnetite indicates that magnetite from these Fe(–Cu) deposits was formed by hydrothermal processes rather than magmatic differentiation. The formation of these Fe(–Cu) deposits may be related to felsic magmatism.
基金granted by the Iran National Science Foundation(Grant No.98000178)the Iranian Ministry of ScienceResearch and Technology
文摘Peculiar and rare occurrences of serpentinite-hosted magnetite deposits with mineable sizes are found in the Mesozoic ophiolites of Greece(Skyros), Iran(Nain and Sabzevar) and Oman(Aniba). These deposits have diverse thickness(from a few centimeters up to 50 m) and length(2 to >500 m). Magnetite ores show variable textures, including massive, nodular and banded ores, veins, net and fine-grained disseminations in serpentinites. Intriguingly, the investigated magnetite deposits can be mistaken for chromitite pods. Serpentinite-hosted magnetite deposits show three modes of occurrences including:(i) boulders strewn across the serpentinites(i.e. Skyros Island);(ii) ore bodies along the nonconformity contacts between serpentinites and limestones(i.e. Aniba);(iii) irregular and discontinuous trails of massive and semi-massive ore bodies within highly sheared serpentinite masses(i.e. Nain;Sabzevar). In all of these magnetite ore bodies, relicts of chromian spinel grains are occasionally enclosed in magnetite crystals. The chemistry of Cr-spinel relics found in these magnetite bodies are comparable to those of accessory Crspinels in the surrounding serpentinized peridotites. BSE images and elemental mapping revealed that magnetite occurs as a nucleation on chromian spinels but not being involved in reaction either with chromite or ferritchromite. Low-grade metamorphic transformation of chromite into Fe-chromite is documented along the cracks and fractures of a few chromite grains. Generally, magnetite has typical hydrothermal compositions, characterized by low Cr, V and Ti and high Mg and Mn. It is crucial to note that a few magnetite grains with metamorphic origin are characterized by high Cr and low Ti and Ni. The potential source of iron is essentially the Fe-rich olivine. We believe that multi-episodic serpentinization of peridotite systems at high fluid-rock ratios is the main process responsible for precipitation of magnetite at ore levels whereas low-grade metamorphic transformation of chromite to magnetite has minor contribution. Cumulative factors in generation of these deposits are modal volume of mantle olivine, peridotite composition, fluid chemistry, fluid-rock ratio, mechanisms of transportation and precipitation, structural controls such as cracks and shear zones.
基金funded by the National Science Foundation of China(No.51704028)the Key R&D Program of Yunnan Province(No.2018IB027)。
文摘A novel method of pellet calcification roasting-H_(2)SO_(4) leaching was proposed to efficiently separate and extract vanadium(V)from vanadium-titanium(V-Ti)magnetite concentrates.The leaching rate of V is as high as 88.98%,while the leaching rate of impurity iron is only 1.79%.Moreover,the leached pellets can be used as raw materials for blast furnace ironmaking after secondary roasting.X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy with energy dispersive X-ray spectrometry(SEMEDS)analyses showed that V^(3+)was oxidized to V^(5+)after roasting at 1200℃,and V^(5+)was then leached by H_(2)SO_(4).X-ray diffraction(XRD)analyses and single factor experiment revealed a minimal amount of dissolved Fe_(2)O_(3) during H_(2)SO_(4) leaching.Therefore,a high separation degree of V and iron(Fe)from V-Ti magnetite concentrate was achieved through H_(2)SO_(4) leaching.Compared with the traditional roastingleaching process,this process can achieve a high selectivity of V and Fe,and has excellent prospects for industrial production.
基金supported by the National Natural Science Foundation of China (Grants 41572074 and 41273049)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB18030204)
文摘The Pingchuan iron deposit, located in the Yanyuan region of Sichuan Province, SW China, has an ore reserve of 40 Mt with ~60 wt% Fe. Its genesis is still poorly understood. The Pingchuan iron deposit has a paragenetic sequence of an early Fe-oxide–Pyrite stage(Ⅰ) and a late Fe-oxide–pyrrhotite stage(Ⅱ). Stage Ⅰ magnetite grains are generally fragmented, euhedral–subhedral, largesized crystals accompanying with slightly postdated pyrite.Stage Ⅱ magnetite grains are mostly unfragmented, anhedral, relatively small-sized grains that co-exist with pyrrhotite. Combined with micro-textural features and previously-obtained geochronological data, we consider that these two stages of iron mineralization in the Pingchuan deposit correspond to the Permian ELIP magmatism and Cenozoic fault activity event. Both the Stage Ⅰ and Ⅱ magnetites are characterized with overall lower contents of trace elements(including Cr, Ti, V, and Ni) than the ELIP magmatic magnetite, which suggests a hydrothermal origin for them. ‘‘Skarn-like'' enrichment in Sn, Mn, and Zn in the Stage Ⅰ magnetite grains indicate significant material contributions from carbonate wall-rocks due to water–rock interaction in ore-forming processes. Stage Ⅱ magnetite grains contain higher Mn concentrations than Stage Ⅰ magnetite grains, which possibly implies more contribution from carbonate rocks. In multiple-element diagrams, the Stage Ⅰ magnetite shows systematic similarities to Kiruna-type magnetite rather than those from other types of deposits. Combined with geological features and previous studies on oxygen isotopes, we conclude that hydrothermal fluids have played a key role in the generation of the Pingchuan low-Ti iron deposit.
基金supported by the National Key R&D Program of China(2018YFC0604006 and 2017YFC0601204)the National Basic Research Program of China(973 Program,2014CB440803)。
文摘The Yamansu iron deposit is hosted in submarine volcanic rocks in the Aqishan–Yamansu belt of Eastern Tianshan,NW China.A geological cross-section for the Carboniferous strata in the ore district shows that ore bodies in the Yamansu deposit are hosted in andesitic crystal tuff of the third cycle of the Carboniferous Yamansu Formation.This indicates an association between mineralization and volcanism.The orebodies are strata bound and lensoid and generally share the occurrence state of the host rocks.Magnetite mineralization mainly occurs asbreccia ores,ores in the mineralized volcanic rocks,massive ores,and sulfide-rich ores according to their structures and sequences of formation.Trace element compositions of magnetite from various types of ores were determined by LA-ICP-MS.The dataset indicates thatdifferent types of magnetite havedistinct trace element contents correlated to their formation environments.Magnetite crystals from breccia ores have high Ti,Ni,V,Cr,and Co and low Si,Al,Ca,and Mg contents,indicating crystallization from a volcanic magmatic eruption,which is consistent with field evidence of coexisting altered volcanic breccia.Magnetite crystals from ores in the mineralized volcanic rocks have moderate Ti,Ni,V,Cr,and Co contents.In contrast,magnetite from massive ores and sulfide-rich ores have low concentrations of Ti,Cr,Ni,and V,high concentrations of Si,Al,Ca,and Mg,and evidence of hydrothermal magnetite.In-situ magnetite compositions imply a magmatic-hydrothermal process.Although d18 O values for magnetite grains from Yamansu vary(?1.3 to?7.0%),they all plot in the range field of volcanic iron deposits,and they also record a magmatic-hydrothermal process.The compositions of Yamansu magnetites are interpreted as controlled mainly by temperature,fluid,host rock buffering,oxygen fugacity,and sulfur fugacity.The metallogenic conditions of the Yamansu deposit changed from high temperature and low oxygen fugacity to low temperature and high oxygen fugacity.However,more fluid-rock reactions and higher sulfur fugacity were involved during the deposition of massive ores and sulfiderich ores.
文摘The Shaytor apatite-rich iron deposit is located in the Kashmar-Kerman tectonic zone in the central of the Iranian plat, which is an important polymetallic belt in Iran. The ore bodies are interbedded with the upper inferacaamberian calc-alkaline igneous rocks that show well-preserved porphyritic and volcaniclastic textures. The iron ores have massive, disseminated, and brecciated structures. Magnetite from the Shaytor deposit is low in Ti (TiO<sub>2</sub> = up to 0.70 wt.%) and different ore types show similar rare earth element (REE) and trace element-normalized patterns with weak-to-moderate enrichment in light REE and negative Eu anomalies, indicating a common source and genesis. The similar REE patterns for the magnetite and volcanic basaltic host rocks suggest their close genetic linkage and support a magmatic origin for the deposit. The Shaytor deposit shows the typical characteristics of Kiruna-type deposits with regard to the mineral assemblages, ore texture and structure, and the apatite and magnetite geochemistry. We propose that the Kiruna-type Shaytor apatite-rich iron deposit was derived from Fe-P-rich melt through liquid immiscibility and the activity of hydrothermal fluids.
基金funded by CAS“Light of West China”Program to YMMthe Key project of the National Natural Science Foundation of China(41230316)+3 种基金National Natural Science Foundation of China(41503039)the“CAS Hundred Talents”Project to JFG(Y5CJ038000)Research Initial Funding(Y4KJA20001 and Y5KJA20001)Independent Topics Fund(Y4CJ009000)of the Institute of Geochemistry,Chinese Academy of Sciences
文摘Magnetite is a very common mineral in various types of iron deposits and some sulfide deposits. Recent studies have focused on the use of trace elements in magnetite to discriminate ore types or trace ore-forming process. Germanium is a disperse element in the crust, but sometimes is not rare in magnetite. Germanium in magnetite can be determined by laser ablation ICP-MS due to its low detection limit(0.0X ppm). In this study, we summary the Ge data of magnetite from magmatic deposits, iron formations, skarn deposits, iron oxide copper-gold deposits, and igneous derived hydrothermal deposits. Magnetite from iron formations contains relatively high Ge(up to ~250 ppm), whereas those from all other deposits mostly contains Ge less than 10 ppm, indicating that iron formations can be discriminated from other Fe deposits by Ge contents. Germanium in magmatic/hydrothermal magnetite is controlled by a few factors. Primary magma/fluid composition may be the major control of Ge in magnetite. Higher oxygen fugacity may be beneficial to Ge partition into magnetite. Sulfur fugacity and temperature may have little effect on Ge in magnetite. The enrichment mechanism of Ge in magnetite from iron formations remains unknown due to the complex ore genesis. Germanium along with other elements(Mn, Ni, Ga) and element ratios(Ge/Ga and Ge/Si raios) can distinguish different types of deposits, indicating that Ge can be used as a discriminate factor like Ti and V. Because of the availability of in situ analytical technique like laser ablation ICP-MS, in situ Ge/Si ratio of magnetite can serve as a geochemical tracer and may provide new constraints on the genesis of banded iron formations.
文摘Qara-aghaj and Skandian as hard rock titanium deposit and Kahnooj one as a placer deposit were investigated from applied mineralogical point of view. The mineralogical studies were carried out using XRD, XRF, optical microscopy, scanning electron microscopy and microprobe analysis. These studies indicated that ilmenite and magnetite are main valuable minerals in the studied ores. Pyroxene, olivine and plagioclase are the main gangue minerals in Qara-aghaj ore while chlorite and plagioclase are the major gangue minerals in Skandian ore. Plagioclase, clinopyroxene, amphibole, feldspate and some quartz are the important gangue minerals in kahnooj deposit. In all three ores ilmenite is mainly in the form of ilmenite grains but some lamellae of ilmenite with thickness between 0.1 to 20 μm have been occurred as exsolution textures inside magnetite grains, where the magnetite here can be referred to as ilmenomagnetite. In the hard rock ores some fine ilmenites have been disseminated in silicate minerals. The liberation degree of granular ilmenite was determined 150, 140 and 200 μm for Qara-aghaj, Skandian and Kahnooj, respectively. So, only the granular form of ilmenite is recoverable by physical methods. Some sphene and rutile as titanium containing minerals were observed mainly inside ilmenite phase in kahnooj ore. Some fine rutile was also found inside Skandian ilmenite while there were not any other titanium minerals inside Qara-aghaj ilmenite. Apatite is another valuable mineral which was found only in Qara-aghaj ore. Using SEM and microprobe analysis it was found that there are different amounts of exsolved fine lamellae of hematite inside ilmenite in Qara-aghaj and Kahnooj ores while it was not observed in Sckandian one. The average contents of TiO2 in the lattice of Qara-aghaj, Skandian and Kahnooj ilmenite were determined 51.13, 50.9% and 52.02%, respectively. FeO content of ilmenite lattice for all three samples is clearly lower than the theoretical content. This is due to the substitution of Mg and Mn for some Fe2+ ions in the ilmenite lattice. V2O3 content of magnetite lattice is up to 1%. So, magnetite can be a suitable source for production of vanadium as a by-product in all three deposits.
文摘In-situ hydrothermal experiments using diamond-anvil cell show that sulfate and sulfi de are the dominant sulfur species under P-T conditions similar to those of porphyry magmas.No sulfi te was identifi ed using in-situ Raman spectrometer.This supports that porphyry copper mineralization is controlled by sulfate reduction,rather than sulfi te disproportionation.
基金This study was financially supported by National Natural Science Foundation of China(No.41672078)the China Geological Survey(No.DD20190606).
文摘The Aqishan-Yamansu metallogenic belt(AYMB)in East Tianshan hosts abundant sub-marine volcanic-hosted iron deposits.Although there is agreement with the magmatic source of the ore-forming materials and the role of hydrothermal replacement in iron ore formation,the mineraliza-tion processes of these iron deposits remain uncertain.Three ore types are identified on the basis of the geological occurrences of minerals and the sequence of mineral in ores.The typeⅠores are characte-rized by magnetite,diopside,amphibole with a few pyrite,and chalcopyrite.The type II ores are mainly composed of magnetite,garnet,chlorite with a few pyrite,while the type III ores are mainly composed of magnetite,quartz,calcite with a few pyrite.In order to constrain the mineralization processes of these ore types,we performed iron isotopes and trace element compositions of magnetite from three typical iron deposits(Yamansu,Duotoushan and Luotuofeng).Trace element and Fe isotope investiga-tions of the three ore types reveal two major groups.The groupⅠconsists of analyses of the typeⅠandⅡores,with both showing a narrow range of positiveδ56Fe values(+0.08‰to+0.22‰for typeⅠores and+0.15‰ to+0.22‰ for typeⅡores)and plotting in the range of the ortho-magmatic field.In contrast,the group 2 is composed merely of the typeⅢores,showing a wider range of negativeδ56Fe values(-0.49‰ to-0.01‰),which is similar to the features of Fe-skarn magnetite.As shown in the binary dia-grams of magnetite trace elements and a fractionation of the Fe isotopes,different ore types were likely produced during gradually changing ore-forming stages from magmatic to hydrothermal.Collectively,the submarine volcanic-hosted iron deposits in the East Tianshan are likely the results of a continuous magmatic-hydrothermal mineralization process.
文摘The Saheb Fe-Cu skarn deposit is located in the Sanandaj-Sirjan metamorphic belt, SE Saqqez, western Iran and has been formed along the contact between the Oligo-Miocene aged Saheb granitoid and the Permian aged impure calcareous rocks and includes endoskarn and exoskarn. Exoskarn is widely developed and includes garnet and epidote skarn zones. The majority of mineralized zones are concentrated in garnet skarn. The relatively oxidizing mineralogical assemblage of the Saheb skarn includes garnet (andradite-grossular), pyroxene (diopside-hedenbergite), magnetite and hematite. Magnetite is the main and abundant ore mineral throughout the ore deposit. Based on field evidences and microscopic studies of skarn zone samples, two stages of prograde and retrograde alteration are distinguishable. According to the results of sample analysis of Saheb skarn intrusive body by XRF and ICP-MS techniques, the combination of this body is chiefly granite to granodiorite-diorite and belongs to the I-type granitoids, metaluminous and K-rich calc-alkaline series. The Saheb granitoid is related to the VAG (Volcanic Arc Granite) tectonic setting.