期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
φ-pH diagram of V-Ti-H_2O system during pressure acid leaching of converter slag containing vanadium and titanium 被引量:4
1
作者 牟望重 张廷安 +2 位作者 豆志河 吕国志 刘燕 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2011年第9期2078-2086,共9页
To analyze the thermodynamic characteristics of leaching process of converter slag, φ-pH diagram of V-Ti-H2O system at oxygen partial pressure of 0.5 MPa, ionic mass concentration of 0.1 mol/kg and temperatures rangi... To analyze the thermodynamic characteristics of leaching process of converter slag, φ-pH diagram of V-Ti-H2O system at oxygen partial pressure of 0.5 MPa, ionic mass concentration of 0.1 mol/kg and temperatures ranging from 60 to 200 ℃ was obtained by recently published critically assessed standard Gibbs energies and activity coefficients of various species. When pH2, stable regions of V3+, VO2+ and VO2+ exist in the stable region of TiO2. The pH values of stable regions of vanadium and titanium decrease and redox potentials become more positive with the temperature increasing. Vanadium and titanium could be separated by one-step leaching based on thermodynamics. The experiment results of pressure acid leaching of converter slag show that leaching rates of vanadium and titanium are 96.87% and 8.76% respectively, at 140 ℃ of temperature, 0.5 MPa of oxygen partial pressure, 0.055-0.075mm of particle size, 15:1 of liquid to solid ratio, 120 min of leaching time, 500 r/min of stirring speed and 200 g/L of initial acid concentration. Vanadium and titanium could be selectively separated in the pressure acid leaching process, and the experiment result is in agreement with thermodynamic calculation result. 展开更多
关键词 φ-pH diagram v-ti-h2o system pressure acid leaching converter slag VANADIUM titanium
下载PDF
锰铈改性钒钨钛中低温SCR催化剂脱硝及抗水抗硫性能 被引量:12
2
作者 黄金 仲兆平 +3 位作者 朱林 薛建明 许月阳 吴培亭 《化工进展》 EI CAS CSCD 北大核心 2018年第6期2242-2248,共7页
结合Mn的低温脱硝活性与Ce的储氧能力,将Mn-Ce作为整体改性剂,添加到传统钒钨钛催化剂中,用浸渍法制备了8份样品,以NH_3为还原剂,于管式固定反应器内进行脱硝及抗水抗硫实验,通过NH_3-TPD、H_2-TPR、N_2物理吸附测试、XRD手段对样品进... 结合Mn的低温脱硝活性与Ce的储氧能力,将Mn-Ce作为整体改性剂,添加到传统钒钨钛催化剂中,用浸渍法制备了8份样品,以NH_3为还原剂,于管式固定反应器内进行脱硝及抗水抗硫实验,通过NH_3-TPD、H_2-TPR、N_2物理吸附测试、XRD手段对样品进行表征。综合脱硝活性及240℃抗水抗硫测试结果,选出较优的改性催化剂为3V-10W-7.7Mn-4.3Ce/75Ti,其在180~330℃保持脱硝活性95%以上,240℃抗水抗硫活性稳定在80%左右。该样品的比表面积虽然不到67m^2/g,但是Mn O_2与Ce O_2高度分散在Ti O_2表面;7.7%含量的Mn O_2也使催化剂具有大量的强酸位点,能够增强对NH_3的吸附;适当含量的Ce也增强了催化剂的低温氧化还原能力。 展开更多
关键词 选择催化还原 催化剂 锰铈 钒钨钛 中低温 抗水抗硫
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部