Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_...Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_(32)V_(40+x)Fe_(23-x)Mn_(5)(x=0,4,8,12,at.%)alloys were designed,and the effects of V/Fe ratio on phase constitution and hydrogen storage properties were investigated.The main phase of the alloys is body-centered cubic(BCC)phase,and the lattice constants of the BCC phase decrease with the decrease of V/Fe ratio.Moreover,C14 Laves phase exists in alloys with a Fe content of 19at.%to 23at.%.For hydrogenation,the C14 Laves phase can accelerate the hydrogen absorption rate,but the hydrogen absorption capacity is reduced.With the decrease of V/Fe ratio,the hydride gradually destabilizes.Owing to its large lattice constant and high hydrogen absorption phase content,the Ti_(32)V_(52)Fe_(11)Mn_(5)alloy shows the most enhanced hydrogen storage properties with hydrogenation and dehydrogenation capacities of 3.588wt.%at 298 K and 1.688wt.%at 343 K,respectively.The hydrogen absorption capacity of this alloy can be reserved to 3.574wt.%after 20 cycles of hydrogen absorption and desorption.展开更多
Effect of Ce addition on microstructure and hydrogen storage performance of Ti24Cr17.5V50Fe8.5Cex（x=0, 0.5at.%, 0.8at.% and 1.0at.%） alloys was studied by X-ray diffraction, scanning electron microscopy and P-C-isot...Effect of Ce addition on microstructure and hydrogen storage performance of Ti24Cr17.5V50Fe8.5Cex（x=0, 0.5at.%, 0.8at.% and 1.0at.%） alloys was studied by X-ray diffraction, scanning electron microscopy and P-C-isotherm measurements.The results indicated that Ce addition was a useful way to improve the flatness of the plateau and increase hydrogen storage capacity of Ti24Cr17.5V50Fe8.5 alloy.It was indicated that both homogenization of composition and increase of hydrogen diffusion coefficient were the main reasons for improving the hydrogen storage performance of Ti24Cr17.5V50Fe8.5Cex alloys.展开更多
Based on the analysis of XRD, SEM, P-C-isotherm measurements and absorption kinetics simulation, it was indicated that Ce addition was an effective way to inhibit the formation of C14 Laves phase, improve flatness of ...Based on the analysis of XRD, SEM, P-C-isotherm measurements and absorption kinetics simulation, it was indicated that Ce addition was an effective way to inhibit the formation of C14 Laves phase, improve flatness of the plateau, increase hydrogen diffusion rate and enlarge hydrogen storage capacity. The hydrogenation capacity of Ti27.25Cr28.05V37.25Fe7.45Ce1.0 alloy prepared by commercial ferrovanadium was 3.56 wt.% measured at 298 K. The dehydrogenation capacity was 2.25 wt.% and 2.54 wt.% measured at 343...展开更多
The hydrogen storage performance of single BCC phase Ti-V-based alloys was investigated. A hydrogen absorption capacity of 4.2% was achieved at 293 K at a modest pressure(3 MPa) for Ti-40V-10Cr-10Mn alloy. The effecti...The hydrogen storage performance of single BCC phase Ti-V-based alloys was investigated. A hydrogen absorption capacity of 4.2% was achieved at 293 K at a modest pressure(3 MPa) for Ti-40V-10Cr-10Mn alloy. The effective hydrogen capacity of this alloy is 2.6% at 353 K. Moreover, the alloy exhibits a better activation property and flatter hydrogen absorption-desorption plateau. In order to meet different practical application needs, a series of Ti-V-based alloys with various PCT plateau pressures could be obtained by varying the element contents of the alloys, which opened the hope to bring Ti-V-based alloy into reaching the practical application for onboard hydrogen storage systems in fuel cell powered vehicles.展开更多
V48Fe12Ti15Cr25 alloy was prepared using vacuum arc melting and was subsequently annealed for 10 h at 1273 K.The effects of annealing on the hydrogen storage properties and microstructure of the V48Fe12Ti15Cr25 alloys...V48Fe12Ti15Cr25 alloy was prepared using vacuum arc melting and was subsequently annealed for 10 h at 1273 K.The effects of annealing on the hydrogen storage properties and microstructure of the V48Fe12Ti15Cr25 alloys were investigated.The results indicated that the alloy consisted of main body-centered cubic,Ti-rich,and TiFe phases.After annealing,the kinetic properties of the alloy were improved but its hydrogen storage capacity was slightly reduced.The kinetic mechanisms of the hydrogen absorption and desorption of the alloys were studied.The dehydrogenation enthalpy of the alloy was decreased by 2.57 kJ/mol after annealing.Differential scanning calorimetry indicated that the hydride decomposition temperature of the annealed alloy was decreased.The hydrogen desorption activation energies of the as-cast and annealed alloys were calculated to be 79.41 and 71.25 kJ/mol,respectively.The results illustrated that annealing was a beneficial method of improving the kinetic and thermodynamic properties of the hydrogen absorption/desorption of the alloy.展开更多
Crystal structure and some dynamic performances of Zi0.25V0.34Dy0.01Cr0.1Ni0.3 hydrogen storage electrode alloy have been investigated by XRD, FESEM-EDS, TEM and EIS measurements. The result shows that the alloy is ma...Crystal structure and some dynamic performances of Zi0.25V0.34Dy0.01Cr0.1Ni0.3 hydrogen storage electrode alloy have been investigated by XRD, FESEM-EDS, TEM and EIS measurements. The result shows that the alloy is mainly composed of V-based solid solution phase with body-centered-cubic structure and mono-crystal Ni3Ti phase with hexagonal structure （Space grope： P63/ mmc）, and it was first observed as TiNi-based secondary phase. The higher charge transfer resistance, higher apparent activation energy and lower hydrogen diffusion coefficient are reasons for the poor electrochemical activity of the dehydriding kinetics of Ti- V-Cr-Ni hydride alloy.展开更多
基金supported by the National Key Research and Development Program of China(2023YFB4005401)the National Natural Science Foundation of China(52425401,52204386)the Natural Science Foundation of Heilongjiang Province(JQ2023E003).
文摘Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_(32)V_(40+x)Fe_(23-x)Mn_(5)(x=0,4,8,12,at.%)alloys were designed,and the effects of V/Fe ratio on phase constitution and hydrogen storage properties were investigated.The main phase of the alloys is body-centered cubic(BCC)phase,and the lattice constants of the BCC phase decrease with the decrease of V/Fe ratio.Moreover,C14 Laves phase exists in alloys with a Fe content of 19at.%to 23at.%.For hydrogenation,the C14 Laves phase can accelerate the hydrogen absorption rate,but the hydrogen absorption capacity is reduced.With the decrease of V/Fe ratio,the hydride gradually destabilizes.Owing to its large lattice constant and high hydrogen absorption phase content,the Ti_(32)V_(52)Fe_(11)Mn_(5)alloy shows the most enhanced hydrogen storage properties with hydrogenation and dehydrogenation capacities of 3.588wt.%at 298 K and 1.688wt.%at 343 K,respectively.The hydrogen absorption capacity of this alloy can be reserved to 3.574wt.%after 20 cycles of hydrogen absorption and desorption.
基金supported by Hi-Tech Research and Development Program of China (2006AA05Z144)
文摘Effect of Ce addition on microstructure and hydrogen storage performance of Ti24Cr17.5V50Fe8.5Cex（x=0, 0.5at.%, 0.8at.% and 1.0at.%） alloys was studied by X-ray diffraction, scanning electron microscopy and P-C-isotherm measurements.The results indicated that Ce addition was a useful way to improve the flatness of the plateau and increase hydrogen storage capacity of Ti24Cr17.5V50Fe8.5 alloy.It was indicated that both homogenization of composition and increase of hydrogen diffusion coefficient were the main reasons for improving the hydrogen storage performance of Ti24Cr17.5V50Fe8.5Cex alloys.
基金Project supported by the Hi-Tech Research and Development Program of China (2007AA05Z111, 2007AA05Z106)Major State Basic Research Development Program of China (2010CB631305)
文摘Based on the analysis of XRD, SEM, P-C-isotherm measurements and absorption kinetics simulation, it was indicated that Ce addition was an effective way to inhibit the formation of C14 Laves phase, improve flatness of the plateau, increase hydrogen diffusion rate and enlarge hydrogen storage capacity. The hydrogenation capacity of Ti27.25Cr28.05V37.25Fe7.45Ce1.0 alloy prepared by commercial ferrovanadium was 3.56 wt.% measured at 298 K. The dehydrogenation capacity was 2.25 wt.% and 2.54 wt.% measured at 343...
文摘The hydrogen storage performance of single BCC phase Ti-V-based alloys was investigated. A hydrogen absorption capacity of 4.2% was achieved at 293 K at a modest pressure(3 MPa) for Ti-40V-10Cr-10Mn alloy. The effective hydrogen capacity of this alloy is 2.6% at 353 K. Moreover, the alloy exhibits a better activation property and flatter hydrogen absorption-desorption plateau. In order to meet different practical application needs, a series of Ti-V-based alloys with various PCT plateau pressures could be obtained by varying the element contents of the alloys, which opened the hope to bring Ti-V-based alloy into reaching the practical application for onboard hydrogen storage systems in fuel cell powered vehicles.
基金National Natural Science Foundation of China(Grant No.51901105)Natural Science Foundation of Inner Mongolia,China(Grant Nos.2018LH05010,2019BS05005,and 2017BS0507).
文摘V48Fe12Ti15Cr25 alloy was prepared using vacuum arc melting and was subsequently annealed for 10 h at 1273 K.The effects of annealing on the hydrogen storage properties and microstructure of the V48Fe12Ti15Cr25 alloys were investigated.The results indicated that the alloy consisted of main body-centered cubic,Ti-rich,and TiFe phases.After annealing,the kinetic properties of the alloy were improved but its hydrogen storage capacity was slightly reduced.The kinetic mechanisms of the hydrogen absorption and desorption of the alloys were studied.The dehydrogenation enthalpy of the alloy was decreased by 2.57 kJ/mol after annealing.Differential scanning calorimetry indicated that the hydride decomposition temperature of the annealed alloy was decreased.The hydrogen desorption activation energies of the as-cast and annealed alloys were calculated to be 79.41 and 71.25 kJ/mol,respectively.The results illustrated that annealing was a beneficial method of improving the kinetic and thermodynamic properties of the hydrogen absorption/desorption of the alloy.
基金financially supported by the Doctoral Foundation of Yanshan University(No.B330)
文摘Crystal structure and some dynamic performances of Zi0.25V0.34Dy0.01Cr0.1Ni0.3 hydrogen storage electrode alloy have been investigated by XRD, FESEM-EDS, TEM and EIS measurements. The result shows that the alloy is mainly composed of V-based solid solution phase with body-centered-cubic structure and mono-crystal Ni3Ti phase with hexagonal structure （Space grope： P63/ mmc）, and it was first observed as TiNi-based secondary phase. The higher charge transfer resistance, higher apparent activation energy and lower hydrogen diffusion coefficient are reasons for the poor electrochemical activity of the dehydriding kinetics of Ti- V-Cr-Ni hydride alloy.
