Cemented vertebra and adjacent vertebra refractured in a chronic kidney disease-mineral and bone disorder patient: A case report

BACKGROUND Although percutaneous vertebral augmentation(PVA)is a commonly used procedure for treating vertebral compression fracture(VCF),the risk of vertebral refracture should be considered.Chronic kidney disease-mineral and bone disorder(CKD-MBD)is a systemic disease of mineral and bone metabolism.It is associated with an increased risk of fracture.Few studies have reported the use of PVA in patients with CKD-MBD.We herein report a rare case wherein the cemented vertebra and the adjacent vertebra refractured simultaneously in a CKD-MBD patient after PVA.CASE SUMMARY A 74-year-old man suffered from low back pain after taking a fall about 3 wk ago.According to physical examination,imaging and laboratory findings,diagnoses of T12 VCF,CKD-MBD,and chronic kidney disease stage 5 were established.He then received percutaneous vertebroplasty at T12 vertebra.Fourteen weeks later,he presented with T12 and L1 vertebral refractures caused by lumbar sprain.Once again,he was given PVA which was optimized for the refractured vertebrae.Although the short-term postoperative effect was satisfactory,he reported chronic low back pain again at the 3-month follow-up.CONCLUSION It is necessary that patients with CKD-MBD who have received PVA are aware of the adverse effects of CKD-MBD.It may increase the risk of vertebral refracture.Furthermore,the PVA surgical technique needs to be optimized according to the condition of the patient.The medium-and long-term effects of PVA remain uncertain in patients with CKD-MBD.

Genome-wide association study for numbers of vertebrae in Dezhou donkey population reveals new candidate genes

Numbers of vertebrae is an important economic trait associated with body size and meat productivity in animals.However,the genetic basis of vertebrae number in donkey remains to be well understood.The aim of this study was to identify candidate genes affecting the number of thoracic(TVn)and the number of lumbar vertebrae(LVn)in Dezhou donkey.A genome-wide association study was conducted using whole genome sequence data imputed from low-coverage genome sequencing.For TVn,we identified 38 genome-wide significant and 64 suggestive SNPs,which relate to 7 genes(NLGN1,DCC,SLC26A7,TOX,WNT7A,LOC123286078,and LOC123280142).For LVn,we identified 9 genome-wide significant and 38 suggestive SNPs,which relate to 8 genes(GABBR2,FBXO4,LOC123277146,LOC123277359,BMP7,B3GAT1,EML2,and LRP5).The genes involve in the Wnt and TGF-βsignaling pathways and may play an important role in embryonic development or bone formation and could be good candidate genes for TVn and LVn.

Predictive risk factors for recollapse of cemented vertebrae after percutaneous vertebroplasty: A meta-analysis

BACKGROUND As one of the most common complications of osteoporosis,osteoporotic vertebral compression fracture(OVCF)increases the risk of disability and mortality in elderly patients.Percutaneous vertebroplasty(PVP)is considered to be an effective,safe,and minimally invasive treatment for OVCFs.The recollapse of cemented vertebrae is one of the serious complications of PVP.However,the risk factors associated with recollapse after PVP remain controversial.AIM To identify risk factors for the recollapse of cemented vertebrae after PVP in patients with OVCFs.METHODS A systematic search in EMBASE,MEDLINE,the Cochrane Library,and PubMed was conducted for relevant studies from inception until March 2020.Studies investigating risk factors for the recollapse of cemented vertebrae after PVP without additional trauma were selected for analysis.Odds ratios(ORs)or standardized mean differences with 95%confidence interval(CI)were calculated and heterogeneity was assessed by both the chi-squared test and the I-squared test.The methodological quality of the included studies was assessed according to the Newcastle-Ottawa Scale.RESULTS A total of nine case-control studies were included in our meta-analysis comprising 300 cases and 2674 controls.The significant risk factors for the recollapse of cemented vertebrae after PVP in OVCF patients were fractures located at the thoracolumbar junction(OR=2.09;95%CI:1.30 to 3.38;P=0.002),preoperative intravertebral cleft(OR=2.97;95%CI:1.93 to 4.57;P<0.00001),and solid lump distribution pattern of the cement (OR = 3.11;95%CI: 1.91 to 5.07;P < 0.00001).The analysis did not support that age, gender, lumbar bone mineral density,preoperative visual analogue scale score, injected cement volume, intradiscalcement leakage, or vertebral height restoration could increase the risk forcemented vertebra recollapse after PVP in OVCFs.CONCLUSIONThis meta-analysis suggests that thoracolumbar junction fractures, preoperativeintravertebral cleft, and solid lump cement distribution pattern are associatedwith the recollapse of cemented vertebrae after PVP in OVCF patients.

Treatment of Protrusion of the Lumbar Intervertebral Disc by TCM Massage

Protrusion of the lumbar intervertebral disc is a common disorder frequently encountered in clinic. With TCM massage and the maneuver of manual reduction, we have treated 82 cases of protrusion of the lumbar intervertebral disc, with satisfactory therapeutic results reported in the following.……

3D Shape Reconstruction of Lumbar Vertebra From Two X-ray Images and a CT Model

Structure reconstruction of 3 D anatomy from biplanar X-ray images is a challenging topic. Traditionally, the elastic-model-based method was used to reconstruct 3 D shapes by deforming the control points on the elastic mesh. However, the reconstructed shape is not smooth because the limited control points are only distributed on the edge of the elastic mesh.Alternatively, statistical-model-based methods, which include shape-model-based and intensity-model-based methods, are introduced due to their smooth reconstruction. However, both suffer from limitations. With the shape-model-based method, only the boundary profile is considered, leading to the loss of valid intensity information. For the intensity-based-method, the computation speed is slow because it needs to calculate the intensity distribution in each iteration. To address these issues, we propose a new reconstruction method using X-ray images and a specimen’s CT data. Specifically, the CT data provides both the shape mesh and the intensity model of the vertebra. Intensity model is used to generate the deformation field from X-ray images, while the shape model is used to generate the patient specific model by applying the calculated deformation field.Experiments on the public synthetic dataset and clinical dataset show that the average reconstruction errors are 1.1 mm and1.2 mm, separately. The average reconstruction time is 3 minutes.

CLINICAL OBSERVATION ON THE TREATMENT OF LUMBAR VERTEBRA HYPEROSTEOGENY WITH ELECTRO- AND HYDRO-ACUPUNCTURE

In the present study, 121 patients with lumbar vertebra hyperosteogeny were dividedinto following four groups for treatment and comparison: intense electro-acupuncture group (Group1), hydro-acupuncture group (Group 2), electro-acupuncture plus hydro-acupuncture group (Group3) and analgesic liquid for spur group (Group 4). It is indicated that the effect of electro-acupunctureplus hydro-acupuncture is the best in the treatment of lumbar vertebra hyperosteogeny.

Scedosporium apiospermum infection of the lumbar vertebrae:A case report

BACKGROUND Scedosporium apiospermum(S.apiospermum)is a clinically rare and aggressive fungus mainly found in contaminated water,wetlands,decaying plants,stagnant water,and potted plants in hospitals.The lung,bone,joint,eye,brain,skin,and other sites are easily infected,and there is a marked risk of misdiagnosis.There have been few case reports of infection by S.apiospermum of the lumbar vertebrae;most reports have focused on infection of the lung.CASE SUMMARY An otherwise healthy 60-year-old man presented with a 4-mo history of lumbosacral pain,stooping,and limited walking.The symptoms were significantly aggravated 10 d prior to hospitalization,and radiating pain in the back of his left lower leg developed,which was so severe that he could not walk.Movement of the lumbar spine was significantly limited,anterior flexion was about 30°;backward extension,right and left lateral curvature,and rotational mobility were about 10°;tenderness of the spinous processes of the lumbar 3-5 vertebrae was evident,and the muscle strength of both lower limbs was gradeⅣ.Imaging suggested bony destruction of the lumbar 3,4,and 5 vertebrae and sacral 1 vertebra;in addition,the corresponding intervertebral spaces were narrowed and the lumbar 5 vertebra was posteriorly displaced and unstable.Lumbar vertebral infection was also noted,and the possibility of lumbar tuberculosis was considered.We first performed surgical intervention on the lesioned lumbar vertebrae,cleared the infected lesion,and performed stable fixation of the lesioned vertebral body using a lumbar internal fixation device,which restored the stability of the lumbar vertebrae.Cytological and pathological examination of the lesioned tissue removed during surgery confirmed S.apiospermum infection of the lumbar vertebrae;on this basis,the patient was administered voriconazole.At the 6-mo followup,efficacy was significant,no drug-related side effects were observed,and imaging examination showed no evidence of recurrence.CONCLUSION S.apiospermum infection can occur in immunocompetent individuals with no history of near drowning.Voriconazole is effective for the treatment of S.apiospermum infection of the lumbar vertebrae for which it is suitable as the first-line therapy.

Another Look at Skeletal Maturation Using Hand Wrist and Cervical Vertebrae Evaluation

Introduction and Aims—The Growth stage of a patient can have considerable influence on diagnosis, treatment goals, timing and planning and the eventual outcome of orthodontic/orthopedic treatment. The purpose of this study was to analyze associations between the cervical vertebrae maturation score (CVMS) and skeletal maturation index (SMI). The second objective was to determine the reproducibility of the measurements on lateral cephalograms and hand-wrist radiographs. Materials and Methods—Lateral cephalometric and left hand-wrist radiographs of 92 untreated subjects (44 females and 48 males) aged from 8 to 17 years were obtained from the files of the Columbia University, Division of Orthodontics and measured for growth stage using cervical vertebrae and hand-wrist methods. Results—A high correlation was revealed between the hand-wrist and cervical vertebrae measurements. The Spearman’s rho correlation coefficient was 0.925 and significant at the 0.01 level. The correlation between hand-wrist and age (0.665, p < 0.01) was slightly greater than that of the CVMS (0.611, p < 0.01). Intra rater reliability was high. When the three categorically modified methods of the Fishman’s 11 skeletal maturation stages in hand and wrist analysis were used to compare with CVMS, methods 2 and 3 were both statistically significantly different according to the Wilcoxon signed ranks test and the Sign test at a significance level of less than 0.05. However, for method 1, the tests showed probability scores of 0.028 and 0.151, respectively, showing no significant difference at the 0.01 level in the Wilcoxon Signed Ranks Test, and no significant difference in the 0.01 and 0.05 level in the Signed Test. Conclusions—The Fishman’s hand and wrist skeletal maturation index and Bacetti’s cervical vertebrae maturation stages are both useful tools in evaluating growth stages. Fishman’s hand-wrist method is slightly more accurate.

Vertebrae CT Images 3D Reconstruction with Improve Marching Cubes Algorithm

Medical images 3D reconstruction is an important part in medical image analysis and processing. Although lots of algorithms have been proposed continuously, speed and accuracy cannot conform to actual needs, which has always been the focus topic. In this paper, we propose an Improved Marching Cubes algorithm ( I-MC) based on the surface rendering theory, which implements 3D reconstruction of the vertebrae. Firstly, we preprocessed the original 2D vertebrae CT images with the bilateral-filter denoising algorithm. Secondly, on the basis of the traditional Marching Cubes algorithm, the seed voxels were extracted and the Region Growing algorithm was used to determine all voxels that contain isosurfaces. Then, the Golden Section instead of the traditional linear interpolation was used to calculate the equivalent point, and this method reduced the calculations of public edges. VTK and OpenGL implemented 3D reconstruction of the vertebrae on GPU quickly and accurately. The experimental results show that when compared with the traditional Marching Cubes algorithm and Mesh Simplification Marching Cubes algorithm, the improved algorithm achieves a significant improvement of reconstruction speed while preserving the accurate results. The efficiency of algorithm is improved dramatically. This method is real-time and achieves the goal of efficient 3D reconstruction of vertebrae CT images.

Investigation of optical reflectance from different animal vertebra along the fixation trajectory of pedicle screw in frequency domain

Accurate placement of pedicle screw(PS)is crucial in spinal surgery.Developing new real-time intra-operative monitoring and navigation methods is an important direction of clinical appli-cation research.In this paper,we studied the spectrum along the fixation trajectory of PS in frequency domain to tackle the accuracy problem.Fresh porcine vertebrae,bovine vertebrae and ovine vertebrae were measured with the near-infrared spectrum(NIR)device to obtain the reflected spectrum from the vertebrae.Along the fixation trajectory of PS,average energy from different groups was calculated and used for identifying different tissues and compared to achieve the optimal recognition factor.Compared with the time domain approach,the frequency domain method could divide the spectra measured at different tissue points into different groups more stably and accurately,which could serve as a new method to assist the PS insertion.The results gained from this study are significant to the development of hi-tech medical instruments with independent intellectual property rights.

Cortical bone trajectory fixation in cemented vertebrae in lumbar degenerative disease:A case report

BACKGROUND Percutaneous vertebroplasty(PVP)has been widely used in osteoporotic vertebral compression fracture(OVCF).Following surgery,the bone cement would be positioned permanently.However,in some cases of lumbar degenerative disease,the cemented vertebrae needs to be fixed after decompression and fusion procedure.It is difficult to implant traditional pedicle screws into the cemented vertebrae because of the bone cement filling.At present,the main treatment strategy is to skip the cemented vertebra and conduct a long segment fixation.This article presents a cortical bone trajectory(CBT)fixation technique for cemented vertebrae.CASE SUMMARY PVP involving the L3 and L4 was performed in an 82-year-old man due to OVCF.During the surgery,bone cement leakage occurred,resulting in compression of the root of the right L3 nerve.We performed a partial facetectomy to retrieve the leaked bone cement and to relieve the patient’s neurological symptoms.After 3 mo,the patient developed lumbar disc herniation in L3/4,potentially due to instability caused by the previous surgery.Therefore,it was necessary to perform intervertebral fusion and fixation.It was difficult to implant traditional trajectory pedicle screws in L3 and L4 because of the bone cement filling.Hence,we implanted CBT screws in the L3 and L4 vertebrae.As a result,the patient’s symptoms resolved and he reported satisfaction with the surgery at follow-up after 8 mo.CONCLUSION It is feasible to utilize CBT in cemented vertebrae for the treatment of lumbar degenerative disease.

3D Vector Reconstruction of the Typical Cervical Vertebra from Anatomical Sections of Korean Visible Human at the Laboratory of Clinical and Digital Anatomy of Paris Descartes University

Aim: To carry out a 3D vector reconstruction of the typical cervical vertebra from anatomical sections of the “Korean Visible Human” for educational purposes. Material and Methods: The anatomical subject was a 33-year-old Korean man who died of leukemia. He was 164 cm tall and weighed 55 kg. This man donated his body to science. Her body was frozen and cut into several anatomical sections after an MRI and CT scan. These anatomical sections were made using a special saw called a 0.2 mm thick cryomacrotome. Thus 8100 cuts were obtained. Only the sections numbered 940 to 1200 were used for our study. A segmentation by manual contouring of the different parts of the typical cervical vertebra was made using the software Winsurf version 3.5 on a laptop PC running Windows 7 equipped with a Ram of 8 gigas. Results: Our 3D vector model of the typical cervical vertebra is easily manipulated using the Acrobat 3DPDF interface. Each part of the vertebra accessible in a menu can be displayed, hidden or made transparent, and 3D labels are available as well as educational menus for learning anatomy. Conclusion: This original work constitutes a remarkable educational tool for the anatomical study of the typical cervical vertebra and can also be used as a 3D atlas for simulation purposes for training in therapeutic gestures.

Removal of the Shadow of Cervical Vertebrae from Panoramic X-Ray Images with a Tomosynthesis Method

The purpose of this study is to remove the shadow of cervical vertebrae from dental panoramic x-ray images with a tomosynthesis method and improve the contrast of details in both the teeth and jaw bones. To measure the shift-amount at each angular position that was required for reconstruction of panoramic x-ray images of the dental arch, strip images of a calibration phantom were acquired. Then, a shift-amount table was prepared from these images, and the other shift-amount table, which was used to reconstruct a panoramic image of the cervical vertebrae, was prepared by inverting the curve of the shift-amount table upside down. Using these two tables, images focused on the dental arch and cervical vertebrae of a patient were made with the original strip data of the patient. The shadow of the cervical vertebrae appearing on the image focused on the dental arch was removed using the two above-mentioned images and blurring functions defined at two focusing geometries. The validity of the proposed method was evaluated with clinically acquired data of two patients. The shadow of the cervical vertebrae was successfully eliminated, and the contrast of the front teeth and detailed structures of the jaw bones was improved. The results of the experiments showed that our proposed method was significantly effective in removing the shadow of the cervical vertebrae from conventional panoramic x-ray images.

Structural Changes in Vertebrae of Mice Based on Experimental Model of Rheumatoid Arthritis

Studies have shown that autoimmunity causes pathogenesis of more than 100 diseases. Among these diseases, approximately 1-2% of the world’s population has rheumatoid arthritis disease, which is a chronic disease that affects 45 out of every 3000 people who have autoimmune diseases. The aim of this research is to address the possible treatment of rheumatoid arthritis disease by comparing and contrasting the effectiveness and influence that treatments have on treating the disease. This study will be conducted by inducing the following treatments: ibuprofen and Boigor-10 on model animal subjects (mice) to determine the outcomes of the treatment. We will assess the outcomes by investigate the structural changes on vertebrae and joints of these subjects and the clinical manifestation score of each treatment. We hypothesize that these treatments will improve the treatment of rheumatoid arthritis disease. Furthermore, we hope that this research contributes to further understanding autoimmune disease and promotes proper treatment of the disease.

Surgical strategy for high-grade isthmic spondylolisthesis of 5th lumbar vertebrae

Objective To investigate surgical strategy for high-grade isthmic spondylolisthesis(more thanⅡ degree)of 5th lumbar vertebrae.Methods From August 2003 to October 2008,26 patients with high-grade isthmic spondylolisthesis (L5) were

Submandibular retropharyngeal cervical vertebra hook-plate for the treatment of C2 vertebral body tumors

Objective To evaluate the clinical results of sub-mandibular retropharyngeal cervical vertebrahook-plate (RCHP)reconsruction for the treatment of of C2 vertebral body tumors.Methods Nine patents with C2 vertebral body tumors

Clinical application of improved 2D computer-assisted fluoroscopic navigation through simulating a 3D vertebrae image to guide pedicle screw internal fixation

Objective To study the effect of using improved 2D computer-assisted fluoroscopic navigation through simulating 3D vertebrae image to guide pedicle screw internal fixation.Methods Posterior pedicle screw internal fixation,distraction

Treatment of Thoracolumbar Vertebrate Fracture by Transpedicular Morselized Bone Grafting in Vertebrae for Spinal Fusion and Pedicle Screw Fixation

To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction,short-segment pedicle screw fixation was reinforced with posterior mosel-izee bone grafting in vertebrae for spinal fusion in patients with thoracrolumbar vertebrate fractures.Seventy patients with thoracrolumbar vertebrate fractures were treated by short-segment pedicle screw fixation and were randomly divided into two groups.Fractures in group A(n=20) were reinforced with posterior morselized bone grafting in vertebrae for spinal fusion,while patients group B(n=50) did not receive the morselized bone grafting for bone fusion.The two groups were compared in terms of kyphotic deformity,anterior vertebral height,instrument failure and neurological functions after the treatment.Frankel grading system was used for the evaluation of neurological evaluation and Denis scoring scale was employed for pain assessment.The results showed that the kyphosis correction was achieved in both group A and group B(group A:6.4 degree;group B:5.4 degree)/At the end of follow-up,kyphosis correction was maintained in group A but lost in group B(P=0.0001).Postoperatively,greater anterior height was achieved in group A than in group B(P<0.01).During follow-up study,anterior vertebral height was maintained only in Group A(P<0.001).Both group A and group B showed good Denis pain scores(P1 and P2) but group A outdid group B in terms of control of severe and constant pain(P4 and P5).By Frankel criteria,the changes in neurological functions in group A was better than those of group B(P<0.001).It is concluded that reinforcement of short-segment pedicle fixation with morselized bone grafting for the treatment of patients with thoracolumbar vertebrae fracture could achieve and maintain kyphosis correction,and it may also increase and maintain anterior vertebral height.Morselized bone grafting in vertebrae offers immediate spinal stability in patients with thoracolumbar vertebrate fractures,decreases the instrument failure and provides better postoperative pain control than without the morselized bone grafting.

Twenty One Cases of Vertebral-Artery-Type Cervical Spondylosis Treated with Acupuncture and Moxibustion

The vertebral-artery-type cervical spondylosis iscommonly encountered in the middle aged and oldpeople.The author has treated 21 cases of vertebral-artery-type cervical spondylosis by acupuncture andmoxibustion,with the other 19 cases treated only byacupuncture as the controls.The results are reportedas follows.Clinical

Quantitative trait loci for the number of vertebrae on Sus scrofa chromosomes 1 and 7 independently influence the numbers of thoracic and lumbar vertebrae in pigs

Although quantitative trait loci(QTLs) for number of thoracic-lumbar vertebrae have been identified on Sus scrofa chromosomes(SSCs) 1 and 7, the influence of these QTLs on the thoracic and lumbar vertebrae is not clear. The aim of this study was to identify single nucleotide polymorphisms(SNPs) associated with total number of thoracic-lumbar vertebrae and for each trait(number of thoracic and lumbar vertebrae) separately. A total of 581 individuals from an F2 Large White×Minzhu population were genotyped using an SNP60 K chip. Performing a genome-wide association study(GWAS) for total number of thoracic-lumbar vertebrae, 38 significant SNPs were identified in two QTL regions located on SSC1 and SSC7. Performing a GWAS for number of thoracic vertebrae only, 72 significant SNPs were located on SSC7. While performing a GWAS for number of lumbar vertebrae only, 17 significant SNPs were identified on SSC1. Gene mining suggested that the gene encoding orphan nuclear receptor, germ cell nuclear factor(NR6A1) on SSC1 was a strong candidate affecting the number of lumbar vertebrae in pigs. Additionally, genes encoding vertnin(VRTN), prospero homeobox 2(PROX2), Finkel-Biskis-Jinkins murine osteosarcoma viral oncogene homolog(FOS), and transforming growth factor beta 3(TGFB3) may be important candidates affecting the number of thoracic vertebrae in pigs. QTLs on SSC1 and SSC7 independently influenced the numbers of thoracic and lumbar vertebrae. These results shed light on the complex genetic background of vertebrae development in pigs.